Page 1
CK5050+T PRODUCT PRESENTATION
CK5050+T PRODUCT
Ref:
OEM-2013-401
Confidential Information
PRESENTATION
/ V1.2 / 24-09-2013
1/19
Page 2
CK5050+T PRODUCT PRESENTATION
CK5050+T
Internet access (through DUN)
Speaker Independent Voice Recognition
version of the Parrot Bluetooth stack
to the customer a
very high level of compatibility with most of
the phones available on the market and
phonebook and list
can also integrate a
rsion of the Parrot USB management
library (Disco). Disco manages the USB
devices, build database with metadata,
ssed audio files by
s them. Disco
chip through the I²C
CK5050+T
possibility to use a Speaker Independent
Voice Recognition (SIVR) and a Text To
Ref:
qualified module
Piconet and scatternet support
supply
OTG
Digital audio input and output
paired phones
Multiple Profiles (as example A2DP, HFP)
Small size module (34,5 x 41,35 mm)
is a low cost solution for
connectivity. It integrates a large variety of
for an easy integration in most
OEM-2013-401
Confidential Information
Parrot
All in one multimedia module.
Bluetooth 3.0
Applications:
Telephony
Audio streaming
USB and IPod management
and TTS
The CK5050+T integrates
the latest
Features:
Bluetooth 3.0
Standard single 3V4
UART, I²C
2*USB 2.0 full speed
IPod chip management
Analog audio input
Support up to 10
Automotive qualified
Class 2
Parrot CK5050+T
interfaces
of the applications.
(Blues). Blues brings
provides
synchronization.
The CK5050+T
ve
browses the compre
artist/genre/title and play
also supports the iPod
interface. Moreover,
Speech algorithm (TTS).
Description :
offers the
/ V1.2 / 24-09-2013
2/19
Page 3
CK5050+T PRODUCT PRESENTATION
................................
................................
................................
SPECIFICATIONS
................................
................................
................................
................................
(T°=
IONS
................................
................................
CK5050+T: External BT Antenna Connector
CK5050+T : Internal Antenna Connector
ONNECTORS
CK5050+T with Male Connector
CK5050+T with Female Connector
MECHANICAL DESIGN
CK5050+T with 3mm shield
TIONS
ORMATIVE CERTIFICATE
REQUIREMENTS FOR MOD
................................
Ref:
................................
................................
................................
................................
................................
................................
................................
................................
................................
IONS
................................
................................
................................
................................
................................
................................
................................
................................
..............................
Erreur
................................
................................
................................
................................
OEM-2013-401
Confidential Information
Table of contents
1 PRODUCT OVERVIEW
1.1 C
1.2 CK5050+T F
2 ELECTRICAL
2.1 P
2.2 M
2.3 P
2.4 E
3 MECHANICAL DESIGN
3.1 CK5050+T A
3.2 CK5050+T C
3.3 CK5050+T
4 APPROVAL / CERTIFICA
4.1 N
4.2 FCC
4.3 CE DECLARATION
ONFIGURATIONS
INOUT
2.1.1
40 pins diagram
2.1.2
Pinout table
AXIMUM RATINGS
OWER CONSUMPTION
LECTRICAL SPECIFICAT
3.1.1
3.1.2
3.2.1
3.2.3
3.3.1
AND IC
EATURES
NTENNA
................................
................................
................................................................
................................................................
-40°C
TO
................................................................
................................................................
................................................................
...................................................
................................................................
................................................................
................................
................................
................................
................................
+85°C) ................................
................................
................................
................................
................................
................................
................................
ULE APPLICATION
................................
.................. 4
...................... 4
............... 5
... 7
..... 7
............... 7
...................... 8
..................... 9
............ 9
...... 9
.................. 9
.............. 10
10
...... 11
........ 12
................... 12
............... 13
14
! Signet non défini.
. 16
......... 16
............................ 17
............... 19
/ V1.2 / 24-09-2013
3/19
Page 4
CK5050+T PRODUCT PRESENTATION
Product overview
is a feature
multimedia applications in car
complete embedded multimedia system solutio
management. Voice recognition is available on
Multiple choices are available for customer choice depending on integration and
Ref:
platform dedicated for the integration of
, car telematic systems or any systems requiring a
integrates USB and iP
OEM-2013-401
Confidential Information
1
The CK5050+T
1.1 Configurations
requirements.
