PARROT RNB5 User Manual
Quick start guide
Guide d'utilisation rapide
Guía de utilización rápida
Bedienungsanleitung
Guida all'uso
Gebruikershandleiding
Manual do utilizador
Parrot ASTEROID Smart
English
...........................................................................................................11
Français
...........................................................................................................27
Español
...........................................................................................................43
Deutsch
...........................................................................................................59
Italiano
...........................................................................................................77
Dutch
...........................................................................................................93
Português
...........................................................................................................109
www.parrot.com
www.parrotasteroid.com
456
Parrot ASTEROID Smart
Supports latéraux
Side brackets
Soportes laterales
Seitliche Halterungen
Supporti laterali
Zijsteunen
Suportes laterais
Adhesiv e tape
Adhésif
Adhesiv o
Klebstoff
Adesiv o
Adesiv o
Plakband
Microphone
Microphone
Micrófono
Mikrofon
Microfono
Microfoon
Microfone
Support de montage
Holder
Soporte de montaje
Montagegestell
Supporto di montaggio
Montagesteun
Suporte de montagem
Vis
Screws
Tornillo
Schrauben
Viti
Schroef
Parafuso
Dongle GPS
GPS dongle
Dongle GPS
GPS-Empf ängers
Antenna GPS
GPS-Dongle
Dongle GPS
Rallonge câble f rein à main
Parking brake cable extension lead
Alargador de cable de freno de mano
Verlängerungskabel für Handbremse
Prolunga cavo f reno a mano
Verlengkabel voor handrem
Extensão do cabo do travão-de-mão
Cadre
Trim ring
Marco
Rahmen
Telaio
Frame
Quadro
Carte SD - Parrot ASTEROID Map
SD Card - Parrot ASTEROID Map
Tarjeta SD - Parrot ASTEROID Map
SD-Karte - Parrot ASTEROID Map
Scheda SD - Parrot ASTEROID Map
Cartão SD - Parrot ASTEROID Map
SD-kaart - Parrot ASTEROID Map
Câble ISO
ISO cable
Cable ISO
ISO-Kabel
Cav o ISO
ISO-Kabel
Cabo ISO
Câbles USB
USB cables
Cables USB
USB-Kabels
Cav os USB
USB-Kabels
Cabos USB
Rallonge USB / iPod
USB / iPod cable extension
Alargador de cable USB / iPod
Verlängerungskabel für USB / iPod
Prolunga cavo USB / iPod
Verlengkabel voor USB / iPod
Extensão do cabo UBS / iPod
Cable fastener
Serre câble
Sujetacable
Kabelklemme
Fascetta serracav i
Kabelklem
Braçadeira de cabo
7891011English
Quick start
guide
Before you begin
Installation
Getting started
Phone
Music
Internet
Video
Troubleshooting
General information
p.11
p.12
p.15
p.17
p.18
p.20
p.22
p.23
p.24
Before you begin
indicated on the notification bar.
Content
About this guide
In order to limit our paper consumption and as
part of our environmentally friendly and
responsible approach, Parrot prefers to put
user documents online rather than print them
out. This simplified guide to the Parrot
ASTEROID Smart is therefore limited to
providing you with the main instructions that
will make it easy for you to use the device.
More information can be found on the support
section of our website, www.parrot.com: the
full manual, FAQs, tutorials, and more.
Note: iPod®, iPhone® (in iPod mode) and iPad®
will be referred to as an "iPod" in this manual.
Softw are updates
Download the latest update for free (and
consult the update procedure) on the Parrot
ASTEROID Smart support page on our website
www.parrot.com. These updates will enable
you to receive new features and improve the
product’s compatibility.
Note: You can also download the Parrot
ASTEROID Smart's updates while connected to
the Internet. The availability of an update is
Warnings
All functions requiring an increased attention
should only be used while the vehicle is
stationary. Your safety and the one of the other
road users prevails over phone calls, music and
driving assistance applications. Be responsible:
drive carefully and pay full attention to your
surrounding. Parrot denies any liability should
you choose not to respect this warning.
Use the Parrot ASTEROID Smart with a
reasonable volume level so that you can hear all
external noises while driving.
The Parrot ASTEROID Smart includes NdFeB
magnets which can damage objects sensitive to
magnetic fields (pacemakers, credit cards,
mechanical clocks…).
The Parking Brake wire of Parrot ASTEROID
Smart's ISO cable detects whether or not the
parking brake is on. It must be connected
following the installation instructions provided
in this document. Incorrect installation or
connection may be dangerous and illegal in
many states / countries. Under no
circumstances should the screen within the
driver's field of vision broadcast any videos
while the vehicle is moving. The same applies
to any applications other than those for driving
or navigation assistance.
If you attempt to use an application that is not
intended for navigation or driving assistance
when you are driving, an on-screen warning will
be displayed. To watch a video on the Parrot
ASTEROID Smart's screen, make sure that the
vehicle is stopped in a safe area and that the
parking brake is on.
Steering wheel control interface
A steering wheel control interface can be used
to connect your vehicle’s steering wheel
controls to your Parrot car stereo. With this
interface, you will be able to make phone calls
via the steering wheel controls while keeping
your hands on the wheel. Refer to our website
www.parrot.com for more information.
Installation
Note: We advise our customers to have the
Parrot ASTEROID Smart fitted by a professional.
Safety instructions
Turn the ignition off before installing the
Parrot ASTEROID Smart.
Do not install the Parrot ASTEROID Smart
where it may injure the driver or a passenger if
the vehicle stops suddenly.
Do not install the Parrot ASTEROID Smart
where it may interfere with the driver
operation of the vehicle.
