ParaBody 441101440 User Manual
441101 440 LEG PRESS ADAPTER KIT
WARNING:
Read and follow all directions
for each step to insure proper
assembly of this product.
ASSEMBLY INSTRUCTIONS
Part # 7039101
REV . B
Revision: 07/19/011
IMPORTANT NOTES
There is a risk assumed by individuals who use this type of equipment. To minimize risk, please
follow these rules:
1. Consult your physician before beginning any exercise program.
2. Inspect equipment daily. Tighten all loose connections and replace worn parts immediately.
Failure to do so may result in serious injury.
3. Do not allow minors or children to play on or around this equipment.
4. Exercise with care to avoid injury.
5. If unsure of proper use of equipment, call your local Parabody distributor or call the
Parabody customer service department at (800) 328-9714.
Please note:
* Thank you for purchasing the Parabody 441 101 Leg Press Adapter Kit. Please read these
instructions thoroughly and keep them for future reference. This product must be assembled
on a flat, level surface to assure its proper function.
* We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy
water. Touch-up paint can be purchased from your Parabody customer service representative
at (800) 328-9714.
Tools Required for Assembly
* Rubber mallet or hammer
* 3/4” wrench
* 9/16” wrench
* Ratchet with 3/4” and 9/16” sockets
* 5/32” Allen wrench
* Adjustable wrench
* Tape measure
Bolt Length Ruler
NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT.
BOLT LENGTH
BOLT LENGTH RULER:
1/2 1/2 1/2 1/2 1/2 1/2
0
1
2
345
2
6
PARTS LIST
KEY
STEP 1
• Slide two COVER CAPS (7) over the FRONT LEG (1)
PART #
6686608
1
6693902
2
6694002
3
6694208
4
3116201
5
6405201
6
6467001
7
3108102
8
6140701
9
NOTE: The LEG PRESS ATTACHTMENT (100101) must be assembled before connecting it to the
as shown in FIGURE 1
DESCRIPTION
FRONT LEG
PULLEY BRACKET
CABLE SWIVEL
BASE CONNECTION
3-1/2” PULLEY
2” SQ. END CAP
COVER CAP
QUICK DISCONNECT LINK
GLIDE 1 X 1”
PARABODY 440 HOME GYM
QTY
1
1
1
1
2
1
2
1
2
7
KEY
10
11
12
13
14
15
16
17
PART #
3102501
3102802
3102801
3102924
3102904
3102918
7032303
6694401
1
DESCRIPTION
3/8” WASHER
3/8” LOCKNUT
1/2” LOCKNUT
3/8 X 1-3/4” BOLT
3/8 X 3” BOLT
1/2 X 3-1/4” BOLT
110-3/4” CABLE ASSY
82-1/2” CABLE ASSY
QTY
4
5
2
3
2
2
1
1
FIGURE 1
STEP 2
• Slide one 2” SQ. END CAP (6) into the BASE CONNECTION (4)
4
6
FIGURE 2
STEP 3
• Attach two 1 X 1” GLIDES (9) to the top of PULLEY BRACKET
(2) as shown in FIGURE 3.
as shown in FIGURE 2.
9
2
FIGURE 3
3
Loading...