PANASONIC TX-24DW334 User Manual

OPERATING INSTRUCTIONS

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

KULLANIM KILAVUZU

ISTRUZIONI DI FUNZIONAMENTO

HANDLEIDING

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ

TX-24DW334

COLOUR TELEVISION WITH REMOTE CONTROL

TÉLÉVISEUR COULEUR AVEC TÉLÉCOMMANDE

FARB-TV-GERÄT MIT FERNBEDIENUNG

UZAKTAN KUMANDALI RENKLİ TELEVİZYON

TELEVISIONE A COLORI CON TELECOMANDO

TELEVISIE MET AFSTANDSBEDIENING

ЖК-ТЕЛЕВИЗОР

Contents

Safety Information ..................................................2

Markings on the Product.........................................2

Maintenance ...........................................................3

Assembling / Removing the pedestal ..................... 4

When using the wall-hanging bracket.....................4

Environmental Information......................................4

Features .................................................................5

Accessories Included..............................................5

Standby Notications .............................................. 5

TV Control Switch & Operation...............................5

Inserting the Batteries into the Remote .................. 6

Connect Power ...................................................... 6

Antenna Connection ............................................... 6

Notication ..............................................................6

Specication ...........................................................7

Remote Control ......................................................8

Connections............................................................9

Switching On/Off ...................................................10

First Time Installation............................................10

Media Playback via USB Input ............................. 11

Media Player Menu............................................... 11

CEC and CEC RC Passthrough ........................... 11

TV Menu Contents................................................12

General TV Operation ..........................................16

Using the Channel List .........................................16

Conguring Parental Settings ............................... 16

Electronic Programme Guide (EPG) ....................16

Teletext Services .................................................. 17

Software Upgrade.................................................17

Troubleshooting & Tips .........................................17

PC Input Typical Display Modes ...........................18

AV and HDMI Signal Compatibility .......................18

Supported Video File Formats for USB Mode ......19

Supported Picture File Formats for USB Mode .... 19

Supported Audio File Formats for USB Mode ......20

Supported Subtitle File Formats for USB Mode ...21

Supported DVI Resolutions .................................. 22

English - 1 -

Safety Information

i

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO

NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.

Don’t operate your TV in extreme ambient
conditions as this may cause damage to your TV.

In extreme weather (storms, lightning) and long
inactivity periods (going on holiday) disconnect
the TV set from the mains. The mains plug is
used to disconnect TV set from the mains and
therefore it must remain readily operable.

This sign is present wherever there is very
important information on operation and
maintenance of the appliance in the literature

Note: Follow the on screen instructions for operating the
related features.

accompanying it.

IMPORTANT - Please read these
instructions fully before installing or
operating

WARNING: Never let people (including
children) with reduced physical, sensory or
mental capabilities or lack of experience and / or
knowledge use electrical devices unsupervised.

• For ventilation purposes, leave a free space of at

least 10 cm all around the set.

• Do not block ventilation holes.

• Do not place the TV on sloping or unstable surfaces,

the TV may tip over.

• Use this device in moderate climates.

• The power cord plug should be easily accessible. Do

not place the TV, furniture, etc. on the power cord.

A damaged power cord/plug can cause re or give

you an electric shock. Handle the power cord by the
plug, do not unplug the TV by pulling the power cord.
Never touch the power cord/plug with wet hands
as this could cause a short circuit or electric shock.
Never make a knot in the power cord or tie it with
other cords. When damaged it must be replaced,

this should only be done by qualied personnel.

• Do not use this TV in a humid or damp environment.

Do not expose the TV to liquids. In case the cabinet
contacts any liquids unplug the TV immediately

and have it checked by qualied personnel before

operating it any further.

• Do not expose the TV to direct sunlight,

open ames or place it near intense heat

sources such as electric heaters.

• Listening in excessive volumes from earphones and

headphones may cause hearing loss.

English - 2 -

• Ensure that no open ame sources, such as lit

candles, are placed on top of the TV.

• To prevent injuries, this TV must be securely
attached to a wall by carefully following the
instructions (if the option is available).

• Occasionally, a few non-active pixels may appear
on the screen as a xed blue, green or red point.

Please note that this does not affect the performance
of your product. Take care not to scratch the screen

with ngernails or other hard objects.

• Before cleaning, unplug the TV from the wall socket.

Only use a soft, dry cloth while cleaning.

Warning: Batteries must not be exposed to excessive

heat such as sunshine, re or the like.

Warning

Risk of electric shock

Caution

Important

Notice

Serious injury or death risk

Dangerous voltage risk

Injury or property damage risk

Operating the system correctly

Additional notes marked

Markings on the Product

The following symbols are used on the product as
a marker for restrictions and precautions and safety
instructions. Each explanation shall be considered
where the product bears related marking only. Note
such information for security reasons.

Class II Equipment: This appliance is
designed in such a way that it does not require
a safety connection to electrical earth.

Class II Equipment With Functional
Earthing: This appliance is designed in such

a way that it does not require a safety
connection to electrical earth, the earth connection is
used for functional purposes.

Protective Earth Connection: The marked
terminal is intended for connection of the
protective earthing conductor associated with

the supply wiring.

Hazardous Live Terminal: The marked
terminal(s) is/are hazardous live under normal
operating conditions.

Caution, See Operating Instructions: The
marked area(s) contain(s) user replaceable
coin or button cell batteries.

Class 1 Laser Product:

CLASS 1
LASER PRODUCT

This product contains Class
1 laser source that is safe
under reasonably foreseeable
conditions of operation.

WARNING

Do not ingest the battery, Chemical Burn

Hazard

(The accessories supplied with or) This pro-

duct may contain a coin/button cell battery.

If the coin/button cell battery is swallowed,
it can cause severe internal burns in just 2

hours and can lead to death.

Keep new and used batteries away from

children.

If the battery compartment does not close

securely, stop using the product and keep it

away from children.

If you think batteries might have been swal-

lowed or placed inside any part of the body,

seek immediate medical attention.

WARNING

Never place a television set in an unstable

location. A television set may fall, causing

serious personal injury or death. Many inju-

ries, particularly to children, can be avoided

by taking simple precautions such as;

• Using cabinets or stands recommended by
the manufacturer of the television set.

• Only using furniture that can safely support
the television set.

• Ensuring the television set is not overhanging
the edge of the supporting furniture.

• Not placing the television set on all furniture
(for example, cupboards or bookcases)
without acnhoring both the furniture and the
television set to a suitable support.

• Educating children about the dangers of
climbing on furniture to reach the television
set or its controls.

If your existing television set is being retained and
relocated, the same considerations as above should
be applied.

Maintenance

First, remove the mains plug from the mains
socket.

Display panel, Cabinet, Pedestal

Regular care:

Gently wipe the surface of the display panel, cabinet,
or pedestal by using a soft cloth to remove dirt or

ngerprints.

For stubborn dirt:

1. First clean the dust from the surface.

2. Dampen a soft cloth with clean water or diluted

neutral detergent (1 part detergent to 100 parts
water).

3. Wring out the cloth rmly. (Please note, do not

let liquid enter the TV inside as it may lead to
product failure.)

4. Carefully wipe moisten and wipe away the

stubborn dirt.

5. Finally, wipe away all the moisture.
Caution

Do not use a hard cloth or rub the surface too hard,
otherwise this may cause scratches on the surface.

• Take care not to subject the surfaces to insect
repellent, solvent, thinner or other volatile
substances. This may degrade surface quality or
cause peeling of the paint.

• The surface of the display panel is specially treated
and may be easily damaged. Take care not to tap

or scratch the surface with your ngernail or other

hard objects.

• Do not allow the cabinet and pedestal to make
contact with a rubber or PVC substance for a long
time. This may degrade surface quality.

Mains plug

Wipe the mains plug with a dry cloth at regular
intervals.

Moisture and dust may cause re or electrical shock.

English - 3 -

Assembling / Removing the pedestal

Preparations

Take out the pedestal and the TV from the packing
case and put the stand onto a work table or any other
even surface.

• Use a at and rm table or similar even surface that

can support the weight of the TV.

• Do not hold the screen panel part.

• Make sure not to scratch or break the TV.

Assembling the pedestal

1. Place the stand on the table or similar even

surface.

2. Hold the TV over the stand so that it coincides

with the stand mouinting point and then lower it
to be mounted with its own weight. If the stand

is not tted properly, gently press down until the

latch/es snap/s into place.

When using the wall-hanging bracket

Please contact your local Panasonic dealer to
purchase the recommended wall-hanging bracket.

Holes for wall-hanging bracket installation;

Rear of the TV

a

b

a (mm) 75

b (mm) 75

View from the side

a

Removing the pedestal from the TV

Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking
the TV.

• Put the TV onto a work table with the screen panel
down on the clean and soft cloth. Leave the stand
protruding over the edge of the surface.

• Press the button/s to release the latch/es.

• Remove the stand by pulling it away from the TV.

English - 4 -

Depth of
screw (a)

min. (mm) 5

max. (mm) 7

Diameter M4

Note: The screws for xing the TV onto the wall-hanging
bracket are not supplied with the TV.

Environmental Information

This television is designed to be environment friendly.
To reduce energy consumption, you can follow these
steps:

If you set the Energy Saving to Minimum, Medium,
Maximum or Auto the TV will reduce the energy
consumption accordingly. If you like to set the
Backlight to a xed value set as Custom and adjust
the Backlight (located under the Energy Saving
setting) manually using Left or Right buttons on the
remote. Set as Off to turn this setting off.

