Panasonic TX-32LXD60, TX-26LXD60, TX-23LXD60 User Manual

Operating Instructions

Digital LCD TV

TX---32LXD60
TX---26LXD60
TX---23LXD60

Please read these instructions before operating your set and retain them for future reference.

(U.K. Standard)

WELCOME

Dear Panasonic Customer,
Welcome to the Panasonic family of customers.
We hope that you have many years of enjoyment from your new digital LCD television. This is a very
advanced television; however , the Quick Start Guide will allow you to use the TV as quickly as
possible. You can then read the instructions completely and retain them for future reference.

Analogue and Digital television --- what are they?

Analogue transmission is the system that has been used for many years for broadcasting television
programmes. With continuous improvements in technology it is now possible to transmit
programmes in a digital format, allowing clearer pictures, more stations and other services to be
displayed on screen. Digital television is provided in three different ways; it can be sent along a cable
connection direct to your house, broadcast from a satellite, or broadcast using traditional land based
(terrestrial) transmitters.T he first two options require youto havean extra ‘settop box’ decoder and in
the case of satellite, a receiving dish mounted outdoors. While allowing you to receive traditional
analogue transmissions in the usual way, this television can also receive terrestrial digital services
using an integrated DVB (Digital Video Broadcasting) decoder. This allows you to enjoy the new era
of digital terrestrial television, including future interactive services, without the need for a ‘set top box’
or satellite dish --- your current roof or loft mounted antenna is all you need.
DVB is a trademark of the DVB Digital Video Broadcasting Project (1991 to 1996).

CONTENTS

Warnings and Precautions 3.............

Accessories 4..........................

Installation 5...........................

Maintenance 5..........................

Basic Controls 6........................

Quick Start Guide 7.....................

Analogue Programme Guide 11..........

DVB Programme Guide (EPG) 12.........

Aspect Controls 14......................

Using On Screen Displays 17............

Picture Menu 18........................

Sound Menu 19.........................

Setup Menu 20..........................

Tuning Menu -- (Analogue mode) 21......

Tuning Menu -- Programme Edit 22.......

Tuning Menu --Auto setup

(Analogue Mode). 25....................

Tuning Menu --Manual tuning

(Analogue mode) 26.....................

Setup Menu Owner I.D. 28...............

Setup Menu Shipping Condition 29.......

DVB Setup Menu Overview (DVB) Mode 30...

Timer Programming Menu (DVB Mode) 31...

Profile Edit Menu (DVB mode) 33............

Child Lock Menu (DVB mode) 34............

DVB Tuning Menu (DVB mode) 35...........

DVB System Setup (DVB mode) 36..........

Common Interface Module 37...............

System Update Menu (DVB mode) 38........

Q--Link 39.................................

VCR/DVD/R Operation 40...................

Te l e t e x t Op e r a t i o n 4 1.......................

Connections (AV) 44.......................

HDMI Functions 46.........................

Connections (HDMI) 47.....................

Troubleshooting 49.........................

DVB Troubleshooting 50....................

Frequently asked Questions 51.............

On Screen Messages 52....................

Foryourguidance 54......................

Specifications 54...........................

2

WARNINGS AND PRECAUTIONS

D This TV set is designed to operate on 220-- 240V, 50Hz A.C.
D To prevent damage which might result in electric shock or fire,

do not expose this LCD television to rain or excessive
moisture.
This TV must not be exposed to dripping or splashing water
and objects filled with liquid, such as vases, must not be
placed on top of or above the TV.

D WARNING : HIGH VOLTAGE !!!

Do not remove the rear cover as live parts are accessible
when it is removed. There are no user serviceable parts
inside.

D Avoid exposing the TV set to direct sunlight and other

sources of heat e.g. lit candles.

D Ensure that the mains plug is easily accessible.
D Never push objects of any kind into this LCD TV

through cabinet slots as they may touch dangerous
voltage points or short out parts that could result in a
fire or electric shock.

D To prevent injury, this apparatus must be securely attached

to the floor/wall in accordance with the installation
instructions (mounting bracket is not supplied).

D The On/Off switch on this model does not fully disconnect

the TV from the mains supply. Remove the mains plug from
the wall socket when the TV set is not used for a prolonged
period of time.