Antenna :
o Internal
o External
Connector
o Male
o Female
Sdram
o 64Mb
-rich connectivity
radio
n. CK5050+T
CK5050+T.
od
o 256Mb
Flash
o 1Gb
o 2Gb
o 4Gb
Shield type
o 3mm high
o 6mm high
o 10mm high
o Delphi type
o Pioneer type
/ V1.2 / 24-09-2013
4/19
Page 5
CK5050+T PRODUCT PRESENTATION
eatur
es
Bluetooth connectivity
Bluetooth Power Class 2 Radio
Embedded Bluetooth v1.1, v1.2
Embedded profiles
Compatible with most Bluetooth phones
Pairing and connection with all Bluetooth
Multiple user support: Up to
Multiple connection (up to 3 device connected at the same time)
Multiple profile
different devices)
CK5050+T
Compliant with USB devices supporting Mass Storage Class
Compliant with USB hub
Able to build a musical database from a Mass Storage Device conform to
VFAT specifications (including FAT 12/16/32)
Using a dedicated library called DISCO, the feature supported by Parrot is to
be able to retrieve the list of files and the metadata contained in the different
-
Automatic answer (from host via
during calls
Automatic Phone book synchronization over Bluetooth (up to
Call history (dialed number, received calls, missed calls)
All Synchronization Methods
Full Unicode for compatibility with
Russian, Chinese, Japanese…)
Ref:
es
and v
ices: Phones, Smartphones,
(for example A2DP and HFP at the same time with same or
Full speed transceivers
numerous characters sets (European,
1.2 CK5050+T F
•
-
-
-
-
-
PDA
-
-
-
• USB connectivity
- Parrot
-
-
-
-
Confidential Information
, v2.0+EDR, v2.1+EDR
10 paired phones
embeds USB 2.0 OTG
OEM-2013-401
3.0 compliant
Dev
• Phone
- Pick-up, Hang
-
- Send DTMF
- Private Mode
- 3-way calling
• Phone Book
-
-
-
-
files.
up, Redial
pickup command)
5000 contacts)
/ V1.2 / 24-09-2013
5/19
Page 6
CK5050+T PRODUCT PRESENTATION
Digital Signal Processing and Acoustics
Noise Reduction (NR)
Maximal NR is 25dB.
Typical NR is 15dB.
No musical noise
No fluctuation of the residual noise level
Automatic adaptation of th
quality in idle and remove more noise in noisy conditions.
Tuning does not depend on car.
(Automatic Microphone Selection)
Two microphones are used: 1 for the driver and 1 for the co
best microphone
Echo Cancellation
(measured according to the VDA process).
Comfort Noise
during echo part.
Possibility to
digital amplifiers.
Tuning does not depend on car.
Full duplex
Automatic Level Control (ALC)
Different phones can have different Speaker volumes (up to 20dB of
difference!). It adapts the signal level re
certain level, quickly and precisely.
9 bands equalizer for microphones and speaker paths.
Tuning of the audio algorithms depends on the microphone position
and sensitivity but not on the car.
Speaker dependant v
Speaker independent voice recognition (Nuance licensing)
Embedded SBC decoder
Embedded AAC
Embedded MP3 decoder from Thomson Licensing (optional)
Stereo audio output
Provide Phone Battery Level and Network Level, Carrier Name (depends on
Full standard Software available (free upgrade from Parrot homepage)
Software update available through Bluetooth,
compatibility with Phones, Smartphones, PDAs, Music players
External Bluetooth Antenna diagnostic
Ref:
e NR to the SNR to keep the best voice
is automatically selected during the call.
The level of echo attenuation, called ERLE is 45dB
so that the background noise is not reduced
accept up to 100ms of delay in the speaker path for
ceived fro
oice recognition (trained names and keyword)
UART or DUN
•
-
- AMS
-
-
- Equalizer
- Tuning
-
-
• Audio Streaming
-
-
-
-
• Miscellaneous
phones)
• Software Update
-
-
- Very large
•
Confidential Information
:
feature
decoder (optional)
OEM-2013-401
-driver. The
m the phone to a
USB,
/ V1.2 / 24-09-2013
6/19
Page 7
CK5050+T PRODUCT PRESENTATION
Electrical specifications
Ref:
OEM-2013-401
Confidential Information
2
2.1 Pinout
2.1.1 40 pins diagram
Pin 1
/ V1.2 / 24-09-2013
7/19
Page 8
CK5050+T PRODUCT PRESENTATION
1
2
4
5
6
7
8
9
10
12
13
14
15
17
18
19
20
21
22
23
24
25
26
27
28
29
31
32
33
34
35
36
37
38
39
40
Ref:
INPUT
COMMENT
I
I
: Analog audio inputs
