Partner PART T 250 INSTRUCTION MANUAL

INSTRUCTION MANUAL

IMPORTANT INFORMATION

GB

sure you understand them before using this unit. Retain these instructions for future
reference.

: Please read these instructions carefully and make

MANUEL D’INSTRUCTIONS

RENSEIGNEMENTS IMPORTANTS:

FR

atentivement les instructions et assurez--vous de les avoir comprises. Conservez
les instructions pour référence ultérieure.

Avant d’utiliser cet appareil, veuillez lire

BETRIEBSANWEISUNG

WICHTIGE INFORMA TI ON:

DE

Geräts aufmerksam durch. Verwenden Sie es erst, wenn Sie sicher sind, daß Sie
alle Anweisungen verstanden haben und gut aufbewahren.

Lesen Sie diese Hinweise zur Handhabung des

T250

MANUAL DE INST RU CCIONES

INFORMACIÓN IMPORTANTE:

ES

asegúrese de entenderlas antes de utilizar esta aparato. Conserve las instruc­ciones para la referencia en el futuro.

Lea atentamente las instrucciones y

LIBRETTO D’ISTRUZIONI

INFORMAZIONI IMPORT ANTI

IT

istruzioni e prendere dimestichezza con il prodotto prima di usario. Mantenga
queste istruzioni per riferimento futuro.

: Siete pregati di leggere attentamente questo

HANDLEIDING

BELANGRIJKE IMPORTANTS:

NL

zeker van dat uze begrijpt alvorens de trimmer te gebruiken en bewa ar ze voor
toekomstige raadpleging.

Lees deze instructies zorgvuldig en wees er

530163956 8/22/03

IDENTIFICATION (WHAT IS WHAT?)

ON/OFF
Switch

Starter
Handle

Fuel tank

Choke

Assist handle

Tube

Throttle

Assist handle adjustment

Muffler

Primer Bulb

Shield

IDENTIFICATION OF SYMBOLS

Manual

Trimmer head

Wrench

A. WARNING! This trimmercan be dangerous! Careless or improper use cancause

serious or even fatal injury.
B. Read and understand the instruction manual before using the trimmer.
C. Never use blades with this tool.

WARNING! The trimmer line can throw objects violently. You can be blinded or

D.

injured. Always wear eye protection.
E. Always use:

Ear protection

Protective glasses or visor
F. Assist handle to be positioned only below the arrow.
G. The operator of the machine must insure that noone comes within a 15 meter radius

while working. When several operators are working within the same area a safety dis-

tance of at least 15 meters must be observed.
H. Use unleaded or quality leaded petrol and two--stroke oil mixed at a ratio of 2.5%.
I. Engine ON/OFF Switch.
J. Sound power level
K. Max speed of output axle, rpm

2

SAFETY RULES

WARNING: When using gardening

appliances, basic safety precautions should al­ways be followed to reduce the risk of fire and
serious injury. Read and follow all instructions.

This power unit can be dangerous! Operator is
responsible for following instructions and warn­ings on unit and in manual. Read entire instruc­tion manual before using unit! Be thoroughly fa­miliar with the controls and the proper use of the
unit. Restrict the use of this unit to persons who
read, understand, and follow instructions and
warnings on unit and in manual. Never allow
children to operate this unit.

INSTRUCTION
MANUAL

DANGER: Never use blades, wire, or

flailing devices. This unit is designed for line
trimmer use only. Use of any other accessories
or attachments will increase the risk of injury.

WARNING: Trimmer line throws ob-

jects violently. You and others can be blinded/
injured. Wear safety glasses and leg protec­tion. Keep body parts clear of rotating line.

Safety Glasses or similar eye protection

Boots

Keep children, bystanders, and animals 15 me­ters away. If approached stop unit immediately.

If situations occur which are not covered in
this manual, use care and good judgement. If
you need assistance, contact yourauthorized
service dealer.

OPERATOR SAFETY

S Dress properly. Always wear safety

glasses or similar eye protection when op­erating, or performing maintenance, on
your unit (safety glasses are available).
Eye protection should be marked Z87.

S Always wear face or dust mask if operation

is dusty.

S Always wear heavy, long pants, long

sleeves, boots,and gloves. Wearing safety
leg guards is recommended.

SAFETY INFORMATION
ON THE UNIT

Hazard Zone

15 meters

S Always wear foot protection. Do not go

barefoot or wear sandals. Stay clear of
spinning line.

S Secure hair above shoulder length. Secure

or remove loose clothing or clothing with
loosely hanging ties, straps, tassels, etc.
They can be caught in moving parts.

S Being fully covered also helps protect you

from debris and pieces of toxic plants
thrown by spinning line.

S Stay Alert. Do not operate this unit when you

are tired, ill, upset or under the influence of al­cohol, drugs, or medication. Watch what you
are doing; use common sense.