D CABINET AND LCD PANEL CARE

Remove the mains plug from the wall socket. The cabinet
and LCD panel can be cleaned with a soft cloth moistened
with mild detergent and water. Do not use solutions
containing benzol or petroleum.

D Adequate ventilation is essential to prevent failure of

electrical components, we recommend that a gap of at
least 10 cm is left all around this LCD television even
when it is placed inside a cabinet or between shelves.

D When ambient temperature is cool, the picture may take

a short time to reach normal brightness, but this is not a
malfunction. (After brief moment, the picture will have
normal brightness.)

D Ventilation should not be impleded by covering the

ventilation openings with items such as newspapers,
tablecloths and curtains.

D TV GAMES / HOME COMPUTERS

Extended use of TV games or home computers with any
television set can cause a permanent ‘shadow’ on the
screen. This type of irreversible LCD panel damage, can be
limited by observing the following points:

D Reduce the brightness and contrast levels to a minimum

viewing level.

D Do not operate the television set for a continuous period of

time while using TV games or home computers.

D Do not allow a still picture to be displayed for an extended

period, as this can cause a permanent after --- image to
remain on the LCD TV screen.

D Examples of still pictures include logos, v ideo games,

computer images, teletext and images displayed in 4:3
mode.

D This type of LCD panel damage is not an operating defect,

and as such is not covered by the Panasonic warranty.

FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY

This appliance is supplied with a fitted three pin mains plug for your safety and convenience. A 5 amp fuse is fitted in this plug. If the
fuse is replaced then the replacement fuse must be 5 amp rated and should be approved by ASTA or BSI to BS1362.

ASA

Check for the ASTA mark

If the fitted plug has a removable fuse cover you m ust ensure that it is ref itted when the fuse isreplaced. I f you
lose the fuse cover the plug must not be used until a replacement cover is obtained. Replacement fuse
covers can be purchased through your local Panasonic dealer.

The plug fitted to this appliance incorporates a mains filter circuit. If this is removed or replaced with a
non-- filtered plug this television will no longer meet the European standards for Electromagnetic
Compatibility (EMC). If the fitted plug is unsuitable for the socket outlet in your home an appropriate
adapter should be used.
Nonetheless, if the fitted plug is replaced, the fuse should be taken out and the cut-- off plug disposed of
safely. There is danger of severe electrical shock if the cut off plug is inserted into any 13 amp socket.

If a new plug is to be fitted please observe the wiring code as shown below.If in any doubt please consult a
qualified electrician.

Howtoreplacethefuse(forplugtypeshowninexample1):

Lift out the removable fuse compartment with a screwdriver and replace the fuse, then refit securely into the

mains plug (see example 1).
Howtoreplacethefuse(forplugtypeshowninexample2):

Lift open the fuse compartment, in the mains plug, with a screwdriver, and replace the fuse,
then press the fuse cover down securely (see example 2).

IMPORTANT

As the colours of the wires in the mains lead of this appliance may not correspond to the markings identifying the terminals in your plug,
proceed as follows :--

1. The BLUE

2. The BROWN

IMPORTANT NOTE

marked with the letter ‘E’ or the earth symbol.

:-- The wires in the mains lead of this appliance are coloured in accordance with the following code :--

wire must be connected to the terminal marked ‘N’ or coloured black.

wire must be connected to the terminal marked ‘L’ or coloured red.
: Under no circumstances should either of these wires be connected to the Earth terminal of the three pin plug,

or the BSI mark on the body of the fuse.

Example 1

Example 2

BLUE : NEUTRAL BROWN : LIVE

3

ACCESSORIES

Check that you have the accessories and items shown

Operating Instruction book

Remote Control Transmitter
(EUR 7651050A)

Batteries for the Remote Control
Transmitter.(2 x R6 (UM3) size)

Customer Survey

Clamper
(TX---26LXD60,
TX---32LXD60 only)

1 Year Guarantee Registration

Pan European Guarantee Card

n

Remote control batteries

12

Pull and hold the hook, then open
the battery cover

Insert batteries -- note correct polarity (+ and -- )

3

D Make sure that the batteries are fitted the correct way

round.