Do not drill holes in the dashboard or any panel
without first making sure there is nothing
behind it. Do not damage any fuel line,
electronic component or cable.
If you need to use screws, do not allow them to
come into contact with any power cable.
Install the Parrot ASTEROID Smart only on
vehicles with a 12 V battery.
Place all cables away from hot places (heater
outlet) and moving parts (gear shift, seat
rails...). Make sure they will never wind around
the steering column or gearstick.
Confirm the proper function of your vehicle's
other equipment after installing the Parrot
ASTEROID Smart.
Do not install the Parrot ASTEROID Smart or
one of its components where the airbag may
deploy.
Do not install the Parrot ASTEROID Smart in
places subject to high temperatures or
humidity.
Make sure you leave enough space behind the
Parrot ASTEROID Smart once installed so that
proper heat dispersal is ensured.
Before you begin
Remove your car stereo from your vehicle. You
may need release keys to do so.
Try to connect the audio and power connectors
of the Parrot ASTEROID Smart to the
connectors of your vehicle. If this connection is
impossible, you have to obtain an ISO adapter
before installing the Parrot ASTEROID Smart.
Refer to the Vehicle compatibility section on
the Parrot ASTEROID Smart support page for
more information.
Compare the Parrot ASTEROID Smart antenna
connector to the antenna connector of your
vehicle. If an adapter is necessary, contact your
12 English
local car audio specialist.
The GPS receiver antenna is located
on the side where "Parrot
ASTEROID GPS" is written and
where the star-shaped logo is. This
logo must always be directed
towards the sky.
Note : Make sure you also supply power to your
antenna if it is amplified. Power to the antenna
can be supplied using the Parrot ASTEROID
Smart ISO cable.
Installation using the holder
Loosen the 4 screws to remove the Parrot
1.
ASTEROID Smart holder.
Insert the holder into the dashboard. To do
2.
so, bend the tabs 90 degrees (diagram A p.7)
Install the Parrot ASTEROID Smart and
3.
fasten the screws (diagram B p.7).
Attach the trim ring (diagram C p.8).
4.
Installation using the side screw holes
Loosen the 4 screws to remove the Parrot
1.
ASTEROID Smart holder.
Remove the two side brackets (diagram D
2.
p.8).
Position the Parrot ASTEROID Smart so
3.
that its screw holes are aligned with the
screw holes of the bracket.
Tighten as many screws as necessary
4.
depending on the model of your vehicle.
Only use the provided screws.
Installing the GPS receiver
Stick the GPS receiver in an unobstructed area
inside the car.
Athermic windshields and windows with a
built-in antenna can interfere with GPS
reception and reduce the reliability of
information from navigation applications.
If your vehicle has an athermic windshield, stick
the GPS receiver on the windshield on the non
athermic area. The side where the star-shaped
logo is must be stuck on the windshield
(diagram F p.9).
Note : The non athermic area of the windshield
depends on the model of your vehicle. It is
usually located near the rear view mirror.
If your vehicle does not have an athermic
windshield, stick the GPS receiver on the
dashboard. The side where the star-shaped
logo is must be visible (diagram E p.9).
To make sure the adhesive tape adheres well :
use the provided adhesive tape ;
clean the area with an appropriate cleaning
product before sticking the support ;
once you have stuck the support on the
dashboard, wait for approximately 2 hours
without handling it.
Connecting the parking brake lead
The parking brake lead allows you to use the
Parrot ASTEROID Smart video function or
applications only when the parking brake is set.
If this cable is not connected to your vehicle
parking brake system, the video function will
not be available.
Connect the parking brake extension lead
1.
to the Parrot ASTEROID Smart green
cable.
Locate and test the parking brake signal
2.
cable in the vehicle. This cable connects
your parking brake to the parking brake
signal on your dashboard.
Route the Parrot ASTEROID Smart parking
3.
brake extension lead (green) safely and
securely from the Parrot ASTEROID Smart
and connect this to the parking brake signal
cable using a suitable method.
13English
Warning: An improper connection or use of this
cable is dangerous and illegal in many states.
Installing a rear view camera
If you are to use the Parrot ASTEROID Smart
with a rear view camera (not provided), the
orange cable on the Parrot ASTEROID Smart
ISO cable will detect when the gearstick is
moved to "reverse". Connect this cable to the
one providing power to the reverse lamp of
your vehicle in order to display the rear view
camera image when backing your vehicle.
Connect the rear view camera video cable to
the Video CAM connector located at the back
of the Parrot ASTEROID Smart.
Installing the microphone
The optimum location for the microphone is in
the centre of the vehicles roof near the rear
view mirror. The microphone ideally needs to
be less than 60cm’s from the users mouth
pointing directly towards them with no
obstructions.
Please take care when routing the microphone
cable through the vehicle to the desired
location, we recommend routing alongside
existing manufacture’s wiring looms securing as
you go making sure the microphone cable is not
pinched or trapped.
Warning: Do not run the microphone cable in
such a way as to obstruct or interfere with the
vehicles operation or cause injury to its
occupants. In particular vehicle safety device
such as airbags and other SRS systems.
ISO cable connection
Connect the audio and power connectors of the
Parrot ASTEROID Smart to the ones of your
vehicle.
Note: Use the provided cable ties to make sure
the cables are well fixed to the car stereo. Insert
one of the cable ties into the slots in the top of
the back of the car stereo (refer to the diagram
p.4).
Once the connections are made, check your
installation. To do so, turn the ignition on then
off. The "Goodbye" message must be
displayed. If it is not the case, it is necessary to
swap the positions of the red and yellow wires.
Indeed, the red wire of the power cable must
be connected to the 12V ignition, the yellow
wire to the permanent 12V and the black wire to
the ground. This can be done simply by
reversing both bullet connectors located on the
Parrot wiring.
