Paragon Disk Wiper - 11 Professional Instruction Manual

PARAGON Software GmbH

Heinrich-von-Stephan-Str. 5c  79100 Freiburg, Germany

Tel. +49 (0) 761 59018201  Fax +49 (0) 761 59018130

Internet www.paragon-software.com  Email sales@paragon-software.com

Disk Wiper™ 11 Professional

User Manu al

Contents

Introduction .......................................................................................................................... 5

What’s New in Disk Wiper 11 ...................................................................................................................... 5

Product Components ............................................................................................................. 5

Features Overview ................................................................................................................. 6

Features ..................................................................................................................................................... 6

User Friendly Fault Minimizing Interface ................................................................................................................................ 6

Partition/Hard Disk Management Facilities ............................................................................................................................ 6

Wipe Facilities ......................................................................................................................................................................... 6

Automatization Facilities ........................................................................................................................................................ 6

Auxiliary Facilities ................................................................................................................................................................... 7

Supported Data Erasure Algorithms ............................................................................................................ 7

Supported Technologies .............................................................................................................................. 7

Supported File Systems ............................................................................................................................... 8

Supported Media ........................................................................................................................................ 8

Getting Started ...................................................................................................................... 8

Distribution ................................................................................................................................................ 8

Distributive CD ........................................................................................................................................................................ 8

Online Distribution.................................................................................................................................................................. 9

Registration ............................................................................................................................................................................. 9

How to Download Updates/Upgrades .................................................................................................................................. 10

Contacting Paragon Software GmbH .......................................................................................................... 10

System Requirements ................................................................................................................................ 10

Installation ................................................................................................................................................ 11

First Start ................................................................................................................................................... 12

Building wiping media ................................................................................................................................ 13

Booting from the Linux/DOS wiping media ................................................................................................. 14

Startup .................................................................................................................................................................................. 14

Boot menu ............................................................................................................................................................................ 15

Booting from the WinPE wiping media ....................................................................................................... 17

Startup .................................................................................................................................................................................. 17

Basic Concepts ..................................................................................................................... 18

Data Sanitization........................................................................................................................................ 18

Data Security Standards ............................................................................................................................. 19

Dynamic Disks ............................................................................................................................................ 20

GPT versus MBR ......................................................................................................................................... 21

64-bit Support ............................................................................................................................................ 21

Scheduling ................................................................................................................................................. 21

Windows Components ........................................................................................................ 21

Interface Overview .................................................................................................................................... 22

General Layout ...................................................................................................................................................................... 22

Main Menu ........................................................................................................................................................................... 23

Tool Bar ................................................................................................................................................................................. 25

Virtual Operations Bar .......................................................................................................................................................... 25

Common Tasks Bar ............................................................................................................................................................... 25

Disk Map ............................................................................................................................................................................... 26

Explorer Bar .......................................................................................................................................................................... 27

Legend Bar ............................................................................................................................................................................ 28

Status Bar .............................................................................................................................................................................. 28

Settings Overview ...................................................................................................................................... 28

General Options .................................................................................................................................................................... 29

Wipe Options ........................................................................................................................................................................ 30

Wipe Report Options ............................................................................................................................................................ 30

Partitioning Options .............................................................................................................................................................. 31

E-Mail Options ...................................................................................................................................................................... 31

Operation Dependency Options ........................................................................................................................................... 32

Virtual Mode Options ........................................................................................................................................................... 33

Log Files Options ................................................................................................................................................................... 33

Viewing Disk Properties ............................................................................................................................. 34

Partition Management ............................................................................................................................... 35

Basic Partitioning Operations ............................................................................................................................................... 35

Hard Disk Management ............................................................................................................................. 40

Updating MBR ....................................................................................................................................................................... 40

Wipe Tasks ................................................................................................................................................ 41

Task Scheduling ......................................................................................................................................... 44

Setting a Timetable ............................................................................................................................................................... 44

Managing Tasks .................................................................................................................................................................... 45

Creating a Scheduled Task .................................................................................................................................................... 47

Scripting .................................................................................................................................................... 47

Extra Functionality ..................................................................................................................................... 49

View Partition/Hard Disk Properties ..................................................................................................................................... 49

File Transfer Wizard .............................................................................................................................................................. 50

Mount Partition .................................................................................................................................................................... 51

Test Surface .......................................................................................................................................................................... 52

Check File System Integrity ................................................................................................................................................... 53

Check Recovery Discs ............................................................................................................................................................ 53

Edit/View Sectors .................................................................................................................................................................. 54

