PANJIT 1F7G, 1F6G, 1F5G, 1F4G, 1F3G Datasheet
...
FEATURES
1F1G THRU 1F7G
GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER
VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Amperes
z Plastic package has Underwriters Laboratory
Flammability Classification 94V-O Utilizing
Flame Retardant Epoxy Molding Compound
z Glass passivated junction
z 1.0 ampere operation at T
=55℃ with no thermal runaway
A
z Exceeds environmental standards of MIL-S-19500/228
z Fast switching for high efficiency
MECHANICAL DATA
Case: Molded plastic, R-1
Terminals: Plated axial leads, solderable per MIL-STD-202,
Method 208
Polarity: Color band denotes cathode
Mounting Position: Any
Weight: 0.0064 ounce, 0.181 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
R-1
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V
Maximum RMS Voltage 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified Current .375"(9.5mm) lead
length at T
Peak Forward Surge Current 8.3ms single half sine wave
superimposed on rated load(JECEC method)
Maximum Forward Voltage at 1.0A 1.3 V
Maximum Full Load Reverse Current Full Cycle
Average, .375”,9.5mm Lead Length at T
Maximum DC Reverse Current
at Rated DC Blocking Voltage T
Maximum Reverse Recovery Time(Note 1) 150 150 150 150 250 500 500 ns
Typical Junction capacitance (Note 2) 15
Typical Thermal Resistance (Note 3) RΘJA
Operating and Storage Temperature Range T
=55℃
A
=100℃
A
=55℃
A
J
1F1G 1F2G 1F3G 1F4G 1F5G 1F6G 1F7G UNITS
1.0 A
30 A
10.0
150
67
-55 to +150
μA
μA
P
℃/W
℃
NOTES:
1. Measured with I
=.5A, IR=1A, Irr=.25A
F
2. Measured at 1 MHz and applied reverse voltage of 4.0 VDC
F
3. Thermal resistance from junction to ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.B.
mounted with 0.22×0.22"(5.5×5.5mm) copper pads
RATING AND CHARACTERISTIC CURVES
1F1G THRU 1F7G
Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM
Fig. 2-TYPICAL INSTANTANEOUS Fig. 3-FORWARD CURRENT DERATING CURVE
FORWARD CHARACTERISTICS
Fig. 4-TYPICAL JUNCTION CAPACITANCE Fig. 5-PEAK FORWARD SURGE CURRENT
Loading...