S Wear hearing protection.
S Never start or run inside a closed room or

building. Breathing exhaust fumes can kill.

S Keep handles free of oil and fuel.

UNIT / MAINTENANCE SAFETY

S Disconnect the spark plug before performing

maintenance except carburetor adjustments.

S Look for and replace damaged or loose

parts before each use. Look for and repair
fuel leaks before use. Keep ingood working
condition.

S Replace trimmer head parts that are

chipped, cracked, broken, or damaged in
any other way before using the unit.

S Maintain unit according to recommended

procedures. Keep cutting line at proper
length.

S Use only 2 mm diameter Partner® brand

line. Never use wire, rope, string, etc.

S Install required shield properly before using

the unit. Use only specified trimmer head;
make sure it is properly installed and se­curely fastened.

S Make sure unit is assembled correctly as

shown in this manual.

S Make carburetor adjustments with lower

end supported toprevent line from contact­ing any object.

S Keep others away when making carburetor

adjustments.

S Use only recommended Partner® acces-

sories and replacement parts.

S Have all maintenance and service not ex-

plained in this manual performed by an au­thorized service dealer.

FUEL SAFETY

S Mix and pour fuel outdoors.
S Keep away from sparks or flames.
S Use a container approved for fuel.
S Do not smoke or allow smoking near fuelor

the unit.

S Avoid spilling fuel or oil. Wipe up all fuel spills.
S Move at least 3 meters away from fueling

site before starting engine.

S Stop engine and allow to cool before re-

moving fuel cap.

S Always store gasoline in a container ap-

proved for flammable liquids.

3

CUTTING SAFETY

WARNING: Inspect the area before

each use. Remove objects (rocks, broken
glass, nails, wire, etc.) which can be thrown
by or become entangled in line. Hard objects
can damage the trimmer head and be thrown
causing serious injury.
S Use only for trimming, scalping, mowing

and sweeping. Do not use for edging, prun­ing or hedge trimming.

S Keep firmfooting andbalance. Do not over-

reach.

S Keep all parts of your body away from muf-

fler and spinning line. Keep engine below
waist level. Ahot mufflercan cause serious
burns.

S Cut from your right to your left. Cutting on

left side of the shield will throw debris away
from the operator.

S Use only in daylight or good artificial light.
S Use only for jobs explained in this manual.

TRANSPORTING AND STORAGE

S Allow the engine to cool; secure unit before

storing or transporting in vehicle.

S Empty fuel tank before storing or transport-

ing the unit. Use upfuel left in thecarburetor
by starting engine and letting it run until it
stops.

ASSEMBLY

S Store unit andfuel inan area where fuelva-

pors cannot reach sparks or open flames
from water heaters, electric motors or
switches, furnaces, etc.

S Store unitso line limiter cannot accidentally

cause injury. Unit can be hung by the tube.

S Store the unit out of the reach of children

SPECIAL NOTICE: Exposure to vibra-

tions through prolongeduse of gasoline pow­ered hand tools could cause blood vessel or
nerve damage in the fingers, hands, and
joints of people prone to circulation disorders
or abnormal swellings. Prolonged use in cold
weather h asbeen linked toblood vessel dam­age in otherwise healthy people. If symptoms
occur such as numbness, pain, loss of
strength, change in skin color or texture, or
loss of feeling in the fingers, hands, or joints,
discontinue the use of this tool andseek med­ical attention. An anti-vibration system does
not guarantee the avoidance of these prob­lems. Users who operate power tools on a
continual and regular basis must monitor
closely their physical condition andthe condi­tion of this tool.

WARNING: Make sure unitis proper-

ly assembled and all fasteners are secure.
Examine parts for damage. Do not use dam­aged parts.
It is normal for the fuel filter to rattle in the
empty fuel tank.
Finding fuel or oil residue onmuffler is normal
due to carburetor adjustments and testing
done by the manufacturer.

ADJUSTING THE HAND LE

WARNING: When adjusting the han-

dle, be sure it remains between the trigger
and the safety label. Assist handle must be
positioned only below the arrow.

1. Loosen wing nut on handle.

2. Rotate the handle onthe tube to an upright
position; retighten wing nut.

ATTACHING THE SHIELD

WARNING: The shield must be prop-

erly installed. The shield provides partial
protection from the risk of thrown objects to
the operator and others and is equipped with
a line limiter which cuts excess line. The line
limiter (on underside of shield) is sharp and
can cut you.

1. Remove nut from shield.

2. Insert bracket into slot on shield.

3. Pivot shield until bolt passes through hole
in bracket.

4. Reinstall nut and tighten securely with
wrench (provided).

Shield

Line Limiter Blade

4

Slot

Bracket

Nut