Installing the USB cables
Connect the USB cables to the Parrot
ASTEROID Smart. We recommend you
connect all audio cables to the Parrot
ASTEROID Smart even if you do not plan on
using them. Route the audio cables to a
suitable location in your vehicle such as the
glove box or arm rest compartment. It may be
necessary to drill a hole in your dashboard to do
so. Avoid using USB extension cables.
The USB cable (1.2m - 2A) to which you will
connect the USB / iPod cable extension must
be connected to its specific white USB port.
"iPod" is written above it.
To guarantee an optimal reception quality we
recommend you do not connect your internet
USB key 3G on the Parrot ASTEROID Smart
directly : use the USB cable to install your
device on the dashboard (or any other open
area).
Basic operations
The Parrot ASTEROID Smart faceplate can be
removed to protect your unit from theft. The
Parrot ASTEROID Smart cannot work without
its faceplate.
14 English
Handle the faceplate with care. Do not force
while installing or removing it. Keep it away
from sunlight, humidity or high temperatures.
To remove the faceplate, hold down the button
on the top left and slide it downwards (diagram
G p.10).
To replace the faceplate, insert its magneted
inferior part then press the superior part until
you hear a click.
Getting started
Home screen
Slide your finger horizontally to the left. You
will discover more space for adding functions
shortcuts.
Touch an icon to get to the corresponding
function. Touch the Applications icon for
instance. The list of the available applications
is displayed. Slide your finger downward to
browse through the applications list.
Press to get back to previous menu. Press
to get to the home screen.
Press to access the pop-up menu
corresponding to the current application. The
pop-up menu allows you to change several
settings or to access more functions.
Press to display the last applications used
or currently in use.
Press to adjust the volume. Then slide the
cursor to the left or to the right.
Personalizing the home screen
To add an application shortcut on your home
screen:
Tap Applications.
1.
Press and hold the application icon you are
2.
interested in.
Drag the icon to the home screen where
3.
you want to add it.
To remove an application shortcut:
Press and hold the shortcut you want to
1.
remove.
Drag the icon upwards to the Remove
2.
indication. When the icon turns red, lift
your finger.
Changing settings
To change the Parrot ASTEROID Smart
settings, tap Applications, then Settings. You
can also tap , then Settings.
15English
Connecting a phone via Bluetooth
Note : Refer to the compatibility page of our
website to check if your phone is compatible
with the Parrot ASTEROID Smart and to consult
the specific pairing procedures for the most
common phones : www.parrot.com/uk/
compatibility.
If you are using the Parrot ASTEROID Smart
with your phone for the very first time, you
must initially pair both devices. Once your
telephone is paired with the Parrot ASTEROID
Smart, the 2 devices will automatically connect
when they are turned on (as well as
Bluetooth®
features) and in proximity of each other.
In the Settings menu, press Wireless &
1.
networks > Bluetooth.
If necessary, activate the
2.
Bluetooth
and
Discoverable options.
From your phone, search for
3.
Bluetooth
peripherals and select «Parrot ASTEROID
Smart».
The pairing procedure depends on which
4.
telephone model you have:
If the phone asks you to enter the
Bluetooth
PIN code, enter “0000”.
If the Parrot ASTEROID Smart and
your telephone display two codes,
verify that the codes are identical,
then either confirm or invalidate.
Note: Depending on the model of your phone,
you may need to authorize the connection to the
Parrot ASTEROID Smart to allow further
automatic connections. Refer to the user guide
of your phone for more information.
Connecting two phones
To activate multipoint telephony and connect
two phones :
Tap Phone.
1.
Tap , then Bluetooth > Options.
2.
Activate the Multipoint Telephony option.
3.
When the Parrot ASTEROID Smart is switched
on, it attempts to connect to all paired phones
in the vehicle. If there are more than two paired
phones in the vehicle, the device connects to
the two phones with the oldest pairing.
When two phones are connected to the Parrot
ASTEROID Smart, one of them becomes the
main phone and the other is the secondary
phone. By default, the main phone is the one
with the oldest pairing to the Parrot ASTEROID
Smart.
You can receive calls to the main or secondary
phones.
Only the phonebook for your main phone may
be accessed through the Parrot ASTEROID
Smart. You can only make calls using the main
phone. However, you can easily switch
between the connected phones. To do so :
Tap Phone.
1.
Tap , then Phone.
2.
Select the main phone.
3.
Synchronising the phonebook
With most of the
Bluetooth
phones, the
phonebook is automatically synchronized in the
system’s memory. Each time you change your
directory, synchronisation will start
automatically the next time it is connected.
Warning: Only the contacts stored in the phone
memory are synchronized. If your contacts are
stored in your SIM card memory, transfer them
onto your phone memory.
The automatic synchronization is limited to
5000 contacts (or phone numbers) for each
paired phone.
16 English
Phone
Receiving a call
An incoming call is indicated by a ringtone. The
name of the caller is announced if his number is
recorded in the phonebook of the phone
connected to the Parrot ASTEROID Smart.
If you want to answer the call, tap the
green button on the Parrot ASTEROID
Smart screen. Then tap the red button to
end the call.
If you want to refuse this call, tap the red
button.
Making a call via voice recognition
You can make a call using voice recognition
directly after automatic synchronization. The
Parrot ASTEROID Smart will automatically
recognize the contact you wish to call.
Tap Voice Command > Contacts to launch
1.
the voice recognition feature.
> The Parrot ASTEROID Smart asks you the
name of the contact you want to call.
Say the name of the contact and the type of
2.
number («WORK», «CELLPHONE»...) if
there are several numbers associated to your
contact.
