ParaBody 855103 User Manual

Serious

855103 AB CRUNCH BIENCH

ASSEMBLY INSTRUCTIONS

Part # 6797701

1

Revision: 01/24/00

WELCOME TO THE WORLD OF ~,~i~,t’$: ,.

Please note:- ~,~

. * Thank you for purchasing the Parabody 855103 AB CRUNCHBEN~H,:!..=~,..,.::,

....

Please ....... read thege instructions thoroughly and keep them f0~~ ~"futUre reference: :~~ ~"~"’ ’-’ : ~ ~ ...... This " product

must be assembled on a flat, level surface to asSure its prop~:~t{;h.’~"~:~"

¯

We recommend cleaning your product (pads and flame) on a regular basis, using warm soapy

water. Touch-up paint can be purchased fi:om your Parabody customer service representative

at [phone].

There is a risk assumed by individuals who use this ~ype of equipment. To minimize risk, please
follow these rules:

1. Inspect equipment daily. Tighten all loose connections and replace worn parts immediately.
Failure to do so may result in serious injury.

2. Do not allow minors or children to play on or around this equipment.

3. Exercise with care to avoid injury.

4. If unsure of proper use of equipment, call your local Parabody distributor or call the
Parabody customer service department at [phone].

I"Tools Required for Assembly[

* 9/16" wrench

*

Ratchet with 9/16" socket
Adjustable wrench

*

* Tape measure

Bolt Length Ruler I

NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE Ol~ THE HEAD OF THE BOLT.

BOLT LENGTH RULER:

BOLT LENGTH

1/2 [ 1/2 [ 1/2 [ 1/2 ~ 1/2 I 1/2 [

1 2 3 4 5 6