Panasonic WV-LW2200, WV-LW1900 operating instructions
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
No model number suffix is shown in this manual.
(This illustration represents WV-LW2200.)
V
ideo M
onitor W
V-LW
2200
M
E
N
U
S
E
L
E
C
T
A
U
D
I
O
I
N
P
U
T
S
E
L
E
C
T
E
C
O
Operating Instructions
Video Monitor
Model No. WV-LW1900
WV-LW2200
2
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
• This apparatus must be earthed.
• Apparatus shall be connected to a main socket outlet with a
protective earthing connection.
• The mains plug or an appliance coupler shall remain readily
operable.
• To prevent fire or electric shock hazard, do not expose this
apparatus to rain or moisture.
• The apparatus should not be exposed to dripping or splashing and that no objects filled with liquids, such as vases,
should be placed on the apparatus.
• All work related to the installation of this product should be
made by qualified service personnel or system installers.
• The connections should comply with local electrical code.
NOTE: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be
required to correct the interference at his own expense.
FCC Caution: To assure continued compliance, (example use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications
not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
For U.S.A
This Class A digital apparatus complies with Canadian ICES-
003.
For Canada
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
Power disconnection. Unit with or without ON-OFF switches
have power supplied to the unit whenever the power cord is
inserted into the power source; however, the unit is operational
only when the ON-OFF switch is in the ON position. Unplug the
power cord to disconnect the main power for all units.
The serial number of this product may be found in the unit.
You should note the model number and serial number of this
unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event
of theft.
Model No.
Serial No.
This product has a fluorescent lamp that contains mercury.
Dispose may be regulated in your community due to environmental considerations. For disposal or recycling information,
please contact your local authorities, or the Electronic
Industries Alliance:
http://www.eiae.org
For U.S.A
For U.S.A
3
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart
is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
S3125A
4
Limitation of liability
THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR
NON-INFRINGEMENT OF THE THIRD PARTY'S RIGHT.
THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS.
CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION
AND/OR THE CORRESPONDING PRODUCT (S).
Disclaimer of warranty
IN NO EVENT SHALL Panasonic Corporation BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR
REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:
(1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR
EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;
(2) PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE USER;
(3) UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER.
5
Important Safety Instructions .......................................................................................................... 3
Limitation of liability ......................................................................................................................... 4
Disclaimer of warranty ..................................................................................................................... 4
Preface ............................................................................................................................................ 6
Trademarks and registered trademarks .......................................................................................... 6
Precautions ..................................................................................................................................... 6
Precautions for installation .............................................................................................................. 8
Major operating controls and their functions ...................................................................................9
■ Front View ................................................................................................................................. 9
■ Rear View .................................................................................................................................. 10
Turn on the power of the extension unit .......................................................................................... 12
Audio Volume Control ..................................................................................................................... 13
ECO Mode Activation/Deactivation ................................................................................................. 14
ECO mode activation .................................................................................................................... 14
ECO mode deactivation ................................................................................................................ 14
Video Adjustment and Setup ........................................................................................................... 15
Video adjustment .......................................................................................................................... 15
Screen setup ................................................................................................................................. 16
Language in the menus to be displayed ....................................................................................... 18
Operation time check .................................................................................................................... 19
Installation ....................................................................................................................................... 20
How to mount monitor stand ........................................................................................................ 20
How to remove monitor stand mounting bracket .......................................................................... 20
Screw holes for wall mounting bracket ......................................................................................... 20
Connections .................................................................................................................................. 21
Troubleshooting .............................................................................................................................. 23
Specifications .................................................................................................................................. 25
Standard Accessories ..................................................................................................................... 25
Appearance ..................................................................................................................................... 26
CONTENTS
6
Preface
This is a video monitor provided with a 19"-type (WVLW1900) or a 22"-type (V) (WV-LW2200) LCD panel.