> The call is automatically launched if the
voice tag is correctly understood. If it is not
the case, a confirmation message is asked.
Confirm by saying «YES» or «CALL».
Note: At any time, press the the button to exit
voice recognition mode.
Music
Note: Several minutes of loading may be
necessary when connecting your audio
peripheral (USB / SD / iPod) to the Parrot
ASTEROID Smart for the first time, particularly if
you are using audio peripheral with a large
capacity or containing many audio files. This
loading time will allow your audio files to be
accessible via voice recognition.
Using vocal music search
The voice recognition function allows you to
select the artist / album you want to hear via
voice recognition. This function is only
available if you are using the Parrot ASTEROID
Smart with a USB / SD / iPod peripheral or
music applications compatible with this
feature.
Tap Voice Commands > Music.
1.
Say the name of the artist / album when
2.
asked to do so.
> The list of audio sources connected to
the Parrot ASTEROID Smart and
applications compatible with the vocal
music search function which contain the
artist / album that you selected will
appear.
17English
Note: Check the albums and artists names in the
metadatas of your music files. These names may
be different from the ones displayed on your
music files titles.
Radio
Tap Music >Tuner.
1.
Slide the slider to the left / right to change
2.
the radio station.
To get the list of all available stations:
Tap Music >Tuner.
1.
Press the button and select New scan
2.
> OK.
Tap Music > Tuner.
1.
Select the frequency manually or in
2.
Fullscan mode.
Press the button then select Add to
3.
presets.
> To select a stored station, select the
Presets mode.
Note: You can store as many stations as you
want.
iPod
1. Connect the USB / iPod extension lead to
the USB cable connected to the white USB
port and connect your iPod to it.
2. Tap Music > iPod. You can also tap Browse
to browse through the content of your iPod.
3. Tap a track to start playback.
USB storage device
The Parrot ASTEROID Smart is compatible
with the majority of USB keys / MP3 audio
player / external hard drive. There is no
restriction in terms of capacity of USB keys.
Only MP3, AAC or WMA formats are
supported.
Connect your USB storage device to the
1.
Parrot ASTEROID Smart using the USB
cable or the USB connectors on the back of
the car stereo
Tap Music > USB. You can also tap Browse
2.
to browse through the content of your
USB device.
Tap a track to start playback.
3.
SD card
The SD card capacity must not exceed 32Gb.
Only MP3, AAC, WAV, OGG or WMA formats
are supported.
Note : To remove the SD card, put a fingernail
into the ridge on the exposed end of the SD card.
Remove the Parrot ASTEROID Smart
1.
faceplate.
Insert the SD card into the appropriate slot
2.
with the contact surface facing left
(diagram H p.10).
Reattach the faceplate.
3.
Tap Music > SD. You can also tap Browse
4.
to browse through the content of your SD
card.
Tap a track to start playback.
5.
Audio player connected via Bluetooth
Note : The Parrot ASTEROID Smart allows you to
use the telephone and audio streaming
functions from 2 different phones without
having to disconnect one of them.
You can use the Parrot ASTEROID Smart to
listen to songs stored on your mobile phone or
Bluetooth
audio device. To do so, your phone /
18 English
audio device must support the
profile (Advanced Audio Distribution Profile).
If you are using a
first time, you have to pair both devices.
If both devices are already paired:
Tap Music > Bluetooth Audio.
1.
Start playing a song on your audio player.
2.
Screen commands
Bluetooth
Bluetooth
audio player for the
A2DP
While playing a music track or the radio:
tap the screen to pause / resume playback
or mute the radio ;
slide your finger upwards to increase the
volume ;
slide your finger downwards to decrease
the volume.
While playing a music track (except audio
players connected using a jack / jack cable):
slide your finger to the right to skip to the
next track ;
slide your finger to the left to get back to
the previous track.
Note : If you are using the Parrot ASTEROID
Smart with an audio player connected via
Bluetooth, these commands are only available if
your audio player supports the AVRCP profile
(Audio/Video Remote Control Profile).
Internet
Warning: Internet connection via a 3G key
requires a subscription offer with a telephone
operator. Using this service can result in
significant roaming charges. Check the
conditions of your subscription and
consumption tracking with your operator.
Parrot disclaims any liability for associated
costs.
Connection with a 3G/4G key
Note : Refer to the compatibility section of our
website to see the list of 3G / 4G keys that are
compatible with the Parrot ASTEROID Smart.
Connect a 3G key to the Parrot ASTEROID
1.
Smart with a USB cable.
> A pop-up will appear.
Note : To ensure optimum reception quality, do
not connect your 3G/4G key to the back of the
Parrot ASTEROID Smart: use a USB cable to
install the accessory on the dashboard (or any
other unobstructed area).
Enter your PIN code using the knob, then
2.
select ENTER. Check the Memorise PIN
code option if you would like your PIN
code to be stored each time you turn on
19English
the Parrot ASTEROID Smart.
Note: You will be able to change this setting by
selecting Settings > Wireless and network
settings > Mobile data networks. Among the
mobile access devices, select your 3G / 4G key,
tap Forget PIN code > Forget.
Select your APN (Access Point Name)
3.
from the suggested list. This information
is available in the documentation provided
with your 3G / 4G key. If your APN is not in
the list, you can add it by selecting Settings
> Wireless and network settings > Mobile
data networks.
Among the mobile access devices, select
4.
your 3G / 4G key.
Select Access point > Other > Preset
5.
access points.
Wait approximately 30 seconds until the
6.
connection is established. You can also
press the button and browse the
menus while the connection is being
established.