Send Log Files ........................................................................................................................................................................ 55

View Logs .............................................................................................................................................................................. 56

Typical Scenarios ................................................................................................................. 57

Recovery Scenarios .................................................................................................................................... 57

Fixing MBR after a boot virus attack ..................................................................................................................................... 57

Correcting BCD (Boot Configuration Data) ........................................................................................................................... 59

Fixing Windows startup ability ............................................................................................................................................. 60

Copying of data from the corrupted system disk to another hard disk ............................................................................... 63

Burning of data from the corrupted system disk to CD/DVD ............................................................................................... 65

Hard Disk Utilization .................................................................................................................................. 67

Extra Scenarios for WinPE .......................................................................................................................... 69

Adding specific drivers .......................................................................................................................................................... 69

Configuring network ............................................................................................................................................................. 70

Saving log files ....................................................................................................................................................................... 72

Troubleshooter .................................................................................................................... 73

Glossary ............................................................................................................................... 75

Our company is constantly releasing new versions and updates to its software, that's why images shown in this manual may be different from what you see on your screen.

Introduction

Data security nowadays is the burning issue not only for companies and government agencies, but rank and file people as well. Our personality is now fully embedded in computer technology. It is computer you apply to when at work, it is also computer you use at home for entertainment or as a reservoir for containing some valuable data such as personal

correspondence, banking account information, credit card numbers, financial records, whatever… It is obvious that this

kind of data should in no way be available to others. That is why, when disposing of a storage device (a hard disk or a flash memory drive), the crucial thing is to make sure it does not contain any information, because simple deletion, or even reformatting do not guarantee data security at all. To do that, you need a specially designed tool.

Paragon Disk Wiper™ 11 Professional is a fast, convenient and reliable solution providing irreversible destruction of data on separate partitions or entire hard disks (IDE, SCSI, SATA, USB, etc.) as well as any type of flash memory devices.

In this manual you will find the answers to many of the technical questions, which might arise while using the program.

What’s New in Disk Wiper 11

 Check FS Integrity and Data Loss Policies to let you specify the acceptable balance between the operation

performance and the risk of data loss.

 WinPE 3.0 based bootable environment to enjoy support of a wider range of hardware configurations with the

option to add drivers for specific hardware on-the-fly.

 The updated Boot Corrector for WinPE that now equals the functionality of the Linux/DOS counterpart.  WinPE traceroute/ping utility to get detailed information on particular routes and measure transit delays of

packets across an Internet Protocol (IP) network.

 Better support for 64-bit platforms to reboot your computer to one of the three special modes (Windows

native, Linux, or DOS) to automatically complete operations, which cannot be accomplished under 64-bit Windows.

 Support of the restart-free installation.  AFD (Advanced Format Drive) ready.  Support of 2TB+ and non-512B sector size drives.  USB 3.0 ready.

Product Components

In order to cope with different tasks, the product contains several components:

 Windows based set of utilities is the crucial part of the product. With the help of an easy to use launcher you

may find and run tasks of any complexity in the field of data and system protection, hard disk partitioning and cloning, etc.

 Linux/DOS based environment is a multi-platform bootable media that enables to run utilities under Linux or

PTS DOS, and that way to get access to your hard disk for maintenance or recovery purposes. Both platforms

Scheduling is only available for the Windows installation of the program.

have their strong sides, for instance Linux can boast support of FireWire (i.e. IEEE1394) or USB devices. It enables to burn CD/DVD discs. However there can be some difficulties with detecting new hardware. DOS in its turn has no problems of that kind but is limited in features. The Linux/DOS environment requires no installation and can be of great help when the system fails to boot. Besides it offers a Windows XP like environment.

 WinPE based environment. Especially for keen followers of Windows, our product also offers a WinPE 3.0 based

bootable media. Unlike the Linux/DOS environment it can boast an excellent hardware support and the same interface as the Windows version can. However its system requirements are much tougher.

Features Overview

This chapter dwells upon key benefits and technical highlights of the product.

Features

Let us list some of the features:

User Friendly Fault Minimizing Interface

 Graphical representation of the data to gain a better understanding.  A handy Launcher to easily find and run the required tasks.  Comprehensive wizards to simplify even the most complex operations.  A context sensitive hint system for all functions of the program.  Previewing the resulting layout of hard disks before actually executing operations (so-called virtual

operations).

Partition/Hard Disk Management Facilities

 Basic functions for initializing, partitioning and formatting hard disks (create, format, delete). Instead of the

standard Windows disk tools, the program supports all popular file systems.