I
I
I
O
I
I
I
I
I
USB0 ID pin of mini AB receptacle (OTG)
I
USB1 ID pin of mini AB receptacle (OTG)
O
Connected to
IPOD_Authentication_Coprocessor
O/I
O/I
O/I
O/I
I
I
I
I
I
I
I
O
I
Host AT commands and Flash Update
O
O/I
I
I
O/I
I
O/I
O
O/I
O
data out (secondary)
Connected to
2.1.2 Pinout table
OEM-2013-401
Confidential Information
PIN FUNCTION
RIN
LIN
3
MIC1N
MIC2N
MIC1P
MIC2P
MIC_PWR
VSS
BOOTS
NRESET
11
USB0_VBUS
USB1_VBUS
USB0_ID
USB1_ID
USB0_DRV_VBUS
USB1_DRV_VBUS /
16
IPOD_READY
USB0_DUSB1_DUSB0_D+
USB1_D+
VSS
VSS
VCC
VCC
VSS
VSS
U1_IN
U1_OUT
U0_IN
30
U0_OUT
I2C_CLK
I2C_DA
VSS
VSS
I2S_CLK
I2S_IN
I2S_MCLK
I2S_OUT1
I2S_SYNC
I2S_OUT2
/ OUTPUT
I
I
O/I
O
Line in : right input
Line in : left input
Microphones
Microphone power supply
Ground
To update the soft
RESET trigger Input
USB0 Vbus 5V
USB1 Vbus 5V
Drive VBUS (OTG) USB0
Drive VBUS (OTG) USB1 /
USB0 interface D- signal
USB1 interface D- signal
USB0 interface D+ signal
USB1 interface D+ signal
Ground
Ground
POWER
POWER
Ground
Ground
16C550 Compatible type
(for Debug interface)
16C550 Compatible type
(for
interface)
I2C clock
I2C data
Ground
Ground
I2S serial clock
I2S serial data in 1
I2S Master clock
I2S serial data out
I2S synchronization
I2S serial
/ V1.2 / 24-09-2013
8/19
Page 9
CK5050+T PRODUCT PRESENTATION
aximum
................................
Voltage on Vcc with respect to Vss
The CK5050+T module must be powered by a Limited Power Source (in the
ower consumption
................................
................................
Hands free and Audio streaming
µ
Electrical specifications
noted
Parameter
Bluetooth 3.0 main characteristics
Permanent antenna connector (FC6000T,
Ref:
...........
............
................................
.....................
................................
................................
.................
Conditions
Min.
Typ.
3.4
2.4835 GHz (2.4 GHz ISM Band)
(f=2402+k MHz, k=0,…,78)
y Hopping Spread Spectrum)
Modulations GFSK, π/4 DQPSK and 8DPSK
•
PCB integrated antenna for CK5050+
internal antenna version
External antenna (antenna connector)
, external antenna
U.FL type coaxial subminiature connector
Max.
Unit
2.2 Absolute m
Operating temperature range
Storage temperature range
EN60950-1 safety standard).
Confidential Information
ratings
................................................................
................................
................................
OEM-2013-401
-40°C to +85°C
-40°C to +125°C
..... -0.3V to 3.8V
meaning of 2.5 of
2.3 Maximum p
Stop mode
Standby mode
Peak current at startup (950
2.4
Conditions unless otherwise-
Normal power supply
2.5
Features
Frequency Band
Number of channels
Modulation
Supported rates
Output Power
Antenna type
Antenna gain
s
................................................................
................................
mode ................................
s) ................................................................
: Tamb.=25°C
/ 3.2
Description
2.4000 –
79 channels
FHSS (Frequenc
system
1, 2, 3 Mbps
4dBm max
/
•
for CK5050+T
version
Max 2,18 dBi
<20µA
............ <200mA
...... <300mA
<380mA
3.6 Vdc
T
version ‘external antenna’ )
/ V1.2 / 24-09-2013
9/19
Page 10
CK5050+T PRODUCT PRESENTATION
Mechanical Design
describes the availability of the various versions of the FC6000T: For all
versions, the legs of the shielding have to be soldered onto the host PCB in order to assure
mechanical assembly and EMC performance
Module version
Module to Host Main Connector:
Antenna
External
BT antenna is connected to the module through an ultra small coaxial connector:
Ref:
Bluetooth antenna
external
OEM-2013-401
Confidential Information
3
The following chart
CK5050+T
40 PINs connector
0.5mm pitch, double row
3.1 CK5050+T
3.1.1 CK5050+T,
AYU1-1P-02676-120.
Mounting
horizontal
connectors
Antenna variant : RF connector
Internal
Yes Yes
JST reference
/ V1.2 / 24-09-2013
10/19
Page 11
CK5050+T PRODUCT PRESENTATION
Internal Antenna
Only on internal antenna products: I
only used in production for testing purpose.