Note: Available Energy Saving options may differ depending
on the selected Mode in the Picture menu.

The Energy Saving settings can be found in the
Picture menu. Note that some picture settings will

be unavailable to be changed.

If pressed Right button while Auto option is selected or
Left button while Custom option is selected, “Screen
will be off in 15 seconds.” message will be displayed
on the screen. Select Proceed and press OK to turn
the screen off immediately. If you don’t press any
button, the screen will be off in 15 seconds. Press
any button on the remote or on the TV to turn the
screen on again.

Note: Screen Off option is not available if the Mode is set
to Game.

When the TV is not in use, please switch off or
disconnect the TV from the mains plug. This will also
reduce energy consumption.

Features

• Remote controlled colour TV

• Fully integrated digital terrestrial/cable/satellite TV

(DVB-T-T2/C/S-S2)

• HDMI inputs to connect other devices with HDMI

sockets

• USB input

• OSD menu system

• Scart socket for external devices (such as DVD

Players, PVR, video games, etc.)

• Stereo sound system

• Teletext

• Headphone connection

• Automatic programming system

• Manual tuning

• Automatic power down after up to eight hours.

• Sleep timer

• Child lock

• Automatic sound mute when no transmission.

• NTSC playback

• AVL (Automatic Volume Limiting)

• PLL (Frequency Search)

• PC input

• Game Mode (Optional)

• Picture off function

Accessories Included

• Remote Control

• Batteries: 2 x AA

• Instruction Book

• Detachable stand

Standby Notications

If the TV does not receive any input signal (e.g. from
an aerial or HDMI source) for 5 minutes, it will go

into standby. When you next switch-on, the following
message will be displayed: “TV switched to stand-by

mode automatically because there was no signal
for a long time.” Press OK to continue.

If the TV is on and it isn’t being operated for a while
it will go into standby. When you next switch-on, the
following message will be displayed. “TV switched to

stand-by mode automatically because no operation
was made for a long time.” Press OK to continue.

TV Control Switch & Operation

1. Up direction

2. Down direction

3. Volume / Info / Sources List selection and

Standby-On switch

The Control button allows you to control the Volume
/ Programme / Source and Standby-On functions of
the TV.

To change volume: Increase the volume by pushing
the button up. Decrease the volume by pushing the
button down.

To change channel: Press the middle of the button,
the information banner will appear on the screen.
Scroll through the stored channels by pushing the
button up or down.

To change source: Press the middle of the button
twice(for the second time in total), the source list will
appear on the screen. Scroll through the available
sources by pushing the button up or down.

To turn the TV off: Press the middle of the button
down and hold it down for a few seconds, the TV will
turn into standby mode.

Notes:

• If you turn the TV off, this circle starts again
beginning with the volume setting.

• Main menu OSD cannot be displayed via control
button.

English - 5 -

Operation with the Remote Control

Press the Menu button on your remote control to
display main menu screen. Use the directional buttons
to select a menu tab and press OK to enter. Use the
directional buttons again to select or set an item. Press

Return/Back or Menu button to quit a menu screen.
Input Selection

Once you have connected external systems to your
TV, you can switch to different input sources. Press the
Source button on your remote control consecutively
to select the different sources.

Changing Channels and Volume

You can change the channel and adjust the volume
by using the Volume +/- and Programme +/- buttons
on the remote.

Inserting the Batteries into the Remote

Lift the cover on the back of the remote gently. Insert
two AA batteries. Make sure the (+) and (-) signs
match (observe correct polarity). Place the cover
back on.

Connect Power

IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz socket. After unpacking, allow

the TV set to reach the ambient room temperature
before you connect the set to the mains. Plug the
power cable to the mains socket outlet.

Antenna Connection

Connect the aerial or cable TV plug to the AERIAL
INPUT (ANT) socket or satellite plug to the SATELLITE
INPUT (LNB) socket located on the back of the TV.

satellite

REAR
OF
THE TV

aerial
or
cable

Notication

TRADEMARK ACKNOWLEDGMENT

The terms HDMI and High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC in the
United States and other countries.

Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, and the double-D symbol are
trademarks of Dolby Laboratories.

Disposal of Old Equipment and Batteries

Only for European Union
and countries with recycling
systems

These symbols on the products,
packaging, and/or accompanying
documents mean that used electrical and
electronic products and batteries must
not be mixed with general household
waste.

For proper treatment, recovery and
recycling of old products and batteries,
please take them to applicable collection
points in accordance with your national
legislation.

By disposing of them correctly, you will
help to save valuable resouces and
prevent any potential negative effects
on human health and the environment.

For more information about collection
and recycling, please contact your local
municipality.

Penalties may be applicable for incorrect
disposal of this waste, in accordance with
national legislation.

Note for the battery symbol
(bottom symbol):

This symbol might be used in
combination with a chemical symbol.
In this case it complies with the
requirement set by the Directive for the
chemical involved.

English - 6 -

Declaration of Conformity (DoC)

“Hereby, Panasonic Corporation declares that this TV
is in compliance with the essential requirements and
other relevant provisions of the Directive 1999/5/EC.”

If you want to get a copy of the original DoC of this
TV, please visit the following website:

http://www.ptc.panasonic.eu/doc

Authorized Representative:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 11, 22525 Hamburg, Germany

Web Site: http://www.panasonic.com

Specication

TV Broadcasting

Receiving Channels

Digital Reception

Number of Preset
Channels

Channel Indicator On Screen Display

RF Aerial Input 75 Ohm (unbalanced)

Operating Voltage 220-240V AC, 50Hz.

Audio A2 Stereo+Nicam Stereo

Headphone 3.5 mm mini stereo jack

Audio Output Power
(WRMS.) (10% THD)

Power Consumption (W) 45 W

Weight (Kg) 3,5 Kg

TV Dimensions DxLxH
(with foot) (mm)

TV Dimensions DxLxH
(without foot) (mm)

Display 16/9 24”

Operation temperature
and operation humidity

PAL BG/DK/II’
SECAM BG/DK

VHF (BAND I/III) - UHF
(BAND U) - HYPERBAND

Fully integrated digital
terrestrial-cable-satellite
TV(DVB-T-C-S)
(DVB-T2, DVB-S2 compliant)

10 000

2 x 2,5 W

134 x 554 x 372

35/61 x 554 x 339

0ºC up to 40ºC, 85%
humidity max

Notice for DVB / Data broadcasting / IPTV
functions

• This TV is designed to meet the standards (as
of August, 2013) of DVB-T / T2 (MPEG2 and
MPEG4-AVC(H.264)) digital terrestrial services,
DVB-C (MPEG2 and MPEG4-AVC(H.264)) digital
cable services and DVB-S (MPEG2 and MPEG4­AVC(H.264)) digital satellite services.

Consult your local dealer for availability of DVB-T /

T2 or DVB-S services in your area.

Consult your cable service provider for availability

of DVB-C services with this TV.

• This TV may not work correctly with the signal which
does not meet the standards of DVB-T / T2, DVB-C
or DVB-S.

• Not all the features are available depending on the
country, area, broadcaster, service provider, satellite
and network environment.

• Not all CI modules work properly with this TV.
Consult your service provider about the available
CI module.

• This TV may not work correctly with CI module that
is not approved by the service provider.

• Additional fees may be charged depending on the
service provider.

• The compatibility with future services is not
guaranteed.

English - 7 -

Remote Control

B

ACK

EXIT

LANG SUBT

1. Standby: Switches On / Off the TV

2. Text: Displays teletext (where available), press again

to superimpose the teletext over a normal broadcast
picture (mix)

3. Menu: Displays TV menu

4. Media player: Opens the media player screen

5. Info: Displays information about on-screen content,

shows hidden information (reveal - in TXT mode)

6. Directional buttons: Helps navigate menus, content

etc. and displays the subpages in TXT mode when
pressed Right or Left

In media player mode;
Left: Rapid reverse
Right: Rapid advance

7. OK: Conrms user selections, holds the page (in TXT

mode), views channel list (DTV mode), Pause (in media
player mode)

8. Quick Menu: Displays a list of menus for quick access

9. Coloured Buttons: Follow the on-screen instructions

for accurate functions of the coloured button

In media player mode;
Red: Stop / Play
Green: Play / Jump

Yellow: Pause / Subtitle time correction

Blue: Stop

10. Screen: Changes the aspect ratio of the screen

11. Volume +/-

12. Numeric buttons: Switches the channel, enters a

number or a letter in the text box on the screen, switches
the TV on when in standby mode.