D Do not mix old batteries with new batteries. Remove old,

exhausted batteries immediately.

Replace the cover

4

D Do not mix different battery types, i.e. Alkaline and

Manganese or use rechargeable (Ni---Cd, Ni ---MH)
batteries.

INSTALLATION

Please use the apparatus only with the stands supplied or with the appropriate wall mount kits.

Receiver Location

Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) w ill fall on the
screen.
Use of some t ypes of fluorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or
moisture.

Optional External Equipment

The Video/Audio connection between components can be made with shielded video and audio cables. For best
performance, Antenna cables should utilize 75 Ohm coaxial shielded wire. Cables are available from your dealer or
electronic supply store.
Before you purchase any cables, be sure you know what type of output and input connectors your various components
require. Also determine the length of cable you’ll need.

For optimum quality picture

When the LCD is exposed to light from outdoors or lighting fixtures, high ---contrast pictures may not be displayed clearly .
Turn off fluorescent lamps near the LCD and place in location not exposed to outdoor light.

How to use the LCD stand

Adjust the stand to your desired angle. The stand angle can be adjusted in the following directions:

TX---32/26/23LXD60

TX---23LXD60 only

20_ Right
20_ Left

20_

20_

5_ Forward
10_ Backward
20_ Right
20_ Left

5_ 10_

MAINTENANCE

To clean this unit, wip e with a soft, dry cloth.

If the surfaces are extremely dirty, use a soft cloth dipped in a soap and water solution or a weak
detergent solution.

D Use eyeglass cleaner to remove stubborn dirt from the LCD.
D Never use alcohol, paint thinner or benzine to clean this set.
D Before using a chemically treated cloth, carefully read the instructions that

came with the cloth.

D Do not wipe the LCD with water.

Wipe the cabinet with a soft cloth.

If the cabinet is heavily soiled, wipe with a well ---wrung soft cloth dipped in kitchen cleanser

(neutral) diluted with water.

CAUTION:If wa ter or similar substances get inside the monitor via the liquid crystal panel surface, a malfunction

may result.

5

BASIC CONTROLS: TOP PANEL AND REMOTE CONTROL

MAINS
Power On/Off
switch

TV/AV switch
(see page 44)

STR (Normalisation store) Used to store
tuning and other function settings

F (Function select)
Displays the On Screen Display functions, use repeatedly to select from the available functions -- Volume,
Contrast, Brightness, Colour, Sharpness, Tint (in NTSC mode), Bass, Treble, Balance and Analogue Tuning
mode

Standby On / Off button

Switches TV On or Off (Standby mode)

Guide button

Displays the DVB and Analogue TV

Guide(Seepage11---13)

Menu button

Press t o access the Picture, Sound and

Setup menus (see page 17)

Press to select a function or store a setting.

Press after selecting programme positions

to quickly change programme.

Coloured buttons used for the selection,

navigation and operation of various functions

Teletext button (See page 41)

STTL button

Text F.P. button (Analogue mode)

Subtitle On/Off (DVB mode)

Seepage13.

Direct channel access

Available in Analogue mode.

During normal TV viewing or when in the

Tuning, Programme edit or Manual Tuning

menus, press and then enter channel number

using t he numeric buttons

Programme up / down button

Aspect control button

(see page 14)

Increases or decreases the programme position by

one. When a function is already displayed, press to
increase or decrease the selected function

Mode button

Switch between viewing DVB and
Analogue modes

Direct TV Record button
(See page 39)

Switch between viewing TV or AV
input(Seepage44)

Cursor buttons to make selections
and adjustments

Exit the mode

Text Hold/Picture Still button
(See page 41)

Text Index button (See page 42)

Programme / channel change buttons
(0--- 9) and Teletext page buttons
(see page 41)
When in standby mode switches TV On

Status button
Press to display status information
for the current Programme position)
(See page 13)

Volume up / down button

N (Normalize) button
Resets all settings to their default levels

Sound mute On / Off

VCR / DVD buttons
(See page 40)

