Parker Hannifin 4123-PA, 60 User Manual
Pneumatic
Actuators
Catalog 4123-PA
Revised, March 2000
Pneumatic Actuators
Introduction
Parker 60 Series spring return (AC/AO) or double acting (AD) rack and pinion actuators are compact, simply designed
devices that are quality engineered to provide high torque outputs and a high cycle, trouble-free life.
A compact, dual opposed rack and pinion design and guide band suspension combine to produce a symmetrically balanced,
center mount actuator. In addition, the actuator has a short powerful stroke, rapid response, and fully concentric operating
load capability which ensures optimum performance.
Features
• Three point suspension system uses carbon filled
PTFE guide bands for piston alignment and rack support
• Dual opposed piston design uses air pressure on
two pistons to deliver a balanced force to the pinion gear
• Patented balanced piston design results in even
distribution of bearing loads and eliminates piston tilting
• Multiple spring concept permits actuator use at
40 to 120 psig (2.8 to 8.3 bar) air supply requirements
• Suitable for use with dry or lubricated air, non-corrosive
gas, or light hydraulic oil
• Aluminum alloy body construction with two component
polyurethane coating
• Manual override
Specifications
Operating Pressure
90˚ Models:
40 to 120 psig (2.8 to 8.3 bar) maximum
AC – Normally Closed Spring Return
AD – Double Acting
AO – Normally Open Spring Return
180˚ Models:
80 psig (5.5 bar) maximum
ACX – Spring Return
ADX – Double Acting
Temperature Range
-4 ˚F to 175 ˚F (-20 ˚C to 79 ˚C)
Optional high and low temperature ranges available
Options
• Solenoid valve
• Rotary limit switch with valve position indicator
• Breather block
• Dual mount actuator
61S Option
• Compact single piston design
• Available for MB, HB, B2, and B6 Series Valves
Model Shown: 4Z-B6LJ-V-SS-61AD
Operation
Actuators are manufactured with an integral air
manifold and internal porting. The air manifold is
designed for direct mounting of solenoid valves.
This eliminates the need for external tubing and
simplifies installation. For applications not requiring
a solenoid valve, the air manifold inlet ports are
marked “A” and “B”. Air inlet port “A” will rotate the
actuator counter-clockwise. Spring return actuators
fail clockwise.
2
Parker Hannifin Corporation
Instrumentation Valve Division
Jacksonville, Alabama
1.75
(44.5)
1/4" NPT
2 PLACES
UNC 10-24
X.31 DEEP
4 PLACES
0.95
(24.1)
B
D
1.26
(32.0)
A
1.75
(44.5)
1/8" NPT
2 PLACES
UNC 10-24
X.31 DEEP
2 PLACES
1.0
(25.4)
A
B
0.25
(6.4)
0.50
(12.7)
0.83
(21.1)
2.0
(50.2)
UNC 10-24
X.31 DEEP
2 PLACES
1.75
(44.5)
Pneumatic Actuators
Dimensional Data for 61 and 61S Models
1/8" NPT
2 PLACES
0.25
(6.4)
0.83
(21.1)
1.0
(25.4)
2.0
(50.2)
61S Actuator
0.50
(12.7)
A
B
C
2.36
(59.9)
2.36
(59.9)
61 Actuator
( ) Denotes dimensions in millimeters
61SAD 61SAC/O 61SADX 61SACX
Dim Inch mm Inch mm Inch mm Inch mm
A 3.37 85.6 - - 4.63 117.6 - B - - 3.66 93.0 - - 5.83 148.1
C 3.38 85.9 3.38 85.9 3.38 85.9 3.38 85.9
61AD 61AC/O 61ADX 61ACX
Dim Inch mm Inch mm Inch mm Inch mm
A 4.06 103.1 - - 6.10 154.9 - -
B - - 4.65 118.1 - - 8.50 215.9
C1 3.38 85.9 3.38 85.9 3.38 85.9 3.38 85.9
C2 2.36 59.9 2.36 59.9 2.36 59.9 2.36 59.9
C1 – Single Mount C2 – Dual Mount
Dimensional Data for 62, 63, 64, 65, 66, 68 and 69 Models
C
F
E
AB C DE F
Single Mount Dual Mount
Model Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm
62AD 6.26 159.0 - - 4.17 105.9 3.15 80.0 1.26 32.0 2.91 73.9 3.15 80.0