13. TV: Displays channel list / Switches to TV Source

14. Swap: Quickly cycles between previous and current

channels or sources

15. Mute: Completely turns off the volume of the TV

16. Programme +/-: Programme up-down, Page up-down (in

TXT mode), switches the TV on when in standby mode

17. Back/Return: Returns to previous screen, opens index

page (in TXT mode)

18. Exit: Closes and exits from displayed menus or returns

to previous screen

19. Language: Switches between sound modes (analogue

TV), displays and changes audio/subtitle language
(digital TV, where available)

20. Subtitles: Turns subtitles on and off (where available)

21. EPG (Electronic programme guide): Displays the

electronic programme guide

22. Source: Shows all available broadcast and content

sources

English - 8 -

Connections

Connector Type Cables Device

Scart

Connection

(back)

VGA

Connection

(back)

SIDE AV

SPDIF

SIDE AV

HEADPHONE

YPBPR

PC/YPbPr

Audio

Connection

(side)

HDMI

Connection

(back)

SPDIF

(Coaxial Out)

Connection

(back)

Side AV

(Audio/Video)

Connection

(side)

Headphone
Connection

(side)

YPbPr Video

Connection

(back)

USB

Connection

(side)

YPbPr/PC Audio Cable

AV Cable

PC to YPbPr Connection Cable

NOTE: When connecting
a device via the YPbPr or Side
AV input, you must use the
connection cables to enable
connection. See the illustrations

on the left side. | You can use

YPbPr to VGA cable to enable
YPbPr signal via VGA input. |
You cannot use VGA and YPbPr

at the same time. | To enable
PC/YPbPr audio, you will need
to use the side audio inputs
with a YPbPr/PC audio cable
for audio connection. | If an

external device is connected via
the SCART socket, the TV will
automatically switch to AV mode.|
When receiving DTV channels

(Mpeg4 H.264) or while in Media
Player mode, output will not be
available via the scart socket. |
When using the wall mounting
kit (available from third party
in the market, if not supplied),
we recommend that you plug all
your cables into the back of the

TV before mounting on the wall.

| Insert or remove the CI module

only when the TV is SWITCHED

OFF. You should refer to the
module instruction manual for

details of the settings. | The/Each
USB input of your TV supports

devices up to 500mA. Connecting
devices that have current value
above 500mA may damage your

TV. | By connecting an HDMI cable
to your TV, you have to use only a

shielded HDMI cable to guarantee
a sufficient immunity against
parasitic frequency radiation.

CI

Connection

(side)

CAM

module

If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making
any connection. After the connection is done, you can turn on the units and use them.

English - 9 -

Switching On/Off

To Switch the TV On

Connect the power cord to a power source such as a
wall socket (220-240V AC, 50 Hz). Switch the “
button on the TV(switch position may differ depending
on the model) to position “|” so the TV will switch into
standby mode. Then the standby LED lights up.

To switch on the TV from standby mode either:

• Press the Standby button, Programme +/- or a

numeric button on the remote control.

• Press the side function switch on the TV until the TV
comes on from standby.

To Switch the TV Off

Press the Standby button on the remote control or
press the side function switch on the TV until the TV
switches into standby mode.

Switch the “

illustrated -

, switch is used for turning the TV on or off.

Note:

The position of the power switch may differ depending

on the model.

To power down the TV completely, unplug the
power cord from the mains socket.

Note: When the TV is switched into standby mode, the
standby LED can blink to indicate that features such as

Standby Search, Over Air Download or Timer is active. The

LED can also blink when you switch on the TV from standby

mode.

First Time Installation

When turned on for the first time, the language
selection screen is displayed. Select the desired
language and press OK.

On the next screen, set your preferences using the
directional buttons.

Note: Depending on the Country selection you may be asked

to set and conrm a PIN at this point. The selected PIN cannot
be 0000. You have to enter it if you are asked to enter a PIN

for any menu operation later.

” button on the TV to position 2 as

, so the TV will switch off.

About Selecting Broadcast Type

Digital Aerial: If Digital Aerial broadcast search

option is turned on, the TV will search for digital
terrestrial broadcasts after other initial settings are

”

completed.
Digital Cable: If Digital Cable broadcast search

option is turned on, the TV will search for digital cable
broadcasts after other initial settings are completed.

According to your other preferences a conrmation

message may be displayed before starting to search.
Select YES and press OK to proceed. To cancel
operation, select NO and press OK. You can select

Network or set values such as Frequency, Network
ID and Search Step. When nished, press OK button.

Note: Searching duration will change depending on the
selected Search Step.

Satellite: If Satellite broadcast search option is
turned on, the TV will search for digital satellite
broadcasts after other initial settings are completed.
Before satellite search is performed some settings
should be made. Antenna Type menu will be

displayed rst. You can select Antenna Type as
Direct, Single Satellite Cable or DiSEqC switch by

using “ ” or “ ” buttons.

• Direct: If you have a single receiver and a direct
satellite dish, select this antenna type. Press OK to
continue. Select an available satellite on the next
screen and press OK to scan for services.

• Single Satellite Cable: If you have multiple
receivers and a single satellite cable system, select
this antenna type. Press OK to continue. Congure
settings by following instructions on the next screen.
Press OK to scan for services.

• DiSEqC switch: If you have multiple satellite dishes
and a DiSEqC switch, select this antenna type.
Press OK to continue. You can set four DiSEqC
options (if available) on the next screen. Press OK

button to scan the rst satellite in the list.

Analogue: If Analogue broadcast search option is
turned on, the TV will search for analogue broadcasts
after other initial settings are completed.

Additionally you can set a broadcast type as your
favourite one. Priority will be given to the selected
broadcast type during the search process and the
channels of it will be listed on the top of the Channel
List. When nished, press OK to continue.

You can activate Store Mode option at this point.

This option will congure your TV’s settings for store

environment and depending on the TV model being
used, the supported features of it may be displayed
on the top of the screen as an info banner. This option
is intended only for store use. It is recommended to
select Home Mode for home use. This option will be
available in Setup>More menu and can be turned
off/on later.

English - 10 -

Press OK button on the remote control to continue.
After the initial settings are completed TV will start
to search for available broadcasts of the selected
broadcast types.

After all the available stations are stored, scan results
will be displayed. Press OK to continue. The Edit
Channel List menu will be displayed next. You can
edit the channel list according to your preferences or
press the Menu button to quit and watch TV.

While the search continues a message may appear,
asking whether you want to sort channels according
to the LCN(*). Select Yes and press OK to conrm.

(*) LCN is the Logical Channel Number system that organizes
available broadcasts in accordance with a recognizable

channel number sequence (if available).

Note: Do not turn off the TV while initializing first time
installation. Note that, some options may not be available

depending on the country selection.

Media Playback via USB Input

You can connect 2.5” and 3.5” inch (hdd with external power
supply) external hard disk drives or USB memory stick to your
TV by using the USB inputs of the TV.

IMPORTANT! Back up the les on your storage devices

before connecting them to the TV. Manufacturer will

not be responsible for any le damage or data loss.

Certain types of USB devices (e.g. MP3 Players)
or USB hard disk drives/memory sticks may not be
compatible with this TV. The TV supports FAT32 and
NTFS disk formatting.

Wait a little while before each plugging and unplugging

as the player may still be reading les. Failure to do

so may cause physical damage to the USB player
and the USB device itself. Do not pull out your drive

while playing a le.

You can use USB hubs with your TV’s USB inputs.
External power supplied USB hubs are recommended
in such a case.

It is recommended to use the TV’s USB input(s)
directly, if you are going to connect a USB hard disk.

Note: When viewing image les the Media Player menu
can only display 1000 image les stored on the connected

USB device.

Media Player Menu

You can play photo, music and movie les stored

on a USB disk by connecting it to your TV. Connect
a USB disk to one of the USB inputs located on the
side of the TV. Pressing the Menu button while in the
Media Player mode will access the Picture, Sound
and Setup menu options. Pressing the Menu button

again will exit from this screen.

You can set your

Media Player preferences by using the Setup menu.

Loop/Shufe Mode Operation

Start playback with the Green
button and activate

All les in the list will be

continuously played in original
order

English - 11 -

Start playback with the OK
button and activate

Start playback with the Green
button and activate

Start playback with the Green
button and activate

The same le will be played

continuously (repeat)

All les in the list will be

played once in random order

All les in the list will be

continuously played in the

,

same random order.

CEC and CEC RC Passthrough

This function allows to control the CEC-enabled
devices, that are connected through HDMI ports by
using the remote control of the TV.

The CEC option in the Setup>More menu should be
set as Enabled at rst. Press the Source button and
select the HDMI input of the connected CEC device
from the Sources List menu. When new CEC source
device is connected, it will be listed in source menu
with its own name instead of the connected HDMI
ports name(such as DVD Player, Recorder 1 etc.).

The TV remote is automatically able to perform the
main functions after the connected HDMI source has
been selected.

To terminate this operation and control the TV via
the remote again, press Quick Menu button on the
remote, highlight the CEC RC Passthrough and
set as Off by pressing Left or Right button. This
feature can also be enabled or disabled under the
Setup>More menu.

The TV supports also ARC(Audio Return Channel)
feature. This feature is an audio link meant to replace
other cables between the TV and the audio system
(A/V receiver or speaker system).

When ARC is active, TV does not mute its other audio
outputs automatically. So you need to decrease TV
volume to zero manually, if you want to hear audio
from connected audio device only (same as other
optical or co-axial digital audio outputs). If you want
to change connected device’s volume level, you
should select that device from the source list. In that
case volume control keys are directed to connected
audio device.

Note: ARC is supported only via the HDMI1 input.

System Audio Control

Allows an Audio Amplier/Receiver to be used with

the TV. The volume can be controlled using the
remote control of the TV. To activate this feature set
the Speakers option in the Setup>More menu as
Amplier. The TV speakers will be muted and the
sound of the watched source will be provided from
the connected sound system.

Note: The audio device should support System Audio Control
feature and CEC option should be set as Enabled.