6

QUICK START GUIDE

Connection and setting up options

1. If connecting the TV using an RF cable only, proceed to option 1.

2. If connecting the TV using SCART and RF cables, proceed to option 2.

1

Connection of TV using an RF cable only

Connect the RF cable into the TV Aerial socket

2

Connection of TV and VCR (DVD/R) using SCART and RF cables

SCART connections

The VCR (DVD/R) can be connected to the TV using a SCART cable if you are using a SCART equipped VCR (DVD/R).
Use the AV2 SCART socket of the TV for a VCR (DVD/R)

RF connections

Connect the RF cable to the Aerial In socket of the VCR (DVD/R) and an RF cable from the VCR (DVD/R) Aerial out socket
to the TV Aerial socket

TV

TV Aerial Input Socket

TV Aerial Input Socket

AV2 Socket

SCART cabel (not supplied)

VCR / DVD/R

NOTES:

Additional equipment and cables are not supplied
Further details of Audio/Video connections can be found on pages 44--- 45.

RF cable (not supplied)

Aerial

Input

Socket

Aerial
Output
Socket

7

QUICK START GUIDE

Connection of TV,VCR (DVD/R) and Satellite Receiver using SCART and RF cables

3

Scart Connections

S Fully wired SCART cables should be used for all the SCART connections.
S The AV2 SCART of the VCR (DVD/R) must be connected to the VCR socket of the Satellite Receiver
S The TV SCART socket of the Satellite Receiver must be connected to the AV1 SCART socket of the TV.

RF Connections

S Connect an RF cable to the Aerial In socket of the Satellite Receiver.
S Connect an RF cable from the RF Out socket of the Satellite Receiver to the RF In socket
S Connect an RF cable from the RF Out socket of the VCR (DVD/R) to the TV Aerial In socket

TV Aerial Input Socket

SATELLITE

RECEIVER

VCR / DVD/R

NOTES:

Additional equipment and cables are not supplied
Further details of Audio/Video connections can be found on pages 44--- 45.

8

QUICK START GUIDE

4

Programmes will appear immediately if your dealer has
programmed the TV for you.
If the TV has not been programmed for you then Auto setup
will begin.
The TV will search for DVB stations and Analogue stations:
TV stations will be located, sorted into order and stored ready
for use. Stations are sorted into the following order:
S DVB Stations: Are sorted by their logical channel number
sent by the broadcasters, which can be grouped into a
favourite channels list by using Profile Edit. See page 33.
SAnalogue Stati ons: Are sorted into channel order, but can
be changed to your preference. See page 22.
The sorted programme order depends upon the TV signal,
the broadcasting system, and reception conditions.

5

TV to VCR or DVD Recorder Download

If a “Q---Link”, “NEXTVIEWLINK” or compatible recording device has been connected to a Scart ter­minal (AV1/AV2) before starting Step 1, programme information will be downloaded to that device.
Only the analogue programme positions will be downloaded to the recording device, in the same
order as stored in the TV. See page 24.
Not all VCRs / DVD Recorders support this download of programme information, some may require to
be started manually.
Refer to the recording device’s operating instruction book.
If a recording device other than those described above has been connected, then there will be no
download operation.

D If the VCR (DVD/R) has not accepted download data from the TV, you may need to select the Download

option from the VCR (DVD/R)’s menu.

D If Q ---Link is not operating correctly, check it is connected to the television’s AV1 or AV2 socket, the

SCART lead is a “full function” type, and the VCR (DVD/R) is compatible with Q ---Link, NEXTVIEWLINK
or similar technologies. Ask your dealer for further details.

D For further information on Q---Link and connecting equipment, see pages 39 and 44.

9

QUICK START GUIDE

Owner ID

6

As an added feature, this TV has the option of adding a
security code (Owner ID) and personal details into its
memory, so that in the unfortunate event of theft it will help
thePolicetotracetheowner.

Using the numeric buttons, 0 to 9 on your remote control,
enteryourown4digitOwnerIDPIN NUMBER.

If a 4 digit PIN NUMBER was entered above, you will be taken
automatically to the NAME line.

If not, using the left or right cursor buttons move to the NAME line.
Change character using the up or down cursor buttons.
Select the character position using the left or right cursor buttons.
Repeat above until NAME, HOUSE NUMBER and POSTCODE are
entered.
Press the OK button to store the details.
Press the OK buttonagain,whenyouareasked“Areyousure?”.

