PANJIT 1S6, 1S5, 1S8, 1S4, 1S3 Datasheet

...

1S2 THRU 1S10

FEATURE

MECHANICAL DATA

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTIC

1S81S10

R-1

1 AMPERE SCHOTTKY BARRIER RECTIFIERS

VOLTAGE - 20 to 100 Volts CURRENT - 1.0 Ampere

Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound

l 1 ampere operation at TA=75 ¢J with no thermal runaway

Exceeds environmental standards of MIL-S-19500/228

For use in low voltage, high frequency inverters free wheeling, and

polarlity protection applications

Case: Molded plastic, R-1 Terminals: Axial leads, solderable per MIL-STD-202, Method 208 Polarity: Color band denotes cathode Mounting Position: Any Weight: 0.0064 ounce, 0.181 gram

Ratings at 25¢J ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.

1S2 1S3 1S4 1S5 1S6 Maximum Recurrent Peak Reverse Voltage 20 30 40 50 60 80 100 V Maximum RMS Voltage 14 21 26 35 42 56 80 V Maximum DC Blocking Voltage 20 30 40 50 60 80 100 V Maximum Forward Voltage at 1.0A 0.50 0.70 0.85 V Maximum Average Forward Rectified Current .375” Lead Length at TA=75 ¢J

Peak Forward Surge Current I

8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Full Load Reverse Current, Full Cycle Average at TA=75 ¢J

Maximum Reverse Current TA=25 at Rated Reverse Voltage TA=100¢J Typical Junction capacitance (Note 1) 110 Typical Thermal Resistance £KJA (Note 2) 80 ¢J/W Operating and Storage Temperature Range -50 TO +125 ¢J

NOTES:

1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC

2. Thermal Resistance Junction to Ambient

* JECED Registered Value

(surge)

¢J

1.0 A

30 A

30 mA

0.5

10.0

UNITS

RATING AND CHARACTERISTIC CURVES

LEAD TEMPERATURE, ¢J

INSTANTANEOUS FORWARD VOLTAGE, VOLTS

NUMBER OF CYCLES AT 60H

REVERSE VOLTAGE ,VOLT

1S2 THRU 1S10

20 10

1.0

0.75

0.50

AMPERES

ERAGE FORWARD CURRENT

SINELE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD .375" 9.5mm LEAD

0.25

LENGTHS

0 20 40 60 80 100 120

1.0

CURRENT AMPERES

INSTANTANEOUS FORWARD

0.1

1S2

1S10

1S5 ~ 1S6

TJ = 25

¢J

PULSE WIDTH = 300£gs 1% DUTY CYCLE

.2 .4 .6 .7 .9 1.1 1.3 1.5 1.7 1.9

Fig. 1-FORWARD CURRENT DERATING CURVEE Fig. 2-TYPICAL INSTANTANEOUS FORWARD

CHARACTERISTICS

ORWARD CURGE CURRENT,

MPERES pK (HALE SINE SAVE)

1 2 4 6 8 10

60 80 100

Fig. 3-MAXIMUM NON-REPETITIVE SURGE CURRENT

400

200

TJ = 25

100 80 60 40

CAPACTANCE, pF

20 10

0.1 0.4 1.0 4 10 40 60 100

¢J

Fig. 4-TYPICAL JUNCTION CAPACITANCE