 Mount a partition (assign a drive letter) of any file system type to make it available for your operating system.

Wipe Facilities

 Data wiping to successfully destroy all on-disk information including the standard bootstrap code and other

system service structures.

 Free space clearing to destroy any remnants of deleted files/directories left on disk without affecting the used

data.

Automatization Facilities

 Task scheduling to automate routine operations. It can be particularly effective when you have to repeat a

sequence of actions on a regular basis.

 Scripting to make the program create a script of any set of operations you need. Besides support of all

operations available in the interactive mode, the unattended mode provides some additional features, such as

Boot Corrector is only available for the bootable environment.

To know more on the subject, please consult the Data Security Standards section.

conditional execution, subroutines, repeatable iterations, disk/partition properties analysis, errors management, etc.

Auxiliary Facilities

 File Transfer Wizard to make such operations as transferring of files/directories or burning of them to CD/DVD

as easy and convenient as possible. Providing access to Paragon backups as regular folders, it may also help to replace corrupted data from a previously created image in case of an operating system failure.

 Wiping Media Builder to create a bootable media on a CD, DVD disc, or flash memory, which can later be used

to boot and irreversibly destroy the on-disk data. Moreover, with its help you can save data from partitions of your hard disk directly to compact discs or burn ISO-images. The utility supports various formats of laser discs: CD-R/RW, DVD-R/RW, DVD+R/RW, DVD-R, DVD+R double layer, Blu-ray and can handle multi-session burning.

 Network Configuration Wizard to establish a network connection on a wiping media.  Boot Corrector to fix most of the system boot problems that can be a result of a human factor, program error or

a boot virus activity.

Supported Data Erasure Algorithms

 US DoD 5220.22-M  US Navy standards NAVSO P-5239-26  British HMG Infosec Standard No.5  German VSItR Standard  Australian ASCI 33  Russian GOST R 50739-95  Peter Gutmann's algorithm  Bruce Schneier's algorithm  Paragon's algorithm  Custom algorithm

Supported Technologies

Along with using innovative technologies from outside, Paragon has developed a number of its own original technologies that make its products unique and attractive for customers:

 Paragon UFSD™ technology to browse partitions of any file system including hidden and unmounted, modify

and copy files and folders, etc.

 Paragon BTE™ technology to set tasks for execution during the system restart, thus saving from the need to use

a bootable media when modifying system partitions.

 Microsoft Dynamic Disk (simple, spanned, striped, mirrored, RAID-5) to offer more management flexibility

without the partition limitation of basic disks. Dynamic storage can be particularly beneficial for large-scale businesses when dealing with many physical hard disks involving complex setup.

Unfortunately, support of non-Roman characters for the HFS+ file system is unavailable at the moment. The company is about to implement it in the nearest future.

 GUID Partition Table (GPT). It is the next generation of a hard disk partitioning scheme developed to lift

restrictions of the old MBR. GPT disks are now supported by Windows Vista/7, Server 2008, Mac OS X and Linux.

Supported File Systems

 Full read/write access to FAT16/FAT32 partitions.  Full read/write access to NTFS (Basic Disks) under Windows, Linux and PTS DOS. Compressed NTFS files are also

supported.

 Full read/write access to Ext2FS/Ext3FS/Ext4FS partitions.  Limited read/write access to Apple HFS+ partitions.

Supported Media

 Support of both MBR and GPT hard disks (2.2TB+ disks included)  IDE, SCSI and SATA hard disks  SSD (Solid State Drive)  AFD (Advanced Format Drive)  Non-512B sector size drives  CD-R, CD-RW, DVD-R, DVD+R, DVD-RW, DVD+RW, DVD-R, DVD+R double layer and also Blu-ray discs  FireWire (i.e. IEEE1394), USB 1.0, USB 2.0, USB 3.0 hard disks  PC card storage devices (MBR and GPT flash memory, etc.)

Getting Started

In this chapter you will find all the information necessary to get the product ready to use.

Distribution

Paragon Disk Wiper 11 is distributed in two ways:

 Boxed package from Paragon Software GmbH and resellers  Downloadable package over the Internet at the company’s web-site

Distributive CD

The boxed package includes a distributive CD that is in fact a bootable environment with auto-run of the Windows installation, thus it can be used as a ready-made solution. But if you’re going to run the Windows components, you need to install them first (see Installation).

If you want to download an update/upgrade of the product, it will be in form of the downloadable installation package as described in Online Distribution).

Depending on your product and edition, you might need to additionally download an image of our WinPE environment, which opens the option to prepare it on a CD/DVD/BD or a flash card before installing our software.

