Paragon 3090010, 3080030, 3080010, 3070020, 3070510 User Manual

OWNER’S MANUAL

FOR PROFESSIONAL MACHINE CARTS AND STANDS

Model Numbers

SMALL CARTS MEDIUM CARTS LARGE CARTS

3080010 (Red) 3070010 (Red) 3090010 (Red) 3080020 (Black) 3070020 (Black) 3080030 (Sno-Cones) 3050010 (Sno-Cones) 3080510 (Stand) 3070510 (Stand)

Machine Carts and Stands

www.ManufacturedFun.com

Paragon International, Inc • 731 W. 18th Street • P.O. Box 560 • Nevada, IA 50201 USA

Phone [phone] • Toll-free [phone] • Fax [phone] • Email: [e-mail]

A506

INTRODUCTION

PARAGON IS PROUD TO BE YOUR

PARTNER FOR MANUFACTURED FUN.

Our goal is to provide you with the best solutions to attract customers, expand your business, and improve
your profits. That’s why this product has been specially-crafted to meet precise specifications for
performance, efficiency, and output.

Your Paragon Cart features:

• Chip resistant coating for long-lasting, attractive finish.

• Bright, colorful graphics for bringing in sales.

• Sturdy construction that withstands heavy commercial use.

• Convenient storage area for quick storage and retrieval of supplies.

• Large, spoked wheels for easy mobility.

• Collapsible construction that makes it simple to store or take on the road.

Your Paragon Stand features:

• Chip resistant coating for long-lasting, attractive finish.

• Bright, colorful graphics for bringing in sales.

• Sturdy construction that withstands heavy commercial use.

• Convenient storage area for quick storage and retrieval of supplies.

• Comes fully assembled for ease of use.

Should you have any questions about your equipment, or would like to know more about our other
innovative concession equipment and supplies, please contact us at 1-800-433-0333 or visit us on the
web at: Manufacturedfun.com

UNPACKING

Paragon carefully inspects each product during assembly and after completion to adhere to strict quality
guidelines, and packs it securely to ensure safe delivery to each of our customers. Be sure to carefully
remove all packing material and adhesive before any operation. Please examine your product to guarantee
all equipment has arrived, complete and in good condition.

If you believe that any damage may have occurred during shipment or parts may be missing, please
contact Paragon immediately for replacement.

Thank you for your purchase and enjoy!

2

SAFETY PRECAUTIONS

Paragon values your continued safety above all else. Please follow these guidelines when using your equipment to
prevent injury and maximize product performance:

All equipment is designed and sold for commercial use only. Equipment is not to be
used by the general public or intended for home use. No direct contact to equipment
by the general public should be allowed when used in food service locations. Only
trained personnel should operate this equipment.

Carefully read any and all instructions before beginning operation of the equipment.
Any alterations made to equipment by anyone other than certified Paragon personnel

will void warranty and may also create unsafe working conditions. NEVER make
alterations to the equipment.

ASSEMBLY INSTRUCTIONS

CART

1. Attach Handle to the cart body using four 1/4” - 20 x 3/4” bolts, flat washers,
lock washers and hex nuts.

2. Turn assembly over on its top.

3. Install Long Legs to the same side of the cart body that the handle is
attached to using four ¼” – 20 x 2” Screws, flat washers, lock washers, and
hex nuts.

4. Press End Caps into the protruding end of legs.

5. Attach Short legs to the opposite side of the cart body that the handle is
attached to using four ¼” – 20 x 2” Screws, flat washers, lock washers, and
hex nuts.

6. Slide axle rod through the holes in the Short Legs.

7. Slide a wheel over the axle rod on the outside of Short Legs. Put a Clip Pin
through the holes on each end to secure the wheels to the axle.

8. Turn assembly the correct side up and position the Cart Tray over the side of
the cart body opposite of the handle.

3