TV Menu Contents

Colour

Picture Zoom

Skin Tone

Colour Shift

Picture Menu Contents

Mode

Contrast
Brightness
Sharpness

Energy Saving

Backlight

Advanced Settings

Dynamic Contrast

Noise Reduction

Colour Temp

White Point

Film Mode

HDMI Full Range

PC Position

Autoposition
H Position
V Position

Dot Clock

Phase

Reset

While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture
Settings while in PC mode.

You can change the picture mode to suit your preference or requirements. Picture mode can
be set to one of these options: Cinema, Game(optional), Sports, Dynamic and Natural.

Adjusts the light and dark values on the screen.
Adjusts the brightness values on the screen.
Sets the sharpness value for the objects displayed on the screen.
Sets the colour value, adjusting the colours.
For setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto,

Screen Off or Off.

Note: Available options may differ depending on the selected Mode.

This setting controls the backlight level. The backlight function will be inactive if the
Energy Saving is set to an option other then Custom.

You can change the dynamic contrast ratio to desired value.

If the signal is weak and the picture is noisy, use the Noise Reduction setting to reduce
the amount of noise.

Sets the desired colour temperature value. Cool, Normal, Warm and Custom options are
available.

If the Colour Temp option is set as Custom, this setting will be available. Increase the
‘warmth’ or ‘coolness’ of the picture by pressing Left or Right buttons.

Sets the desired image size format.

Films are recorded at a different number of frames per second to normal television programmes.

Turn this feature on when you are watching lms to see the fast motion scenes clearly.

Skin tone can be changed between -5 and 5.

Adjust the desired colour tone.

While watching from a HDMI source, this feature will be visible. You can use this feature to
enhance blackness in the picture.

Appears only when the input source is set to VGA/PC.

Automatically optimizes the display. Press OK to optimize.

This item shifts the image horizontally to the right hand side or left hand side of the screen.

This item shifts the image vertically towards the top or bottom of the screen.

Dot Clock adjustments correct the interference that appear as vertical banding in dot
intensive presentations like spreadsheets or paragraphs or text in smaller fonts.

Depending on the input source(computer etc.) you may see a hazy or noisy picture on the
screen. You can use phase to get a clearer picture by trial and error.

Resets the picture settings to factory default settings (except Game mode).

English - 12 -

Sound Menu Contents

Volume
Equalizer
Balance

Headphone

Sound Mode
AVL (Automatic

Volume Limiting)

Headphone/Lineout

Dynamic Bass
Surround sound
Digital Out

Adjusts the volume level.

Selects the equalizer mode. Custom settings can be made only when in User mode.

Adjusts whether the sound comes from the left or right speaker.

Sets headphone volume.
Please ensure before using headphones that the headphone volume is set to a low

level, to prevent damage to your hearing.

You can select a sound mode (If the viewed channel supports).

Sets the sound to obtain xed output level between programmes.

When you connect an external amplier to your TV using the headphone jack, you

can select this option as Lineout. If you have connected headphones to the TV, set
this option as Headphone.

Please ensure before using headphones that this menu item is set to Headphone.
If it is set to Lineout, the output from the headphone socket will be set to maximum
which could damage your hearing.

Enables or disables the Dynamic Bass.

Surround sound mode can be changed as On or Off.

Sets digital out audio type.

English - 13 -

Setup Menu Contents

Conditional Access

Accessibility

Menu Timeout

Language

Parental

Timers

Date/Time
Sources

Hard of Hearing

Audio
Description

More

Software
Upgrade

Application
Version

Subtitle Mode

Auto TV OFF

Biss Key

Store Mode

Power Up Mode

CEC

CEC Auto Power
On

Speakers

Controls conditional access modules when available.
You may set a different language depending on the broadcaster and the country.
Enter correct password to change parental settings. You can easily adjust Menu

Lock, Maturity Lock, Child Lock or Guidance in this menu. You can also set a
new PIN or change the Default CICAM PIN using the related options.

Note: Some menu options may not be available depending on the country selection in the First Time
Installation. Default PIN can be set to 0000 or 1234. If you have dened the PIN(is requested depending on

the country selection) during the First Time Installation use the PIN that you have dened.

Sets sleep timer to turn off the TV after a certain time. Sets timers for selected
programmes.

Sets date and time.
Enables or disables selected source options.
Displays accessibility options of the TV.
Enables any special feature sent from the broadcaster.
A narration track will be played for the blind or visually impaired audience. Press OK

to see all available Audio Description menu options. This feature is available only if
the broadcaster supports it.

Displays other setting options of the TV.
Changes timeout duration for menu screens.

Ensures that your TV has the latest rmware. Press OK to see the menu options.

Displays current software version.

This option is used to select which subtitle mode will be on the screen (DVB subtitle /
Teletext subtitle) if both is available. Default value is DVB subtitle. This feature is available
only for the country option of Norway.

Sets the desired time for the TV to automatically go into standby mode when not
being operated.

Biss is a satellite signal scrambling system that is used for some broadcasts. If you need to enter
Biss key on a broadcast, you can use this setting. Highlight Biss Key and press OK to enter
keys on the desired broadcast.

Select this mode for store display purposes. Whilst Store Mode is enabled, some
items in the TV menu may not be available.

This setting congures the power up mode preference. Last State and Standby
options are available.

With this setting you can enable and disable CEC functionality completely. Press Left
or Right button to enable or disable the feature.

This function allows the connected HDMI-CEC compatible device to turn on the TV
and switch to its input source automatically. Press Left or Right button to enable or
disable the feature.

To hear the TV audio from the connected compatible audio device set as Amplier.
You can use the remote control of the TV to control the volume of the audio device.

English - 14 -

Installation Menu Contents

Automatic

channel scan

installation

channel scan
(Retune)

Manual

Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB stations.
Digital Cable: Searches and stores cable DVB stations. Analogue: Searches and stores

analogue stations. Satellite: Searches and stores satellite stations.

This feature can be used for direct broadcast entry.

Network
channel scan

Analogue ne

tune

Satellite
Settings

Installation
Settings

Clear Service
List

Select Active
Network

First time

Searches for the linked channels in the broadcast system. Digital Aerial: Searches for aerial
network channels. Digital Cable: Searches for cable network channels.

You can use this setting for ne tuning analogue channels. This feature is not available if no

analogue channels are stored.

Displays satellite settings. Satellite list: Displays available satellites. You can Add, Delete
satellites or Edit satellite settings on the list. Antenna installation: You can change satellite
anntenna settings and/or start a satellite scan.

Displays installation settings menu. Standby Search (Optional): Your TV will search for new
or missing channels while in standby. Any new found broadcasts will be shown.

Use this setting to clear channels stored. This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.

This setting allows you to select only the broadcasts within the selected network to be listed
in the channel list. This feature is available only for the country option of Norway.

Deletes all stored channels and settings, resets TV to factory settings.

English - 15 -

General TV Operation

Using the Channel List

The TV sorts all stored stations in the Channel List.
You can edit this channel list, set favourites or set
active stations to be listed by using the Channel List
options. Press the OK/TV button to open the Channel

List. You can lter the listed channels by pressing the
Blue button or open the Edit Channel List menu by

pressing the Green button in order to make advanced
changes in the current list.

Managing the Favourite Lists

You can create four different lists of your favourite
channels. Enter the Channel List in the main menu
or press the Green button while the Channel List
is displayed on the screen in order to open the Edit
Channel List menu. Select the desired channel on
the list. You can make multiple choices by pressing
the Yellow button. Then press the OK button to open
the Channel Edit Options menu and select Add/
Remove Favourites option. Press the OK button
again. Set the desired list option to On. The selected
channel/s will be added to the list. In order to remove
a channel or channels from a favourite list follow the
same steps and set the desired list option to Off.

You can use the Filter function in the Edit Channel

List menu to lter the channels in the Channel list

permanently according to your preferences. Using this
Filter option, you can set one of your four favourite
lists to be displayed everytime the Channel list is

opened. The ltering function in the Channel list
menu will only lter the currently displayed Channel
list in order to nd a channel and tune in to it. This

changes will not remain the next time the Channel
list is opened.

Conguring Parental Settings

The Parental Settings menu options can be used to
prohibit users from viewing of certain programmes,
channels and using of menus. These settings are
located in the Setup>Parental menu.

To display parental lock menu options, a PIN number
should be entered. After coding the correct PIN
number, Parental Settings menu will be displayed.

Menu Lock: This setting enables or disables access
to all menus or installation menus of the TV.

Maturity Lock: If this option is set, TV gets the
maturity information from the broadcast and if this
maturity level is disabled, disables access to the
broadcast.

Note: If the country option in the First Time Installation is
set as France, Italy or Austria, Maturity Lock’s value will be
set to 18 as default.

Child Lock: If this option is set to ON, the TV can only
be controlled by the remote control. In this case the
control buttons on the TV will not work.

English - 16 -

Set PIN: Denes a new PIN number.
Default CICAM PIN: This option will appear as greyed

out if no CI module is inserted into the CI slot of the
TV. You can change the default PIN of the CI CAM
using this option.

Note: Default PIN can be set to 0000 or 1234. If you have
defined the PIN(is requested depending on the country
selection) during the First Time Installation use the PIN that
you have dened.

Some options may not be available depending on the country
selection in the First Time Installation.

