Television placement
Television (sold separately ) /
Téléviseur (vendu séparément)
TV stand /
Meuble télé
CAUTION: HEAVY UNIT. ASSISTANCE
IS REQUIRED TO COMPLETE THIS
STEP
Printed in U.S.A. / Imprimé aux États-Unis
LSQT0769 A
For improvement purposes, design and specifi cations are subject to change without notice.
Pour des raisons d´amélioration, le design et les caractéristiques sont sujets à changement sans préavis.
TY-50LC13C
Specifi cations
Spécifi cations
TY-50LC13C
To maintain appearance we recommend the following:
• Painted or acrylic surfaces
Use a damp cloth for cleaning. Do not use abrasives or chemical
based clean ers.
NOTE:
As with all indoor furniture, this unit should not be exposed
to direct sunlight, extreme temperatures or moisture, as
this can result in serious irreparable damage.
Dimensions
(W ✕ H ✕ D)
1 028 mm ✕ 442 mm ✕ 555 mm
40 8/16″ ✕ 17 6/16″ ✕ 21 14/16″
Weight 20 kg (44.1 lbs)
Inner shelf
max. load
15 kg (33.1 lbs)
Dimensions
(L ✕ H ✕ P)
1 028 mm ✕ 442 mm ✕ 555 mm
40 8/16 po ✕ 17 6/16 po ✕ 21 14/16 po
Poids 20 kg (44,1 lb)
Charge max. sur
tablette intérieure
15 kg (33,1 lb)
For parts inquiries or for out of warranty purchases (U.S.A.)
PANASONIC SERVICES COMPANY
20421 84th South, Kent, Washington 98032 • Tel: 1-800-833-9626 • Fax: 1-800-237-9080
For information on parts in Canada / Renseignements sur les pièces au Canada
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3 • Tel. / Tél.: (905) 624-2644
NOTA:
Afi n de prévenir tout dommage irréparable, ne pas exposer
aux rayons directs du soleil, à des températures élevées ou
à une humidité excessive.
Pour conserver au meuble son apparence d’origine:
• Surfaces peintes ou en acrylique
Nettoyer avec un chiffon doux humide. Ne pas utiliser de
produits chimiques ou abrasifs.
Installation du téléviseur
ATTENTION : LE TÉLÉVISEUR EST
LOURD, DEMANDER DE L’AIDE
POUR LE METTRE EN PLACE.
1 Line the Projection Display up with the
Guide Pin and rest it on the TV Stand.
2 Insert 2 Brackets ③ into the slits on
back of the Projection Display, then
fasten the Projection Display to the TV
Stand with 2 screws ④.
Guide Pin /
Goupille
Bracket Slit /
Ouverture pour
support
③
1 Aligner l’écran de projection
multimédia avec la goupille et le
déposer sur le meuble.
2 Insérer 2 supports ③ dans les
ouvertures à l’arrière de l’écran de
projection multimédia puis le fi xer au
meuble avec 2 vis ④.
④