For further information on Owner I.D., see page 28.

7

Auto Setup is now complete
You are now ready to begin viewing programmes
The cursor controls provide the two basic functions:

Channels can selected directly using numeric key
pad on the remote control

Access to channels can also be gained using the
guide button. (See pages 11 and 12)

Adjust Volume Change Channel

GUIDE

10

ANALOGUE PROGRAMME GUIDE

The analogue programme guide shows programme list.

To view a list of the stations
that have been found, press
the GUIDE button on the
remote control

In this guide, use the cursor
buttons to move the cursor
bar around the list

Use the programme change
button to step through the
guidepagebypage

GUIDE

Select

Select

Confirm
Exit

Page -­Page +

Pres the OK button to view
the selected programme

TheGuidecanbecleared
from the screen using
the EXIT or GUIDE button.

EXIT

GUIDE

11

TV Guide---Electronic Programme Guide (EPG) (DVB mode)

The DVB TV Guide displays the current programmes being transmitted, and forthcoming programmes on each DVB
channel, up to about one week ahead (If broadcasters transmit the programmes information).

Press the GUIDE button.
Choose from Landscape or Portrait display style by pressing the
GUIDE button repeatedly.
Press the Red button to move the EPG listing to the previous day.
Press the Green button to move the EPG listing to next day.
Press the Yellow button to view a list of Categories.
You can create a favourites list can be customised using the Profile Edit
menu (see page 27).
Press the Blue button to view a list of Prog. type.
EPGlistingcanbesettodisplaybyCategoryorProgrammeType.
For example press the Yellow button and select “Free TV”,
“Radio” services or “Profile 1” by pressing the up or down cursor
buttons. Press the OK button to view a list of the selected category.

To view any of the current DVB programmes, select it with the cursor
buttons and press the OK button.

Information and Timer Programming (ex. Landscape)

You can view further information about the selected programme:

Select the programme for which you require further

information using the cursor buttons.

Press the i button to display the information.

Press the i button again to return to the list of programmes.

When you select a future programme from the EPG listing,

press the OK button to set timer programming for recording

on a Q---Link compatible recorder. See page

Press the MENU buttontoreturntotheTVGuide.

Press the EXIT button to exit the Guide

31. 32, 39.

12

TV Guide---Electronic Programme Guide (EPG) (DVB mode)

In DVB mode

Information banner will appear when changing channel, or pressing the (Information) button. The banner gives the user
information about the channel and programme currently being viewed. The banner will time out and dissapear from the
screen after a set time period, this time period can be set in the DVB System Setup menu. See page 30.

S

Press the left or right cursor button while banner is displayed to switch between Now and Next.

This switches between the information for the current Programme being s hown (Now)
and the next Programme to be shown (Next).

Press the up or down cursor button to step through the banner information for all channels.

Press t he OK button to view a channel. Now and Next can also be used in this mode.

While the banner appears
Press the
the current selected programme.
Press the
To clear the banner from the screen while in extended banner mode, press the EXIT button.

Viewing Category

Press the Blue button while in the banner to scroll through available categories.
For example
AllServices: AllavailableServices
Free TV : Free TV channels only
Pay TV: Encrypted TV channels
Radio : Radio channels only
Information: Information given on individual programmes
Profile Select one of four possible user defined profiles
Press the EXIT button to exit the banner at any time.

In Analogue mode
Pressing the
few seconds. This will then be timed out to display just the programme position number

near the top left corner of the screen.
To remove this programme position number, press the

i button t o display an extended banner showing any information available on

i button while in extended banner mode to return to normal banner view.

i (Information) button will display the analogue channel information for a

i (Information) button again.

EXIT

Subtitles On / Off (DVB mode)

In DVB mode
Press the STTL button to switch Subtitles ON.
Subtitles will appear (if available) by the language you select in
Preferred Subtitles in DVB System Setup menu. See page 30.
Press again to switch Subtitles OFF.
Digital text is not available whilst subtitles are switched on.

13

ASPECT CONTROLS

The widescreen TV will allow you to enjoy viewing the picture at its optimum size and aspect,

including widescreen ‘cinema format’ pictures.