Electronic Programme Guide (EPG)

Some channels send information about their
broadcast schedules. Press the Epg button to view
the Programme Guide menu.

There are 3 different types of schedule layouts
available, Timeline Schedule, List Schedule and
Now/Next Schedule. To switch between them follow
the instructions on the bottom of the screen.

Timeline Schedule

Zoom (Yellow button): Press the Yellow button to
see events in a wider time interval.

Filter (Blue button): Views ltering options.
Select Genre (Subtitles button): Displays Select
Genre menu. Using this feature, you can search the

programme guide database in accordance with the
genre. Info available in the programme guide will be
searched and results matching your criteria will be
highlighted.

Options (OK button): Displays event options.
Event Details (Info button): Displays detailed

information about selected events.
Next/Prev Day (Programme +/- buttons): Displays
the events of previous or next day.

Search (Text button): Displays Guide Search menu.
Now (Swap button): Displays current event of the

highlighted channel.

List Schedule(*)

(*) In this layout option, only the events of the highlighted
channel will be listed.

Prev. Time Slice (Red button): Displays the events
of previous time slice.
Next/Prev Day (Programme +/- buttons): Displays
the events of previous or next day.
Event Details (Info button): Displays detailed
information about selected events.

Filter (Text button): Views ltering options.
Next Time Slice (Green button): Displays the events

of next time slice.

Options (OK button): Displays event options.

Now/Next Schedule

Navigate (Directional buttons): Press the
Directional buttons to navigate through the channels

and events.

Options (OK button): Displays event options.

Event Details (Info button): Displays detailed

information about selected events.

Filter (Blue button): Views ltering options.

Event Options

Use the directional buttons to highlight an event and
press OK button to display Event Options menu. The
following options are available.

Select Channel: Using this option, you can switch to
the selected channel.
Set Timer on Event / Delete Timer on Event: After
you have selected an event in the EPG menu, press the
OK button. Select Set Timer on Event option and press
the OK button. You can set a timer for future events.
To cancel an already set timer, highlight that event and
press the OK button. Then select Delete Timer on
Event option. The timer will be cancelled.

Notes: You cannot switch to any other channel or source while
there is an active timer on the current channel.

It is not possible to set timer for two or more individual events
at the same time interval.

Teletext Services

Press the Text button to enter. Press again to activate
mix mode, which allows you to see the teletext page
and the TV broadcast at the same time. Press once
more to exit. If available, sections in the teletext pages
will become colour-coded and can be selected by
pressing the coloured buttons. Follow the instructions
displayed on the screen.

Digital Teletext

Press the Text button to view digital teletext
information. Operate it with the coloured buttons,
cursor buttons and the OK button. The operation
method may differ depending on the contents of the
digital teletext. Follow the instructions displayed on
the digital teletext screen. When the Text button is
pressed again, the TV returns to television broadcast.

Software Upgrade

Your TV is capable of nding and updating the rmware

automatically via the broadcast signal.

Software upgrade search via user interface

On the main menu select Setup and press the OK
button. Setup Menu will be displayed. Then select

More and press the OK button. Navigate to Software
upgrade and press the OK button. In Upgrade
options menu select Scan for upgrade and press
OK button to check for a new software upgrade.

If a new upgrade is found, it starts to download
the upgrade. After the download is completed
confirm the question asking about rebooting the
TV by pressing the OK to continue with the reboot
operation.

3 AM search and upgrade mode

Your TV will search for new upgrades at 3:00 o’clock if

Automatic scanning option in the Upgrade options

English - 17 -

menu is set to Enabled and if the TV is connected
to an aerial signal. If a new software is found and
downloaded successfully, it will be installed at the
next power on.

Note: Do not unplug the power cord while led is blinking

during the reboot process. If the TV fails to come on after the

upgrade, unplug, wait for two minutes then plug it back in.

Troubleshooting & Tips

Tv will not turn on

Make sure the power cord is plugged in securely to
wall outlet. Check if batteries are exhausted. Press
the Power button on the TV.

Poor picture

• Check if you have selected the correct TV system.

• Low signal level can cause picture distortion. Please

check antenna access.

• Check if you have entered the correct channel

frequency if you have done manual tuning.

• The picture quality may degrade when two devices

are connected to the TV at the same time. In such
a case, disconnect one of the devices.

No picture

• This means your TV is not receiving any transmission.

Make sure the correct source has been selected.

• Is the antenna connected properly?

• Is the antenna cable damaged?

• Are suitable plugs used to connect the antenna?

• If you are in doubt, consult your dealer.

No sound

• Check if the TV is muted. Press the Mute button or

increase the volume to check.

• Sound may be coming from only one speaker. Check

the balance settings from Sound menu.

Remote control - no operation

• The batteries may be exhausted. Replace the

batteries.

Input sources - can not be selected

• If you cannot select an input source, it is possible

that no device is connected. If not;

• Check the AV cables and connections if you are

trying to switch to the input source dedicated to the
connected device.

PC Input Typical Display Modes

Source

Supported Signals

Available

The following table is an illustration of some of the
typical video display modes. Your TV may not support
all resolutions.

Index Resolution Frequency

1 640x350 85Hz
2 640x400 70Hz
3 640x480 60Hz
4 640x480 66Hz
5 640x480 72Hz
6 640x480 75Hz
7 640x480 85Hz
8 800x600 56Hz

9 800x600 60Hz
10 800x600 70Hz
11 800x600 72Hz
12 800x600 75Hz
13 800x600 85Hz
14 832x624 75Hz
15 1024x768 60Hz
16 1024x768 66Hz
17 1024x768 70Hz
18 1024x768 72Hz
19 1024x768 75Hz
20 1024x768 85Hz
21 1152x864 60Hz
22 1152x864 70Hz
23 1152x864 75Hz
24 1152x864 85Hz
25 1152x870 75Hz
26 1280x768 60Hz
27 1360x768 60Hz
28 1280x768 75Hz
29 1280x768 85Hz
30 1280x960 60Hz
31 1280x960 75Hz
32 1280x960 85Hz
33 1280x1024 60Hz
34 1280x1024 75Hz
35 1280x1024 85Hz
36 1400x1050 60Hz
37 1400x1050 75Hz
38 1400x1050 85Hz
39 1440x900 60Hz
40 1440x900 75Hz
41 1600x1200 60Hz
42 1680x1050 60Hz
43 1920x1080 60Hz
44 1920x1200 60Hz

AV and HDMI Signal Compatibility

PAL O

EXT
(SCART)

SECAM O
NTSC4.43 O
NTSC3.58 O
RGB 50/60 O
PAL O

Side AV

SECAM O
NTSC4.43 O
NTSC3.58 O
480i, 480p 60Hz O

YPbPr

576i, 576p 50Hz O
720p 50Hz,60Hz O
1080i 50Hz,60Hz O
480i, 480p 60Hz O
576i, 576p 50Hz O
720p 50Hz,60Hz O

HDMI

1080i 50Hz,60Hz O

24Hz,
25Hz,

1080p

30Hz,

O
50Hz,
60Hz

(X: Not Available, O: Available)

In some cases a signal on the TV may not be displayed
properly. The problem may be an inconsistency with
standards from the source equipment (DVD, Set-top
box, etc. ). If you do experience such a problem please
contact your dealer and also the manufacturer of the
source equipment.

English - 18 -

Supported Video File Formats for USB Mode

Extension Video Codec SPEC (Resolution) & Bit Rate

.dat, vob MPEG1/2

.mpg, .mpeg

.ts, .trp, .tp

.mp4, .mov,
.3gpp, .3gp

.avi MPEG1/2,

.mkv MPEG1/2,

.asf Sorenson H.263,

.v WMV3 1080P@30fps - 40 Mbps
.swf RV30/RV40 1080P@30fps - 40 Mbps
.wmv

MPEG1/2,
MPEG4

MPEG1/2, H.264,
AVS, MVC

MPEG1/2,
MPEG4, H.263,
H.264, Motion
JPEG

MPEG4,
Sorenson H.263,
H.263, H.264,
WMV3, Motion
JPEG

MPEG4, H.263,
H.264, WMV3,
Motion JPEG

H.264, WMV3,
Motion JPEG

1080P@30fps - 40 Mbps

H.264: 1080Px2@30fps - 62.5 Mbps, 1080P@60fps - 62.5 Mbps MVC:
1080P@30fps - 62.5 Mbps Other: 1080P@30fps - 40Mbps

H.264: 1080Px2@30fps - 62.5 Mbps, 1080P@60fps - 62.5 Mbps Motion JPEG:
640x480@30fps - 10 Mbps Other: 1080P@30fps - 40 Mbps

Supported Picture File Formats for USB Mode

Image Photo Resolution (width x height)

JPEG

PNG

BMP 9600x6400

Base-line 15360x8640
Progressive 1024x768
non-interlace 9600x6400
interlace 1200x800

