Recording the keywords
   Click on the central button - the kit says «Language» and the name of the language  
  currently used by the kit.
  • Turn the scroll wheel until the kit says «Record keywords» and then confirm. 
  • The kit says «Record all keywords».
  • If one or more keywords are already recorded, the kit selects the first keyword that 
    has not yet been recorded.
  • Press the central button or the green button to start recording. Follow the prompts 
   given by the kit.
  • When a keyword is correctly recorded, the kit automatically goes to the next.
  • As soon as all keywords are correctly recorded, the kit enables them automatically.
  • You can exit the menu at any time by pressing the red button and then go back to 
    record or modify the keywords whenever required.
  • If you do not wish to record all the keywords, turn the scroll wheel to select the 
   required word.
Further details on www.parrot.biz.
  Receiving contacts
   To use the Parrot NOMAD’s voice recognition feature, you must send the contacts from 
  your phone to the Parrot NOMAD via Bluetooth (if your phone supports this feature).
  Proceed as follows
  • Go to the «Receive contacts» menu.
  • Press the scroll wheel or the green button: the Parrot NOMAD and the phone discon-
    nect - the Parrot NOMAD is now ready to receive contacts.
  • On your phone, go to the phonebook, select the contact, press Options and send by 
    Bluetooth.
  • Select Parrot NOMAD from the list (enter 1234 as the PIN code if prompted by your 
   phone).
  • Once received, the kit asks you to record the name corresponding to the contact. The 
    voiceprint is assigned to the contact.