Panasonic of North America 9TAK SMS19 User Manual

Confidential

Media Station

for

Specifications

(Detail Design Phase)

Audio Enhancement

Approval

Panasonic

Approval

Ver.1.3

November 20, 2019

Panasonic Corporation

Confidential

■ INDEX

1. GENERAL ........................................................................................................	4
2. FEATURES ......................................................................................................	4
3. SPECIFICATIONS............................................................................................	4
3.1. CONTROLS and INDICATIONS.......................................................................................	4
3.2. SPECIFICATIONS............................................................................................................	4
4. BLOCK DIAGRAM............................................................................................	6
5. APPEARANCE.................................................................................................	7
6. PACKAGING SPECIFICATIONS OF DECT BOARD.......................................	8
6.1. Packaging Specifications..................................................................................................	8
6.2. Outer Box Layout of DECT board.....................................................................................	9
7. CIRCUIT PROTECTION...................................................................................	10
7.1. Countermeasure of short circuit........................................................................................	10
7.2. Countermeasure of ESD (Electro Static Discharge).........................................................	11
8. AUDIO BLOCK.................................................................................................	12
8.1. Power supply and GND of audio block.............................................................................	12
8.2. Countermeasure of pop noise ..........................................................................................	13
9. STRUCTURE ...................................................................................................	14
9.1. Position of parts of DECT board K-SMS19 ....................................................................	14
9.2. Connector .........................................................................................................................	15
9.3. Fastening torque...............................................................................................................	19
9.4. Label of DECT board........................................................................................................	19
9.5. Material of case.................................................................................................................	20
10. INSTALLATION..............................................................................................	21
11. IN CHARGE OF RELIABILITY TEST .............................................................	22
12. FCC AND INDUSTRY CANADA REQUIREMENTS REGARDING THE END
PRODUCT............................................................................................................	23
12.1. List of applicable FCC and IC rules ................................................................................	23
12.2.	...................... 23
12.3. IC rules .............................	23
12.4. Requirement of regarding the end product and manual.................................................	23
12.5. Notice..............................................................................................................................	24

-2-

No. Ver. Date

1 1.0

21.1

Revision

First draft

Modification

Dimensions and Weight (Section 3.2.1) Startup time (Section 3.2.5)

Inrush current (Section 7.1)

Outer Box Layout of DECT board (Section 6.2) Countermeasure of pop noise (Section 8.2) Position of parts of DECT board (Section 9.1) Label of DECT board (Section 9.4)

In charge of reliability test (Section 11)

	Change	Sign	Check
	time
	17/DEC/	K.Kondo	-
	2018

	4/OCT/	K.Kondo	-
	2019

Addition

Dimension of cable (Section 9.2.5) Modification

PACKAGING SPECIFICATIONS OF DECT BOARD (Section 6)

Fastening torque (Section 9.3)

1.2Label of DECT board (Section 9.4)

3Addition

FCC AND INDUSTRY CANADA REQUIREMENTS REGARDING THE END PRODUCT (Section 12)

Modification

1.2a Outer Box Layout of DECT board (Section 6.2) (Dimensions and Weight)

Modification

41.3 FCC AND INDUSTRY CANADA REQUIREMENTS REGARDING THE END PRODUCT (Section 12)

12/NOV/	K.Kondo	-
2019

12/NOV/	K.Kondo	-
2019

20/NOV/

2019 K.Kondo -

-3-

1.GENERAL

These specifications describe the preliminary specifications of “Media Station” for Audio Enhancement (AE).

In charge of design
Panasonic	:	DECT board (digital block)
AE	:	Rear and Front panel (analog block), case

2.FEATURES

Media Station has 4-inputs and 2-outputs.

AUDIO Input terminal is available to connect to a headphone output of a MP3 player, or computer and so on.AUDIO Output terminal is available to connect to a recording and ALD (Assistive Listening Device).

Each audio input and output has volume control.Audio input has tone control.

Remote volume control functions are available; own volume level control or other volume level control, and LINE master volume level control (same as K-STD14).

3.SPECIFICATIONS

3.1.CONTROLS and INDICATIONS

Power Switch	:	Control Power ON/OFF
Volume Switches	: Control volume level of OWN, OTHER and LINE
E1 Switch	:	E1 output control
E2 Switch	:	E2 output control
LINK Switch	:	Registration control
Audio Input Volume knobs	: Control volume level of each Audio Input
Audio Output Volume knobs	:	Control volume level of each Audio Output
Tone Control knob	: Tone control of Audio Input
LED Indication	: Power LED (green) and LINK LEDs (green/red)
	Refer to “AE DECT Microphone System CD Specification” section 2.8.2.

3.2.SPECIFICATIONS

3.2.1.General Specifications

Power Supply	: USB Power (AC adaptor)
		Micro USB type B connector, DC5V±0.25V
Power Consumption	:	Ave 100mA (T.B.D)
		Peak 250mA (T.B.D)
		Note) Please use a power supply of 5 V, 250 mA or more
Dimensions	:	Media Station
		7.6”(W) x 5”(D) x 1.13”(H) (193.04 x 127 x 28.7 mm), designed by AE
		DECT board
		2.36”(W) x 2.36”(D) x 0.35”(H) (60 x 60 x 8.9 mm), including antenna
		2.60”(W) x 2.86”(D) x 0.35”(H) (66 x 73 x 8.9 mm), including antenna
Weight	:	Media Station
		9.6 oz (272.16g), designed by AE
		DECT board
	About 0.6 oz 0.7 oz (17g 20g) , including cables, antenna and shield case

-4-

Temperature Range	:	5 C ~ +35 C
Humidity Range	:	~90%
The Condition of Installation	:	Indoor use

3.2.2.Accessory of Media Station

AC adaptor	:	Prepared by Audio Enhancement
USBMicro USB Cable	: Prepared by Audio Enhancement
Operating Instructions	:	Prepared by Audio Enhancement
Warranty Card	:	Prepared by Audio Enhancement

3.2.3.RF Specification

Antenna	: The number of antenna: 2
		Antenna type: Dipole. Plate and pattern antenna
		Frequency range: 1,920 – 1,930(MHz)
		Antenna Gain: -7dBi(as human body effect)
RF specification	:	Specified in “AE DECT Mic Specification ”
Cover area	:	Same as K-STD14

3.2.4.Audio Specification

Frequency Response	:	100Hz~7kHz
Audio Input
Number of inputs	:	4
		φ3.5 Mini Jack, Unbalanced
Nominal Input Level	:	-24dBV (Media Station)
		-21dBV (DECT board)
Maximum Input Level	:	-5dBV (Media Station)
		-2dBV (DECT board)
Tone Control	: Bass/Treble tone control (Designed by AE)
ALC (Auto Level Control)	: DECT board does not have ALC.
		If you need the countermeasure of excessive input, please install ALC
		on the rear panel.
Audio Output
Number of outputs	:	2
		φ3.5 Mini Jack, Unbalanced
Nominal output Level	: -10dBV (Media Station) (Designed by AE)
		-21dBV (DECT board)
Maximum Output Level	:	0dBV (Media Station)
		-4dBV (DECT board)
3.2.5.Startup time
Startup time from pressing the Power SW to the audio link			: T.B.D Mimimum 5s

-5-

4.BLOCK DIAGRAM

-6-

5.APPEARANCE

Image of appearance (case is designed by AE) Front

Rear

-7-

6.PACKAGING SPECIFICATIONS OF DECT BOARD

6.1.Packaging Specifications

DECT board(K-SMS19) Packing Image

Label

Serial Label

Barcode Label

Partition

Packing Case

FCC Compliance Label

Packing Label

-8-