English - 19 -

Supported Audio File Formats for USB Mode

Extension

Audio Codec Bit Rate Sample rate

.mp3,

.avi

.asf

.mkv, .mka

.ts, .trp, .tp,
.dat, .vob,
.mpg, .mpeg

MPEG1/2 Layer1 32Kbps ~ 448Kbps

MPEG1/2 Layer3 8Kbps ~ 320Kbps
MPEG1/2 Layer1 32Kbps ~ 448Kbps

MPEG1/2 Layer3 8Kbps ~ 320Kbps
AC3 32Kbps ~ 640Kbps 32KHz, 44.1KHz, 48KHz
AAC, HEAAC 8KHz ~ 48KHz
WMA 128bps ~ 320Kbps 8KHz ~ 48KHz
WMA 10 Pro M0 < 192kbps 48KHz
WMA 10 Pro M1 < 384kbps 48KHz
WMA 10 Pro M2 < 768kbps 96KHz
LPCM 64Kbps ~ 1.5Mbps 8KHz ~ 48KHz
IMA-ADPCM, MS-

ADPCM
G711 A/mu-law 64Kbps ~ 128Kbps 8KHz
MPEG1/2 Layer1 32Kbps ~ 448Kbps

MPEG1/2 Layer3 8Kbps ~ 320Kbps
WMA 128bps ~ 320Kbps 8KHz ~ 48KHz
WMA 10 Pro M0 < 192kbps 48KHz
WMA 10 Pro M1 < 384kbps 48KHz
WMA 10 Pro M2 < 768kbps 96KHz
MPEG1/2 Layer1 32Kbps ~ 448Kbps

MPEG1/2 Layer3 8Kbps ~ 320Kbps
AC3 32Kbps ~ 640Kbps 32KHz, 44.1KHz, 48KHz
AAC, HEAAC 8KHz ~ 48KHz
WMA 128bps ~ 320Kbps 8KHz ~ 48KHz
WMA 10 Pro M0 < 192kbps 48KHz
WMA 10 Pro M1 < 384kbps 48KHz
WMA 10 Pro M2 < 768kbps 96KHz
VORBIS Up to 48KHz
LPCM 64Kbps ~ 1.5Mbps 8KHz ~ 48KHz
IMA-ADPCM,

MS-ADPCM
G711 A/mu-law 64Kbps ~ 128Kbps 8KHz
FLAC < 1.6Mbps 8KHz ~ 96KHz
MPEG1/2 Layer1 32Kbps ~ 448Kbps

MPEG1/2 Layer3 8Kbps ~ 320Kbps
AC3 32Kbps ~ 640Kbps 32KHz, 44.1KHz, 48KHz
EAC3 32Kbps ~ 6Mbps 32KHz, 44.1KHz, 48KHz
AAC, HEAAC 8KHz ~ 48KHz
LPCM 64Kbps ~ 1.5Mbps 8KHz ~ 48KHz

384Kbps 8KHz ~ 48KHz

384Kbps 8KHz ~ 48KHz

16KHz ~ 48KHzMPEG1/2 Layer2 8Kbps ~ 384Kbps

16KHz ~ 48KHzMPEG1/2 Layer2 8Kbps ~ 384Kbps

16KHz ~ 48KHzMPEG1/2 Layer2 8Kbps ~ 384Kbps

16KHz ~ 48KHzMPEG1/2 Layer2 8Kbps ~ 384Kbps

16KHz ~ 48KHzMPEG1/2 Layer2 8Kbps ~ 384Kbps

English - 20 -

Extension

Audio Codec Bit Rate Sample rate

MPEG1/2 Layer1 32Kbps ~ 448Kbps

.wav

.3gpp, .3gp,
.mp4, .mov,
.m4a

.v

.ac3

.swf MPEG1/2 Layer3 8Kbps ~ 320Kbps 16KHz ~ 48KHz
.ec3 EAC3 32Kbps ~ 6Mbps 32KHz, 44.1KHz, 48KHz

.rm, .rmvb, .ra

.wma, .wmv

.webm VORBIS Up to 48KHz

MPEG1/2 Layer3 8Kbps ~ 320Kbps
LPCM 64Kbps ~ 1.5Mbps 8KHz ~ 48KHz
IMA-ADPCM,

MS-ADPCM
G711 A/mu-law 64Kbps ~ 128Kbps 8KHz
MPEG1/2 Layer3 8Kbps ~ 320Kbps 16KHz ~ 48KHz
AC3 32Kbps ~ 640Kbps 32KHz, 44.1KHz, 48KHz
EAC3 32Kbps ~ 6Mbps 32KHz, 44.1KHz, 48KHz
AAC, HEAAC 8KHz ~ 48KHz
VORBIS Up to 48KHz
LPCM 64Kbps ~ 1.5Mbps 8KHz ~ 48KHz
IMA-ADPCM,

MS-ADPCM
G711 A/mu-law 64Kbps ~ 128Kbps 8KHz
MPEG1/2 Layer3 8Kbps ~ 320Kbps 16KHz ~ 48KHz
AAC, HEAAC 8KHz ~ 48KHz
AC3 32Kbps ~ 640Kbps 32KHz, 44.1KHz, 48KHz
AAC, HEAAC 8KHz ~ 48KHz

AAC, HEAAC 8KHz ~ 48KHz

LBR (cook) 6Kbps ~ 128Kbps

WMA 128bps ~ 320Kbps 8KHz ~ 48KHz
WMA 10 Pro M0 < 192kbps 48KHz
WMA 10 Pro M1 < 384kbps 48KHz
WMA 10 Pro M2 < 768kbps 96KHz

384Kbps 8KHz ~ 48KHz

384Kbps 8KHz ~ 48KHz

Supported Subtitle File Formats for USB Mode

Internal Subtitles

Extension Container Subtitle Code

dat, mpg, mpeg, vob MPG, MPEG DVD Subtitle
ts, trp, tp TS DVB Subtitle

mp4 MP4

mkv MKV

External Subtitles

Extension Subtitle Parser Remark

.srt Subrip
.ssa/ .ass SubStation Alpha
.smi SAMI

.sub

.txt TMPlayer

SubViewer
MicroDVD
DVDSusbtitleSystem
SubIdx (VobSub)

16KHz ~ 48KHzMPEG1/2 Layer2 8Kbps ~ 384Kbps

8KHz, 11.025KHz,

22.05KHz, 44.1KHz

DVD Subtitle
UTF-8 Plain Text

ASS
SSA
UTF-8 Plain Text
VobSub
DVD Subtitle

SubViewer 1.0 & 2.0 Only

English - 21 -

Supported DVI Resolutions

When connecting devices to your TV’s connectors by using DVI converter cable(DVI to HDMI cable - not

supplied), you can refer to the following resolution information.

56Hz 60Hz 66Hz 70Hz 72Hz 75Hz

640x400

640x480

800x600

832x624

1024x768

1152x864

1152x870

1280x768

1360x768

1280x960

1280x1024

1400x1050

1440x900

1600x1200

1680x1050

1920x1080

þ þ þ þ

þ þ þ þ þ

þ þ þ þ þ

þ þ þ

þ þ

þ

þ þ

þ þ

þ þ

þ þ

þ

þ

þ

þ

þ

þ

English - 22 -

Table des matières

Consignes de Sécurité .........................................24

Marquages sur le Produit .....................................24

Entretien ...............................................................26

Fixation / Retrait du Piédestal...............................26

Lors de l'utilisation de l’applique de suspension au

mur .......................................................................27

Informations sur l'environnement .........................27

Fonctions ..............................................................27

Accessoires Inclus ................................................ 28

Mise en Veille .......................................................28

Commutateur de commande et fonctionnement de

la TV .....................................................................28

Insertion des piles dans la télécommande ...........28

Branchement à l'alimentation ..............................29

Branchement de l’antenne....................................29

Notication ............................................................29

Spécications .......................................................30

Télécommande ..................................................... 31

Connexions...........................................................32

Marche/Arrêt .........................................................33

Installation Initiale ................................................. 33

Lecture de média via entrée USB.........................34

Menu Lecteur multimédia ..................................... 34

Serveurs intermédiaires CEC et CEC RC ............ 35

Contenu du menu Téléviseur ...............................36

Fonctionnement Général de la TV ........................40

Utilisation de la Liste de Chaînes ......................... 40

Conguration des Paramètres Parentaux ............40

Guide des Programmes Électroniques (EPG) ...... 40

Services Télétexte ................................................ 41

Mise à Jour du Logiciel ......................................... 41

Résolution des Problèmes et Astuces ..................42

Modes d’afchage Typiques d’une Entrée de PC .42

Compatibilité des Signaux AV et HDMI ................ 43

Formats de chiers vidéo pris en charge pour le

mode USB ............................................................44

Formats de chiers image pris en charge pour le

mode USB ............................................................44

Formats de chiers audio pris en charge pour le

mode USB ............................................................45

Formats de chiers de sous-titrage pris en charge

pour le mode USB ................................................ 46

Résolutions DVI prises en charge ........................ 47

Français - 23 -

Consignes de Sécurité

AVERTISSEMENT

RISQUE D'ÉLECTROCUTION

NE PAS OUVRIR

AVERTISSEMENT : POUR ÉVITER TOUT RISQUE

D’ÉLECTROCUTION, NE RETIREZ PAS LE
COUVERCLE (OU L'ARRIÈRE).
AUCUNE PIÈCE À ENTRETENIR CHEZ SOI ;
VEUILLEZ CONFIER L'ENTRETIEN À UN
PERSONNEL QUALIFIÉ.

Le fait de faire fonctionner votre téléviseur
dans des conditions ambiantes extrêmes peut
l’endommager.

