Parrot PATPF724301AA Instruction manual

Jumping Race Drone

JETT

TUK TUK

MAX

User Guide

Table Of Contents

Before starting

Piloting

.......................................................................................................................................................4

...........................................................................................................................................................................................................4Charging the battery

.......................................................................................................................................................6

Settings

Road plan

Drone Academy

Updating

.......................................................................................................................................................12

.......................................................................................................................................................15

.......................................................................................................................................................18

.......................................................................................................................................................20

General information

.......................................................................................................................................................21

Before starting

Charging the battery

1. Insert the battery into the appropriate compartment (pictures A and B).

2. Connect the MiniDrone (pictures C and D): To a 2.4 A minimum charger (not provided). The charging time is approximately

25 minutes. To your computer using the USB cable (provided). The charging time is

approximately 1 hour and 30 minutes.

> The LED located next to the On/off button turns red while charging. Once the MiniDrone is fully charged, the LED turns green.

To remove the battery:

1. Carefully lift the plastic part surrounding the battery.

2. Remove the battery using the two grips located at the back of the battery.

4 Before starting

In order to ensure effective maintenance of the battery on the MiniDrone never leave the battery installed in the compartment.

Switching the Parrot Jumping Race Drone on and off

Insert the battery into the battery compartment or press the button to switch the MiniDrone on. Wait until the MiniDrone indicates that it is ready to be used and its LED eyes turn green. Press the button to switch the MiniDrone off. The LED eyes switch off.

Downloading the application

Connect to the App StoreSM or Google Play application.

and download the free FreeFlight3

Connecting a smartphone

1. Carry out a Wi-Fi® search from your smartphone

if you are using an iPhone or an iPad select Settings > Wi-Fi if you are using an AndroidTM smartphone select Settings > Wireless and

networks > Wi-Fi.

2. Select the MiniDrone's network.

3. Wait for your smartphone to connect to the Wi-Fi network of the MiniDrone.

This connection is generally represented by the Wi-Fi logo appearing on the smartphone screen.

4. Start the FreeFlight3 application.

> The connection between your smartphone and the MiniDrone is established automatically. A pop-up "Connected" appears. The MiniDrone performs a turn and emits sounds.

If your smartphone does not connect automatically to the MiniDrone, press , then select the name of your MiniDrone in the list. See the Settings > Wi-Fi section for further information.

5Before starting

Piloting

N°

Description

N°

Description

Last screen

Long jump

Settings

MiniDrone's position

Stopping a pre-programmed acrobatic

Wi-Fi range

Pre-programmed acrobatics

Left joystick

1. Start the FreeFlight3 application.

2. Press FREE RIDE to pilot the MiniDrone. Press Voice transmission to pilot the

MiniDrone in Talkie Walkie mode. For further information, see Talking through

the MiniDrone.

> The piloting screen appears.

At any time you can press < to return to the main menu.

Piloting screen

6 Piloting

Walkie Talkie (Voice transmission mode

only)

Speed needle

Video recording

Right joystick

Photo

Plugged / unplugged phone headset

High jump

Battery level

Wheels position

Before you start slelect the piloting mode for the MiniDrone

by bringing the wheels together you are making the MiniDrone more responsive

by separating the wheels you are improving the MiniDrone stability.

MiniDrone's positions

Press the key to switch to Jumper or Kicker position. Press down for 2 seconds on the key to switch to Auto-balance position.

Jumper position enables you to perform jumps forwards and upwards. The Kicker position enables you to push away objects located in its path. Auto-balance position makes it easier for you to negotiate certain obstacles. In order to avoid excessive wear to the rubber pad, use the Auto-balance position when you are rolling over rough surfaces.

7Piloting

+ 16 hidden pages