It is recommended to use Internet Explorer 5+ or any compatible browser.

Online Distribution

Disk Wiper 11 purchased over the Internet will be in form of an MSI package. After installing the product you can launch the Wiping Media Builder to prepare a wiping media.

Registration

Paragon Software GmbH provides a wide range of online services through its web-portal - www.paragon-

software.com/support/:

 Registration of new users;  Registration of purchased products for registered users;  Available around-the-clock downloading center, where registered users can get product updates/upgrades as

well as all the necessary documentation;

 Downloadable free demo versions and open documentation for all users.

To register as a new user

To register as a new user, please do the following:

1. Run an Internet browser and visit the page: www.paragon-software.com/my-account/;

2. Click Create of the Create a Paragon Account section;

3. Fill out a registration form;

4. Click Register.

The most important field in the form is an E-mail address, as it serves as a login to enter the system. Besides your access password will be sent to this address as well.

To register a new product

If you are a registered user and would like to register Disk Wiper 11, please do the following:

1. Run an Internet browser and visit the page: www.paragon-software.com/my-account/;

2. In the Email field of the Authorization section, enter an E-mail used for registration;

3. In the Password field enter a password received after registration;

4. Click Sign in;

5. If the user name and password are valid, you will get to your account;

6. Click Register new product of the Products section;

Service

Contact

Visit Paragon Software web site

www.paragon-software.com

Registration & updates web-service

www.paragon-software.com/support

Knowledge Base & Technical Support

kb.paragon-software.com

Pre-sale information

sales@paragon-software.com

7. Enter your product serial number in the Serial Number field. You can find it in the product box or obtain from

your reseller. Click Next;

8. On the next page you will be asked to provide some additional data. Also you will need to decide whether you

want to get confirmation on registering the product by E-mail or not. Click Next, and then click Finish.

That is all. The product is now registered.

How to Download Updates/Upgrades

Downloading of updates/upgrades can be fulfilled in the following way:

1. Run an Internet browser and visit the page: www.paragon-software.com/my-account/;

2. In the Email field of the Authorization section, enter an E-mail used for registration;

3. In the Password field enter a password received after registration;

4. Click Sign in;

5. If the user name and password are valid, you will get to your account;

6. Select My Downloads of the Products section to see what updates are available for you;

7. Select the desired update and click Download.

Contacting Paragon Software GmbH

If you have any questions about the company products, please do not hesitate to contact Paragon Software GmbH.

System Requirements

For the Windows installation package

 Operating systems:

- Windows XP (32 and 64 bit)

- Windows Server 2003 (32 and 64 bit)

- Windows Vista (32 and 64 bit)

- Windows Server 2008 (32 and 64 bit)

- Windows 7 (32 and 64 bit)

- Windows Server 2008 R2 (64 bit only)

 Internet Explorer 5.0 or higher

During the installation additional free space (up to 1GB) will be required.

In case there is some previous version of the program installed on the computer, the program will offer the user to uninstall it first.

 Intel Pentium CPU or its equivalent, with 300 MHz processor clock speed  128 MB of RAM (256+ recommended)  Hard disk drive with 250 MB of available space  SVGA video adapter and monitor  Keyboard  Mouse

For the Linux bootable environment

 Intel Pentium CPU or its equivalent, with 300 MHz processor clock speed  256 MB of RAM  SVGA video adapter and monitor  Keyboard  Mouse

For the WinPE bootable environment

 Intel Pentium III CPU or its equivalent, with 1000 MHz processor clock speed  At least 512 MB of RAM  SVGA video adapter and monitor  Keyboard  Mouse

Additional requirements

 Network card to send/retrieve data to/from a network computer  Recordable CD/DVD drive to burn data to compact discs  External USB hard drive to store data.

Installation

To install Paragon Disk Wiper 11, please do the following:

1. Run Setup Application. Click on the *.MSI file. This application will guide you through the process of the

program installation. The setup utility is compiled with the InstallShield SDK, hence it contains the standard user interface and set of installation steps.

2. Starting Setup. The Welcome page informs that the application is being installed. Click the Next button to

continue.

Do not install the program on network drives. Do not use Terminal Server sessions to install and run the program. In both cases, the program functionality will be limited.

To accomplish online operation on locked partitions/hard disks the program uses a kernel mode hotcore driver, thus the system reboot is required to complete the installation procedure.

3. Confirm License Agreement. The License Agreement page displays the Paragon License Agreement. Read the

agreement and then select the appropriate option to accept. If you do not agree with any conditions stated there, the installation process will be interrupted. By clicking the Print button, the License Agreement may also be printed out.