Connection via Bluetooth
If you have a telephone that supports the
Bluetooth®
profile, DUN (Dial-Up Networking)
or PAN (Personal Area Network), the
Bluetooth
connecting your telephone to the
Parrot ASTEROID Smart will allow for sharing
of the telephone's 3G connection.
Note : Refer to the compatibility section of our
website to check if your phone allows the 3G
connection sharing via Bluetooth® and to
consult the corresponding procedure :
www.parrot.com/uk/compatibility.
Connect your telephone to the Parrot
1.
ASTEROID Smart via
On the Parrot ASTEROID Smart, select
2.
Bluetooth
.
Settings > Wireless and network settings >
Mobile networks settings > Mobile access
devices.
Select your APN (Access Point Name)
3.
from the suggested list, then check Select.
Press the button and select Connect.
4.
Allow connection sharing on your
5.
telephone. This procedure will vary
according to your telephone model.
Connection via USB
Note : Refer to the compatibility section of our
website to check if your phone supports 3G
connection sharing via USB and to consult the
corresponding procedure for the most common
phones : www.parrot.com/uk/compatibility.
Make sure that your phone’s keypad is
1.
unlocked, then connect the phone to the
Parrot ASTEROID Smart using the USB
cable/micro-USB provided with your
phone. You can also connect the phone
using the USB extension cable provided
with the Parrot ASTEROID Smart. This
connection also enables you to recharge
your phone’s battery.
Note: Do not use the white iPod USB port to
connect your phone to the Parrot ASTEROID
Smart.
Select your APN (Access Point Name)
2.
from the suggested list, then check the
option Select. You can then modify this
setting by selecting Settings > Wireless
and networks > Mobile data networks.
> A pop-up window indicating that USB
connection sharing has been activated will
appear.
20 English
Connection to a Wi-Fi network
If your smartphone can be used as a wireless
router or if a Wi-Fi® network is available next to
your vehicle:
Activate the hotspot function on your
1.
smartphone.
In the Parrot ASTEROID Smart Settings
2.
menu, tap Wireless & networks >Wi-Fi.
Activate the Wi-Fi option.
3.
> The list of available Wi-Fi networks is
displayed.
Select the Wi-Fi network generated by
4.
your smartphone.
Enter the password if necessary.
5.
Using the applications
Several types of applications are available with
the Parrot ASTEROID Smart : music,
geolocation, driver assistance...
All applications may not be available in all
countries. The use of some applications may
need prior subscription.
The Parrot ASTEROID Smart is a multitasking
device: several applications can run
simultaneously. For example, you can listen to
a Webradio station and use a driver assistance
application at the same time.
For more information about installing and using
the available applications, refer to the
ASTEROID Market web page :
www.parrotasteroid.com.
Video
Warning : The Parrot ASTEROID Smart video
function (besides the video stream from the rear
view camera) is dangerous and illegal in most
countries if it is used while driving. Consequently
this function is only available when the vehicle is
stationary. To watch a video on the Parrot
ASTEROID Smart, park your vehicle in a safe
place and set your parking brake.
Rear view camera
If your vehicle is equipped with a rear view
camera, you can use the Parrot ASTEROID
Smart screen to view the video stream of this
camera in order to ease your reverse parkings.
Consult the installation diagram p.4 and the
section "Installing a rear view camera" for more
information about the connection of the rear
view camera to the Parrot ASTEROID Smart.
The video stream of the rear view camera
appears automatically while backing up. The
image from the rear view camera may appear
reversed.
Note : At any time, tap Video switch to toggle
between the video from the rear view camera
and the video from an iPod connected with an
AV / iPod cable.
21English
Playback of a video via an external source
You can display on the Parrot ASTEROID Smart
the video output from an external video source.
Connect your video source to the Parrot
ASTEROID Smart using an AV / iPod cable
(which is not provided) (diagram p. 4).
Tap Applications > Video IN.
1.
Start the playback of a video on your
2.
source.
Note : At any time, tap Video switch to toggle
between the video from the rear view camera
and the video from an external source connected
with an AV / iPod cable.
Playback of a video via a SD card
The Parrot ASTEROID Smart allows you to
watch videos stored on a SD card. Only the
MP2, MP4, H263, H264, WMV and SPARK
formats are supported.
Insert the SD card into the appropriate slot
1.
(diagram H p.10).
Tap Applications > Gallery.
2.
Select the video by tapping the
3.
corresponding icon.
Screen connected to video output terminals
Video output terminals allow you to connect a
screen for rear seat passengers to view the
videos recorded on your SD card. Consult the
installation diagram p.4 for more information
about the connection of the screen for rear
seat passengers to the Parrot ASTEROID
Smart.
Warning : Never locate the screen where the
driver could see the videos while driving.
Troubleshooting
Before you begin
Make sure the “Goodbye” message is displayed
on the Parrot ASTEROID Smart screen when
you turn the ignition off. Refer to the Checking
the wiring section for more information.
Reset the Parrot ASTEROID Smart. To do so,
remove the faceplate then use a paper clip to
press the Reset button. Hold down the Reset
button for 3 seconds (diagram G p.10).
Make sure you have the latest software update
on your Parrot ASTEROID Smart. To do so,
select Settings > About > Version. Compare
this number with the one on the Parrot
ASTEROID Smart support page on our website.
Problems while using the phone function
Make sure your phone is compatible with the
Parrot ASTEROID Smart. To do so, refer to the
compatibility list of the Parrot ASTEROID
Smart available on our website
www.parrot.com, in the Support section.
If your phone is compatible with the Parrot
ASTEROID Smart and if you already have the
latest software update:
22 English
Erase the memory of the Parrot
1.
ASTEROID Smart. To do so, select
Settings > Advanced settings > Factory
settings.
On your telephone, erase the Parrot
2.
system from the list of
peripherals (or reboot your iPod).
