Paragon 8220 User Manual

Owner’s Manual

For The Dog Hut™

Warmer Model Numbers:

DogHut
DogHut

8020 (120v)
8220 (220v)

www.ManufacturedFun.com

Paragon International, Inc. • 731 W. 18th Street P.O. Box 560 • Nevada, IA 50201 USA

Phone [phone] • Toll-free [phone] • Fax [phone] • E-mail: [e-mail]

I

ntroduction

Paragon is proud to be your

partner for Manufactured Fun!

Our goal is to provide you with the best solutions to attract customers,

expand your business, and improve your prots. That’s why this

product has been specially-crafted to meet precise specications for

performance, efciency, and output.

Y

Our

• Heavy Duty 20 gauge stainless steel construction
throughout.

P

aragOn

D

Og

H

ut

F

eatures

:

• Removable product trays and doors make for simple
easy clean up. Dishwasher safe!

• Automatic shutoff feature when water gets below a
certain level, plus, quick turn water release valve.

• Variable adjustable thermostat.

• Divided hotdog tray allows various sizes to be cooked
simultaneously.

• Strikingly brilliant graphics on both sides allow for
either front-counter or rear-counter merchandising.

Thank you for your purchase and enjoy!

Should you have any questions about your equipment, or

would like to know more about our other innovative concession

equipment and supplies, please contact us at 1-800-433-0333 or

visit us on the web at ManufacturedFun.com

p.

3

saFetY PrecautiOns

Paragon values your continued safety above all else. Please follow

these guidelines when using your equipment to prevent injury and

maximize product performance:

No direct contact to equipment by the
general public should be allowed when
used in food service locations. Only trained
personnel should operate this equipment.
Carefully read any and all instructions before
beginning operation of the equipment.

Always wear safety glasses when servicing
equipment.

ATTENTION

CAUTION

CHAUD

HOT

Avoid touching the cabinet surfaces which
may have temperatures over 170� F. (77� C)
Use caution when opening either door due
to steam exiting out.

Any repair made to equipment by anyone other
than qualied personnel will void warranty
and may also create unsafe working conditions.
NEVER make alterations to the equipment. To
reduce the risk of electrical shock, do not remove
or open cover. Paragon’s customer service will
provide assistance or documentation for any
electrical repairs.

Machine must be properly grounded to prevent
electrical shock. Do NOT immerse warmer
elements or any other part of this equipment

p. 4

in water. Doing so may damage equipment
and prevent it from working properly. Always
unplug equipment before cleaning or servicing
to prevent electric shock.

electrical requireMents

This product requires a properly-grounded 120 volt supply with
a 15 amp circuit, and uses a NEMA style 5/15 plug. (Standard
American plug) The Paragon Hot Dog Steamer has a current
draw of 10 amps or 1200 watts. (Export voltage is 230VAC).
Failure to wire properly will void the warranty and can result in
damage to the blower, heat element, lights etc.

We recommend your Paragon Hot Dog Steamer be plugged
directly into a dedicated outlet. Extension cords may create a
safety hazard and reduce its performance.

Be sure outlet accepts three (3) prong grounded plug. DO NOT
use a three (3) prong to two (2) prong adapter.

unPacking

Paragon carefully inspects each product during assembly
and after completion to adhere to strict quality guidelines,
and packs it securely to ensure safe delivery to each of our
customers. Be sure to carefully remove all packing material and
adhesive before any operation. Please examine your product
to guarantee all equipment has arrived, complete and in good
condition.

If you believe that any
damage may have occurred
during shipment or parts may
be missing, please contact
Paragon immediately for
replacement.

p. 5

OPerating instructiOns

1.

Always clean unit thoroughly before each use.

2.

Fill the water pan with water, up to 8 quarts. The warmer
the water, the faster the machine will heat up. For optimal
performance, we recommend distilled water.

3.

Insert Hotdog and bun trays and divider.

4.

Plug cord in and turn the POWER switch to ON.

5.

Turn heat control to “HIGH” position. This will turn on the
heating element in the base of the unit. The machine should
start producing steam. The indicated area on the dial is the
optimal setting.

6.

Place up to 45 hotdogs to begin with in the lower hotdog
compartment and steam. Please note: More hotdogs can be
added when unit is fully heated. BE SURE TO ARRANGE HOTDOGS
LOOSELY TO ALLOW THE STEAM TO CIRCULATE FREELY BETWEEN
EACH OF THEM. All meats should have an internal temperature of
140 degrees Fahrenheit (60 C) before serving.

7.

Once all hotdogs have reached serving temperature turn the
thermostat down to between 160�- 170� degrees F (71�-77� C)
to keep them warm. CAUTION: Use tongs to remove buns
and hotdogs from the steamer as the product will be hot to
the touch.

Place several buns in the top bun compartment. Place buns

8.
as needed. This is a highly efcient steam generator and
warmer. Leaving buns in too long will result in either soggy
or overcooked buns.

9.

If the low water Indicator light comes on, add up to 4 more
quarts of water to restart the heating element.

Steam is vaporized water… the visible white mist that is condensation as a result
of boiling water mixing with the cooler air. This mist does consist of tiny droplets
of liquid water. Please take this into consideration when placing the Dog Hut.
There will be condensation, drops of water and possible pooling of water in, on
and around the Dog Hut and the surface on which it is placed. Paragon cannot

be held responsible for any water damage resulting because of this.

p. 6

cleaning & Maintenance

It is recommended that the steamer be cleaned out daily using
suitable cleaners that may be used on food service equipment.

