Panasonic WV-NP240 User Manual

Network camera
Operating Instructions
WV-NP240
Model Nos. WV-NP244
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
No model number suffix is shown in this manual.
W
V
-N
P
2
4
4
(Lens is option.)
WV-NP244 is shown above.
2
Wij verklaren als enige aansprakelijke, dat het product waarop deze verklaring betrekking heeft, voldoet aan de volgende normen of andere normatieve documenten, overeenkomstig de bepalingen van Richtlijnen 73/23/EEC en 89/336/EEC.
Vi erklærer os eneansvarlige for, at dette produkt, som denne deklaration omhandler, er i overensstemmelse med standarder eller andre normative dokumenter i følge bestemmelserne i direktivene 73/23/EEC og 89/336/EEC.
Vi deklarerar härmed värt fulla ansvar för att den produkt till vilken denna deklaration hänvisar är i överensstämmelse med standarddokument, eller andra normativa dokument som framställs i EEC-direktiv nr. 73/23 och 89/336.
Ilmoitamme yksinomaisella vastuullamme, että tuote, jota tämä ilmoitus koskee, noudattaa seuraavia standardeja tai muita ohjeellisia asiakirjoja, jotka noudattavat direktiivien 73/23/EEC ja 89/336/EE. säädöksiä.
Vi erklærer oss alene ansvarlige for at produktet som denne erklæringen gjelder for, er i overensstemmelse med følgende normer eller andre normgivende dokumenter som følger bestemmelsene i direktivene 73/23/EEC og 89/336/EEC.
We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directives EEC/73/23 and EEC/89/336.
Nosotros declaramos bajo nuestra única responsabilidad que el producto a que hace referencia esta declaración está conforme con las normas u otros documentos normativos siguiendo las estipulaciones de las directivas CEE/73/23 y CEE/89/336.
Noi dichiariamo sotto nostra esclusiva responsabilità che il prodotto a cui si riferisce la presente dichiarazione risulta conforme ai seguenti standard o altri documenti normativi conformi alle disposizioni delle direttive CEE/73/23 e CEE/89/336.
Wir erklären in alleiniger Verantwortung, daß das Produkt, auf das sich diese Erklärung bezieht, mit der folgenden Normen oder normativen Dokumenten übereinstimmt. Gemäß den Bestimmungen der Richtlinie 73/23/EEC und 89/336/EEC.
Nous déclarons sous note seule responsabilité que le produit auquel se réfère la présente déclaration est conforme aux normes ou autres documents normatifs conformément aux dispositions des directives CEE/73/23 et CEE/89/336.
Power disconnection. Unit with or without ON-OFF switches have power supplied to the unit whenev­er the power cord is inserted into the power source; however, the unit is operational only when the ON-OFF switch is in the ON posi­tion. The power cord is the main power disconnect for all units.
The lightning flash with arrowhead symbol, within an equilateral trian­gle, is intended to alert the user to the presence of uninsulated "dan­gerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The serial number of this product may be found on the surface of the unit. You should note the serial number of this unit in the space provided and retain this instruction as a per­manent record of your purchase to aid identification in the event of theft.
Model No. Serial No.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVIC-
ING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and mainte­nance (servicing) instructions in the literature accompanying the appli­ance.
FOR YOUR SAFETY PLEASE READ THE FOLLOW­ING TEXT CAREFULLY.
WARNING: This apparatus must be earthed.
IMPORTANT
The wires in this mains lead are coloured in accor­dance with the following code.
Green-and-yellow: Earth Blue: Neutral Brown: Live
As the colours of the wire in the mains lead of this appliance may not correspond with the coloured mark­ings identifying the terminals in your plug, proceed as follows.
The wire which is coloured
green-and-yellow must be connected to the terminal in the plug which is marked with the letter
E or by the earth symbol I or
coloured
green or green-and-yellow.
The wire which is coloured
blue must be connect­ed to the terminal in the plug which is marked with the letter
N or coloured black.
The wire which is coloured
brown must be con­nected to the terminal in the plug which is marked with the letter
L or coloured red.
WARNING:
• This apparatus must be earthed.
• Apparatus shall be connected to a mains socket out­let with a protective earthing connection.
• The mains plug or an appliance coupler shall remain readily operable.
• To prevent fire or electric shock hazard, do not expose this apparatus to rain or moisture.
• The apparatus should not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, should be placed on the apparatus.
• All work related to the installation of this product should be made by qualified service personnel or system installers.