Repeat the pairing procedure for the 2
3.
devices.
Problems while using the music function
Several minutes of loading may be necessary
when connecting your audio peripheral (USB /
SD / iPod) to the Parrot ASTEROID Smart for
the first time, particularly if you are using audio
peripheral with a large capacity or containing
many audio files. This loading time will allow
your audio files to be accessible via voice
recognition.
Reboot your iPod / iPhone before connecting it
to the Parrot ASTEROID Smart. To reboot your
iPod / iPhone (this procedure will not erase any
of your data) :
iPod: press Menu and the centre button
simultaneously until the iPod reboots.
iPhone / iPad / iPod touch®: Press the On/
Bluetooth
Off button and the Home button
simultaneously until the iPhone reboots.
Do not touch the screen when the
message “Slide to shutdown” appears.
Some problems may occur if the iPod / SD
card / USB device is already connected to the
Parrot ASTEROID Smart before you turn on the
ignition. Connect the iPod / SD card / USB
device once the ignition is turned on.
For more information
Refer to the Parrot ASTEROID Smart support
page on our website.
General information
Warranty
Without prejudice of legal warranty, Parrot
contractually warrants during 12 months from
the date of initial purchase by the consumer
(except wearing parts guaranteed for 6
months) that the product is free from defects
in materials and workmanship, upon
presentation of proof of purchase (date, place
of purchase, serial number of the product) to
the retailer or Parrot. During the contractual
warranty period, the defective product must be
returned in its original packaging to the aftersales service of the retailer. After inspection of
the product, Parrot will proceed, at its option,
to the replacement or the issue a credit note to
the exclusion of any other remedy.
Warranty does not cover: upgrading of the
software items of the Parrot products with
Bluetooth cell phones for compatibility
purpose, data recovery, deterioration of the
external aspect due to normal wear of the
product, any damage caused by accident,
misuse, misapplication, or non-Parrot
products.
Parrot is not responsible for storage, loss or
damaged to data during transit or repair. Any
23English
product wrongfully declared to be defective
will be returned to sender and inspection,
process and carriage costs will be invoiced to
him.
Correct disposal of This Product (Waste
Electrical & Electronic Equipment)
This marking shown on the product or its
literature, indicates that it should not be
disposed with other household wastes at the
end of its working life. To prevent possible
harm to the environment or human health from
uncontrolled waste disposal, please separate
this from other types of wastes and recycle it
responsibly to promote the sustainable reuse
of material resources.
Household users should contact either the
retailer where they purchased this product, or
their local government office, for details of
where and how they can take this item for
environmentally safe recycling. Business users
should contact their supplier and the terms and
conditions of the purchase contract. This
product should not be mixed with other
commercial wastes for disposal.
Modifications
The explanations and specifications in this
guide are given for information purposes only
and may be modified without prior notice. They
are deemed to be correct at time of going to
press. The utmost care has been taken when
writing this guide,as part of the aim to provide
you with accurate information. However,
Parrot shall not be held responsible for any
consequences arising from any errors or
omissions in the guide, nor for any damage or
accidental loss of data resulting directly or
indirectly from the use of the information
herein. Parrot reserves the right to amend or
improve the product design or user guide
without any restrictions and without any
obligation to notify users. As part of our
ongoing concern to upgrade and improve our
products, the product that you have purchased
may differ slightly from the model described in
this guide. If so, a later version of this guide
might be available in electronic format at
Parrot’s website at www.parrot.com.
FCC Compliance Statement
This device complies with part 15 of the FCC
rules. Operation is subject to the following two
conditions:
(1). this device may not cause harmful
interference, and
(2). this device must accept any interference
received, including interference that may cause
undesired operation.
Note: The manufacturer is not responsible for
any radio or tv interference caused by
unauthorized modifications to this equipment.
Such modifications could void the user’s
authority to operate the equipment.
Canada Class B statement: This Class B digital
apparatus complies with Canadian ICES-003.
Copyrights
Identification N. 394 149 496 R.C.S. PARIS
Parrot S.A.
Copyright © 2012 Parrot. All Rights Reserved.
Declaration of Conformity
We, Parrot S.A. 174 quai de Jemmapes, 75010
Paris, France, declare under our sole
responsibility that our product, the Parrot
ASTEROID Smart to which this declaration
relates is in conformity with appropriate
standards IEC/EN 60065: 2002 / A1:2006 / A11:
2008 / A2: 2010 / A12: 2011, EN 300328 v1.8.1,
EN 301 489-1 (2008:V1.8.1) and EN 301 489-17
24 English
v1.3.2 following the provision of
Radio&Telecommunication equipment
directive 1999/5/EC R&TTE, Safety directive
2006/95/EC and EMC directive Automotive
2009/19/CE.
http://www.parrot.com/fr/support/parrotasteroid-smart/asteroidsmart_ce_conformity_declaration.pdf
Registered Trademarks
Parrot and the Parrot logo are registered
trademarks of PARROT SA.
The Bluetooth word mark is are registered
trademarks owned by Bluetooth SIG, Inc. and
any use of such marks by Parrot S.A. is under
license. Bluetooth QDID : B013841, B013839,
[-]
"Made for iPod / iPhone / iPad" means that an
electronic accessory has been designed to
connect specifically to iPod, iPhone or iPad,
respectively, and has been certified by the
developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance with
safety and regulatory standards.
iPad, iPod, iPod Touch and iPhone are
trademarks of Apple Inc, registered in the US
and others countries
iPad is a trademark of Apple Inc.
Wi-Fi is a registered trademark of the Wi-Fi
Alliance.