Press the ASPECT button repeatedly to move
through the seven aspect options: Auto
Aspect, 16:9, 14:9, 4:3, Zoo m1, Zoom2 and
Zoom3.
OR
Press the ASPECT button then use the RED
or GREEN buttons to move in either direction
through the seven aspect options.

Auto Aspect

Auto Aspect

to use to fill your screen. It does this using a four
step process to determine if the picture being
viewed is a widescreen picture.

Auto Aspect detects a widescreen signal it

If
switches into the appropriate 16:9 or 14:9
widescreen mode. If
detect a widescreen signal then this advanced
TV set enhances the picture for optimum
viewing pleasure.

The text shown on the screen indicates how

determines the best aspect ratio

Auto Aspect does not

Auto Aspect determined which ratio to use:

ASPECT

WIDE

’WIDE’ appears in the top left of the screen, Auto Aspect switches

to the appropriate 16:9 or 14:9 widescreen ratio.

Auto Aspect

’WIDE’ appears in the top left of the screen if a
widescreeen identification signal (WSS) is
found or a signal found through a Scart socket.

Auto Aspect switches to the appropriate 16:9

or 14:9 widescreen ratio
’Panasonic Auto’ appears in the top left of the
screen if black stripes above and below t he
picture are detected.
the best ratio and expands the picture to fill the
screen. This process can take several minutes,
depending on the darkness of the picture.

You may prefer to manually select one of the
other aspect options available to view the
picture.

Notes:

D If, in Auto Aspect mode, you experience

problems with the screen display size when
playing back widescreen format recordings
from your VCR then it is possible that the
tracking control of your VCR requires
adjustment (your VCR instruction book will
contain adjustment details).

D The widescreen aspect ratios of different

filmsandprogrammescanvary.Iftheseare
wider than a standard 16:9 aspect picture
then a black band may be visible at the top
and bottom of the screen.

Auto Aspect chooses

’Auto Aspect’ appears in the top left of the screen,

The best ratio is chosen and the picture expanded to fill the screen.

Auto Aspect

Press the ASPECT button, then use the RED or GREEN buttons to

move in either direction through the seven aspect options.

14

ASPECT CONTROLS

16:9

16:9 will display a true 16:9

(anamorphic) picture with no
aspect distortions.

14:9

14:9 will display a 14:9 letterbox

or 4:3 picture with no aspect
distortions.

16:9

16:9

14:9

4:3

4:3 will display a 4:3 picture at

its standard 4:3 size with no
aspect distortions.

14:9

4:3

4:3

15

ASPECT CONTROLS

Zoom1

Zoom1 will display 16:9

letterbox or 4:3 pictures with no
aspect distortions

Zoom2

Zoom2 will display 16:9

anamorphic letterbox pictures
as a full screen display with no
aspect distortions

Zoom1

Zoom1

Zoom2

Zoom3

Zoom3 will display 21:9

letterbox pictures as a full
screen display with no aspect
distortions

Zoom2

Zoom3

Zoom3

16

USING THE ON SCREEN DISPLAYS

This TV has a comprehensive system of On Screen Display menus to access

adjustments and options

Menu Title

Sub-- menus

Instructions

Picture menu

Viewing mode Dynamic

Contrast
Brightness
Colour
Sharpness
Colour balance Normal
P--NR Off

Main menu

Picture menu

Sound menu
Setup menu

Select

Access

Exit

Return

Indicator for options

Selection bar

Some selections, for example, Contrast, Brightness, Colour and Sharpness will allow you to
increase or decrease their level.
Some selections, for example, Off timer, allow a choice to be made.
Some selections, for example Tuning menu, will lead to a further menu.

MENU

The MENU button is used to open the main menu and also to return to the previous
menu.

The up and down cursor buttons are used to move the cursor up and down the me­nus.

The left and right cursor buttons are used to access menus, adjust levels or to select
from a range of options.

The OK button is used to store and confirm tuning, OSD functions and other settings

The EXIT button is used to exit the menu system and return to the normal viewing
screen.

N (Normalise) button --- resets all settings to their default levels

EXIT

Last Position Memory

Certain functions have a last position memory, i.e. the setting at the time of switch-- off will be the
setting used when the receiver is switched on again.

17