Before you begin ..................................................................................................................................... 7
Set up ............................................................................................................................................ 7
Identifying the type of connection .................................................................................................. 8
Installing the Parrot Audio Suite .................................................................................................... 9
Establishing the connection with SES / WPS ............................................................................... 9
Establishing the connection without SES / WPS .......................................................................... 9
Using the Zikmu with a computer connected to the access point via an Ethernet cable ............ 10
Using the web interface ............................................................................................................... 11
Updating the Zikmu with a PC via Wi-Fi ................................................................................................ 27
Updating the Zikmu with a PC via Bluetooth ......................................................................................... 27
Before you begin ......................................................................................................................... 27
Widcomm Bluetooth software ..................................................................................................... 27
Toshiba Bluetooth software ......................................................................................................... 28
Updating the Zikmu with a Mac ............................................................................................................. 29
4
Getting
started
Connection to
mains supply
Plug both speakers into an
electrical outlet using the
provided power cables.
Remote control
Insert the remote control
battery into the specific battery
compartment.
Installation
Positioning the Zikmu
To get the best possible sound performances, we advise you to respect the following
recommendations:
Make sure that you correctly install the speakers at their respective positions: the iPod /
iPhone docking station must be on your right.
To get an accurate reproduction of the bass frequencies, make sure there is a minimal
distance of 40 cm between the back and lateral walls and the speaker. Bass frequencies
will get louder if you place your speakers closer to the walls.
The sound quality of the Zikmu can be degraded if there is an obstacle or a wall between
both speakers. Reposition your speakers if necessary.
Installation
5
WARNING
- Use only a CR2032 battery.
- Dispose of used batteries in compliance with current recycling legislation in the country of use.
Maintenance and precautions
To remove dust and fingerprints from the speakers, use a damp cloth.
Do not use any kind of cleaning agent on the Zikmu.
The Zikmu is a high technology product. Please handle the speakers with care.
Commands
Turning the speakers on / off
Press the button of the remote control or control panel to turn on / off the speakers.
Selecting an audio source
The Zikmu allows you to use several types of audio sources: PC connected via Wi-Fi,
computer or audio player connected via Bluetooth, iPod/iPhone, analogue audio player
connected via a Jack / Cinch audio cable.
Press the SOURCE button of the remote control to switch among the active audio
sources.
6
Increase volume
Press the button
Decrease volume
Press the button
Mute the speakers
Press thebutton
If you start playing a music file from a second source:
- this source is automatically selected ;
- the music currently played from the first source is automatically suspended if
it this first source is an iPod / iPhone or an audio player connected via
Bluetooth.
Adjusting the volume
7
Wi-Fi
WARNING: The performance of the Zikmu depends highly on the performance of your modem
/ router.
Operating system
The Zikmu is compatible with the Windows XP (SP2 and later),
Windows Vista SP1 and Windows 7 operating systems.
Wi-Fi access point
You need an access to the internet to download the
necessary software and a Wi-Fi access point to establish
the connection with the Zikmu.
The sound quality of the Zikmu can be degraded if there is
an obstacle or a wall between both speakers. Reposition
your speakers if necessary.
Before you begin
Set up
8
Identifying the type of connection
WARNING: Make sure you do not mistake the WPS button with a pairing button.
WPS routers
The type of connexion you have to establish with the Zikmu depends on the model of your modem /
router: you have to determine whether it supports the SES or WPS technologies.
WPS (Wi-Fi Protected Setup) or SES (Secure Easy Setup) technologies allow you to
establish a secured connection between several Wi-Fi devices simply by pressing a
button.
To find out whether your modem supports SES or WPS technologies, refer to the
documentation of your device. If you do not have this documentation:
- your modem / router cannot support these technologies if you were equipped with
it before 2007 ;
- there is a WPS button on WPS modems or routers.
►If your modem / router supports SES or WPS technologies, refer to the Establishing a connection
with SES / WPS section.
► If your modem / router does not support SES or WPS technologies, refer to the Establishing a
connection without SES / WPS section.
9
Description
The Parrot Audio Suite is composed of the Parrot Sound Manager and
Parrot Audio Configuration Tool software.
The Parrot Sound Manager software allows you to
establish the connection between your PC and the
speakers via Wi-Fi.
you to modify several audio and Bluetooth parameters.
► Refer to the Parameters section for more information.
Download
You can download the Parrot Audio Suite (for PC) at the
following address: http://www.parrot.com/starck
Installation
Install the software and follow the displayed instructions:
1. Select your language and click on OK.
2. Specify your preferences concerning the installation and
click on OK.
> At the end of the installation, a confirmation window is
displayed. You can click on Close.
2. Click on the icon at the bottom right
of your screen and select Add a new Wi-
Fi device.
> The connection window is displayed.
3. Select No then click on Next.
> A confirmation window is displayed.
Installing the Parrot Audio Suite
Establishing the connection with SES / WPS
If your modem / router supports the SES or WPS technology:
1. Press the SES or WPS button of your modem / router. Refer to the documentation or your
device for more information.
2. Press the button of the Zikmu.
> The Zikmu is now connected to your Wi-Fi network.
Establishing the connection without SES / WPS
1. Press the pairing button of your modem / router. Refer to the documentation or your device for
more information.
Loading...
+ 20 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.