Parrot MK6000 User Manual

Upgrade procedure for the Parrot

MK6000

1 . How to upgrade the Parrot MK6000?

Two methods are available to upgrade your MK6000: One by serial cable (§1.1), one by Bluetooth (§1.2 and 1.3)

1.1. By Serial Cable:

You will need a computer running MS Windows, a serial cable and the Parrot Flash Update Wizard.
First:

- Download and install the Parrot Flash Update Wizard program. (available on our web site :

www.parrot.com then choose SUPPORT and DOWNLOAD)

- Connect your computer to your carkit via the serial cable.

- Make sure that the MK6000 is turned off and start the Parrot Flash Update Wizard.

- Click on Next,

- Select the Parrot MK6000 in the list and click on Next :

- Then click on Download Latest version.

- Click on OK when you see this warning.

- First, you have to select your language.

- After selecting your language, the check box « □ With Text-To-Speech » may be available. (if not, just skip the
following step : click on Download Now)

- At this point you can choose either to :

• Check the box : «  With Text-To-Speech » :

This means you want to activate the reading contacts

feature via the synthetic voice of the carkit.

The contacts that will be “read” are:

- The ones automatically synchronized by your phone (if
your phone support this feature)

- The ones sent manually (one by one or all together
depending on your phone capability)

• Or if you leave the box unchecked :

The reading contact feature will not be activated and no
automatic synchronisation will be possible.

This configuration can be helpful if you are facing some
synchronisation issues or if you do not want to synchronise
all your phonebook with the carkit (only in case your phone
support automatic synchronisation).

In case you are using this configuration, you can still send
contacts one by one and record a voice print on the carkit.
(Check your user guide for more details).

- Click then on "Download Now".

- Wait until the end of the download (The downloaded files will be stored in C:\Program Files\Parrot Flash Update

Wizard\Internet Files).

- Click on OK.

- Click on Next

- Select Serial connection and then click on Next

- Select the COM port on which you have connected the serial cable and then click Next.

- Wait until the end of the upgrade process.

- Click on Finish.

- You can now disconnect your carkit from the computer.

- Your Parrot MK6000 is now up-to-date.

1.2. Upgrade via Bluetooth

For this procedure you will need a Bluetooth dongle, a computer running Windows and the Parrot Flash
Update Wizard program.

Follow the procedure described bellow:

- Make sure that your Bluetooth dongle is correctly installed on your computer (refer to its user guide
for additional information).

- Download and install the Parrot FlashUpdate Wizard program, then run it.

- Click on Next,