3
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
S3125A
4
Limitation of Liability
THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WAR­RANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY’S RIGHT.
Disclaimer of Warranty
IN NO EVENT SHALL MATSUSHITA ELEC­TRIC INDUSTRIAL CO., LTD. BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTE­NANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:
(1) ANY DAMAGE AND LOSS, INCLUDING
WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;
(2) PERSONAL INJURY OR ANY DAMAGE
CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE USER;
(3) UNAUTHORIZED DISASSEMBLE, REPAIR
OR MODIFICATION OF THE PRODUCT BY THE USER;
(4) ANY PROBLEM, CONSEQUENTIAL
INCONVENIENCE, OR LOSS OR DAM­AGE, ARISING OUT OF THE SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY;
(5) ANY CLAIM OR ACTION FOR DAM-
AGES, BROUGHT BY ANY PERSON OR ORGANIZATION BEING A PHOTO­GENIC SUBJECT, DUE TO VIOLATION OF PRIVACY WITH THE RESULT OF THAT SURVEILLANCE-CAMERA’S PIC­TURE, INCLUDING SAVED DATA, FOR SOME REASON, BECOMES PUBLIC OR IS USED FOR THE PURPOSE OTHER THAN SURVEILLANCE;
(6) ANY PROBLEM, CONSEQUENTIAL
INCONVENIENCE, ANY LOSS OR DAM­AGE, ARISING OUT OF THE IMPROPER DETECTION OR SLIP-UP IN DETECTION BY VMD (Video Motion Detector) FUNC­TION OF THE PRODUCT.
THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPO­GRAPHICAL ERRORS. CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRE­SPONDING PRODUCT (S).
5
Preface
The network camera WV-NP240/WV-NP244 is designed to operate using a PC on a network (10BASE-T/100BASE-TX) to monitor images. By connecting to a network (LAN) or the Internet, images and audio from the camera can be monitored on a PC via a network.
*1
Features
• Video signals captured by the progressive CCD (Charge-Coupled Device) will be convert­ed into JPEG or MPEG-4 streams, and they can be monitored at up to 30 fps (VGA resolu­tion).
• Audio captured by the built-in microphone can be monitored using a PC via a network.
• When connecting with a PoE (Power over Ethernet, IEEE802.3af compliant) device, power will be supplied by simply connecting a LAN cable. This achieves reduction of installation time including wiring work due to this wire-saving capability.
• 1/3 inch progressive CCD solid-state image sensor with VGA resolution (640 x 480 pixels) achieves high-fidelity motion image scanning with high-resolution.
• The motion detection function that detects a motion in a designated surveillance area and issue an alarm signal is featured.
*2
• The FTP backup function and recording of each log on an optional SD memory card are available using the featured SD memory card slot.
*3
*1
It is necessary to configure the network settings of the PC and its network environment to monitor images and audio from the camera on the PC. It is also necessary that a web browser is installed on the PC.
*2
The motion detection function is not the dedicated function to prevent thefts, fires, etc..We assume no responsibility whatsoever for any damages resulting from the use of the motion detection function.
*3
Performance with this camera has been checked by using Panasonic’s SD memory cards (64 MB, 128 MB, 256 MB, 512 MB and 1 GB). If another SD memory card is used, this camera may not operate properly.
6
Trademarks and Registered Trademarks
• Microsoft, Windows and Windows XP are registered trademarks of Microsoft Cor­poration in the U.S. and/or other coun­tries.
• Intel is a registered trademark and Pentium is a trademark of Intel Corpo­ration or its subsidiaries in the United States and other countries (regions).
• Adobe, Adobe logos, and Acrobat are registered trademarks of Adobe Systems Incorporated in the U.S. and/ or other countries.
• Other names of companies and products contained in these operating instructions may be trademarks or registered trade­marks of their respective owners.
About these Operating Instructions
There are 2 sets of operating instructions for the WV-NP240/WV-NP244 as follows.
• Operating Instructions (book, these operating instructions)
• Network Operating Instructions (PDF) These "Operating Instructions" contain descriptions of how to install and connect this camera, and how to perform the required network settings. Refer to the "Network Operating Instructions (PDF)" on the provided CD-ROM for descriptions of how to perform the camera settings and how to operate this camera. Adobe
®
Reader is
required to read PDF.