Gracenote, the Gracenote logo and logotype
and "Powered by Gracenote" are either
registered trademarks or trademarks of
Gracenote Inc. in the United States and/or
other countries.
All other trademarks mentioned in this guide
are protected and are the property of their
respective owners.
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this
device may not cause interference, and (2) this
device must accept any interference, including
interference that may cause undesired
operation of the device.
This equipment complies with FCC’s and IC’s
RF radiation exposure limits set forth for an
uncontrolled environment.. The antenna(s)
used for this transmitter must be installed and
operated to provide a separation distance of at
least 20 cm from all persons and must not be
collocated or operating in conjunction with.
25English
26
Guide
d'utilisation
rapide
Sommaire
Avant de commencer
Installation
Première utilisation
Téléphone
Musique
Internet
Vidéo
En cas de problème
Informations générales
p.27
p.28
p.32
p.34
p.34
p.37
p.38
p.39
p.40
Avant de commencer
A propos de ce guide
Afin de limiter notre consommation de papier
et dans le cadre de notre démarche aussi
responsable et respectueuse que possible de
l’environnement, Parrot privilégie la mise en
ligne des documents utilisateurs plutôt que
leur impression. Ce guide simplifié du Parrot
ASTEROID Smart se limite donc à vous fournir
les principales instructions qui vous
permettront d’utiliser facilement cet appareil.
Vous trouverez plus d’informations sur la
section Support de notre site web
www.parrot.com : notice complète, FAQ,
didacticiels...
Note : iPod®, iPhone® (en mode iPod) et iPad®
seront désignés par le terme "iPod" dans ce
manuel.
Mises à jour
Téléchargez gratuitement la dernière mise à
jour de votre produit sur notre site web
www.parrot.com section Support. Ces mises à
jour vous permettront de bénéficier de
nouvelles fonctionnalités et d’améliorer la
compatibilité de votre produit.
Note : Vous pouvez aussi télécharger les mises à
jour de votre Parrot ASTEROID Smart lorsque
celui-ci est connecté à Internet. La disponibilité
d'une mise à jour vous est indiquée sur la barre
de notification.
Avertissements
Les fonctions requérant une attention
prolongée doivent uniquement être utilisées
lorsque le véhicule est à l’arrêt. Votre sécurité
et celle des autres usagers de la route prime
sur les appels téléphoniques, la musique ou les
applications d'aide à la conduite. Soyez
responsable : conduisez prudemment et prêtez
attention à votre environnement. Parrot dégage
toute responsabilité si vous choisissez
d’ignorer cette mise en garde.
Utilisez le Parrot ASTEROID Smart avec un
niveau de volume raisonnable, de manière à
pouvoir entendre à tout moment les bruits
extérieurs pendant la conduite.
Le Parrot ASTEROID Smart comporte des
aimants de type NdFeB qui peuvent
endommager les objets sensibles aux champs
magnétiques (pacemaker, cartes de crédit,
montres mécaniques...).
Le fil "Parking Brake" du câble ISO du Parrot
27Français
ASTEROID Smart permet de détecter si le
frein à main est enclenché ou non. Il doit être
connecté conformément aux instructions
d’installation décrites dans le présent
document. Toute installation ou connexion
incorrecte peut être dangereuse et illégale
dans de nombreux états / pays. L’écran dans le
champ de vision du conducteur ne doit en
aucun cas diffuser de vidéos lorsque le
véhicule est en circulation. Il en est de même
pour toute application web.
Si vous essayez d’utiliser une application non
dédiée à la navigation ou à l’aide à la conduite
pendant que vous conduisez, un avertissement
s’affichera à l’écran. Pour regarder une vidéo
sur l’écran du Parrot ASTEROID Smart,
assurez-vous que le véhicule est à l’arrêt dans
un endroit sûr et que le frein à main est
enclenché.
Interface commande au volant
Une interface commande au volant vous
permet d'utiliser les commandes aux volants de
votre véhicule pour commander votre produit
Parrot. Avec cette interface, vous pourrez
utiliser le Parrot ASTEROID Smart tout en
gardant les mains sur le volant. Consultez notre
site web www.parrot.com pour plus
d’informations sur la date de disponibilité de
cette interface.
Installation
Note: Nous vous recommandons de faire appel à
un professionnel pour cette installation,
notamment à l'un de notre réseau d'installateurs
agréés.
Instructions de sécurité
Eteignez le moteur avant d’effectuer les
branchements.
N'installez jamais le Parrot ASTEROID Smart à
un emplacement où il risque de blesser le
conducteur ou un passager en cas d'arrêt
brusque.
N'installez jamais le Parrot ASTEROID Smart à
un emplacement où il pourrait gêner la
conduite.
Ne percez jamais une cloison ou le tableau de
bord sans vérifier auparavant ce qui se trouve
derrière. Assurez-vous de ne jamais
endommager un composant électronique ou un
câble.
Si vous utilisez des vis, assurez-vous qu'elle
n'entrent pas en contact avec un câble
d'alimentation électrique.
Le Parrot ASTEROID Smart est uniquement
conçu pour fonctionner sur un véhicule avec
28 Français
une batterie de 12 V. Si votre véhicule (ex :
camion) dispose d'une batterie 24V,
l'utilisation d'un dévolteur est nécessaire.
Assurez-vous que les câbles sont installés à
l’écart des endroits chauds (sorties du
chauffage...), des parties mobiles (levier de
vitesse...) et qu'ils ne risquent pas de
s'enrouler autour de la colonne de direction ou
du levier de vitesse.
Vérifiez le bon fonctionnement des
équipements du véhicule après l'installation du
Parrot ASTEROID Smart.
N'installez pas le Parrot ASTEROID Smart ou
un de ses composants à un endroit où l'un des
airbags du véhicule peut se déployer.
