Paradox DGP-641 User Quick Reference Manual

The LCD screen will
guide you through
the operations

Use arrow buttons to
scroll menu or choices

ON = AC power
OFF = Power failure

Green:

ON = Zones closed
OFF = Zone(s) open
FLASH = Exit Delay

Red:

ON = Area(s) armed
OFF = Area(s) disarmed
FLASH = Alarm

User’s Quick Reference Guide

“AC” LIGHT

“STATUS” LIGHT

STEP 1: Enter [ACCESS CODE]
STEP 2: Press
STEP 3: Press
STEP 4: Enter the 2-digit User

Number or scroll list,
and press

STEP 5: Enter new User Code

STEP 6: Program User Options from

Table 1 then press

STEP 7: Program Area Assignment

from Table 2 then press

In Steps 6 and 7:

When the number appears in the
brackets, the number is ON and
the feature or area is accessible.

Table 1: User Options

[1] ON [2] OFF : Master

Modifies User Codes only

[1] ON [2] ON: Full Master

Modifies User Codes, User
Options, and Area Assignment

[3] ON: Duress

Code used to send silent alarm
when forced to arm/disarm system

[4] ON: Bypass

Can use Bypass Programming

[5] ON: Arm only

Cannot disarm

[6] ON: Stay & Instant Arm

Can Stay or Instant Arm

[7] ON: Force Arm

Can Force Arm

[8] ON: Keypad obeys code

Keypad allows access to area(s)
assigned to code

[8] OFF : Code obeys keypad

Code only allowed access to
Keypad’s assigned area(s)

Table 2: Area Assignment

[1] ON: Access to Area 1
[2] ON: Access to Area 2
[3] ON: Access to Area 3
[4] ON: Access to Area 4
All OFF: Code controls PGM only

ACCESS CODES

To Stay Arm *

(Arms Area’s perimeter)

One-touch Button, [if enabled:

To Force Arm*

(Arms Area without waiting for all
zones to close)

One-touch Button, [if enabled:

To Regular Arm*

(Arms entire Area)

One-touch Button, [if enabled:

To Instant Arm *

(Stay Arms Area, but if any zones are
breached, it will instantly cause an alarm)

One-touch Button, [if enabled:

To Disarm(when entering)
Enter [ACCESS CODE]

To Disarm (from within perimeter)
Enter [ACCESS CODE] and press *

To arm

when leaving:

To arm

when staying:

Enter [ACCESS CODE] then press:

ARMING AND DISARMING

*Then choose an area to arm or disarm if necessary

DGP-641

PRINTED IN CANADA 10/99 K641EQ-01

Security Company:
( )

Enter the zone number
or scroll the list and press
when the desired zone
appears on the screen.

OR

Your installer can program the system
to have up to four separate areas.

To view or choose area,press & hold:
Area 1:
Area 2:

Area 3:
Area 4:

Made a mistake?

Press
To erase entry or revert to last step

Normal Mode

Shows the time, date, and scrolling
messages.

Confidential Mode

Shows “Confidential”, date & time
only. Press button or enter code to
return to Normal Mode.

To view the alarms that occurred last
armed period.

Press

ALARM MEMORY DISPLAY

Press and hold a button without
entering your Access Code.

Available for the arming features,
disarming, Bypass Programming,
Event Record display, and the
keypad settings. Each One-touch
Button must be enabled by the
installer.

ONE-TOUCH BUTTONS

All zones that were breached
during the last armed period will
scroll on the screen.

1)

2) Press

Bypassed zones remain unarmed
when the area is armed.

One-touch Button, [if enabled:

Press

Press for Bypass Recall

then choose one:

3)

2)

BYPASS PROGRAMMING

Press

1) Enter [ACCESS CODE]

Keypad beeps when the zone opens.

to select the zones:

Press

Press

Press

to program time period:

A) Enter the time you want to

enable all the Chimed zones.
(HH:MM)

B) Enter the time you want to

disable all the Chimed zones.
(HH:MM)

2)

CHIME PROGRAMMING

1) Enter [ACCESS CODE]

To re-bypass the zones bypassed
during last armed period.

In Step 2 of Bypass or Chime Programming, re-enter the zone number to
disable the feature.

Enter the zone number
or scroll the list and press
when the desired zone
appears on the screen.

OR

then choose one:

3)

Press

PARTITIONED SYSTEM

EVENT RECORD DISPLAY

The Event Record Display will keep
in memory the user-initiated actions,
the alarms, and the troubles that
have occurred in your system. You
can only view the events that
occurred in the areas assigned to
your Access Code.

One-touch Button, [if enabled:

1) Enter your [ACCESS CODE]

2) Press

3) To view events press:

4) Use

5) Press

for all areas OR
Choose specific area by pressing
its corresponding button.

to view subsequent events

to exit

KEYPAD SETTINGS

You can modify the keypad’s settings
to suit your needs.

1) Press and hold

2) Choose one. Press:

3) Press

4) Press

5) Press

Scroll Speed: time between
messages (10 is slowest)

Backlight: keypad’s light
(7 is brightest)

Contrast: character intensity
(4 is strongest)

or to modify

to save

to exit

for next setting or

to exit