Pendant des phénomènes météorologiques

extrêmes (tempêtes, foudre) et de longues
périodes d'inactivité (aller en vacances),
débranchez le téléviseur du secteur. La prise
d’alimentation est utilisée pour débrancher le
téléviseur de l’alimentation secteur et doit donc
rester facilement accessible.

Ce signal apparaît chaque fois que vous avez
besoin d'importantes informations concernant
le fonctionnement et l'entretien de l'appareil,
contenues dans le manuel fourni.

Remarque : Respectez les consignes à l'écran an d'utiliser

les fonctions y relatives.

IMPORTANT - Veuillez lire attentivement
ces instructions avant d'installer ou de
faire fonctionner votre appareil

AVERTISSEMENT : Ne jamais laisser des

personnes (y compris les enfants) avec des

déciences physiques, sensorielles ou mentales,

ou sans expérience et/ou connaissances de
l'appareil l'utiliser sans supervision.

• Pour la ventilation, laissez un espace d’au moins
10 cm autour du poste.

• Ne bouchez pas les bouches d'aération.

• N'installez pas le téléviseur sur une surface en

pente ou instable, car il risquerait de se renverser.

• Utilisez cet appareil sous des climats modérés.

• Le cordon d'alimentation doit être facilement

accessible. Ne posez pas le téléviseur ou le meuble,
etc, sur le cordon d'alimentation. Un cordon/prise
d'alimentation endommagé(e) peut causer un
incendie ou une électrocution. Tenez le cordon
d'alimentation par la che et évitez de débrancher
le téléviseur en tirant sur le cordon d'alimentation.
Ne touchez jamais le cordon/la prise d’alimentation
avec des mains humides, car cela pourrait causer un
court-circuit ou une électrocution. Ne jamais nouer le
cordon d'alimentation or le laisser s'entrelacer avec
d'autres câbles. Lorsqu’il est endommagé, faites-le

remplacer par un personnel qualié.

• N'utilisez pas cet appareil dans les zones humides

ou moites. N'exposez pas le téléviseur aux liquides.
Si un liquide se verse sur la TV, débranchez
la immédiatement et faites la inspecter par un

technicien qualié avant de l'utiliser à nouveau.

• N'exposez pas la télé aux rayons solaires
ou à des ammes et ne la placez pas à

proximité des sources de chaleur intenses
comme les radiateurs électriques.

• Écouter du son à des volumes excessifs à partir
d'écouteurs et des casques peut entraîner une
perte auditive.

• Veillez à ce qu'aucune source de ammes nues

notamment une bougie allumée, ne soit placée au­dessus du téléviseur.

• Pour éviter toutes blessures, ce téléviseur doit
être solidement fixé à un mur, tout en suivant
attentivement les instructions (si cette option est
disponible).

• Un nombre infime de pixels défectueux peut
apparaître occasionnellement sur l'écran comme

des points xes de couleur bleu, rouge, ou vert.

Veuillez noter que cela n'affecte en aucun cas les
performances de votre produit. Veillez à ne pas

rayer l’écran avec les ongles ou autres objets durs.

• Avant de nettoyer, débranchez le poste TV de la

prise murale. Utilisez uniquement un chiffon doux

et sec pour nettoyer l'appareil.

Avertissement

Risque

d'électrocution

Attention

Important

Remarque

Blessures graves ou risque
de mort

Risque de tension dangereuse

Risque de blessures ou de
dommages matériels

Fonctionnement correct du

système

Remarques supplémentaires

Marquages sur le Produit

Les symboles suivants sont utilisés sur le produit
pour marquer les instructions relatives aux restrictions,
aux précautions et à la sécurité. Chaque explication
se rapporte uniquement à l'endroit du produit portant

le symbole correspondant. Veuillez en tenir compte

pour des raisons de sécurité.

Équipement de classe II : Cet appareil, de
par sa conception, ne nécessite pas de
branchement sécurisé à un système électri-

que de mise à la terre.

Équipement de classe II avec mise à la

terre fonctionnelle : Cet appareil, de par sa
conception, ne nécessite pas de branchement

sécurisé à un système électrique de mise à la terre.

Français - 24 -

Le système de mise à la terre est utilisé pour des

besoins fonctionnels.

Raccordement à une terre de protection :
La borne marquée est destinée au branchement
du conducteur de terre de protection associé

au câblage d'alimentation.

Borne dangereuse sous tension : Les bornes
marquées, dans des conditions normales
d'utilisation, sont dangereuses lorsqu'elles sont

sous tension.

Mise en garde, voir instructions d'utilisa­tion : Les zones marquées contiennent des

i

piles en forme de bouton ou de pièce de

monnaie remplaçables par l'utilisateur.

Produit Laser de Classe

CLASS 1
LASER PRODUCT

blement prévisibles.

1 : Ce produit contient une
source laser de Classe 1
sans danger dans des con­ditions d'utilisation raisonna-

AVERTISSEMENT

N'avalez pas la pile. Les produits chimiques

qui y contenus pourraient vous brûler

Ce produit ou ses accessoires fournis peu-

vent contenir des piles en forme de pièce

de monnaie ou de bouton. L'ingestion d'un

pile bouton peut causer non seulement de

sévères brûlures internes en seulement

2 heures, mais aussi le décès.

Gardez les nouvelles et anciennes piles

hors de portée des enfants.
Si le compartiment à piles ne se ferme pas
correctement, arrêtez d'utiliser le produit et

tenez-le hors de la portée des enfants.

Si, à votre avis, la batterie aurait été avalée

ou logée à l'intérieur du corps, consultez de

toute urgence un médecin.

AVERTISSEMENT

Ne posez jamais le téléviseur sur un sup-

port instable. Le téléviseur pourrait chuter,

et provoquer de graves blessures corpo-

relles, voire la mort. Vous pouvez éviter de

nombreuses blessures, notamment aux

enfants, en prenant des précautions simples

telles que :

• Utiliser de supports recommandés par le
fabricant du téléviseur.

• N'utiliser que des meubles pouvant supporter
le téléviseur sans danger.

• S’assurer que le téléviseur ne déborde pas
le meuble sur lequel il est placé.

• Ne pas placer le téléviseur sur un meuble
(par exemple, armoires ou étagères) sans
xer ledit meuble et le téléviseur sur un

support approprié.

• Sensibiliser les enfants sur les dangers qu’ils
encourent en grimpant sur le meuble pour
atteindre le téléviseur ou ses commandes.

Si votre téléviseur actuel est maintenu et déplacé,
les mêmes mesures citées plus haut doivent être
appliquées.

Français - 25 -

Entretien

Retirez tout d’abord la fiche du cordon

d’alimentation de la prise de courant.

Panneau d'Afchage, Coffret, Piédestal

Entretien régulier :

Essuyez délicatement la surface du panneau
d’afchage, du coffret ou du piédestal à l’aide d’un
chiffon doux pour nettoyer la saleté ou les empreintes.

Pour la saleté tenace :

1. Dépoussiérez d'abord la surface.

2. Imbibez un chiffon doux d'eau pure ou de

détergent neutre dilué (1 volume de détergent
pour 100 volumes d’eau).

3. Puis essorez le chiffon. (Ne laissez pas l'eau ou

le détergent s'introduire dans le téléviseur, au
risque de l'endommager.)

4. À l'aide d'un chiffon humide, nettoyez

délicatement les saletés récalcitrantes.

5. Enn, essuyez toute trace d'humidité.
Attention

N’utilisez pas de chiffon rêche ou ne frottez pas trop
vivement la surface, au risque de l'égratigner.

• Veillez à ne pas appliquer d'insecticide, de
dissolvant, de diluant ou d’autres substances sur
les surfaces du téléviseur. Cela pourrait altérer le

ni de la surface ou décaper la peinture.

• La surface du panneau d’afchage est spécialement

traitée et peut donc s’abîmer facilement. Évitez de

cogner ou de rayer pas la surface avec les ongles

ou des objets rigides.

• Évitez tout contact prolongé du coffret et du piédestal
avec une substance en caoutchouc ou en PVC. Cela

pourrait altérer le ni de la surface.

Prise d’alimentation

Essuyez régulièrement la fiche du cordon

d’alimentation avec un chiffon sec.

L'humidité et la poussière peuvent causer un incendie

ou une électrocution.

Fixation / Retrait du Piédestal

Préparations

Retirez le piédestal et le téléviseur de la caisse
d’emballage et déposez le support sur une table de
travail ou sur toute autre surface plane.

• Utilisez une table stable et plate, ou toute autre
surface plane similaire capable de supporter le
poids du téléviseur.

• Ne tenez pas la partie du panneau de l’écran.

• Veuillez ne pas rayer ou briser le téléviseur.

Fixation du piédestal

1. Placez le support sur une table ou sur toute autre

surface plane similaire.

2. Tenez le téléviseur au-dessus du support de

manière à ce qu’il coïncide avec le point d’ancrage
du support, puis abaissez-le an qu’il se xe grâce
à son propre poids. Si le support ne se xe pas
correctement, appuyez doucement vers le bas

jusqu’à ce que les loquets se mettent en place
avec un déclic.

Retrait du piédestal du téléviseur

Assurez-vous de retirer le piédestal de la manière

suivante lorsque vous utilisez l’applique de suspension
au mur ou lorsque vous remballez le téléviseur.

• Mettez le téléviseur sur la table de travail avec le
panneau de l’écran sur le tissu propre et doux.
Laissez le support en saillie sur le bord de la surface.