• Built-in full high-definition panel (for WV-LW2200)/highdefinition panel (for WV-LW1900) with high-speed
response
• Supporting HDMI, composite video signal and analog
RGB signal for personal computer (PC)
• HDMI, video (480p/720p/1080i/1080p) and audio
(1 ch) supported
• Composite video, automatically switchable between
NTSC and PAL system
• PC display capacity supporting resolutions from VGA
(640 x 480) to SXGA (1280 x 1024). Picture display position can be automatically adjusted.
• Audio input x1 and built-in speaker with max. output of
0.5 W
• On-screen setup menu
• Auto-volt power supply from 100 V AC to 240 V AC
* The supplied power cord shall be used exclusively for
this monitor. The cord supports 120 V AC only. To use
this product with different power source, replace the
power cord.
• The screw holes for wall mounting at the rear of this
monitor comply with the VESA (Video Electronics
Standards Association) standards (100 mm pitch).
* VESA: Video Electronics Standards Association
Trademarks and registered trademarks
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
Precautions
• Refer all work related to the installation of this product to qualified service personnel or system
installers.
• Do not block the ventilation opening or slots on the
cover.
• Do not drop metallic parts through slots.
This could permanently damage the apparatus. Turn the
power off immediately and contact qualified service personnel for service.
• Do not attempt to disassemble this product.
To prevent electric shock, do not remove screws or covers.
There are no user-serviceable parts inside. Contact
qualified service personnel for maintenance.
• Do not strike or give a strong shock to this product.
It may cause damage or allow water to enter this product.
• Do not expose this product to water or moisture.
Do not try to operate it in wet areas.
Take immediate action if this product gets wet. Turn the
power off and refer servicing to qualified service personnel. Moisture can damage this product and also
cause electric shocks.
• Cleaning
Turn the power off when cleaning the unit. Otherwise it
may cause injuries.
Do not use strong or abrasive detergents when cleaning
this product body.
Use a dry cloth to clean this product when it is dirty.
When the dirt is hard to remove, use a mild detergent
and wipe gently.
7
• Do not operate this product beyond its specified
temperature, humidity, or power source ratings.
Use this product under conditions where temperatures
are between 0 °C and + 40 °C {+32 °F to +104 °F}, and
humidity below 90 %.
The input power source for this product is 120 V AC, 60
Hz.
• Do not mount this product on places subject to constant vibrations. That may cause trouble or damage.
• Use only the supplied power cord.
• Be sure to remove this product if it is not in use.
• The surface of the LCD Panel is applied by special
coating.
Do not touch or wipe the surface with a hard or abrasive
object. Failure to observe this may cause damage to the
LCD panel.
• The LCD panel is made from a very precise technology.
Some bright and dark spots may exist on the monitor
screen.
It is operating normally if there are 99.99 % active pixels.
• Image persistence may appear on the LCD after a
static image with strong contrast is continuously
displayed.
Such a phenomenon is caused by an LCD characteristic. The persistent image will disappear after a period of
time.
• Power switch
Even though the power switch is turned off, the power
supply will not be cut.
Unplug the power cord from the receptacle if this product is not used for a long time. When using the power
supply control unit, turn off the power of the power supply control unit.
• Notations
Refer to the label on the rear side of this product for the
ID, power supply and other notations of this product.
• Grounding
Ensure that the ground connection is properly and
securely made before use. If a grounding receptacle is
used, ensure that the ground resistance is 100 ohms or
less.
• Power supply
Be sure to make the ground connection before connecting the power plug of this product to the main power
supply. Also be sure to disconnect the ground after disconnecting the power plug of this product from the main
power supply if necessary. Any of the following circuit
breaking methods should be selected for the power
cord:
• Via a power supply control unit
• Direct connection of the power supply plug to the
receptacle without fail
• Connection of the power supply cord to the breaker
with a contact gap of 3.0 mm or more. The breaker
should be designed to break all the lines between
the main power supply and this product except the
grounding connection.
• Installation place
• This product is designed to be used indoors. This
product is not operable outdoors.
• Keep approx. 5-centimeter space on the top, rear
and both lateral sides of this product.
• Install this product in a vibration-free place.
Installation in a vibrating place causes this product
to malfunction.
