Parrot MKI9000 User Manual [el]

PARROT
MKi9000

Quick start guide

Guide d’utilisation rapide

Οδηγός γρήγορης εγκατάστασης

www.parrot.com

Parrot MKi9000

Installation diagrams ........................

English .............................................

Français ...........................................

Ελληνικά ...........................................

. ..........................................

General Information..........................

p.04
p.11
p.15
p.21
p.32
p.33

5

www.parrot.com

• A: 12V ignition (orange)

• B: 12V constant power supply (red)

• C: Ground

• D: Connection to the vehicle’s power supply

• E : Connection to the vehicle’s speakers

1. Rear right speaker (purple / purple-black)

2. Front right speaker (grey / grey-black)

3. Front left speaker (white / white-black)

4. Rear left speaker (green / green-black)

• F : This wiring is not used.

- Car stereo with an ISO connector

- Autoradio avec connecteur ISO

- Ηχοσύστημα με βύσματα ISO

6

www.parrot.com

• A : 12V ignition (orange)

• B : 12V constant power supply (red)

• C : Ground

• D : Connection to the vehicle’s power supply

• E : Line-out 1
1 : Line 1 + : white
2 : Line 1 - : brown

• F : Line-out 2
1 : Line 2 + : red
2 : Line 2 -: black

• G : This wiring is not used

- Car stereo with Line In input

- Autoradio avec entrées Line In

- Ηχοσύστημα με εισόδους Line

7

- Inser ting the remote control batter y

- Inser tion de la pile de la télécommande

- Εισαγωγή της μπαταρίας του τηλεχειριστηρίου

- The remote control only works with a 3V CR2032 battery.

- L’autonomie de la télécommande est assurée par une pile de type 3V CR2032
uniquement.

- Η αυτονομία του τηλεχειριστηρίου πραγματοποιείται αποκλειστικά μέσω
μίας μπαταρίας τύπου 3V CR2032.

- Installing the remote control on the dashboard

- Installation de la télécommande sur le tableau de bord

- Εγκατάσταση του τηλεχειριστηρίου στο ταμπλό του αυτοκινήτου

8

clic

- Do not install the remote
control on the outside of the
steering wheel

- N’installez pas la
télécommande sur le côté
extérieur du volant

- Μην εγκαταστείτε το
τηλεχειριστήριο στο εξωτερικό
τμήμα του τιμονιού

9

This simplified guide of the Parrot MKi9000 gives you the
main instructions to easily use this product. For further
information, consult our website www.parrot.com.

Contents

• Prior to xing the hands-free kit’s different components

inside the car, connect the installation cables, control
keypad and double microphone to the electronic
control unit.

• The cables supplied with the kit feature ISO connectors

and two pairs of line-out jacks. The line-out jacks can be
used if your audio system features this option (use of an
amplier). Several set-ups are therefore possible
depending on the type of car stereo and your vehicle.

• The mute function is used to cut the sound of your car

stereo to enable a phone call. The choice of the mute-in
jack depends on your car stereo’s configuration.

English

English

The availability of some functionality only depends
on your mobile phone.
► Refer to our website www.parrot.com, in the
Compatibility section, for further information.

Installing the Parrot MKi9000

Installing the Parrot MKi9000..............................................

Car stereo with an ISO connector................................

Car stereo with Line-In jacks.......................................

Car stereo without ISO connectors..............................

Installing the kit’s power cable.....................................

Installing the audio connectors....................................

Installing the electronic box.........................................

Installing the remote control........................................

Installing the microphone.............................................

Using the Parrot MKi9000 for the 1st time.........................

Associating the electronic box with the remote

control..........................................................................

Selecting the language ...............................................

Navigating through the menus.....................................

Pairing and connecting a phone to

the Parrot MKi9000......................................................

Using the telephone function..............................................

Commands..................................................................

Receiving a calll...........................................................

Making a call via voice recognition..............................

Using the Music function.....................................................

Selecting a music source.............................................

Commands...................................................................

We would advise our customers to have the Parrot
MKi9000 fitted by a professional.

10

10
11
11
11
11
11
12
12
12

12

12
12
12

12

13
13
13

13
13
13
14

11

On some vehicles, there is no ignition +12V on the
vehicle’s connectors. You must therefore connect
the orange power supply wire to the fuse box or
another ignition power source.

Car stereo with an ISO connector

1. Connect the male connectors of the hands-free kit to the
car stereo.

2. Join the vehicle’s audio and power supply cables to the
female connectors of the Parrot MKi9000.

3. On the installation cable, connect the free yellow wire to

one of the audio system’s corresponding mute-in jacks if
available (mute in 1, mute in 2 or mute in 3).

Car stereo with line-in jacks

• Use this type of connection by wiring a line-out jack

(brown & white wire or red & black wire) to your car
stereo’s line-in jack.

• Using the two pairs of line-out jacks will enable you to

take advantage of the streaming audio function in stereo
over your vehicle’s speakers.

• On the installation cable, connect the free yellow wire to

one of the audio system’s corresponding mute-in jacks if
available (mute in 1, mute in 2 or mute in 3).

Car stereo without ISO connectors

To simplify the wiring procedure, you will need to purchase

an ISO adapter cable. Refer to the range of ISO adapters on

our website: www.parrot.com.

Installing the kit’s power cable

• Refer to your car stereo’s wiring diagram.

• The red wire of the kit’s cable must correspond to the

constant +12V supply, the orange wire to the ignition +12V
and the black wire to ground.

• Check that the orange wire is not connected to the

constant +12V supply, as you could run down the vehicle’s
battery.

• On some vehicles, the red and orange power supply

wires may need to be reversed. This can easily be done
by reversing the two fuse holders on the Parrot MKi9000
installation cable.

Installing the audio connectors

• Connect the music cable to the electronic box and
place the USB / iPod / Jack connectors into the glove
box, the central console or the parcel tray depending on

the configuration of your dashboard.

• To protect the connectors from dust, use the provided

protection cap.

Installing the electronic box

Avoid installing the electronic box near heating or air­conditioning system, on a spot directly exposed to sunlight or

behind metal walls.

Installing the remote control

• Choose the place for the remote control inside your

vehicle. We would advise you to fit it in the centre of the
dashboard.

• If you want to place the remote control on the steering

wheel, make sure it is securely attached, so it does
not move when you are driving. Do not install the
remote control on the outside of the steering wheel and
ensure it does not get in the way when driving.

• If you want to place the remote control on the dashboard,

stick the double-sided tape located on the flat side of the

bracket to x it against the dashboard. You can then insert

the remote onto the bracket. Refer to the diagrams p.8.

Installing the microphone

Parrots microphones are directional and need to be
pointed towards the user to pick up clear speech.
Where possible the microphone should be installed near the
front roof light cluster in the centre of the vehicle with a clear
path to the user.

Associating the control unit with the remote control

If the remote control doesn’t seem to be associated to the

electronic box while using the Parrot MKi9000 for the rst

time, press several times the red button while holding down
the Play and green buttons until the «Pairing remote control»
message is said. This has to be done during a 30 seconds
period once the ignition is turned on.

Selecting the language

While using the Parrot MKi9000 for the first time, use the jog •

wheel to browse through the available languages and press
the jog wheel to confirm your selection.

In case of a problem during language selection, hold down •

the red and green buttons for 2 seconds.

Navigating through the menus

• Press the central jog wheel to access the menus.

> The kit says the name of the current menu.

• Browse through the menus by turning the wheel and

confirm with the green button or by pressing the wheel.

• Press the red button or wait a few seconds to exit
the menu.

Using the PARROT MKi9000 for the 1st time

12