Panasonic WV-CM2080 User Manual
Specifications and Main Features
- Model No: WV-CM2080
- Voltage Supply Specification: 120V alternating current, 60Hz frequency.
- Power Consumption: 90 Watts
- Display: 21- 9/16 inches screen mesuring Diagonaly with a viewable area of over 20- 1/16 inches.
- HORIZONTAL VIDEO RESOLUTION: Exceeds 500 TV lines in the centre.
- S-Video Input: Y: Mini DIN type jack 1.0 V[p-p]/75 Ω, C: 0.286V[p-p]/75 Ω.
- Composite Video Input: 1.0 V[p-p] composite/75 Ω, BNC type x2
- Composite Video Output: Indoor-video auto termination signal. Loop through input television, 1 or Mini BNC x2 connectors
- Dynamic Range: -8 dB / Hi-Z, RCA pin jack 2 x RR
- Dynamic Range Move Output: Loop through input stringed coincident jack 2 x RW
- Horizontal Scanning Cooling Capacity: 15.734 kHz
- Vertical Scanning Frequency: 60Hz
- Sweep Linearity: 5% maximum
- Sweep Distortion: 5 % maximum
- Built in Audio/Visual Max Output: 0.7 Watts
- Data Port: 6 conductor modular type jack : 2 counts
- Standby Using / Switching On Off Terminals: One circuit.
- Relative Humidity for Operation: 90% and below
- Nominal Temperature Range for Operation: Minus 10 degrees Celsius to 50 degrees Celsius or 14 to 122 degree Fahrenheit.
- Dimensions: 482 Millimetres width by 443 millimetres height by 476 millimetres depth [ 19 in width by 17 7/16 in height by 18 3/4 in depth ]
- Weight: 26.0 kg (57.3 lbs)
Frequently Asked Questions
Q1: Until what specification does the WV-CM2080 monitor has its horizontal resolutuon?
A1: At the center, the WV-CM2080 monitor can exceed 500 TV lines as the maximum provided horizontal resolution.
Q2: What types of video inputs does the WV-CM2080 offer support for?
A2: The monitor comes with a total of three selectable inputs, which allows for two composite inputs and one S- video input.
Q3: Is it possible for the monitor to be remotely used?
A3: The provided, specified system controller can be used to control the WV-CM2080 through PS Data mode making it possible for it to be remotely controlled.
Q4: What are the dimensions of the WV-CM2080 monitor?
A4: With specifications of 482 mm (W) x 443 mm (H) x 476 mm (D), the WV-CM2080 can also be termed as an efficient monitor.
Q5: What is the temperature in the Operating Area of the Monitor?
A5: The Operating Area of the monitor’s temperature range lies between -10 degrees Celsius and +50 degrees Celsius (14-122 degrees Fahrenheit).
Q6: What is the power needed to run the WV-CM2080?
A6: It has been observed that this specific monitor needs about 90 W of power for it to function properly.
Q7: Is power saving possible in this monitor?
A7: There are two provided standby options for the monitor to cut down power from being wasted, these options are lower display brightness and blackout mode.
User Manual
Loading...