Ref:
OEM-2013-401
Confidential Information
3.1.2 CK5050+T,
This switch is
variant: RF connector
-PEX reference:
20549-001E
/ V1.2 / 24-09-2013
11/19
Page 12
CK5050+T PRODUCT PRESENTATION
Connectors
with Male Connector
JMCS
JMCS
JMCS
Ref:
OEM-2013-401
Confidential Information
3.2 CK5050+T Main
3.2.1 CK5050+T
CK5050+T module :
JST: 40R-JMCS-G-B-TF
HOST:
JST: 3mm shield: 40P3.0JST: 6mm shield: 40P6.0JST: 10mm shield: 40P10.0-
-G-B-TF
-G-B-TF
-G-B-TF
/ V1.2 / 24-09-2013
12/19
Page 13
CK5050+T PRODUCT PRESENTATION
with Female Connector
Ref:
3.2.3 CK5050+T
CK5050+T:
JST: 40P9.0-JMCS-G-B-TF
HOST:
JST: 40RF-JMCS-G-1-TF
OEM-2013-401
Confidential Information
/ V1.2 / 24-09-2013
13/19
Page 14
CK5050+T PRODUCT PRESENTATION
mechanical design
CK5050+T / Internal antenna variant
50+T / External antenna variant / Top view:
Ref:
OEM-2013-401
Confidential Information
3.3 CK5050+T
CK50
/ Top view:
/ V1.2 / 24-09-2013
14/19
Page 15
CK5050+T PRODUCT PRESENTATION
Label: example for CK5050+T (external antenna version):
For Internal antenna variant, only Parrot references (PI… and S/N PF…), and Software
Ref:
CK5050+T / Side view :
OEM-2013-401
Confidential Information
4 Marking
release are changing.
/ V1.2 / 24-09-2013
15/19
Page 16
CK5050+T PRODUCT PRESENTATION
Cautions for product use
D protection gloves for Module m
Mechanical shield is made of metal and have sever
trained on how to manipulate it.
Key mechanical dimensions are tested before shipment.
In case of manual handling or operation, to avoid any issue with mechanical distance between legs
and ensure a good insertion in the host side, packaging has b
pick up the part by the most adequate area of the module. Operator should be trained and alerted
In case the part drop to the floor, Parrot doesn’t warrant the part. Part has to b
process applies in our manufacturing site.
ertifications
Normative certificate
CK5050+T module certifications / identifications numbers:
BT SIG Qualified Design Listing (
Ref:
case of electrical discharge,
al draft angle which can cause h
een designed to ensure that operator will
OEM-2013-401
Confidential Information
5
5.1 ESD Compliance
Operator must use ES
module must be scrapped.
5.2 Safety
Operator must be
5.3 Assembly
about this specific behavior.
5.4 Drop
anipulation. In
uman injuries.
6 Approval / C
6.1
CE : CE0700
FCC ID: RKXCK5050PT
IC : 5119A-CK5050PT
e scrapped. Same
s
QDID) : B021247
/ V1.2 / 24-09-2013
16/19
Page 17
CK5050+T PRODUCT PRESENTATION
and IC requirements for module application
In accordance with FCC Part 15, the
USER INFORMATIONS:
specify t
Based on the Public Notice from FCC, the host device should have a label which indicates that it
contains our module. The label should use wording such
ilar wording that expresses the same meaning may be used.
The label of the host device should also include the below FCC Statement. When it is not possible,
this information should be included in the User Manual of the host device.
with part 15 of the FCC rules. Operation is subject to the following two
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that may cause
n: Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.”
The OEM integrator is still responsible for the FCC compliance
Appropriate measurements (e.g. 15 B compliance) and
zations (e.g. Verification , Do
Ref:
is listed as a Modular Transmitter device.
T” on the product.
Contains FCC ID: RKXCK5050
requirement of the end product, which
additional equipment
to be addressed by the
OEM-2013-401
Confidential Information
6.2 FCC
FCC ID : RKXCK5050PT
IC : 5119A-CK5050PT
USA –
This intends to inform how to
Any sim
“This device complies
conditions.
undesired operation.
Cautio
FC6000TS
he FCC ID of our module “CK5050+
as: “
PT”.
integrates this module.
authori
integrator/manufacturer.
- if applicable -
C) of the host device have
/ V1.2 / 24-09-2013
17/19
Page 18
CK5050+T PRODUCT PRESENTATION
USER INFORMATIONS:
This intends to inform how to specify the IC ID of our module “CK5050+T” on
According to Canadian standards “RSS 210” and “RSS Gen”, the host device should have a label
which indicates that it contains our module. The label should use wording such
Any similar wording that expresses
The label of the host device should also include the below IC Statement.
When it is not possible, this information should be included in the User Manual of the host device.
“This device complies with Industry Canada licence
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
pareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Ref:
the product.
as: “
the same meaning may be used.
Operation is subject to
CANADA –
5119A-CK5050PT”.
the following two conditions:
operation of the device.”
«
(2) l'utilisateur de l'ap
Confidential Information
-exempt RSS standard(s).
»
OEM-2013-401
Contains IC:
/ V1.2 / 24-09-2013
18/19
Page 19
CK5050+T PRODUCT PRESENTATION
CE DECLARATION
Ref:
OEM-2013-401
Confidential Information
6.3
/ V1.2 / 24-09-2013
19/19
Loading...