N'installez pas le Parrot ASTEROID Smart à un
endroit humide ou soumis à des températures
élevées.
Laissez derrière le Parrot ASTEROID Smart un
espace suffisant pour permettre la dissipation
de la chaleur.
Avant de commencer
Retirez l’autoradio d’origine de votre véhicule.
Cette opération peut nécessiter des clés
d’extraction.
Vérifiez si la connexion entre les connecteurs
audio, l'alimentation du Parrot ASTEROID
Smart et la connectique de votre véhicule est
possible en comparant les deux connecteurs. Si
cette connexion est impossible, l’utilisation
d’un adaptateur ISO est nécessaire afin
d’adapter le Parrot ASTEROID Smart à la
connectique spécifique de votre véhicule.
Consultez la section Compatibilité véhicules
sur la page support du Parrot ASTEROID Smart
pour vérifier la nécessité d'un câble adaptateur.
Comparez le connecteur de l’antenne du Parrot
ASTEROID Smart et celui de votre véhicule. Si
l’utilisation d’un adaptateur antenne est
nécessaire, contactez un professionnel de
l’automobile pour plus d’informations.
Note : Si votre antenne est amplifiée, vous avez la
possibilité de l'alimenter via le câble ISO fourni
avec votre Parrot ASTEROID Smart.
Installation avec les supports
Dévissez les 4 vis pour retirer le support du
1.
Parrot ASTEROID Smart.
Insérez le support de montage et fixez-le
2.
dans l’habitacle. Pour cela, écartez les
languettes vers l’extérieur en les pliant à 90°
(schéma A p.7).
Installez le Parrot ASTEROID Smart et fixez
3.
les 4 vis (schéma B p.7).
Clipsez le cadre en plastique (schéma C p.8)
4.
Installation avec les vis latérales
Dévissez les 4 vis pour retirer le support du
1.
Parrot ASTEROID Smart.
Retirez les 2 supports latéraux (schéma D
2.
p.8).
Positionnez le Parrot ASTEROID Smart de
3.
manière à ce que les trous de vis soient
alignés avec les trous de vis du véhicule.
Vissez autant de vis que nécessaire selon le
4.
modèle de votre véhicule. Utilisez
uniquement les vis fournies.
Installation du dongle GPS
Fixez le dongle GPS sur une surface plane, dans
une zone sans obstacle à l'intérieur de
l'habitacle.
Les pare-brises athermiques et les vitres avec
antenne incrustée peuvent interférer avec la
réception GPS et réduire la fiabilité des
informations liées aux applications de
navigation.
29Français
L'antenne GPS du dongle se trouve
sur le côté où est écrit "Parrot
ASTEROID GPS" et où se trouve le
logo en forme d'étoile. Ce logo doit
toujours être orienté vers le ciel.
Si votre véhicule dispose d'un pare-brise
athermique, fixez le dongle GPS sur le parebrise au niveau de la zone non athermique. Le
côté sur lequel se trouve le logo en forme
d'étoile doit être collé sur le pare-brise
(schéma F p.9).
Note : La zone non athermique du pare-brise
dépend du modèle de votre véhicule. Elle se
trouve généralement au niveau du rétroviseur.
Si votre véhicule ne dispose pas d'un parebrise athermique, fixez le dongle GPS sur le
tableau de bord. Le côté sur lequel se trouve le
logo en forme d'étoile doit être visible (schéma
E p.9).
Pour assurer une bonne fixation du support :
utilisez l'adhésif double face fourni ;
nettoyez la surface de montage avant de
coller le support ;
après fixation du support, patientez
environ 2 heures sans le manipuler.
30 Français
Connexion du câble de frein à main
Le câble de frein à main permet d'utiliser la
fonction vidéo ou certaines applications du
Parrot ASTEROID Smart lorsque le frein à main
est serré. Si ce câble n'est pas connecté au
câble de signal de frein à main de votre
véhicule, la fonction vidéo ne sera pas
disponible.
Connectez la rallonge du câble de frein à
1.
main fournie sur le câble vert du Parrot
ASTEROID Smart.
Repérez et testez le câble de signal de
2.
frein à main dans votre véhicule. Ce câble
relie votre frein à main au voyant frein à
main sur votre tableau de bord.
Placez la rallonge du câble de frein à main
3.
du Parrot ASTEROID Smart (verte) à un
emplacement sûr et connectez-la au câble
de signal de frein à main de votre véhicule
en utilisant une méthode appropriée.
Avertissement : Une connexion ou une
utilisation incorrecte du câble de frein à main
est dangereuse et illégale dans de nombreux
Etats.
Installation d'une caméra de recul
Si vous utilisez le Parrot ASTEROID Smart avec
une caméra de recul (non fournie), le câble
orange sur le câble ISO du Parrot ASTEROID
Smart permet de détecter si votre véhicule
avance ou recule. Connectez ce câble à celui
dont la tension permet d'allumer vos feux
arrières afin d'afficher le signal vidéo de la
caméra de recul lorsque vous effectuez une
marche arrière.
Connectez également le câble vidéo de la
caméra de recul au connecteurs Video CAM
situés derrière le Parrot ASTEROID Smart.
Installation du microphone
Nous vous recommandons de faire glisser le
câble dans la gouttière derrière le joint de la
portière.
Si le câble passe au dessus des pédales,
assurez-vous qu’il est bien fixé.
Avertissement: Ne faites pas passer le câble du
microphone dans les systèmes de chauffage, de
ventilation, de climatisation ou devant les
airbags latéraux.
Assurez-vous que le microphone est installé le
plus près possible de la tête de l’utilisateur. La
Loading...