Panasonic VL-PS2410 Installation Manual

Installation Guide

Video Intercom System — Power Supply Unit

Model No. VL-PS2410

Thank you for purchasing a Panasonic product.
Please follow all instructions in this document and save it for future reference.
Carefully

This product is a separately sold power supply unit for use with Panasonic Video Intercom Systems.

Note to the installer

R Please read this document carefully, and install the product safely and correctly by following the

R Only use attachments/accessories specified by the manufacturer.
R The installation shall be carried out in accordance with all applicable installation rules.

read the information found in the section titled "1.1 Important safety information" in particular.

instructions.

Table of Contents

1. Important Information

1.1 Important safety information ..........................3

1.2 Important safety instructions .........................4

1.3 Disclaimer .....................................................4

1.4 Other important information ..........................4

1.5 General information .......................................4

1.6 For India only ................................................5

1.7 For Europe ....................................................5

2. Preparation

2.1 Included items ...............................................6

2.2 Specifications ................................................6

2.3 Device diagrams ...........................................6

3. Installation

3.1 Installation cautions .......................................7

3.2 Installing the power supply unit .....................7

3.3 Cleaning ......................................................10

3.4 Terms and illustrations in this

document ....................................................10

2

1.1 Important safety information

WARNING

CAUTION

To

1. . Important Information

prevent severe injury or loss of life or property, and to
ensure proper and safe operation of your product, read
this section carefully before using the product.

Preventing fire, electric shock and short circuits

R Leave

R For Australia/New Zealand only:

R Use only the power supply unit VL-PS2410.
R Do not place objects on the power cables. Install the

R Do not allow the power cables to be excessively

R Make sure all connections from the power outlet to

R Never touch the power supply unit and power cables

R Do not use the power supply unit for outdoor

R Do not disassemble or modify the product. Refer

R Do not touch the product or the power supply unit

R Never install wiring during a lightning storm.
R Do not connect non-specified devices.
R Do not connect a power cable to a terminal that is not

R When opening holes in walls for installation or wiring,

R Do not make any wiring connections when the power

R Do not install the product and power supply unit in the

installation work to the dealer. Installation
work requires technical knowledge and
experience. Electrical connection work should be
performed by certified personnel only. Failure to
observe this may cause fire, electric shock,
injury, or damage to the product. Consult the
dealer.

Installation must only be by a registered
electrician.
Wiring must be performed according to AS/NZS
3000 wiring rules.

product where no one can step or trip on the power
cables.

pulled, bent or placed under heavy objects.

the power supply unit are secure.

with wet hands.

installations (it is for indoor use only).

servicing to an authorised service centre when
service is required. Disassembling the product or
manipulating the product in a way not described in
the documentation may expose you to dangerous
voltages and other risks.

during an electrical storm. There may be a remote
risk of electric shock from lightning.

specified in this document.

or when securing the power cable, make sure you do
not damage existing wiring and ductwork.

outlet is turned on.

following places:
– Places where the product and power supply unit

may be splashed with water or chemicals

– Places where there is a high concentration of dust

or high humidity

1. Important Information

not push any objects through the openings of the

R Do

product.

R If any of the following conditions occur, disconnect

the power supply unit from the power outlet, and then
refer servicing to an authorised service centre.
– The product emits smoke, an abnormal smell or

makes unusual noise
– The power cables are damaged or frayed
– Metal objects have been dropped inside the

product

R When existing wires are used, it is possible that they

contain AC voltage. Contact an authorised service
centre.

Preventing accidents, injuries, and property damage

R Do not use the product in unstable areas or areas

prone to strong vibrations. This may cause the
product to fall, resulting in damage to the product or
injury.

R Make sure you turn off the power at the breaker

before performing any wiring work.

R Always connect power cables to the appropriate

connection terminals. Incorrectly connecting the
power cables may damage the power supply unit.

prevent the power cables from disconnecting and

R To

to prevent electric shock, secure the power cables
using the included cable binders and attach the cable
covers.

R Insert the power cables firmly all the way into the

terminals. If the cables are not inserted all the way,
heat may be generated.

R If the wiring passes outdoors, use a conduit and a

surge protector.

R If the wiring passes underground, use a conduit, and

do not make any connections underground.

R Install the product securely adhering to the

instructions in this document to prevent it from falling
off the wall. Avoid installing onto low-strength walls,
such as gypsum board, ALC (autoclaved lightweight
concrete), concrete block, or veneer (less than 18
mm thick) walls.

R The power supply unit is used as the main disconnect

device. Ensure that the power outlet is installed near
the product and is easily accessible.

3

1. Important Information

1.2 Important safety instructions

When

using this product, basic safety precautions should
always be followed to reduce the risk of fire, electric
shock, or personal injury.

1. Do not use this product near water. For example,

near a bathtub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool, and
the like.

2. Use only the power supply unit indicated in this

document.

SAVE THESE INSTRUCTIONS

1.3 Disclaimer

R To

the maximum extent permitted by law, Panasonic
assumes no responsibility for injuries or property
damage resulting from failures arising out of improper
installation or operation inconsistent with this
document.

1.4 Other important information

R When

R If you stop using the product, remove it from the walls

R When power fails, this product cannot be used.
R Panasonic may not be liable for damages due to

you leave the product unused for a long period

of time, unplug it from the power outlet.

to prevent it from falling off.

external factors such as power failures.

Graphical symbols for use on equipment and their
descriptions

Symbol Explanation

Alternating current (A.C.)

Direct current (D.C.)

Protective earth

Protective bonding earth

Functional earth

For indoor use only

Class P equipment (equipment in which
protection
Double Insulation or Reinforced
Insulation)

"ON" (power)

"OFF" (power)

Stand-by (power)

"ON"/"OFF" (power; push-push)

Caution, risk of electric shock

against electric shock relies on

1.5 General information

R In the event of problems, you should contact your

equipment supplier in the first instance.

R After removing the product and any included items

from the packaging, store, dispose, or recycle the
packaging as necessary. Note that certain types of
packaging may be a suffocation or choking hazard.

4