Paradyne MUM-2000, MUM2000-2 Installation Instructions Manual

MUM2000-2 Multiplexer Uplink Module

Installation Instructions

Document Number MUM2-A2-GZ40-00

September 2004

Contents

Software and Firmware License Agreement ...................................................... 1

Product Documentation Online .......................................................................... 3

Release Notes ................................................................................................... 3

Unpacking the MUM2000-2 ............................................................................... 3

Installing an Uplink Interface Module On the MUM2000-2 ................................ 4

Installing the MUM2000-2 in a BAC ................................................................... 5

Connecting the UIM to the Network ................................................................... 6

BAC Management ............................................................................................. 7

LED Indicators ................................................................................................... 8

Regulatory Compliance for Class A Equipment ................................................. 9

Warranty, Sales, Service, and Training Information ........................................... 10

Software and Firmware License Agreement

ONCE YOU HAVE READ THIS LICENSE AGREEMENT AND AGREE TO ITS
TERMS, YOU MAY USE THE SOFTWARE AND/OR FIRMWARE INCORPORATED
INTO THE PARADYNE PRODUCT. BY USING THE PARADYNE PRODUCT YOU
SHOW YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE AGREEMENT.

IN THE EVENT THAT YOU DO NOT AGREE WITH ANY OF THE TERMS OF THIS
LICENSE AGREEMENT, PROMPTLY RETURN THE UNUSED PRODUCT IN ITS
ORIGINAL PACKAGING AND YOUR SALES RECEIPT OR INVOICE TO THE
LOCATION WHERE YOU OBTAINED THE PARADYNE PRODUCT OR THE
LOCATION FROM WHICH IT WAS SHIPPED TO YOU, AS APPLICABLE, AND YOU
WILL RECEIVE A REFUND OR CREDIT FOR THE PARADYNE PRODUCT
PURCHASED BY YOU.

The terms and conditions of this License Agreement (the “Agreement”) will apply
to the software and/or firmware (individually or collectively the “Software”)
incorporated into the Paradyne product (the “Product”) purchased by you and any
derivatives obtained from the Software, including any copy of either. If you have
executed a separate written agreement covering the Software supplied to you
under this purchase, such separate written agreement shall govern.

Paradyne Corporation (“Paradyne”) grants to you, and you (“Licensee”) agree to
accept a personal, non-transferable, non-exclusive, right (without the right to
sublicense) to use the Software, solely as it is intended and solely as incorporated

MUM2-A2-GZ40-00 September 2004 1

in the Product purchased from Paradyne or its authorized distributor or reseller
under the following terms and conditions:

1. Ownership: The Software is the sole property of Paradyne and/or its licensors.
The Licensee acquires no title, right or interest in the Software other than the
license granted under this Agreement.

2. Licensee shall not use the Software in any country other than the country in
which the Product was rightfully purchased except upon prior written notice to
Paradyne and an agreement in writing to additional terms.

3. The Licensee shall not reverse engineer, decompile or disassemble the
Software in whole or in part.

4. The Licensee shall not copy the Software except for a single archival copy.

5. Except for the Product warranty contained in the manual, the Software is
provided “AS IS” and in its present state and condition and Paradyne makes
no other warranty whatsoever with respect to the Product purchased by you.
THIS AGREEMENT EXPRESSLY EXCLUDES ALL OTHER WARRANTIES,
WHETHER EXPRESS OR IMPLIED, OR ORAL OR WRITTEN, INCLUDING
WITHOUT LIMITATION:

a. Any warranty that the Software is error-free, will operate uninterrupted in

your operating environment, or is compatible with any equipment or
software configurations; and

b. ANY AND ALL IMPLIED WARRANTIES, INCLUDING WITHOUT

LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.

Some states or other jurisdictions do not allow the exclusion of implied
warranties on limitations on how long an implied warranty lasts, so the above
limitations may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights which vary from one state or jurisdiction to
another.

6. In no event will Paradyne be liable to Licensee for any consequential,
incidental, punitive or special damages, including any lost profits or lost
savings, loss of business information or business interruption or other
pecuniary loss arising out of the use or inability to use the Software, whether
based on contract, tort, warranty or other legal or equitable grounds, even if
Paradyne has been advised of the possibility of such damages, or for any
claim by any third party.

7. The rights granted under this Agreement may not be assigned, sublicensed or
otherwise transferred by the Licensee to any third party without the prior
written consent of Paradyne.

8. This Agreement and the license granted under this Agreement shall be
terminated in the event of breach by the Licensee of any provisions of this
Agreement.

9. Upon such termination, the Licensee shall refrain from any further use of the
Software and destroy the original and all copies of the Software in the
possession of Licensee together with all documentation and related materials.

10. This Agreement shall be governed by the laws of the State of Florida, without
regard to its provisions concerning conflicts of laws.

2 September 2004 MUM2-A2-GZ40-00

Product Documentation Online

Complete documentation for Paradyne products is available at
www.paradyne.com. Select Support → Technical Manuals.

To order a paper copy of a Paradyne document, or to speak with a sales
representative, please call 1-727-530-2000.

Release Notes

Release notes for this product are available in the subscriber firmware area of

www.paradyne.com. Select Support → Subscriber Firmware.

Always review the relevant release notes before installing a new card.

MUM2000-2 Overview

The MUM2000-2 Multiplexer Uplink Module provides gigabit Ethernet uplink
support capability and enhanced management functionality for the 4000, 4000E,
12000 and 12000E Ethernet-based Broadband Access Concentrators (BACs).

The MUM2000-2 has two modular Uplink Interface Module (UIM) slots, allowing
combinations of T1, E1, DS3, E3, 10/100BaseT, and gigabit Ethernet (1000BaseT
or fiber) uplinks.

The MUM2000-2 includes IP Multicast support that allows the BAC to deliver
broadcast television over high speed access lines (typically 10+ Mbps ADSL). This
IP Multicast support (including IGMP snooping) ensures that video traffic is
intelligently forwarded only to those modules and ports that are requesting the
particular video stream and protects other modules and ports from receiving
unwanted traffic.

The MUM2000-2 supports up to 384 DSL ports.

Unpacking the MUM2000-2

HANDLING PRECAUTIONS FOR

!

STATIC-SENSITIVE DEVICES

This product is designed to protect sensitive components from damage
due to electrostatic discharge (ESD) during normal operation. When
performing installation procedures, however, take proper static control
precautions to prevent damage to equipment. If you are not sure of the
proper static control precautions, contact your nearest sales or service
representative.

Unpack and Inspect the Multiplexer Uplink Module (MUM). If there is visible
damage, do not attempt to install the MUM2000-2; notify your sales or service
representative.

MUM2-A2-GZ40-00 September 2004 3