System Requirements for a PC
OS (English version): Microsoft®Windows®2000 SP4, Microsoft®Windows®XP Home
Edition SP2, Microsoft
®
Windows®XP Professional Edition SP2 Computer: IBM PC/AT Compatible CPU: Pentium
®
4 2.4GHz or faster Memory: 512 MB or more Monitor: 1024 x 768 pixels or more, 24-bit True colour or better Network Interface: 10/100Mbps Network interface card must be installed Web Browser: Microsoft
®
Internet Explorer 6.0 SP2
CD-ROM Drive: It is necessary to read the operating instructions on the provided CD-
ROM.
Adobe
®
Reader®: It is necessary to read the operating instructions on the provided CD-
ROM.
* Audio will not be heard if a sound card is not installed on a PC. Audio may be interrupted
depending on the network environment.
7
CONTENTS
Important Safety Instructions ..................................................................................................... 3
Limitation of Liability ................................................................................................................... 4
Disclaimer of Warranty ...............................................................................................................
4
Preface ....................................................................................................................................... 5
Features ..................................................................................................................................... 5
About these Operating Instructions ............................................................................................ 6
System Requirements for a PC .................................................................................................. 6
Trademarks and Registered Trademarks .................................................................................. 6
Precautions ................................................................................................................................ 8
Major Operating Controls and Their Functions .......................................................................... 10
Lens Mounting ............................................................................................................................ 12
Optional lens ............................................................................................................................ 12
Focus adjustment .................................................................................................................... 12
How to use a vari-focal lens ..................................................................................................... 13
How to use a fixed-focal lens ................................................................................................... 13
Installations/Connections ........................................................................................................... 14
[Connection example] .............................................................................................................. 17
Insert/Remove SD Memory Card ............................................................................................... 18
How to insert an SD memory card ........................................................................................... 18
How to remove the SD memory card ....................................................................................... 18
Performing the Network Settings ............................................................................................... 19
Install the software ................................................................................................................... 19
Configure the network settings of the camera using the Panasonic IP setting software ......... 19
Troubleshooting ......................................................................................................................... 21
Specifications ............................................................................................................................. 22
Standard Accessories ................................................................................................................ 24
8
Precautions
Refer to all work related to the installation of this product to qualified service person­nel or system installer.
Do not attempt to disassemble the prod­uct.
There are no serviceable parts inside. Contact the qualified service personnel for maintenance.
Use this appliance for indoor use only.
Do not expose the appliance to direct sun­light for hours and do not install the product near a heater or an air conditioner. Otherwise, it may cause deformation, discol­oration and malfunction. Keep the appliance away from water and moisture.
To keep on using with stable performance
• Parts of this product may deteriorate and it may shorten lifetime of this product when using in locations subject to high temperatures and high humidity. Do not expose the product to direct heat such from a heater.
• Use the appliance at temperature within +5 °C - +35 °C (41 °F - 95 °F) and humidity below 90 %. (when using the appliance without turning the power off)
Handle the appliance with care.
Do not strike or shake, as this may damage the appliance. It may cause a malfunction.
About the PC monitor
When displaying the same image on the PC monitor at length, the PC monitor may be damaged. It is recommended to use a screen-saver.
When an error is detected, the camera will restart automatically.
This camera will restart when detecting an error caused by any reason. The camera will be inoperable for around 30 seconds after
the restart just as when the power is turned on.
Cleaning the camera body
Turn the power off when cleaning of the cam­era. Use a dry cloth to clean the camera. When the dirt is hard to remove, use a mild detergent and wipe gently. Then, wipe with a dry cloth.
Do not use strong abrasive detergent when cleaning the camera body. Otherwise, it may cause discoloration.
When using a chemical cloth for cleaning, read the caution provided with the chemical cloth product.
Cleaning the lens
Use a lens cleaning paper (used to clean camera lenses or lenses of spectacles). When using solvent, use an alcohols solvent. Do not use a thinner or a glass cleaner.
SD memory card
• When insert an SD memory card into the SD memory card slot, turn the power of the camera off. Otherwise, it may cause malfunction or damage data recorded on the SD memory card. Refer to page 18 for descriptions of how to insert/remove an SD memory card.
• When using an unformatted SD memory card, format it using this camera. Recorded data on the SD memory card will be deleted when formatted. If using an unformatted SD memory card or using an SD card formatted with other device, the camera may not work proper­ly or performance deterioration may be caused. Refer to the Network Operating Instruc­tions (PDF) for descriptions of how to for­mat an SD memory card.
• It is recommended to use Panasonic’s SD memory card.
Loading...
+ 16 hidden pages