4. Provide Registration Information. On the Registration page you are to provide your product key and serial

number.

5. Provide Customer Information. On the Customer Information page you are to provide the standard

information, i.e. a user name and an organization. Besides you need to decide whether to make the program available for all users of this computer (if several) or only for the current one.

6. Select an Installation Folder. The Destination Folder page allows you to choose a folder where the program will

be installed. By default, the installation folder will be created as:

C:\Program Files\Paragon\Paragon Disk Wiper 11. To select another folder, click the Change… button.

After you have selected the required folder, click the Next button to continue.

7. Confirm Installation. On the Ready to Install the Program page click the Install button to start the installation or

the Back button to return to any of the previous pages and modify the installation settings.

8. Copying Files. The Copying Files page shows the overall progress of the installation. Click the Cancel button to

abort the setup.

9. Finishing the Installation. The Final page reports the end of the setup process. Click the Finish button to

complete the wizard.

First Start

To start Paragon Disk Wiper 11 under Windows, please click the Windows Start button and then select Programs > Paragon Disk Wiper™ 11 > Paragon Disk Wiper™.

The first component that will be displayed is called the Express Launcher. Thanks to a well thought-out categorization and hint system, it provides quick and easy access to wizards and utilities that we consider worth using on a regular basis. With its help you can also start up the traditional launcher, the help system or go to the program’s home page.

To know more on how to handle the product’s interface and accomplish typical operations,

please consult the Windows Components chapter.

There are other ways to start up this function, please consult the Interface Overview chapter to know more on the subject.

Building wiping media

Wiping Media Builder can help you accomplish the following operations:

 Prepare the Linux/DOS environment (included in the installation package) on external media (CD, DVD, or flash

memory) to boot and run utilities under Linux or PTS DOS (strongly recommended);

 Prepare a custom Linux/DOS environment by adding any data you like to the standard image;  Prepare a bootable environment from any ISO image, including our WinPE 3.0 image (strongly recommended);  Create from the master CD the Linux/DOS or WinPE environment on a CD/DVD disc, or flash memory.

Below you can find how to build our WinPE 3.0 based environment on a thumb drive:

1. Plug in a thumb drive of at least 250 MBs in size. Please note all data on that drive will be deleted.

2. In the Main Menu: select Tools > Wiping Media Builder…

3. On the Wizard's Welcome page, click the Next button.

4. Select the Flash Memory option.

You can get an ISO image of our WinPE 3.0 environment through the company’s web service.

5. Select the User specified CD/DVD image (.iso file) option, then browse for an ISO image of our WinPE 3.0

environment or manually type in a full path to it. By selecting the Typical option you can build our Linux/DOS environment, which we highly recommend you to do as well.

6. Select the required thumb drive from the list of flash memory devices available in the system at the moment (if

several).

7. You will have to confirm the operation.

Booting from the Linux/DOS wiping media

The Linux/DOS environment can be used to boot your computer into Linux or PTS DOS to get access to your hard disk for maintenance or recovery purposes. It also has the PTS DOS safe mode, which may help in a number of non-standard situations such as interfering hardware settings or serious problems on the hardware level. In this case, only basic files and drivers (such as hard disk drivers, a monitor driver, and a keyboard driver) will be loaded.

Startup

To start working with the Linux/DOS environment, please take the following steps:

1. Start up the computer from our Linux/DOS wiping media.

Wiping Media Builder can help you prepare our environment either on a CD/DVD disc or a

thumb drive.

To automatically boot from the wiping media please make sure the on-board BIOS is set up to boot from CD/USB first.

By default the Normal Mode will be automatically initiated after a 10 second idle period.

While working with the environment you might experience some inconvenience caused by possible video artifacts. It is just a result of changing video modes and in no way will affect the program functionality. If this is the case, please wait a bit and everything will be OK.

2. Launch a boot mode you need (Normal, Safe, Low-Graphics Safe) in the Boot menu.

3. Click on the required operation to start. Hints on the selected at the moment item will help you make the right

choice.

4. Consult the help system by pressing ALT+F1 to know more on the subject.

Boot menu

The Boot menu contains the following commands:

 Normal Mode. Boot into the Linux normal mode. This mode uses the full set of drivers (recommended);  Safe Mode. Boot into the PTS DOS mode. This mode can be used as an alternative of the Linux normal mode if it

fails to work properly;

 Low-Graphics Safe Mode. Boot into the PTS DOS safe mode. In this case, only the minimal set of drivers will be

included, like hard disk, monitor, and keyboard drivers. This mode has simple graphics and a simple menu;

 Floppy Disk. Reboot the computer from a system floppy disk;  Hard Disk 0. Boot from the primary hard disk;  Find OS(s) on your hard disks. The program will scan hard disks of your computer to find any bootable operating

system.

