PASCO ME-6743 User Manual

Instruction Sheet
for the P ASCO
Model ME-6743

CART ADAPTER ACCESSOR Y

012-06877A

08/98
$1.00

anchoring bolt

anchoring nut

thumbscrews

Introduction

The PASCO ME-6743 Cart Adapter Accessory is
used to attach the PASCO CI-6742 Motion Sensor II
to the PASCO Dynamics Carts and Motorized Carts.

Procedure

1. Attach the plate of the Cart Adapter Accessory

with the two thumbscrews (Figure 1).

2. Attach the Motion Sensor to the anchoring bolt,

turning the Motion Sensor until it is lightly
tightened onto the bolt.

3. Orient the Motion Sensor in the desired direction.

4. Turn the anchoring nut in a counter-clockwise

direction until the Motion Sensor is firmly locked
into place.

© 1998 PASCO scientific

Motion Sensor II

Cart Adapter
Accessory

Dynamics Cart

Figure 1

A Motion Sensor attached to a Dynamics Cart with the Cart
Adapter Accessory

Cart Bracket Accessory 012-06877A

Limited Warranty

PASCO scientific warrants the product to be free from
defects in materials and workmanship for a period of
one year from the date of shipment to the customer.
PASCO will repair or replace, at its option, any part of
the product which is deemed to be defective in material
or workmanship. The warranty does not cover damage
to the product caused by abuse or improper use.
Determination of whether a product failure is the result
of a manufacturing defect or improper use by the
customer shall be made solely by PASCO scientific.
Responsibility for the return of equipment for warranty
repair belongs to the customer. Equipment must be
properly packed to prevent damage and shipped
postage or freight prepaid. (Damage caused by
improper packing of the equipment for return shipment
will not be covered by the warranty.) Shipping costs for
returning the equipment after repair will be paid by
PASCO scientific.

Address: PASCO scientific

10101 Foothills Blvd.
Roseville, CA 95747-7100

Phone: [phone]

FAX: [phone]

e-mail: [e-mail]

web: www.pasco.com

2