• Appuyez sur les boutons pour relâcher les loquets.

• Retirez le support en le poussant loin du téléviseur.

Français - 26 -

Lors de l'utilisation de l’applique de suspension

au mur

Veuillez contacter votre revendeur local pour l'achat
de l’applique de suspension au mur recommandé.

Orices pour l'installation de l’applique de suspension

au mur ;

Arrière du téléviseur

a

b

a (mm)

75

b (mm) 75

Vue latérale

a

Profondeur de
la vis (a)

Diamètre M4

Remarque : Les vis de montage du téléviseur sur l’applique
de suspension au mur ne sont pas fournis avec le téléviseur.

Informations sur l'environnement

Ce téléviseur a été conçu conformément aux normes
environnementales. Pour réduire effectivement votre
consommation électrique, veuillez suivre les étapes

ci-après :

Le téléviseur ajuste sa Consommation d'énergie en
fonction du niveau choisi, entre Minimum, Moyen,

Maximum ou Auto. Si vous souhaitez régler le
Rétro-Éclairage à une valeur xe, allez au menu
Paramètres Personnalisés et réglez manuellement
le Rétro-Éclairage (situé en dessous de l'option
Économie d'énergie) à l'aide des touches Gauche

et Droite de la télécommande. Réglez sur Désactiver
pour désactiver cette option.

min. (mm) 5

max. (mm) 7

Remarque : Les options d'économie d'énergie disponibles
peuvent varier en fonction du Mode sélectionné dans le menu

Système>Image.

Vous pouvez accéder aux paramètres d'économie
d'énergie dans le menu Système>Image. Sachez

que les réglages de certaines images ne pourront

pas être accessibles pour modication.
Si vous appuyez sur le bouton droit alors que l'option

Auto est sélectionnée, ou sur le bouton gauche alors
que l'option Paramètres Personnels est sélection­née, le message « L'écran s'éteindra dans 15 se-

condes. » s'afche à l'écran. Sélectionnez Continuer
et appuyez sur OK pour éteindre immédiatement
l'écran. Si vous n'appuyez sur aucun bouton, l'écran
va s'éteindre après 15 secondes. Appuyez sur n'im-

porte quelle touche de la télécommande ou sur le
téléviseur pour allumer l'écran à nouveau.

Remarque : L'option d'extinction d'écran n'est pas
disponible lorsque le mode Jeu est activé.

Lorsque le téléviseur n'est pas utilisé, veuillez
l'éteindre ou le débrancher du secteur. Cela permettra
également de réduire la consommation d'énergie.

Fonctions

• TV couleur avec télécommande

• TV numérique / par câble / satellite entièrement

intégrée (DVB-T-T2/C/S-S2)

• Entrées HDMI pour connecter d'autres appareils

aux prises HDMI

• Entrée USB

• Système de menu OSD

• Prise péritel pour appareils externes (appareil vidéo,

jeu vidéo, appareil audio, etc.).

• Système de son stéréo

• Télétexte

• Connexion de casque

• Système de programmation automatique

• Réglage manuel

• L’arrêt est automatique après plus de huit heures

de temps

• Minuteur de mise en veille

• Verrouillage parental

• Coupure automatique du son en l'absence de

transmission.

• Lecture NTSC

• AVL (Limitation automatique du volume)

• PLL (Recherche de fréquences)

• Entrée PC

• Mode Jeu (en option)

• Fonction de coupure de l’image

Français - 27 -

Accessoires Inclus

• Télécommande

• Piles : 2 x AA

• Manuel d'instructions

• Support Amovible

• Vis de Montage du Support (M4 x 12)

Mise en Veille

Lorsque le téléviseur ne reçoit aucun signal
d'entrée (par exemple une antenne ou une source

HDMI) pendant 5 minutes, il passe en veille. Lors
de la prochaine mise en marche, le message

suivant s'afche à l'écran : « Le téléviseur passe

automatiquement en mode veille parce qu'aucun

signal n'a été reçu après un long moment. »

Appuyez sur OK pour continuer.
Si le téléviseur est allumé et qu'il n'est pas utilisé

pendant un certain temps, il passe en veille. Lors
de la prochaine mise en marche, le message

suivant s'afche à l'écran. « Le téléviseur passe

automatiquement en mode veille parce qu'aucun

signal n'a été reçu après un long moment. »
Appuyez sur OK pour continuer.

Commutateur de commande et fonctionnement
de la TV

1. Direction précédente

2. Direction suivante

3. Sélection de Volume/Info/Liste des sources et

commutateur de mise en veille

Le bouton de commande vous permet de contrôler le
volume, le programme, la source et la mise en veille
de votre TV.

Pour régler le volume : Augmentez le volume en

appuyant sur le bouton Haut. Diminuez le volume en
appuyant sur le bouton Bas.

Pour changer de chaîne : Appuyez sur le bouton

du milieu et la bande d'information apparaît à l'écran.

Déroulez les chaînes enregistrées en appuyant sur

les boutons Haut ou Bas.

Pour régler la source : Appuyez deux fois sur la
partie centrale du bouton (pour la deuxième fois)

pour faire apparaître la liste à l'écran. Parcourrez

les sources disponibles en appuyant sur le bouton

Haut ou Bas.

Pour éteindre la Télé Appuyez sur le centre du

bouton vers le bas et maintenez-le enfoncé pendant
quelques secondes, le téléviseur passe alors en
mode veille.

Remarques :

• Si vous éteignez le téléviseur, vous devrez reprendre
la même procédure pour régler le volume.

• Impossible d’afcher le menu principal à l’écran à

l’aide du bouton de commande.

Fonctionnement de la TV à l'aide de la

télécommande

Appuyez sur le bouton Menu de votre télécommande
pour afcher l'écran du menu principal. Utilisez les

boutons de direction pour sélectionner un onglet
de menu et appuyez sur OK pour entrer. Utilisez à
nouveau ces boutons de directions pour sélectionner

ou dénir un élément. Appuyez sur le bouton Retour/
Précédent ou Menu pour sortir du menu.

Sélection d'entrée

Une fois que vous connectez votre télé à des

systèmes externes, vous pouvez passer à d'autres
sources Appuyez sur le bouton Source de la

télécommande successivement pour sélectionner les
différentes sources.

Changer les Chaînes et Régler le Volume

Vous pouvez changer de chaîne et régler le volume à
l'aide des boutons Volume +/- et Programme +/- de
la télécommande.

Insertion des piles dans la télécommande

Soulevez doucement le couvercle situé à l'arrière de la

télécommande. Insérez deux piles AA. Assurez-vous
que les signes (+) et (-) correspondent (respectez la
polarité). Replacez le couvercle.

Français - 28 -

Branchement à l'alimentation

IMPORTANT : Le téléviseur a été conçu uniquement
pour fonctionner avec une prise de 220-240 V

AC, 50 Hz. Après déballage, laissez le téléviseur
atteindre la température ambiante de la pièce avant

de le brancher sur la prise secteur. Branchez le câble
d’alimentation à la prise secteur.

Branchement de l’antenne

Branchez l'antenne ou le câble de la TV à la prise
d'ENTRÉE DE L'ANTENNE (ANT) ou le câble satellite
à la prise d'ENTRÉE DE SATELLITE (LNB) située à

l'arrière de la TV.

satellite

ARRIÈRE
DU
téléviseur

antenne
ou
cable

Notication

RECONNAISSANCE DE MARQUE COMMERCIALE

HDMI, l'interface multimédia de haute dénition ainsi

que le logo de HDMI sont des marques déposées de
HDMI Licensing LLC aux États Unis d’Amérique et

dans d’autres pays.

Fabriqué sous licence de Dolby Laboratoires Dolby,
Dolby Audio, et le symbole du double D sont des
marques déposées de Dolby Laboratories.

Mise au Rebut des Équipements et des

Piles Usagés

Valable uniquement pour l'Union

Européenne et pour les pays
disposant de systèmes de
recyclage

Ces symboles sur le produit, sur

l'emballage et/ou sur les documents joints

signient que les produits électriques et

électroniques et les piles usagés ne
doivent pas être mis au rebut avec les

ordures ménagères.

Pour le traitement, la récupération et

le recyclage des piles et des appareils

usagés, veuillez les déposer dans les
points de collecte prévus, conformément
à la législation nationale.

En mettant au rebut ces produits
convenablement, vous contribuez à la
préservation de précieuses ressources
et à la réduction de leur éventuel impact
sur la santé et l'environnement.

Pour plus de détails sur la collecte et

le recyclage des produits mis au rebut,

contactez votre municipalité.
Conformément à la législation en vigueur

dans votre pays, des pénalités peuvent

être imposées pour mauvaise mise au
rebut de ce déchet.

Remarque sur le symbole des

piles (symbole du bas) :

Ce symbole peut être utilisé en
association avec des symboles

chimiques. Auquel cas, il se conforme
aux exigences de la Directive
concernant les produits chimiques
utilisés.

Déclaration de conformité (DoC)

« Par la présente, Panasonic Corporation déclare que
le téléviseur est en conformité avec les exigences
essentielles et d’autres dispositions pertinentes de
la directive 1999/5/CE. »

Si vous souhaitez obtenir un exemplaire de la DoC
originale de ce téléviseur, visitez le site Web suivant :

http://www.ptc.panasonic.eu/doc

Français - 29 -