62AC/O - - 6.77 172.0 4.17 105.9 3.15 80.0 1.26 32.0 2.91 73.9 3.15 80.0
63AD 7.09 180.1 - - 4.68 118.9 3.86 98.0 1.32 33.5 3.39 86.1 3.66 93.0
63AC/O - - 8.03 204.0 4.68 118.9 3.86 98.0 1.32 33.5 3.39 86.1 3.66 93.0
64ADX 6.34 161.0 - - 5.00 127.0 3.98 101.1 1.69 42.9 4.27 108.5 3.98 101.1
64ACX - - 7.17 182.1 5.00 127.0 3.98 101.1 1.69 42.9 4.27 108.5 3.98 101.1
65AD 7.83 198.9 - - 5.15 130.8 4.13 104.9 1.54 39.1 3.86 98.0 4.13 104.9
65AC/O - - 9.8 248.9 5.15 130.8 4.13 104.9 1.54 39.1 3.86 98.0 4.13 104.9
66AD 8.7 221.0 - - 5.67 144.0 4.65 118.1 1.59 40.4 4.25 108.0 4.65 118.1
66AC/O - - 10.51 267.0 5.67 144.0 4.65 118.1 1.59 40.4 4.25 108.0 4.65 118.1
68ADX 7.28 184.9 - - 6.33 160.8 5.31 134.9 2.09 53.1 5.61 142.5 5.31 134.9
68ACX - - 8.5 215.9 6.33 160.8 5.31 134.9 2.09 53.1 5.61 142.5 5.31 134.9
69AD 11.14 283.0 - - 6.65 168.9 5.63 143.0 1.99 50.5 5.04 128.0 5.63 143.0
3
Parker Hannifin Corporation
Instrumentation Valve Division
Jacksonville, Alabama
69AC/O - - 14.17 359.9 6.65 168.9 5.63 143.0 1.99 50.5 5.04 128.0 5.63 143.0
Pneumatic Actuators
SEE
PAGE 3
A
B
*
Valve Dimensional Data
Valve
A B
* C* D* E*
C
*
0.26 MOUNTING
HOLES 2 PLACES
D
*
E
*
Model Shown: 4Z-B6LJ-V-SS-61AC-2
*
Series Inch mm Inch mm Inch mm Inch mm Inch mm
B2 2.23 56.6
B6 2.49 63.2
B8 2.91 73.9
MB2 2.33 59.2 1.61 40.9 0.80 20.3 0.75 19.1 1.50 38.1
MB4 2.33 59.2
MB6 2.48 63.0
HB4 2.70 68.6
SB8 2.94 74.7
SB12 3.03 77.0
SB16 3.27 83.1 N/A N/A N/A N/A N/A N/A N/A N/A
SB20 3.46 87.9
SB24 3.73 94.7
SB32 3.92 99.6
*Not applicable for SB Series Ball Valves
Recommended Actuators for B, MB, and HB Series Ball Valves*
Valve Double Acting Spring Return Spring Return
Series AD AO AC
B2LJ 61AD or 61SAD 61AO-2 or 61SAO 61AC-2 or 61SAC
B2LJ2 61AD or 61SAD 61AO-2 or 61SAO 61AC-2 or R 61SAC
B2XJ 61ADX or 61SADX 61ACX-2 or 61SACX 61ACX-2 or 61SACX
B2XJ2 61ADX or 61SADX 61ACX-2 or 61SACX 61ACX-2 or 61SACX
B6LJ 61AD or 61SAD 61AO-2 or 61SAO 61AC-2 or 61SAC
B6LJ2 61AD or 61SAD 61AO-2 or 61SAO 61AC-2 or 61SAC
B6LS2 61AD or 61SAD 61AO-2 or 61SAO 61AC-2 or 61SAC
B6LPKR 61AD or 61SAD 61AO-2 or 61SAO 61AC-2 or 61SAC
B6LSPKR 61AD or 61SAD 61AO-2 or 61SAO 61AC-2 or 61SAC
B6XJ 61ADX or 61SADX 61ACX-2 or 61SACX 61ACX-2 or 61SACX
B6XJ2 61ADX or 61SADX 61ACX-2 or 61SACX 61ACX-2 or 61SACX
B6XS2 61ADX or 61SADX 61ACX-2 or 61SACX 61ACX-2 or 61SACX
B6XPKR 61ADX or 61SADX 61ACX-2 or 61SACX 61ACX-2 or 61SACX
B6XSPKR 61ADX or 61SADX 61ACX-2 or 61SACX 61ACX-2 or 61SACX
B8LJ 61AD 61AO-2 61AC-2
B8LJ2 61AD 62AO-3 62AC-3
B8LS2 61AD 62AO-3 62AC-3
B8LPKR 61AD 62AO-3 62AC-3
B8XJ 61ADX 61ACX-2 61ACX-2
B8XJ2 61ADX 64ACX-12 64ACX-12
B8XS2 61ADX 64ACX-12 64ACX-12
B8XPKR 61ADX 64ACX-12 64ACX-12
HB4LPKR 61AD 61AO-2 or 61SAO 61AC-2 or 61SAC
HB4LK 61AD 61AO-2 or 61SAO 61AC-2 or 61SAC
HB4XPKR 61ADX 61ACX-2 or 61SACX 61ACX-2 or 61SACX
HB4XK 61ADX 61ACX-2 or 61SSACX 61ACX-2 or 61SACX
MB2A 61AD or 61SAD 61AO-2 or 61SAO 61AC-2 or 61SAC
MB2L 61AD or 61SAD 61AO-2 or 61SAO 61AC-2 or 61SAC
MB2X 61ADX or 61SADX 61ACX-2 or 61SACX 61ACX-2 or 61SACX
MB4A 61AD or 61SAD 61AO-2 or 61SAO 61AC-2 or 61SAC
MB4L 61AD or 61SAD 61AO-2 or 61SAO 61AC-2 or 61SAC
MB4X 61ADX or 61SADX 61ACX-2 or 61SACX 61ACX-2 or 61SACX
MB6A 61AD or 61SAD 61AO-2 or 61SAO 61AC-2 or 61SAC
MB6L 61AD or 61SAD 61AO-2 or 61SAO 61AC-2 or 61SAC
MB6X 61ADX or 61SADX 61ACX-2 or 61SACX 61ACX-2 or 61SACX
*With 60 psig (4.1 bar) actuation pressure
4
Parker Hannifin Corporation
Instrumentation Valve Division
Jacksonville, Alabama
Loading...