Panasonic WV-BL730 User Manual
Specifications and Main Features
- Pick-up Device: Pixel Unit: 771 (H) x 492 (V), CCD unit: Frame Interline Transfer
- Scanning Area: scanning area equivalent to a 1/2 inch pick up tube, H: 6.4 mm and V: 4.8 mm
- Scanning: 525 Scanning lines 60 fields per second and 30 frames per second.
- Horizontal Frequency: F=15.734kHz
- Vertical Frequency: F=59.94 Hz
- Synchronization: Internal synchronizer, Line lock, External (VS) or Separate Vertical Drive (VD2) Selectable
- Video Output: 1.0 V[p-p] EIA composite : 75Ω / Type of connector: BNC
- Horizontal Resolution: 570 lines
- Signal-to-Noise Ratio: 50 dB (AGC off, weight on)
- Minimum Illumination: 0.02 Ix (0.002 foot candle) at F0.75: 0.04 Ix (0.004 foot candle) at F1.4
- Gain control: Menu selection of AGC ON or OFF (SET UP MENU)
- Electronic light control: Continuous variable shutter speed from 1/60s to 1/10,000s
- Back Light Compensator: Backlight compensator transmitter set to preset On or Off (SET UP MENU)
- Electronic Shutter Speed: t=1/60 (OFF) 1/100 1/250 1/500 1/1,000 1/2,000 1/4,000 1/10,000 s
- Mounting Lens: Choice of a C mount or a CS mount
- ALC Lens Type: control can be a DC or a video
- Ambient Operating Temperature:-10º or Celsius to +50 Celsius, 14º to 122 º Fahrenheit Operating range
- Ambient Operating Humidity: 90%
- Power Source:
- Power: AC Input 120V for the Model WV-BL730 which operates at 60 Hz and consumes 4.2 Watts. AC Input for the Model WV-BL734 is also set at 60 Hz but uses 24 volts so has a maximum consumption of 4.8 Watts. Additionally, it runs on 12V DC.
- Dimensions: The dimensions excluding the lens are (W)-67 x (H)-55 x (D)-123 mm.
- Weight: The weight without the lens included for model WV-BL730 is approximately 0.41 kgs (0.90 lbs). Whereas for the model WV-BL734 it is around 0.40 kgs (0.88 lbs).
- Standard Accessories: Body cap, ALC lens connector, and an AC power cord.
- Model Name: WV-BL730 & WV-BL734
Frequently Asked Questions
- Q: Which lenses are compatible with the models WV-BL730 and WV-BL734?
A: Attachments compatible include C-mount and CS-mount lenses as well as ALC lenses that can be connected with video signals through DC.
- Q: What is the range of the cameras’ illumination?
A: The type of lens installed in the camera alters its illumination level so with the F0.75 lenses minimum illumination required would be 0.02 and with the F1.4 lenses would be 0.04 lux.
- Q: What is the required input power of both WV-BL730 and WV-BL734 models?
A: The AC input for the WV-BL730 needs to be set at 120 volts; in comparison, the Model WV-BL734 requires a 12V DC or 24V AC.
- Q: Does the camera support synchronization? If yes, what type?
A: The camera has the capability of internal, line-locked or external synchronizing.
- Q: Is it possible to manually adjust the electronic light control function?
A: Absolutely, the light can either be set to automatic which is called ALC or ELC mode which stands for electronic me mode.
- Q: What is the maximum and minimum temperature and humidity that these parameters Lorem operate in?
A: The operating temperature for these cameras is anywhere between -10 degrees celsius to 50 degrees celsius and 14 degrees fahrenheit to 122 degrees fahrenheit and a fluctuating humidity of around 90 percent or even lower can be tolerated.
User Manual
Loading...