PARROT FC6000TS, FC6000TN User Manual

Download

Confidential Information

OEM

2013-

319

FC6000

T PRODUCT

PRESENTATION

Confidential Information

Ref: OEM-2013-319

Parrot FC6000T

All in one multimedia module Dual mode Bluetooth 3.0 and 4.0 (nb: Bluetooth Low Energy 4.0: future implementation)

Application:

• Telephony

• Internet access (through DUN or

PAN)

• Audio Streaming

• Voice Recognition / Text To

Speech

The FC6000T integrates the latest version of the Parrot Bluetooth stack (Blues). Blues gives to the customer a very high level of compatibility with most of the phones available on the market and provide phonebook and list synchronization. FC6000T offers the possibility to use a Speaker Independent Voice Recognition (SIVR) and a Text To Speech algorithm (TTS).

FEATURES

Bluetooth 3.0 qualified module Bluetooth 4.0: future implementation Wide band speech

3.3V & 1.8V power supply UART, I²S, I2C, GPIO Digital audio input and output Analog microphone input Analog output Up to 10 paired phones Small size module (32 x 36 mm) Automotive qualified

Description:

Parrot FC6000T is a fully integrated Bluetooth phone connectivity solution powered by a Parrot P6i with 416 MIPS with an internal CODEC and NR/AEC signal processing. It integrates a large variety of interfaces for an easy integration in most of the applications.

Parrot

P6i

Flash

DDRAM

2*UART

I2S in/out

I2C for Ipod authentication

Analog output

Analog microphone input

PRODUCT PRESENTATION FC6000T ed1 2/20

Confidential Information

Table of contents

Ref: OEM-2013-319

1. PRODUCT OVERVIEW ............................................................................................................................... 4

2. RATINGS-SPECIFICATIONS-CHARACTERIZATION....................................................................................... 7

2.1

TORAGE PERIOD AND CONDITIONS

2.2

BSOLUTE MAXIMUM RATINGS

2.3

OWER CONSUMPTION

2.4

LUETOOTH MAIN CHARACTERISTICS

3. MECHANICAL SPECIFICATIONS ................................................................................................................. 9

3.1

ORIZONTAL MODULE

3.2

ERTICAL MODULE

3.3

ODULE CONNECTORS

3.3.1 Connector on mother board ............................................................................................................ 12

3.3.2 Horizontal modules connector ........................................................................................................ 12

3.3.3 Vertical modules connector ............................................................................................................. 13

3.3.4 Antenna connector .......................................................................................................................... 13

3.4

OTHERBOARD MECHANICAL INTEGRATION

Mechanical integration – Horizontal version: .............................................................................................. 14

Mechanical integration – Vertical version: ................................................................................................... 15

4. MARKING ............................................................................................................................................... 16

4.1

ABEL

FC6000TN / FC6000TS ................................................................................................................. 16

5. CAUTION FOR USE ................................................................................................................................. 16

............................................................................................................................... 7

............................................................................................................................... 10

.................................................................................................................................... 11

.............................................................................................................................. 12

............................................................................................................... 7

..................................................................................................................... 7

.............................................................................................................. 8

................................................................................................. 14

5.1

ESD C

OMPLIANCE

5.2

AFETY

................................................................................................................................................... 16

5.3

SSEMBLY

5.4

ROP

..................................................................................................................................................... 16

6. APPROVAL AND CERTIFICATION ............................................................................................................ 17

6.1

FC6000TS ............................................................................................................................................. 17

6.1.1 Normative certificates ..................................................................................................................... 17

6.1.2 CE declaration ................................................................................................................................. 17

6.1.3 FCC and IC requirements for module application ............................................................................ 18

6.2

FC6000TN ............................................................................................................................................ 19

6.2.1 Normative certificates ..................................................................................................................... 19

6.2.2 CE declaration ................................................................................................................................. 19

6.2.3 FCC and IC requirements for module application ............................................................................ 19

.................................................................................................................................... 16

............................................................................................................................................... 16

PRODUCT PRESENTATION FC6000T ed1 3/20

Confidential Information

Ref: OEM-2013-319

1. PRODUCT OVERVIEW

The FC6000T is a feature-rich Bluetooth platform dedicated for the integration of Bluetooth in car audios, car telematics systems or any systems requiring a complete embedded multimedia solution.