• Do not install this product in any place where it will
be subjected to direct sunlight for a long time or
close to heating or cooling equipment. Failure to
observe this may cause deformation, discoloration,
failure, or malfunction. Also keep this product away
from water droplets or water splashes.
• Screwing
• The screws must be tightened with an appropriate
tightening torque according to the material and
strength of the installation area.
• Do not use an impact driver. Use of an impact driver
may damage the screws.
• When a screw is tightened, make the screw at a
right angle to the surface. After tightening the
screws, perform visual check to ensure tightening is
enough and there is no backlash.
8
Precautions for installation
Installation work shall be performed in accordance with
the technology standard of the electric installation.
Grounding
A grounding connection must be made before connecting
the power plug of this product to the main power supply. If a
grounded outlet is used, check the ground resistance (100
Ω or less).
Power supply
Be sure to connect to ground prior to connection of the
power plug to the main power supply. For disconnection
from ground, be sure to disconnect the power plug from the
main power supply first. Be sure to connect the power cord
via any of the following breaking devices:
(1) Connect the power cord via a power supply control unit.
(2) Install this monitor near an electric outlet, and connect
the power cord via the power plug.
(3) Connect the power cord to the breaker with contact gap
of 3.0 mm or more of a distribution board. The breaker
should be designed to break the current flows to and
from all the electrodes connected to the main power
supply except the ground protective conductor.
Installation place
• This monitor is designed to be used indoors. This monitor is not operable outdoors.
• Keep the both side surfaces, top surface and rear surface of this monitor approximately 5 cm away from the
wall.
• Do not mount the monitor on places subject to constant
vibrations. That may cause trouble or damage.
• Do not install this system in any place where it will be
subjected to direct sunlight for a long time or close to
any air conditioning equipment. Failure to observe this
may cause deformation, discoloration, failure, or malfunction. Please keep this product away from water
droplets or water splashes.
• Avoid the following locations for installation.
• Locations where it may get wet from rain or water
splash
• Locations where a chemical agent is used such as a
swimming pool
• Locations subject to steam and greasy fumes such
as a kitchen and in the special environment of solvents and inflammable gas atmosphere
• Locations where radiation, x-ray, intense radio wave,
or strong magnetism is produced
• Locations on the sea or by the sea, and locations
where a corrosive gas is present
Screwing
• The screws must be tightened with an appropriate tightening torque according to the material and strength of
the installation area.
• Do not use an impact driver. Failure to observe this may
damage the screw.
• When a screw is tightened, make the screw at a right
angle to the surface. After tightening the screws, perform visual check to ensure tightening is enough and
there is no backlash.
If this system is not used any more, be sure to dismantle
this system.
9
Major operating controls and their functions
■ Front View
(This illustration represents WV-LW2200.)
q Power button ( )
Powers on or off the monitor.
Note:
• Power is supplied via the power cord even while the
power button of the monitor set is off.
w Power indicator
This indicator lights green while power is supplied to this
monitor and lights orange in the ECO mode (☞ page
14). When this monitor power is turned off, it lights red.
e Input signal selection button (INPUT SELECT)
Every pressing this button can change input signals as
follows.
r Menu button (MENU)
Displays the main menu (☞ page 15). This button is also
used to determine the selected parameter in the setup
menus.
t Selection buttons (SELECT: C, D), ECO button
These buttons move the cursor in setup menus.
C : Down
D : Up
The C button functions as the ECO button other than the
setup menus to activate the ECO mode (☞ page 14).
y Audio buttons (AUDIO: +, –)
These buttons adjust the audio volume level. These buttons increments or decrements the selected parameter
in setup menus.
u Reset switch
Restarts this monitor.
i Monitor stand
o LCD panel
Take care not to pinch your hands or fingers between
the LCD panel and the monitor stand.
!0 Speaker
INPUT
SELECT
MENU SELECT AUDIO
ECO
w
r
ty
q
e
u
Video Monitor WV-LW2200
!0i o
VIDEO
PC
HDMI
Loading...