Panasonic VE-SV07 Quick Reference Guide

Volume control button ( )

Hold/Caller ID button Intercom/Text entry mode button Speaker Battery cover Antennas Charger Speaker Page button Erase button Repeat button Skip button Stop button In Use indicator Auto answer button & indicator Playback button Volume control buttons

QuickReferenceGuide

PartsDescriptions

Earpiece Liquid crystal display Headset jack Talk button Speakerphone button Numeral/Character buttons Tone button (to switch to DTMF tone) Flash/Clear button Microphone Multi-operation buttons Voice change button Off button

Redial button ( )

Phone book button ( )

12 13 14

Personal Phone

Base Unit

Backside View

■本機は日本国内用です。国外での使用に対するサービスは致しかねます。

■This product is designed for use in Japan.

Panasonic cannot provide service for this product if used outside Japan.

27 26



BasicOperations

Personal phone

■

To make a call

Lift the personal phone from the base unit and press ( ).

Dial.......To end the call, place the personal

phone on the base unit or press ( ).

■

To receive a call

When the phone rings... Lift the personal phone from the

base unit

or press

Talk......To end the call, place the

personal phone on the

base unit

or press .

■

To place the current call on hold

Press ( ) during a call.

■

To retrieve the held call

Press or .

■

To make a call using the speakerphone (Hands-free talk)

Press ( ). Dial. Talk to

he microphone......To end the call, place the

personal phone on the base unit or press

■

To receive a call with the speakerphone (Hands-free talk)

When the phone rings... With the personal phone placed on the

base unit

press or .

Talk to the microphone.....To end the call,

press .

■

To hear recorded messages while away from home (Remote control) Preparation before you leave home

Store a remote control number. Press .

Enter the desired 4-digit number.

Press .

登録

機能

●

The number after the button shows the location of the button described in the previous page.

When you leave home, press . (The Auto answer indicator

on the base unit turns on.)

To hear messages

Dial your home phone number. While the outgoing message is played back...

Enter your remote control number. Announcement Press . You will hear recorded

messages if any.

NOTE

●

This operation can be made only from telephones which can send DTMF signals.

Base unit

■

To use TAM (Telephone Answering Machine)

When you leave home, press ( ).

(The Auto answer indicator ( ) on the base

unit turns on.)

When receiving a call while TAM is activated, it answers the call automatically in Japanese, and records the incoming messages. Then, the Auto answer indicator on the base unit starts flashing.

When you return home, press to play back the messages. The Auto answer indicator turns off and the answering mode is deactivated.

To erase the message, press ( ) while

listening to the message you want to erase.

To play back the message while TAM is

deactivated, press ( ).

*Up to 50 messages can be recorded for

approx. 12 minutes in total.

Quick Reference Guide

困ったとき