FC6000T features are:

• Bluetooth connectivity

 Bluetooth Power Class 2 Radio  Embedded Bluetooth .1, v1.2, v2.0+EDR, v2.1+EDR & v3.0 compliant  Bluetooth v4.0 : future implementation  Embedded profiles  Compatible with most of Bluetooth phones  Pairing and connection with all Bluetooth Devices: Phones, Smartphones,

PDA …

 Multiple users support: Up to 10 paired phones depending on Flash memory

size.

 Multiple connections (up to 3 device connected at the same time)  Multiple profiles

• Phone

 Pick-up, Hang-up, Redial  Automatic answer (from host via pickup command)  Send DTMF during calls  Private Mode  3-way calling  Double HFP

PRODUCT PRESENTATION FC6000T ed1 4/20

Confidential Information

• Phone Book

 Automatic Phone book synchronization over Bluetooth (up to 5000 contacts;

depending on the Flash memory size)

 Call history (dialed number, received calls, missed calls)  All Synchronization Methods  Full Unicode for compatibility with numerous characters sets (European,

Russian, Chinese, Japanese…)

• Digital Signal Processing

 Microphone(s): the module can manage two configurations:

 Single microphone  Two microphones with AMS (Automatic Microphone Selection): 1 for

the driver and 1 for the front seat passenger. The best microphone is automatically selected during the call.

 Noise Reduction (NR)

 Maximal NR is 25dB.  Typical NR is 15dB.  No musical noise  No fluctuation of the residual noise level  Automatic adaptation of the Noise Reduction to the Signal-to-noise

ratio (SNR) to keep the best voice quality in idle and remove more noise in noisy conditions.

 Acoustic Echo Cancellation (AEC)

 The level of echo attenuation, called ERLE is 45dB (measured

according to the VDA process).

 Comfort Noise feature so that the background noise is adjusted after

AEC algorithm, in order to keep it constant for enhanced communication experience.

 Possibility to accept up to 100ms of delay in the speaker path for digital

amplifiers.

 Full duplex

 Automatic Level Control (ALC)

 Different phones can have different Speaker volumes (up to 20dB of

difference). It adapts the signal level received from the phone to the target level, quickly and precisely.

 Equalizer

 9 bands equalizer for microphones and speaker paths.

 Tuning

 Car independent tuning if the microphone position and specifications

are the same.

 Possibility to tune all parameters of the audio algorithms according to

Customer preferences.

 Wideband

 All algorithms work @ 16 kHz.

• Audio Streaming

 Embedded SBC decoder  Embedded MP3 decoder from Thomson Licensing (optional)  Stereo audio output

• Speaker Independent Voice Recognition (Optional)

• Text To Speech (Optional)

Ref: OEM-2013-319

PRODUCT PRESENTATION FC6000T ed1 5/20

Confidential Information

• Miscellaneous

 Provide Phone Battery Level and Network Level, Carrier Name (depends on

phones)

• Software Update

 Full standard Software available (free upgrade from Parrot homepage)  Software update available through Bluetooth or UART  Very large compatibility with Phones, Smart phones, PDAs, Music players

• External Bluetooth Antenna connection diagnostic

• HSTI

In order to facilitate communication between the FC6000T and your product host microprocessor, Parrot has created and provides the HSTI Library. The HSTI library is the software application programming interface (API) to integrate the FC6000T command and control within the software of the host processor. HSTI is backward compatible with former AT commands. Few adaptations may be considered due to the improvements in the new modules generation. Application notes are available.

Ref: OEM-2013-319

PRODUCT PRESENTATION FC6000T ed1 6/20

Run/Standby mode

(waiting for

Run/Standby mode

(waiting for

Confidential Information

Ref: OEM-2013-319

2. RATINGS-SPECIFICATIONS-CHARACTERIZATION

NB: ALL ELECTRICAL SPECIFICATIONS COULD BE UPDATED WITHOUT NOTIFICATION

2.1 Storage Period and Conditions

Our Design Validation test plan usually allows our customers to determine their own storage conditions according to their experiences.

Therefore, the following chart is given for information purpose only.

Storage condition In original carton box Storage temperature range -20°C / +50°C Humidity 40% - 80% Duration 3 months

Un-operating temperature range (*) -40°C / +125°C

(*) This Temperature range relates to Automotive Customers requirement regarding the following phase of the product life cycle: Vehicle parked outdoor in very hot or cold countries, before shipment to car dealers.

