Paradox K636, ESPRIT E55 Reference Manual

K636 - User’s Quick Reference Guide

StayD Light (green)

On = StayD on
Off = St ayD off

Off Light (red)

On = Disarmed
Off = System armed

AC Light (orange)

On = Power on
Off = Power off

= Press once +

[

MASTER CODE] for Quick

Menu Programming.

Keys
[

TBL] Trouble display

On = Trouble(s) occurring

[

MEM] Alarm memory display

On = Alarm(s) occurred

[

BYP] Bypass programming

On = Zone(s) bypassed

[

ARM], [SLEEP], [STAY]:

On = System Armed
Off = Zone disarmed
Flash = Exit Delay
Fast = Exit Delay (final 10 sec.)
Flash* or zone in alarm

* Audible Indicators:

Continuous beep = Alarm
Variable beep = Fire alarm
Intermittent beep = Beginning of

exit delay

Fast beep = Final 10 sec. of

exit delay

Zone Display:

Key lit [1] to [0(10)]
correspond to zones 1 to
10 respectively.

Key Lit = Open or

Entry delay

Key Flash = In alarm or

Tamper

TO ARM

WHEN LEAVING...

TO ARM

WHEN STAYING...

KEYPAD OVERVIEW

To Regular Arm:

1. Close all opened zones.

2. Press [

3. Enter your [

ARM].

ACCESS CODE].

ARMING AND DISARMING

To Disarm: [OFF] + [ACCESS CODE]

To Stay Arm:

1. Press the [STAY] key.

2. Enter your [

To Sleep Arm:

1. Press the [SLEEP] key.

2. Enter your [

ACCESS CODE].

ACCESS CODE].

PANIC ALARMS

Printed in Canada 02/2008 PARADOX.COM K636-EQ00

ALARM MEMORY DISPLAY

To send an audible alarm to your Security
Company, press and hold one of the button
combinations listed for 3 seconds.

Panic Alarm Type Button

Combinations

Police
Medical
Fire

Press [1] & [3]
Press [4] & [6]
Press [7] & [9]

TROUBLE DISPLAY

When a trouble condition occurs, the [
key will illuminate.

1. Press the [

TBL] key. The key will flash

and number(s) corresponding to the
trouble(s) will illuminate.

2. Read the corresponding explanation
from the trouble list in the Esprit E55
User Guide.

3. Press the [

CLEAR] key to exit.

TBL]

To view the alarms that occurred during the
last armed period:

1. Disarm the system.

2. Press the [

MEM] key.

3. The corresponding zone numbers
that were in alarm the last time the
system was armed will illuminate.

4. Press the [

CLEAR] key to exit.

KEYPAD SETTINGS

To mute the keypad:

Press and hold the [
seconds to enable or disable Keypad
Muting.

To modify the backlight:

1. Press and hold the [
seconds.

2. The [

3. Press the [

MEM] key will illuminate.

MEM] key to set the desired

backlight level.

4. Press [

CLEAR] twice to exit.

CLEAR] key for 6

MEM] key for 3

BYPASS PROGRAMMING

Bypassed zones remained unarmed when
the system is armed.

1. Press the [

2. Enter your [

3. The corresponding key of all open
zones will illuminate. Select the
zone(s) you want to bypass by
entering the one-digit zone number.
The zone key will flash.

4. Press the [
exit.

BYP] key.

ACCESS CODE].

ENTER] key to save and

CHIME PROGRAMMING

A Chime Enabled zone will advise you every
time it is opened by causing your keypad to
beep.

1. Press & hold the corresponding zone
key for 3 seconds (Accept beep =
Chime enabled, Fail beep = Chime
disabled).

© Paradox Security Systems Ltd., 2008. Esprit
E55 is a trademark or registered trademark of
Paradox Security Systems Ltd. and its affiliates
in Canada, the United States and/or other
countries. All rights reserved.