WARNING: To reduce electrical shock or injury always make
sure the machine is turned off and unplugged before cleaning.

• Empty the water pan using the quick turn water release
valve located on the side of the unit. The water can get greasy,
so it is essential that it be changed frequently. CAUTION: the
water will be hot!

• Carefully remove glass doors and all interior components.
(bun trays, hot dog trays and dividers) to clean the two rails
that support the bun trays, remove the fasteners and lift the
rails out.

• Wash all interior parts as well as hood and door and water
pan as necessary with soap and water.

• The stainless steel body of the steamer is easy to keep clean.
Usually a damp cloth will remove all dirt and grease spots.
NEVER USE ABRASIVES on the stainless steel body, or the vinyl
labels. Clean gently with soap and water.

• The glass should always be clean and sparkling. Remember
the inside of the glass must be cleaned too.

• Clean base of unit with damp cloth and dry. Use care
to avoid damaging the oat switch. See #17 in picture for
location of oat switch.

• Take special precautions when cleaning around electrical
switches on control panel. Use a damp cloth. NEVER spray or
allow any water to run near seams on control panel that may
allow circuits to be damp or wet inside of component box.
Use a damp sponge or cotton swab applicator to clean plastic
knobs.

NEVER use water on the electrical components in the base.

p. 7

cOntrOls anD tHeir FunctiOns

Variable Adjustable Thermostat:

Innite heat control. Controls the heavy duty submersible
heating element located in the base which controls the amount
of heat going to the water pan to generate steam.

Illuminated ON/OFF switch:

Gives you a positive indication that the machine is turned on.

Low Water Indicator Light:

The Dog Hut™ has an automatic shutoff feature when the
water level gets too low. When the Low water indicator light
turns on, the heating element will automatically shut off until
more water is added. The water reservoir holds a maximum of 8
quarts, but the low water light will come on when it gets down
to 4 quarts. We then recommend you add 4 more quarts to
return it to full capacity.

Quick Turn Water Release Valve:

Located on the side of the unit, it eliminates burnt ngers and
spilt water, as well as allowing for easier cleaning.

Paragon values your continued safety above all else. Please follow

these guidelines when using your equipment to prevent injury and

maximize product performance:

WARNING: Always turn the POWER switch to OFF when the
machine is not in use.

Do not operate with a damaged cord or plug or after the
machine malfunctions, has been dropped or damaged.

This application is not intended for use in wet location. Never
locate application where it may fall into a water container.

Do not insert or allow foreign objects to enter any ventilation
or exhaust opening as this may cause an electrical shock, re or
damage to the appliance.

p. 8

p. 9

A

B

C

D

18.86

SECTION B-B

SCALE 1 / 2

1

2

3

4

5

6

7

A

Parts List

12

13

9

10

A

8

B

12

13

C

D

8

A

C

14

C

7

13.43
9

SECTION A-A

6

SCALE 1 / 2

7

6

11

16

15

6

A

B B

5

5

15.75

4

5

4

SECTION B-B

1

3

7

18.96

8

2

3

2.30

10

SCALE 1 / 2

12

13

9

4

3

17

p. 10

DRAWN DATE

CHECKED

TOLERANCES

DECIMAL DIMENSION

ANGLE DIMENSION

2

PARAGON INTERNATIONA L INC.

D

1

1

OF

2

ANONE

FRACTION DIMENSION

DIVULGED WITHOUT PRIO R WRITTEN PERMISSION F ROM

INTERNATIONAL INC. IT I S A CONFIDENTIAL DOC UMENT

AND MUST NOT BE COPIE D, USED OR ITS CONTENTS

THIS DRAWING IS THE PROP ERTY OF PARAGON

LSX 2009-11-14

SCALE

± 1/32

± 1°

1:2

PARAGON

Professional Popcorn Equipment Nevada, Iowa 50201 USA

Title

FINISH SHEET

MATERIAL

HOTDOG STEAMER

SIZE

PART NUMBER

HDS_0030

REV

SECTION C-C

SCALE 1 / 2

± .010

Production Pilot Run

17

Concept

A

B

C

HDS_004116

17

HDS_004116

VALVE

FLOAT SWITCHHDS_0043

FLOAT SWITCHHDS_0043

2GLASS DOORHDS_002142GLASS HOLDERHDS_002252LOCK NUTHDS_00236

2HOTDOG TRAYHDS_00267

1BUN TRAYHDS_00278

1HEATING ELEMENTHDS_00289

1THERMOSTATHDS_003210

1KNOBHDS_003611

1PILOT LIGHTHDS_003712

1POWER SWITCHHDS_003813

1RELAYHD S_003914

1FRONT COVER WMTHD S_004015

1NIPPLE

1

1NIPPLE

1

1THERMOSTATHDS_003210

1KNOBHDS_003611

1PILOT LIGHTHDS_003712

1POWER SWITCHHDS_003813

1RELAYHDS_003914

1FRONT COVER WMTHDS_004015

2GLASS DOORHDS_002142GLASS HOLDERHDS_002252LOCK NUTHDS_00236

2HOTDOG TRAYHDS_00267

1BUN TRAYHDS_00278

1HEATING ELEMENTHDS_00289

D

2

GLASS - BACKHDS_001921CABINET WMTHDS_00203

GLASS - BACKHDS_001921CABINET WMTHDS_00203

Parts List

1

QTYTITLEPART NUMBERITEM

1BASE WELDMENTHDS_00101

1

QTYTITLEPART NUMBERITEM

1BASE WELDMENTHDS_00101

1