To move within the menu, please use the arrow keys of the computer keyboard.

Normal Mode

When the Normal mode is selected, the Linux launch menu appears:

 Wipe Wizard (enables to destroy all on-disk information or only remnants of deleted files/directories);  File Transfer Wizard (allows coping files/folders to another disk or a partition as well as recording them to

CD/DVD);

 Boot Corrector (helps to correct the Windows System Registry without Windows being loaded);  Log Saver (helps to collect and send the necessary log files to the Technical Support);  Command Line (allows experienced users to execute any operation);  Reboot the computer;  Power off the computer.

To move within the menu, please use the arrow keys of the computer keyboard.

Safe Mode

When the Safe mode is selected, the PTS DOS launch menu appears. It has nearly the same functionality as for the Normal mode except for the Network Configurator and Log Saver commands. Besides due to certain limitations of the PTS DOS environment, there is no possibility to burn CD/DVD discs.

Low Graphics Safe Mode

When the Low Graphics mode is selected, the PTS DOS launch menu appears. It has the same functionality and looks similar to the Safe mode but graphically simpler.

Wiping Media Builder can help you prepare our environment either on a CD/DVD disc or a

thumb drive.

To automatically boot from the wiping media please make sure the on-board BIOS is set up to boot from CD/USB first.

Booting from the WinPE wiping media

The WinPE environment can be a real alternative to the Linux/DOS environment. Providing nearly the same level of functionality it offers an excellent hardware support and the same interface as the Windows version does.

Startup

To start working with the WinPE environment, please take the following steps:

1. Start up the computer from our WinPE wiping media.

2. Once it has been loaded, you will see the License Agreement. Read the agreement and then mark the

appropriate checkbox to accept. If you do not agree with any conditions stated there, you won’t be able to use the program.

3. Once you accept the agreement, you will see the Universal Application Launcher. In general it enables to run

components of the product, load drivers for undefined hardware or establish a network connection.

Our WinPE 3.0 based environment offers excellent hardware support. However in case it

doesn’t have a driver for your disk controller, your hard disks will be unavailable. Please

consult the Adding specific drivers scenario to know how to tackle this issue.

4. Click on the required operation to start. Hints on the selected at the moment item will help you make the right

choice.

5. Consult the help system by pressing ALT+F1 to know more on the subject.

Basic Concepts

This chapter explains terms and ideas that show how the program works. To understand these helps to obtain a general notion of the operation performance and makes it easier for the user to operate the program.

Data Sanitization

Data security is a two-sided problem. It is to be made clear, that providing confidentiality implies not only information to be stored properly, but also be destroyed according to certain rules. The first step to protecting yourself is to know exactly which security precautions work and which do not.

Many people believe the misconception that repartitioning a disk will result in complete destruction of its contents. Actually that is not quite so. Repartitioning the drive only alters references to partitions in the Partition Table, leaving all file data intact. In fact, there are a number of programs available to successfully recover previously deleted partitions.

Formatting a drive also does not guarantee data destruction. Formatting procedure implies modification of the Master File Table (MFT) that keeps track of where file contents are stored on the disk and verification of each sector for consistency. Even a low-level format does not actually erase the file contents for good, since they can still be

resurrected from their deleted state with minimal effort by using the popular today Magnetic Force Microscopy technology.

The only way to make sure that all the data has been erased from a hard drive is to overwrite all on-disk sectors with random patterns of ones and zeros. Although this sounds complex, there is an easy way to do this.

The process of deliberately, irreversibly removing or destroying the data stored on a memory device (magnetic disks, flash memory drives, etc.) is generally known as Data Sanitization. A device that has been sanitized has no usable residual data and even advanced forensic tools should not ever be able to recover it, thus providing maximum level of security.