2.2 Absolute Maximum ratings

Operating temperature range ........................................................................... -40°C to +85°C

Storage temperature range ............................................................................ -40°C to +125°C

Voltage on 3V3 power supply with respect to Vss ................................................ 3,1V to 3,6V

Voltage on 1V8 power supply with respect to Vss ............................................ 1,73V to 1,89V

The FC6000T module must be powered by a Limited Power Source (in the meaning of 2.5 of EN60950-1 safety standard).

2.3 Power Consumption

ON 3V3 Power Supply Min Typ Max Unit Comment

Stop mode - - 6 mA Reset pin low

commands) - - 40 mA Hands Free and Audio streaming mode - - 120 mA Peak current at startup - - 200 mA

ON 1V8 Power Supply Min Typ Max Unit Comment

Stop mode - - 0 mA Reset pin low

commands) - - 120 mA Hands Free and Audio streaming mode - - 230 mA Peak current at startup - - 800 mA

PRODUCT PRESENTATION FC6000T ed1 7/20

FHSS (Fr

equenc

y Hopping Spread Spectrum)

system

•

rmanent antenna connector (FC60

00T

Confidential Information

Ref: OEM-2013-319

2.4 Bluetooth 3.0 main characteristics

Features Description

Frequency Band 2.4000 – 2.4835 GHz (2.4 GHz ISM Band) Number of channels 79 channels (f=2402+k MHz, k=0,…,78)

Modulation

Modulations GFSK, π/4 DQPSK and 8DPSK Supported rates 1, 2, 3 Mbps Output Power 4dBm max

PCB integrated antenna for FC6000T /

Antenna type

internal antenna version

• External antenna (antenna connector) for FC6000T, external antenna version

Antenna gain Max 2,18 dBi

version ‘external antenna’ )

U.FL type coaxial subminiature connector

2.5 Bluetooth 4.0 main characteristics

NB: This feature will be implemented as a second step.

PRODUCT PRESENTATION FC6000T ed1 8/20

Bluetooth antenna

Confidential Information

Ref: OEM-2013-319

3. MECHANICAL SPECIFICATIONS

The following chart describes the availability of the various versions of the FC6000T: For all versions, the legs of the shielding have to be soldered onto the host PCB in order to assure mechanical assembly and EMC performance.

Module version Mounting

FC6000T

horizontal

vertical Yes Yes

Internal external

Yes Yes

PRODUCT PRESENTATION FC6000T ed1 9/20

Confidential Information

3.1 Horizontal module

Ref: OEM-2013-319

PRODUCT PRESENTATION FC6000T ed1 10/20

Confidential Information

3.2 Vertical module

Ref: OEM-2013-319

PRODUCT PRESENTATION FC6000T ed1 11/20

Confidential Information

3.3 Module connectors

3.3.1 Connector on mother board

Ref: OEM-2013-319

JST reference

Mechanical overview: Recommended PCB footprint:

24R-JMCS-G-(B)-TF

3.3.2 Horizontal modules connector

JST reference

Mechanical overview: Recommended PCB footprint:

24P3.5-JMCS-G-TF (Top entry type)

PRODUCT PRESENTATION FC6000T ed1 12/20

Confidential Information

3.3.3 Vertical modules connector

Ref: OEM-2013-319

JST reference

Mechanical overview: Recommended PCB footprint:

24PS-JMCS-G-1B-TF (Side entry type)

3.3.4 Antenna connector

Only on external antenna products: JST reference

This connector must be connected to a radio antenna.

AYU1-1P-02676-120

PRODUCT PRESENTATION FC6000T ed1 13/20

Confidential Information

Only on internal antenna products: I-PEX reference:

This switch is only used in production for testing purpose.

20549-001E

Ref: OEM-2013-319

3.4 Motherboard Mechanical Integration

Mechanical constraints for the integration on the mother board are detailed below.

Mechanical integration – Horizontal version:

PRODUCT PRESENTATION FC6000T ed1 14/20

Confidential Information

Mechanical integration – Vertical version:

Ref: OEM-2013-319

PRODUCT PRESENTATION FC6000T ed1 15/20

Confidential Information

Ref: OEM-2013-319

4. MARKING

4.1 Label FC6000TN / FC6000TS

The label is done here for the FC6000TN. For the FC6000TS, all designations ‘FC6000TN’ are replaced by ‘FC6000TS’.

