Panasonic WV-BP120 User Manual
CCTV Cameras
WV-BP120/WV-BP124
Before attempting to connect or operate this product,
please read these instructions completely.
WV-BP120
WV-BP124
(Lens : option)
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK), NO USER SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is interned to
alert the user to the presence of uninsulated "dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
The serial number of this product may be found on the top
of the unit.
You should note the serial number of this unit in the space
provided and retain this book as a permanent record of
your purchase to aid identification in the event of theft.
Model No.
Serial No.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
ENGLISH VERSION
For U.K.
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three pin mains plug for your
safety and convenience.
A 13 amp fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the replacement
fuse has a rating of 13 amp and that it is approved by ASTA or BSI to
BS1362.
Check for the ASTA mark
H or the BSI mark G on the body of the fuse.
If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement
cover is obtained.
A replacement fuse cover can be purchased from your local Panasonic
Dealer.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET
OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED
AND THE PLUG CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT
OFF PLUG IS INSERTED INTO ANY 13 AMP SOCKET.
If a new plug is to be fitted please observe the wiring code as shown below.
If in any doubt please consult a qualified electrician.
WARNING: This apparatus must be earthed.
-1-
We declare under our sole responsibility that the product to
which this declaration relates is in conformity with the standards or other normative documents following the provisions of
Directive EEC/89/336.
Noi dichiariamo sotto nostra esclusiva responsabilità che il
prodotto a cui si riferisce la presente dichiarazione risulta conforme ai seguenti standard o altri documenti normativi conformi
alle disposizioni della direttiva CEE/89/336.
Wij verklaren als enige aansprakelijke, dat het product waarop
deze verklaring betrekking heeft, voldoet aan de volgende normen of andere normatiefve dokumenten, overeenkomstig de
bepalingen van Richtlijn 89/336/EEC.
Vi erklærer os eneansvarlige for, at dette produkt, som denne
deklaration omhandler, er i overensstemmelse med den
følgende standarder eller andre normative dokumenter i følge
bestemmelserne i direktiv 89/336/EEC.
Vi deklarerar härmed värt fulla ansvar för att den produkt till
vilken denna deklaration hänvisar är i överensstämmelse med
standarddokument, eller andra normativa dokument som
framstölls i Direktiv 89/336/EEC.
Ilmoitamme yksinomaisella vastuullamme, että tuote, jota tämä
ilmoitus koskee, noudattaa seuraavia standardeja tai muita
ohjeellisia asiakirjoja, jotka noudattavat direktiivin 89/336/EEC.
säädöksiä.
Vi erklærer oss alene ansvarlige for at produktet som denne
erklæringen gjelder for, er i overensstemmelse med følgende
normer eller andre normgivende dokumenter som fælger
bestemmelsene i direktiv 89/336/EEC.
ENGLISH
IMPORTANT
The wires in this mains lead are coloured in accordance with the following
code.
Green-and-yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wire in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in your
plug, proceed as follows.
The wire which is coloured green-and-yellow must be connected to
the terminal in the plug which is marked with the letter E or by the earth
symbol
I or coloured green or green-and-yellow.
The wire which is coloured blue must be connected to the terminal in
the plug which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal
in the plug which is marked with the letter L or coloured red.
How to replace the fuse
Open the fuse compartment with
a screwdriver and replace the fuse
and fuse cover.
THIS APPARATUS MUST BE EARTHED.
To ensure safe operation the three-pin plug supplied must be inserted
only into a standard three-pin power point which is effectively earthed
through the normal household wiring. Extension cords used with the
equipment must be three-core and be correctly wired to provide connection to earth. Wrongly wired extension cords are a major cause of
fatalities.
The fact that the equipment operates satisfactorily does not imply that
the power point is earthed and that the installation is completely safe.
For your safety, if in any doubt about the effective earthing of the power
point, consult a qualified electrician.
For U.K.
For Australia
-2-
CONTENTS
PREFACE ...................................................................................................................................................................... 3
FEATURES .................................................................................................................................................................... 3
PRECAUTIONS ............................................................................................................................................................. 4
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ...................................................................................... 5
CONNECTIONS ............................................................................................................................................................ 8
LENSES ...................................................................................................................................................................... 10
FOCUS OR FLANGE-BACK ADJUSTMENT ............................................................................................................... 16
INSTALLATION OF CAMERA ..................................................................................................................................... 17
PREVENTION OF BLOOMING AND SMEAR ............................................................................................................. 17
LENS MAINTENANCE AND CLEANING .................................................................................................................... 17
SPECIFICATIONS ....................................................................................................................................................... 18
STANDARD ACCESSORIES ....................................................................................................................................... 19
OPTIONAL ACCESSORIES ........................................................................................................................................ 19
The model numbers listed in this Operating Instructions have no suffixed attached to it.
-3-
PREFACE
Panasonic's WV-BP120 series cameras introduce a
new level of high picture quality through the use of a
1/3 inch interline transfer CCD having 512 horizontal
pixels (picture elements). High performance-to-cost
ratio is achieved through the use of newly developed
Sync IC's and ability to shoot indoor scenes with a
fixed iris lens by use of Electronic Light Control (ELC)
function.
FEATURES
• Minimum illumination of 0.15 lx at F1.4 and Signalto-noise ratio of 46 dB by employing a 1/3 inch
interline transfer CCD image sensor with 512 (H) x
582 (V) pixels.
• 380 lines of horizontal resolution
• Either optional standard C-mount or Special Cmount (CS-mount) auto iris control lens can be
used with.
• Selectable auto iris control signal for the lens
either a video signal or DC control signal.
• Line-locked Sync or switchable Multiplexed Vertical Drive (VD2) automatically.
-4-
PRECAUTIONS
• Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws
or cover. There are no user-serviceable parts
inside.
Refer servicing to qualified service personnel.
• Handle the camera with care.
Do not abuse the camera. Avoid striking or shaking it. The camera could be damaged by improper
handling or storage.
• Do not expose the camera to rain or moisture,
or try to operate it in wet areas.
Do take immediate action if ever the camera do
becomes wet. Turn power off and refer servicing
to qualified service personnel. Moisture can damage the camera and also create the danger of
electric shock.
• Never face the camera toward the sun.
Whether the camera is in use or not, never face it
toward the sun. Do use caution when operating
the camera in the vicinity of spot lights or other
bright lights and light reflecting objects.
• Do not operate the camera beyond its
temperature, humidity or power source ratings.
Do not use the camera in an extreme environment
where high temperature or high humidity exist.
Use the camera under conditions where temperatures are within
−10°C - +50°C (14°F - 122°F), and
humidity is below 90%. The input power source is
220V - 240V AC 50 Hz for WV-BP120 or 24V AC 50
Hz for WV-BP124.
Loading...