Data Security Standards

To irreversibly destroy all on-disk information there have been developed a number of disk sanitizing standards. They are distinguished by wiping patterns and number of passes:

1. US DoD 5220.22-M. US Department of Defense recommends to overwrite all addressable locations with a

character, its complement and then a random character. Finally, the target data area is to be verified;

2. US Navy standards NAVSO P-5239-26.  NAVSO P-5239-26 for RLL encoded drives. At first to write the fixed value (0xffffffff) to the target data area,

then the fixed value (0x27ffffff), and then random values. Finally, the target data area is to be verified;

 NAVSO P-5239-26 for MFM encoded drives. At first to write the fixed value (0xffffffff) to the target data

area, then the fixed value (0xbfffffff), and then random values. Finally, the target data area is to be verified;

3. British HMG Infosec Standard No.5. At first to write a single character pattern, then its complement and then a random character. Finally, the target data area is to be verified;

4. German VSItR Standard. Overwrite the deleted information 7 times, consistently filling it with the following patterns: 0x00, 0xFF, 0x00, 0xFF, 0x00, 0xFF, 0xAA. Finally, the target data area is to be verified;

5. Australian ASCI 33. Overwrite with a character (C), then verify. Overwrite with –C (the first pass character’s inverse), then verify again. Overwrite everything with both C and –C once again but without verification. Fill everything with random characters;

6. Russian GOST R 50739-95. Destroy information by a single pass with writing random characters into each sector byte;

7. Peter Gutmann's algorithm. A whopping 35 passes, with 27 random-order passes using specific patterns combined with eight passes using random patterns;

8. Bruce Schneier's algorithm. Two passes of specific patterns followed by five passes using a cryptographically secure pseudo-random sequence;

9. Paragon's algorithm.  Overwrite each sector with a forcefully randomized 512-byte string, new for each sector, using CSPRNG

(cryptographically secure pseudo-random number generator);

 Overwrite each erased sector with its complement;  Overwrite each sector with a 512-byte string (CSPRNG), again forcefully randomized and different from the

first pass, and new for each sector;

Military and government standards always require 100 percent residual data verification. It is necessary to make sure that the operation has been properly accomplished. Besides corrupted sectors discovered during the operation are to be logged to keep the user informed, since these sectors may contain classified information.

The list of supported military and government standards may vary for your product.

Anyway you’ve always got the possibility to create a customized algorithm, defining up to 4

wiping patterns, number of passes for each wiping pattern and for the group of patterns, thus providing the maximum possible security level.

 Fill each erased sector with 0xAA value. Finally, the target data area is to be verified.

Dynamic Disks

As you probably know, MS-DOS, Microsoft Windows 95/98/Me/NT/2000/XP/Vista/Server 2003/2008 support four primary partitions per physical hard disk, one of which can be extended. Certainly there is the possibility to create logical drives within the extended partition. Such types of disks are called basic. Windows XP Professional, Windows 2000, Windows Vista and Windows Server 2003/2008 follow the same strategy: You can have a maximum of four primary partitions, one of which can be an extended partition with logical drives. However, these operating systems also introduce a new disk configuration type - dynamic disk - which must be understood to effectively configure and manage hard disks.

Dynamic disk is a physical disk that doesn't use partitions or logical drives. Instead, it contains only dynamic volumes. Regardless of what format you use for the file system, only Win2K computers can access dynamic volumes directly. However, computers that aren't running Win2K can access the dynamic volumes remotely when connected to the shared folders over the network.

Dynamic disks can co-exist on a system with basic disks. The only limitation is that you cannot mix Basic and Dynamic disks on the same hard drive.

There are five types of dynamic volumes: simple (uses free space from a single disk), spanned (created from free disk space that is linked together from multiple disks), striped (a volume the data of which is interleaved across two or more physical disks), mirrored (a fault-tolerant volume the data of which is duplicated on two physical disks, and RAID-5 volumes (a fault-tolerant volume the data of which is striped across an array of three or more disks).

With dynamic storage, you can perform disk and volume management without the need to restart Windows.

Limitations:

 Dynamic disks are not supported on portable computers.  Dynamic disks are not supported on Windows XP Home Edition-based computers.  You cannot create mirrored volumes or RAID-5 volumes on Windows XP Home Edition, Windows XP

Professional, or Windows XP 64-Bit Edition-based computers.

Thus, the dynamic disk is a new way of looking at hard disk configuration. Dynamic disks offer you more management flexibility without the partition limitation of basic disks. Dynamic disks can contain an unlimited number of volumes, but they cannot contain partitions or logical drives. Dynamic storage can be particularly beneficial for large-scale businesses when dealing with many physical hard disks involving complex setup.