NB: The TELEC / Japan certification reference is not the relevant one. It is just an example for placement on the label. It will be printed and updated when final number is available. Until that time, neither the logo nor the number will be printed

5. Caution for use

5.1 ESD Compliance

Operator must use ESD protection gloves for Module Manipulation. In case of electrical discharge, Module must be scrapped.

5.2 Safety

Mechanical shield is made of metal and have several draft angle which can cause Human injuries. Operator must be trained on how to manipulate it.

5.3 Assembly

Key mechanical dimensions are tested before shipment.

In case of manual handling or operation, to avoid any issue with mechanical distance between legs and ensure a good insertion in the host side, packaging has been designed to ensure that operator will pick up the part by the most adequate area of the module. Operator should be trained and alerted about this specific behavior.

5.4 Drop

In case the part drop to the floor, Parrot doesn’t warrant the part. Part has to be scrapped. Same process applies in our manufacturing site.

PRODUCT PRESENTATION FC6000T ed1 16/20

Confidential Information

6. Approval and certification

6.1 FC6000TS

6.1.1 Normative certificates

FC6000TS module certifications / identifications numbers:

CE : CE0700 FCC ID : RKXFC6000TS IC : 5119A-FC6000TS BT : QD-ID B020794

6.1.2 CE declaration

Ref: OEM-2013-319

PRODUCT PRESENTATION FC6000T ed1 17/20

Confidential Information

Ref: OEM-2013-319

6.1.3 FCC and IC requirements for module application

FCC ID: RKXFC6000TS IC: 5119A-FC6000TS

In accordance with FCC Part 15, the FC6000TS is listed as a Modular Transmitter device.

USA – User information

This intends to inform how to specify the FCC ID of our module “FC6000TS” on the product. Based on the Public Notice from FCC, the host device should have a label which indicates that it contains our module. The label should use wording such as: “Contains FCC ID: RKXFC6000TS” Any similar wording that expresses the same meaning may be used. The label of the host device should also include the below FCC Statement. When it is not possible, this information should be included in the User Manual of the host device.

“This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.”

Canada – User information

This intends to inform how to specify contain IC of our module “FC6000TS” on the product. According to Canadian standards “RSS 210” and “RSS Gen”, the host device should have a label which indicates that it contains our module. The label should use wording such as: “Contains IC: 5119A-FC6000TS Any similar wording that expresses the same meaning may be used. The label of the host device should also include the below IC Statement. When it is not possible, this information should be included in the User Manual of the host device.

“Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.”

« Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. »

PRODUCT PRESENTATION FC6000T ed1 18/20

Confidential Information

Ref: OEM-2013-319

6.2 FC6000TN

6.2.1 Normative certificates

FC6000TN module certifications / identifications numbers:

CE : CE0700 FCC ID : RKXFC6000TN IC : 5119A-FC6000TN BT : QD-ID B020794

6.2.2 CE declaration

Identical to CE declaration shown on 6.1.2.

6.2.3 FCC and IC requirements for module application

FCC ID: RKXFC6000TN IC: 5119A-FC6000TN

In accordance with FCC Part 15, the FC6000TN is listed as a Modular Transmitter device.

USA – User information

This intends to inform how to specify the FCC ID of our module “FC6000TN” on the product. Based on the Public Notice from FCC, the host device should have a label which indicates that it contains our module. The label should use wording such as: “Contains FCC ID: RKXFC6000TN” Any similar wording that expresses the same meaning may be used. The label of the host device should also include the below FCC Statement. When it is not possible, this information should be included in the User Manual of the host device.

Canada – User information

This intends to inform how to specify contains IC of our module “FC6000TN” on the product. According to Canadian standards “RSS 210” and “RSS Gen”, the host device should have a label which indicates that it contains our module. The label should use wording such as: “Contains IC: 5119AFC6000TN”. Any similar wording that expresses the same meaning may be used. The label of the host device should also include the below IC Statement. When it is not possible, this information should be included in the User Manual of the host device.

PRODUCT PRESENTATION FC6000T ed1 19/20

Confidential Information

Ref: OEM-2013-319

PRODUCT PRESENTATION FC6000T ed1 20/20

PARROT FC6000TS, FC6000TN User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual