Panasonic WV-ASE201, WV-ASM200 Specification

i-PRO Management Software

WV-ASM200

Extension Software

WV-ASE201 / WV-ASE202

WV-ASE203 / WV-ASE204

WV-ASM200 with WV-ASE201

(System Controller WV-CU950 and monitor displays are optional.)

i-PRO management software for multi-recorder multi-site system

Key Features: WV-ASM200/WV-ASE201/WV-ASE202/WV-ASE203/WV-ASE204

•

Supports 16:9 video stream and 16:9 HD monitor. Displays 16:9 and 4:3 videos from

IP cameras on the same screen.

•

H.264 recording data in the SD/SDHC/SDXC memory card can be downloaded.

•

Convert le format from n3r (proprietary format) to MP4.

•

Online management system enables easy use without dongle.

•

Up to 100 recorders, 64 encoders and 256 directly connected cameras can be

registered. Up to 6,400 cameras registered in the recorders and 256 cameras registered in the encoders are automatically registered in the WV-ASM200 (the number of the cameras depends on the recorder and encoder).

•

With WV-ASE203*2, maximum 500 recorders can be registered, up to 32,000 cameras

registered in the recorders are automatically registered in the WV-ASM200 (the number of the cameras depends on the recorder and encoder).

•

Live images can be received directly from the camera/encoder or via the recorder

enabling exible network design.

•

Multi-Monitor option enables simultaneous use of Operation Display (1 / 4 / 9 / 16

split), Live Display (1 / 4 / 9 / 16 split) and Map Display each on a dedicated monitor. Single or two monitor operation is also available. A total of 20 screens can be displayed with the simultaneous use of the Operation Display and the Live Display at

a time.

With WV-ASE202, maximum 64 screens in operation display is possible.

•

Up to 16x 30 ips/camera images can be displayed in H.264 1.5 Mbps mode (VGA:

Normal quality mode) or MPEG-4 2 Mbps mode (VGA: Normal quality mode, QVGA: High quality mode, depending on the camera and camera setup).

•

Up to 400 camera groups: Cameras and multiscreen mode for the Operation Display

can be programmed and called up by manual or sequence operation.

•

Image resolution dynamically changes depending on the screen mode: VGA for Quad

screen, QVGA for 16 split screen, enabling optimum network usage (depending on the camera model).

•

Panasonic camera control: Pan/Tilt, Zoom, Focus, Brightness, Preset position call

and program (up to 256), Auto mode, AUX 1 ~ 3, Click Centering, Wheel Zoom, Specied area zoom by mouse dragging (depending on the camera model)

•

A camera, a group or a sequence can be called up on the Operation Display by their

ID with the optional system controller WV-CU950.

The camera displayed in the active window can be controlled by the system controller. Recorder playback operation can also be made by the system controller with Jog/Shuttle.

•

Alarm notication: A pop-up alarm message is displayed.

•

Individual alarm reset is possible.

•

Operation Display, Live Display, and Map Display reacts correspondingly with the alarm.

•

Displays the present alarm log in red.

•

When an alarm occurs, the monitor changes into the map automatically showing

where the alarm happened.

•

Illustrated camera, alarm and recorder icons for intuitive operations

•

Up to 64 camera icons can be freely positioned on a map with alarm status indicated

by the color of the icons.

•

Recorded images of up to 64 cameras (in case with WJ-ND400) can be downloaded by

one operation. Downloaded images can be viewed by the viewer software (provided).

•

Sophisticated user management: User authentication with time limited password,

5 user levels, User-Camera View/Control partitioning in conjunction with recorder’s user management function, Up to 32 user registrations

•

System logs can be saved in CSV format. Operation logs can automatically be erased

when specied time has passed (31 / 92 / 184 / 366 days).

•

Audio from a camera can be heard and the operator voice can be transmitted to the

camera’s audio output through the network (single channel at a time, full/half duplex depending on the camera).

•

Recorded audio with the WJ-ND200 or WJ-ND400 or WJ-NV200 can be played back

(single channel at a time).

•

Video Analytic functions of the WJ-NT314 such as intruder detection and object

abandonment/removal detection can be displayed.

•

When used with WJ-ND400 series, WJ-HD716/616, WJ-NV200, VMD search can be

operated.

*1 WV-ASE204 : NTSC area only *2 WV-ASE203 4 licenses are necessary. *3 WV-ASE201 is necessary.

Optional Accessory

Ethernet System Controller with 3D-Joystick & Jog/Shuttle

WV-CU950 (WV-ASE201 is necessary.)

System Example

Analog Camera x 4

H.264/MPEG-4/

JPEG Encoder

WJ-GXE500

Network Camera x 28

Network Disk Recorder

WJ-ND400

Switch

WV-CU950

Network Camera x 16

Switch

Network Disk Recorder

WJ-NV200

PC WV-ASM200 with WV-ASE201

Speciﬁcations: WV-ASM200/WV-ASE201/WV-ASE202/WV-ASE203/WV-ASE204

GUI Camera Control Function (depending on the Camera)

Click centering, Wheel zoom, Drag and zoom

Recorder Control (depending on the Recorder) Event Search

VMD Search

Multiscreen Mode Sequence Display

Display Performance 30 ips x 16 screens at H.264 1.5 Mbps, 30 ips x 16 screens at MPEG-4 2 Mbps Multi-Monitor*2 Camera Group Display

Number of Maps*2 Up to 100 maps (JPEG or Bit map), Link: 64 cameras and 20 maps / map

Image Download

SD memory Download

H.264 video ﬁles (mp4 ﬁles) saved on the SD memory card equipped with the

camera to a PC using the FTP function.

Recorder/Camera Access File Conversion Camera Title Display Clock Display Alarm Source Alarm Control Alarm Action

camera icon on the map lights up. Alarm message on the GUI and buzzer.

Digital Zoom Up to 4 times

Text Attachment System Log Recorder Log Download

User Management

Auto login: ON / OFF

Pan/Tilt, Zoom, Focus, Brightness, Preset position call and program (up to 256),

Auto mode (SEQ, SORT, AUTO PAN, PATROL, AUTO TRACK), AUX 1 ~ 3,

REC, PLAY, Rev PLAY, Pause, Stop, FF (up to 96x), REW (up to 96x), Prev Record, Next

In case with WJ-ND400 series, WJ-HD716/616, WJ-NV200

Panasonic alarm protocol

Reset, Auto reset (OFF / 10s / 20s / 30s / 1min / 5min)

Up to 16 alarm images can be displayed on the live monitor. Corresponding

Record, Prev Image, Next Image, Skip (up to 60 min.),Rev Skip, (up to 60 min.) Text

Target: Recorder (Camera) / Group / Map*2, Search criteria: Time date, Event type, Text

Spot / Quad (A-D) / 9 split / 16 split

10 programs, 64 steps/pattern, Spot / Quad / 9 split / 16 split

Dwell time: 3s / 5s / 10s / 15s / 20s / 25s / 30s / 35s / 40s / 45s / 50s / 55s / 1min

Up to 3 monitors (Operation / Live / Map), Up to 20 cameras can be displayed (Operation-4, Live-16) Up to 400 groups with 16 alphanumeric titles

Recorded images of up to 64 cameras (in case with WJ-ND400) can be downloaded. Manual download only. Viewer software can be extracted from the main software.

Indicates the function featured in some Panasonic's cameras that transfers

The access to the Recorder and Camera Web pages when logged in as admin

Convert a n3r ﬁle to the standard format (mp4)

On the GUI, Up to 16 characters On the GUI. Time: 12H/24H, Date: 5 formats (When the image comes from the recorder)

Free comment can be attached for each record and reviewed at later time. Up to 200 characters

Operation (100,000), System (1,000), Network error (1,000), Recorder error (1,000), Alarm (30,000)

Operator access, Network error, Error, Event

Registration: Up to 32 users + Administrator, ID: 4-14 digit, PW: 4-8 digit,

User level: 5 levels (Programmable), PW time limit: OFF / 31 / 92 / 184 / 366 days,

GUI Security Method Function

Alteration detection, Activation Key Card

General Microsoft The language of the OS must be same as selected GUI language. Required PC CPU: Intel Intel

When adding the license for WV-ASE202 and displaying images on a 64-screen: Intel RAM: 3 GB or more, When using more than one live window: 4 GB

Network

Proxy HTTP proxy supported (IP address and port No.)

FTP Passive/Active

Viewer

Playback Control

Software

Additional Functions Alteration detection, Save as JPEG, Two times zoom, Print

*1 WV-ASE204 : NTSC area only *2 WV-ASE201 is necessary. *3 Microsoft® Windows® XP not supported

Operation Window

Function Panel

System Setup GUI Language Supported OS*3

User authentication (ID and Password), Host authentication (IP address),

English, French, Italian, Spanish, German, Russian, Chinese, Japanese

Menu Bar

Software Comparison Chart

Functions

Main Functions / Description

Supported Devices

Camera

Recorder

Encoder

Direct

Via Recorder NVR

DVR

Decoder

Max. Devices

Controller Camera

Direct

Via Recorder

Via Encoder Via Decoder

Recorder Encoder Decoder

Supported Image Format

Controller

Supported Image Resolution

Max. screens AVMD Display (Frame and Tracking Line) Multiple Monitors Supported

Map Function Audio Event Search (T&D, Event type etc.) VMD Search Image Download

*4 Speciﬁc Models only. Also, JPEG only is supported and camera control is not supported. *5 WV-ASE203 x 4 licenses and 500 recorders are necessary.

Trademarks and registered trademarks

– Microsoft, and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries. – Axis is a registered trademark of Axis Communications AB. – Intel and Intel Core are registered trademarks of Intel Corporation. – "i-PRO" and "i-PRO SmartHD" logos are trademarks or registered trademarks of Panasonic Corporation.

Important

– Panasonic recommends a dedicated PC to prevent installation errors and to keep best performance. – Safety Precaution: carefully read the operating instructions and installation manual before using this product. – Panasonic can not be responsible for network performance and/or other manufacturer products that reside on the network. – When remote monitoring, please pay attention to the network design. For details, please contact your local Panasonic sales representatives.

WV-ASM200 (V.1.10 or later)

Management Software - Basic

Live / Playback / Control

i-PRO series

i-PRO series, BB series

WJ-ND400 series, WJ-ND300 series,

, Axis

+WV-ASE201

Extension Software

WJ-ND200 series,WJ-NV200 series WJ-HD716/616, WJ-HD300A series

WJ-GXE500, WJ-NT314, WJ-NT304

WV-CU950

256

6,400 (with WJ-ND400 series)

3,200 (with WJ-ND300 series)

1,600

(with WJ-ND200 series/WJ-NV200 series)

256 (with WJ-GXE500, WJ-NT314/304)

100

H.264, MPEG-4 (i-PRO series), M-JPEG

2,048 x 1,536, 1,920 x 1,080, 1,280 x 960, 1,280 x 720,

960 x 720, 800 x 600, 640 x 480, 640 x 360, 320 x 240, 320 x 160

(depending on the source equipment)

Yes

Yes (Up to 3 monitors:

Operation / Live / Map)

Yes

Yes (Live: 2-way, Playback: 1-way)

Yes(with WJ-ND400 series, WJ-HD716/616, WJ-NV200)

Yes

+WV-ASE202

Extension Software

Yes (Up to 6 monitors: Operation / Live / Map)

Setup page in English, French, Italian, Spanish, German, Russian, Chinese, Japanese

Microsoft® Windows Vista® Business SP2 32bit/64bit,

Windows® 7 Professional SP1 32bit/64bit

Core™ i5-2400, 2500,

Core™ i7-860 or faster

Core™ i7-2600

VRAM: 512 MB or more (256 MB min.), Microsoft

Web Broswer: Internet Explorer® 7.0 or later (depends on a connected device)

DirectX® 9.0c or later

Play, Rev Play, Pause, FF, REW, Prev Record, Next Record, Prev Image, Next Image

Tool Bar Status Bar

Information

Display Area

Operation Panel

+WV-ASE201 +WV-ASE202

WV-CU950

+WV-ASE203

Extension Software

Max. 1,280

Max. 32,000

(with WJ-ND400 series)

Max. 16,000

(with WJ-ND300 series)

Max. 8,000

(with WJ-ND200 series)

Max. 1,280

500

320

+WV-ASE204

Extension Software

WV-GXD400

Yes

• All TV pictures are simulated.

• Masses and dimensions are approximate.

• Speciﬁcations are subject to change without notice.

• These products may be subject to export control regulations.

• All product pictures are NTSC models.

DISTRIBUTED BY:

http://panasonic.net/security/

Printed in Japan (2A-081BL)