GPT versus MBR

GUID Partition Table (GPT) is the next generation of a hard disk partitioning scheme developed to lift restrictions of the old MBR. Being a part of the Extensible Firmware Interface (EFI) standard proposed by Intel to replace the outdated PC BIOS, it offers a number of crucial benefits:

 Up to 128 primary partitions for the Windows implementation (only 4 in MBR);  The maximum allowed partition size is 18 exabytes (only 2 terabytes in MBR);  More reliable thanks to replication and cyclic redundancy check (CRC) protection of the partition table;  A well defined and fully self-identifying partition format (data critical to the platform operation is located in

partitions, but not in un-partitioned or hidden sectors as this is the case with MBR)

64-bit Support

The bulk of software today is written for a 32-bit processor. It can meet the requirements of almost any end user. However that is not the case when dealing with servers processing large amounts of data with complex calculations of very large numbers. That is where 64-bit architecture comes into play.

It can boast improved scalability for business applications that enables to support more customer databases and more simultaneous users on each server. Besides a 64-bit kernel can access more system resources, such as memory allocation per user. A 64-bit processor can handle over 4 billion times more memory addresses than a 32-bit processor. With these resources, even a very large database can be cached in memory.

Although many business applications run without problems on 32-bit systems, others have grown so complex that they use up the 4 GB memory limitation of a 32-bit address space. With this large amount of data, fewer memory resources are available to meet memory needs. On a 64-bit server, most queries are able to perform in the buffers available to the database.

Some 32-bit applications make the transition to the 64-bit environment seamlessly others do not. For instance, systemlevel utilities and programs that provide direct hardware access are likely to fail. Our program offers a full-fledged support of the 64-bit architecture providing fault-tolerant work for such system dependent modules as Hot Processing.

Scheduling

The automation of operations is particularly effective when you have to repeat a sequence of actions on a regular basis. For example, developing a specific project on a day-to-day basis and having to make a backup every evening so as not to lose the valuable data, you will really appreciate, when this kind of routine operations will be carried out automatically without your participation.

Another aspect of any automation process is that it allows an optimization of your computer’s work-load. This is especially important when operations require a considerable amount of computer resources – processor time, memory and more. A number of tasks, which can decrease the performance, can be run during the night or whenever the computer has the least work-load to perform.

The program has a special tool for scheduling. You can set out a timetable for any operation and it will start at a specified time without interrupting your current activity.

Windows Components

In the given section you can find all the information necessary to successfully work with the Windows version of the product.

1. Main Menu

2. Tool Bar

3. Virtual Operations Bar

4. Common Tasks Bar

5. Explorer Bar

6. Disk Map

7. Legend Bar

8. Status Bar

Interface Overview

This chapter introduces the graphical interface of the program. The design of the interface precludes any mistake being made on the part of the user. Most operations are performed through the system of wizards. Buttons and menus are accompanied by easy understandable icons. Nevertheless, any problems that might occur while managing the program can be tackled by reading this very chapter.

General Layout

When you start the program, the first component that is displayed is called the Launcher. It enables to run wizards and dialogs, to specify program settings, to visualize the operating environment and the hard disk configuration.

The Launcher’s window can be conditionally subdivided into several sections that differ in their purpose and

functionality:

MENU ITEM

FUNCTIONALITY

Tools

View Log Files

View logs on the carried out operations

Send Log Files

Compress and send the log to the Paragon Support Team

Wiping Media Builder…

Start up your computer for maintenance or recovery purposes

Check Recovery Discs…

Verify the wiping media for integrity and ability to boot from

File Transfer Wizard…

Transfer data from any media

Settings...

Edit the general settings of the program

Exit

Exit the program

Changes

Generate Script…

Generate a script for the task

Save to Scheduler…

Schedule pending operations

Undo `the last virtual operation`

Cancel the last virtual operation on the List of Pending Operations

Redo `the last virtual operation`

Cancel the last undo virtual operation on the List of Pending Operations

View Changes…

Display the List of Pending Operations

Apply Changes

Launch the real execution of virtual operations

Discard All Changes

Cancel all virtual operations on the List of Pending Operations

Reload Disk Info

Refresh the current information about disks

Wizards

Wipe Hard Disk or Partition...

Destroy all on-disk information or only remnants of deleted files/directories

Hard Disk

Update MBR

Update MBR (Master Boot Record) of the selected hard disk

Wipe Hard Disk…

Irreversibly destroy all on-disk information

A number of panels offer similar functionality with a synchronized layout. The program enables to conceal some of them to simplify the interface management.

All panels are separated by vertical and horizontal expandable sliders, allowing the user to customize the screen layout.

Main Menu

The Main Menu provides access to the entire functionality of the program. The available functions are as listed below:

+ 53 hidden pages

Paragon Disk Wiper - 11 Professional Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual