Panasonic TQB4TC0095, TH-P42VT30Q, TH-P50VT30M, TH-P50VT30T, TH-P50VT30V User Manual

...

Operating Instructions

Plasma Television

Model No.

TH-P42VT30M TH-P50VT30D TH-P42VT30P TH-P50VT30K TH-P42VT30Q TH-P50VT30M TH-P42VT30V TH-P50VT30P

TH-P50VT30Q TH-P50VT30T TH-P50VT30V

Thank you for purchasing this Panasonic product. Please read these instructions before operating your set and retain them for future reference. The images shown in this manual are for illustrative purposes only.

English

TQB4TC0095

Enjoy viewing 3D images and experience an amazing level of multimedia excitement

Sharp pictures with HDMI terminal Create home theatre and DVD recorder link-ups with “VIERA Link” without complicated settings!

Enjoy rich multimedia

VCR

Amplifier with

Speaker system

DVD Recorder

SD Card

DVD Player

Blu-ray Disc Player

Camcorder

Personal computer

Set top box

Licence

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

, DivX Certified®, DivX Plus HD™ and

DivX associated logos are trademarks of DivX, Inc. and are used under license.

, the DLNA Logo and DLNA CERTIFIED™ are

DLNA trademarks, service marks, or certification marks of the Digital Living Network Alliance.

HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

SDXC Logo is a trademark of SD-3C, LLC.

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks, & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Inc., used under license therefrom.

“AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation.

VIERA Connect is a trademark of Panasonic Corporation.

“RealD 3D” is a trademark of RealD. This product is covered by U.S. Patent No. 5,193,000 until 28 August, 2011.

VGA is a trademark of International Business Machines Corporation.

S-VGA is a registered trademark of the Video Electronics Standard Association.

HDAVI Control™ is a trademark of Panasonic Corporation.

Macintosh is a trademark of Apple Inc.

Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.

This product is licensed under the AVC patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC. See http:// www.mpegla.com.

Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected.

Contents

Be Sure to Read

Safety Precautions ·····································4 (Warning / Caution)

Notes ··························································5

Quick Start Guide

Accessories / Options ·································6 Basic Connection······································10 Identifying Controls ···································11 Auto Tuning ··············································13

Basic Features

Using “VIERA Connect” ····························17 Watching TV ·············································18 Viewing Teletext ········································21 Watching External Inputs ··························23 Viewing 3D images ···································25 How to Use VIERA TOOLS ······················33 How to Use the Menu Functions ··············34

Advanced Features

Tuning and Editing Channels ···················43 Child Lock ·················································45 Input Labels ··············································46 Shipping Condition (Reset settings) ·········47 Using Media Player ··································48 Using Network Services ···························58 VIERA Link Functions ·······························68 External Equipment ··································73

Technical

Technical Information································76 FAQs·························································84 Maintenance ·············································86 Specifications ···········································87

Safety Precautions

Warning

Handling the mains plug and lead

Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat

•

and cause fire.) Ensure that the mains plug is easily accessible.

•

Ensure the earth pin on the mains plug is securely connected to prevent electrical shock.

•

• An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing connection.

Do not touch the mains plug with a wet hand. (This may cause electrical shock.)

•

Safety Precautions

Do not damage the mains lead. (A damaged lead may cause fire or electrical shock.)

•

• Do not move the TV with the lead plugged in the socket outlet.

• Do not place a heavy object on the lead or place the lead near a high-temperature object.

• Do not twist the lead, bend it excessively, or stretch it.

• Do not pull on the lead. Hold onto the mains plug body when disconnecting the lead.

• Do not use a damaged mains plug or socket outlet.

If you find any abnormality, remove the mains plug immediately!

Mains plug types vary between countries.

•

Power source

This TV is designed to operate on:

•

• AC 220 - 240 V, 50 / 60 Hz

TH-P42VT30P, TH-P50VT30P:

(

AC 110 V - 240 V, 50 / 60 Hz

Do not remove covers and NEVER modify the TV yourself

Do not remove the rear cover as live parts are

•

accessible when it is removed. There are no user serviceable parts inside. (High-voltage components may cause serious electrical shock.) Have the TV checked, adjusted, or repaired at

•

your local Panasonic dealer.

Do not expose to rain or excessive moisture

To prevent damage which might result in

•

electric shock or fire, do not expose this TV to rain or excessive moisture. This TV must not be exposed to dripping or splashing water and objects filled with liquid, such as vases, must not be placed on top of or above the TV.

Do not expose to direct sunlight and other sources of heat

Avoid exposing the TV to direct sunlight and

•

other sources of heat.

)

To prevent the spread of fire, keep candles or other open flames away from this product at all times

Do not insert foreign objects into the TV

Do not allow any objects to drop into the TV

•

through the air vents. (Fire or electrical shock may result.)

Do not place the TV on sloped or unstable surfaces

The TV may fall off or tip over.

•

Use only the dedicated pedestals / mounting equipment

Using an unapproved pedestal or other fixtures

•

may make the TV unstable, risking injury. Be sure to ask your local Panasonic dealer to perform setup. Use approved pedestals (p. 6) / wall-hanging

•

brackets (p. 9).

Do not allow children to handle SD Card

As with any small object, SD Cards can be

•

swallowed by young children. Please remove SD Card immediately after use and store out of reach of children.

Caution

This appliance is intended for use in tropical climates

When cleaning the TV, remove the mains plug

Cleaning an energised TV may cause electrical shock.

•

When the TV is not going to be used for a long period of time, remove the mains plug

This TV will still consume some power even in the Off mode, as long as the mains plug is still

•

connected to a live socket outlet.

Transport only in upright position

Transporting the TV with its display panel facing upward or downward may cause damage to the

•

internal circuitry.

Allow sufficient space around the TV for radiated heat

Minimum distance

Do not block the rear air vents

Blocked ventilation by newspapers, table cloths, curtains, etc. may cause overheating, fire or electrical

•

shock.

Do not apply strong force or impact to the display panel

This may cause damage resulting in injury.

•

Do not expose your ears to excessive volume from the headphones

Irreversible damage can be caused.

•

The TV is heavy. Handle the TV by 2 or more people. Support as shown to avoid injury by the TV tipping or falling.

When using the pedestal, keep the space between the bottom of the TV

•

and the surface where the TV is set.

If using a Wall-hanging bracket, refer to its manual.

•

(cm)

Safety Precautions | Notes

Notes

Do not display a still picture for a long time

This causes the image to remain on the plasma screen (“image retention”). This is not considered a malfunction and is not covered by the warranty.

Typical still images

Programme number and other logos

•

Image displayed in 4:3 mode

•

Video game

•

Computer image

•

To prevent image retention, contrast is lowered automatically after a few minutes if no signals are sent or no operations are performed. (p. 84)

Auto power standby function

The TV will automatically go into Standby mode in the

•

following conditions:

• no signal is received and no operation is performed for 30 minutes in TV mode

• [Off Timer] is active in the Timer Menu (p. 18)

• no operation is performed for the period selected in [Auto Standby] (p. 40)

Keep the TV away from these types of equipment

Electronic equipment

•

In particular, do not place video equipment near the TV. Electromagnetic interference may distort images / sound. Equipment with an infrared sensor

•

This TV also emits infrared rays. This may affect operation of other equipment.

Accessories / Options

Standard accessories

Remote Control

N2QAYB000586

•

Batteries for the Remote Control (2)

R6 (AA)

•

Pedestal

(p. 7)

Wireless LAN Adaptor

(p. 15)

TH-P42VT30V, TH-P50VT30D TH-P50VT30K, TH-P50VT30T

(

TH-P50VT30V

N5HBZ0000056• K2KYYYY00132

•

)

Ferrite core (2)

(Large size)

J0KG00000146

•

(p. 75)

TH-P42VT30Q

Accessories / Options

(

TH-P50VT30Q

Terminal adaptors

RF adaptor

K1TYYYY00159

•

(p. 10, 74)

Audio adaptor (2)

K2KYYYY00138

•

(p. 74, 75)

This product contains possibly dangerous parts (such as plastic bags), which can be breathed in

•

or swallowed by young children accidentally. Keep these parts out of reach of young children.

Inserting and removing remote’s batteries

Ferrite core

(Middle size)

J0KG00000100

•

(p. 10, 74)

TH-P42VT30Q

)

(

TH-P50VT30Q

Hook

Ferrite core

(Small size)

J0KG00000011

•

(p. 75)

)

COMPONENT adaptor

K2KYYYY00137

•

(p. 74)

Optical digital audio adaptor

K7CXGYC00002

•

(p. 74)

Pull Open

Clamper

(p. 10)

Composite adaptor (2)

K2KYYYY00136

•

(p. 74, 75)

PC adaptor

K1HY20YY0007

•

(p. 75)

Caution

Incorrect installation may cause battery leakage

•

and corrosion, resulting in damage to the remote control. Do not mix old and new batteries.

•

Do not mix different battery types (such as alkaline

•

and manganese batteries). Do not use rechargeable (Ni-Cd) batteries.

•

Do not burn or breakup batteries.

•

Batteries must not be exposed to excessive heat such as sunshine, fire or the like. Do not disassemble or modify the remote control.

•

3D Eyewear set (2)

(p. 26)

Operating Instructions

Note the correct polarity (+ or -)

Attaching and removing the pedestal

Warning

Do not disassemble or modify the pedestal.

Otherwise the TV may fall over and become damaged, and personal injury may result.

•

Caution

Do not use any pedestal other than that provided with this TV.

Otherwise the TV or the display may fall over and become damaged, and personal injury may result.

•

Do not use the pedestal if it becomes warped or physically damaged.

If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest

•

Panasonic dealer immediately.

During set-up, make sure that all screws are securely tightened.

If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will

•

not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.

Ensure that the TV does not fall over.

If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and

•

personal injury may result.

Two or more people are required to install and remove the TV.

If two or more people are not present, the TV may be dropped, and personal injury may result.

•

Assembly screw (4) (silver)

M5 × 20 (mm)

•

Assembly screw (4) (black)

M5 × 25 (mm)

•

Assembly screw (black)

M4 × 8 (mm)

•

Accessories / Options

Pole

TBL5ZA3051

•

Assembling the pedestal

Use the assembly screws to the base securely.

Make sure that the screws are securely tightened.

•

Forcing the assembly screws the wrong way will

•

strip the threads.

Pole

Base

Front

Base

TBL5ZX0071

•

TH-P42VT30M TH-P42VT30P TH-P42VT30Q

(

TH-P42VT30V

to fasten the pole

)

Cover

TBL5ZB3039

•

TBL5ZX0047

•

TH-P50VT30D TH-P50VT30K TH-P50VT30M

)

TH-P50VT30P TH-P50VT30Q

(

TH-P50VT30T TH-P50VT30V

Attach the cover with assembly screw

•

Securing the TV

Insert the pole into the TV, and then fasten securely with the assembly screws .

Tighten the four assembly screws loosely at first,

•

then tighten them firmly to fix securely. Carry out the work on a horizontal and level surface.

•

Removing the pedestal from the TV

Accessories / Options

Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.

1 Remove the assembly screws from the TV. 2 Pull out the pedestal from the TV. 3 Remove the assembly screw from the cover. 4 Pull out the cover. 5 Remove the assembly screws from the pole.

Adjust the panel to your desired angle

Arrow mark

Hole for pedestal installation

(View from the bottom)

15°

∗

TH-P42VT30M TH-P42VT30P



(View from above)

Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full

•

rotation range. Do not place any objects or hands within the full rotation range.

•

Optional accessories

Please contact your nearest Panasonic dealer to purchase the recommended optional accessories. For additional details, please refer to the manual of the optional accessories.

Wireless LAN Adaptor and Extension cable

Please refer to the following web site for usable Wireless LAN Adaptor. (English only) http://panasonic.jp/support/global/cs/tv/

Additional information for Wireless LAN Adaptor and access point may also be on

•

this web site.

Caution

To use the Wireless LAN Adaptor, an Access Point needs to be obtained.

•

It is recommended to use the Wireless LAN Adaptor with the extension cable.

•

To avoid radio wave interference, keep the TV away from the devices such as

•

other wireless LAN devices, microwaves and the devices that use 2.4 GHz and 5 GHz signals when using the Wireless LAN Adaptor. Otherwise malfunction may occur. Depending on the area, this optional accessory may not be available.

•



TH-P42VT30Q

(

TH-P42VT30V

)

10°

∗

TH-P50VT30D TH-P50VT30K TH-P50VT30M TH-P50VT30P TH-P50VT30Q

(

TH-P50VT30T TH-P50VT30V

)

3D Eyewear

(Battery type)

TY-EW3D10W

•

(Rechargeable type)

TY-EW3D2SW

•

TY-EW3D2MW

•

TY-EW3D2LW

•

Product information (Model No. and release date etc.) is subject to change

•

without notice. For more product information (English only)

•

http://panasonic.net/avc/viera/3d/asia.html

Communication Camera

TY-CC10W

•

Wall-hanging bracket

TY-WK4P1RW

•

The angle of wall-hanging bracket can be adjusted in “zero tilting (vertical)” and “5, 10, 15 or 20-degree tilting” for this TV.

Caution

This camera can be used on VIERA Connect (p. 17).

•

Please also read the manual of the camera.

•

Depending on the area, this optional accessory may not be available.

•

For details, consult your local Panasonic dealer.

Rear of the TV

400 mm

300 mm

Holes for wall-hanging bracket installation

Warning

Using other wall-hanging brackets, or installing a wall-hanging bracket by yourself

•

have the risk of personal injury and product damage. In order to maintain the unit’s performance and safety, be absolutely sure to ask your dealer or a licensed contractor to secure the wall-hanging brackets. Any damage caused by installing without a qualified installer will void your warranty. Carefully read the instructions accompanying optional accessories, and be

•

absolutely sure to take steps to prevent the TV from falling off. Handle the TV carefully during installation since subjecting it to impact or other

•

forces may cause product damage. Take care when fixing wall brackets to the wall. Always ensure that there are no

•

electrical cables or pipes in the wall before hanging bracket. To prevent fall and injury, remove the TV from its fixed wall position when it is no

•

longer in use.

Screw for fixing the TV onto the wall-hanging bracket (not supplied with the TV)

Depth of screw: minimum 10 mm maximum 16 mm

Screw Thread Type: M8

(View from the side)

Accessories / Options

Basic Connection

External equipment and cables shown are not supplied with this TV. Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.

Rear of the TV

Basic Connection

Mains lead

AC 220 - 240 V, 50 / 60 Hz

TH-P42VT30P, TH-P50VT30P:

(

AC 110 V - 240 V, 50 / 60 Hz

)

■ Clamper

Attach the clamper Bundle the cables

hole

Insert the clamper in a hole

hooks

Set the tip in the hooks

Satellite dish

Set top box

Fully wired HDMI compliant cable

Less than 10 cm

Ferrite core - Middle size (supplied: TH-P42VT30Q, TH-P50VT30Q)

RF adaptor (supplied)

RF cable

Installing the Ferrite core

Open

Pull back the tabs (in two places)

Caution

Please use the supplied RF adaptor with the supplied

•

middle size ferrite core to comply with the EMC standard.

To remove from the TV:

snaps

Keep pushing both side snaps

Press the cable through and close

To loosen:

knob

Aerial

Keep pushing the knob

Note

Keep RF (antenna) cable away from the mains lead to avoid and minimise mains interference pickup.

•

Do not place the RF cable under the TV.

•

To obtain optimum quality picture and sound, an aerial, the correct cable (75 Ω coaxial), and the

•

correct terminating plug are required. If a communal aerial system is used, you may require the correct connection cable and plug between

•

the wall aerial socket and the TV. Your local Television Service Centre or dealer may be able to assist you in obtaining the correct aerial

•

system for your particular area and the accessories required. Any matters regarding aerial installation, upgrading of existing systems or accessories required, and

•

the costs incurred, are the responsibility of you, the Customer. To obtain optimum quality picture, select either an Aerial or a cable TV network.

•

VIERA Link connection (p. 68)

•

Other equipment connection (p. 73 - 75)

•

Read the manual of the equipment, too.

•

Identifying Controls

6789

1 SD Card slot 2 USB2 / 3 port 3 DIGITAL AUDIO OUT terminal 4 HDMI1 - 4 terminal 5 Headphones jack 6 Mains power On / Off switch

Use to switch the mains power.

•

If you turned the TV Off during Standby mode by the remote control last time, the TV will be in Standby mode when you turn the TV On with Mains power On / Off switch.

7 Remote control signal receiver

Do not place any objects between the TV

•

remote control signal receiver and remote control.

8 C.A.T.S. (Contrast Automatic Tracking

System) sensor

Senses brightness to adjust picture quality

•

when [Eco Mode] in the Picture Menu is set to [On] (p. 35)

9 Power LED

Red: Standby

•

Green: On Orange (flash): [USB Charge in Standby] is

[On]

When using the remote control, indicates the

•

TV has received a command.

10 Infrared transmitter for 3D Eyewear

Do not place any objects between the transmitter

•

and 3D Eyewear.

11 Function select

[Volume] / [Contrast] / [Brightness] / [Colour]

•

/ [Sharpness] / [Tint] (NTSC signal) / [Bass] ([Music] or [Speech] mode in the Sound Menu) / [Treble] ([Music] or [Speech] mode in the Sound Menu) / [Balance] / [Auto Tuning]

12 Channel Up / Down, Value change (when using

the F button), Switching the TV On (press either button for about 1 second when in Standby mode)

13 Changes the input mode

Identifying Controls

About the Operation Guide - On Screen Displays

The Operation Guide is displayed at the bottom of the on Screen Displays. The button used on this screen and manner of operation is displayed.

Operation Guide

Example: Media Player

Media Player

Slideshow View Select Drive Select Contents Select

View

Select

Photo

EXIT

RETURN

OPTION

Info

Option Menu

All photos

SD Card

INFO

OPTION

RGYB

EXIT

RETURN

Remote Control

POWER

2 3

4 5

Identifying Controls

1 Standby On / Off switch

Switches TV On or Off standby

•

2 3D button (p. 30)

Switches to the viewing mode between 2D

•

and 3D

3 [Main Menu] (p. 34)

Press to access Picture, Sound and Setup

•

Menus

4 Information (p. 19)

Displays channel and programme

•

information

5 VIERA TOOLS

Displays some special feature icons and

•

accesses easily

6 [VIERA Link Menu]

Accesses VIERA Link Menu

•

MENU ASPECT

INFO

OPTION

RGY B

TEXT

F.P.

ghi

MUTE

POWER

INPUT

TVPC AV

INDEX HOLD

abc def

jk l

tuvpqrs

LAST VIEW

(p. 33)

CHVOL

REC

EXIT

RETURN

mno

wxyz

(p. 70)

15 16

22 23

7OK

Confirms selections and choices

•

Press after selecting channel positions to

•

quickly change programme

8 [Option Menu]

Easy optional setting for viewing, sound, etc.

•

9 Teletext (p. 21)

Switches to teletext mode

•

10 Favourite Page∗ (p. 21)

Calls up the teletext page stored in blue

•

button.

11 Numeric buttons

Changes channel and teletext pages

•

When in Standby mode, switches TV On

•

12 Sound Mute

Switches sound mute On or Off

•

13 Volume Up / Down 14 Input mode selection

PC - switches to PC input mode (p. 23)

•

TV - switches to TV mode (p. 18)

•

AV - switches to AV input mode from Input

•

Selection list (p. 23)

15 Aspect (p. 20)

Changes aspect ratio

•

16 [VIERA Connect] (p. 17)

Displays VIERA Connect home screen

•

17 Exit

Returns to the normal viewing screen

•

18 [Media Player] (p. 48)

Switches to SD Card and USB device

•

viewing / listening mode

19 Cursor buttons

Makes selections and adjustments

•

20 Return

Returns to the previous menu / page

•

21 Coloured buttons

Used for the selection, navigation and

•

operation of various functions

22 Hold

Freeze / unfreeze picture (p. 18)

•

Holds the current teletext page (teletext

•

mode) (p. 21)

23 Index (p. 21)

Returns to the teletext index page (teletext

•

mode)

24 Last View (p. 19)

Switches to previously viewed channel or

•

input modes

25 Channel Up / Down

Selects channel in sequence

•

26 Connected equipment operations

(p. 24, 55)

∗

Some countries do not provide a teletext service

(p. 19)

Auto Tuning

Search and store TV channels automatically.

These steps are not necessary if the setup has been completed by your local dealer.

•

Plug the TV into mains socket and switch On

POWER

INFO

OPTION

R Y

MUTE

POWER

SD CARD

G B

STTLTEXT

ghi

INPUT

TV AV

ASPECTMENU

EXIT

RETURN

INDEX HOLD

abc def

jk l

mno

tuvpqrs

wxyz

LAST VIEW

CHVOL

REC

Select your language

OSD Language

English

Select your country

Country

United Arab Emirates

Select your area

Channel Plan

Auto Tuning starts

Auto Tuning

Scan

You can now use the remote control to turn On the TV or

•

switch the TV to Standby mode. (Power LED: On)

select

Tiếng Việt

Indonesia

Thailand Vietnam

Asia/W.Europe

CIS/E.Europe

China

Hong Kong

NZ/Indonesia

CATV/Other

Français

MalaysiaIndia

IndonesiaSingapore

Saudi Arabia

OthersKuwait

When selecting CATV / Other, press the OK button, and then select the Channel Plan from Indian CATV, South Africa,

set

select access

select

access

American System, American CATV or Japan.

Auto Tuning will start to search

•

EXIT

RETURN

CH4

for TV channels and store them.

120

The sorted channel order depends upon the TV signal, the broadcasting system and reception conditions.

Auto Tuning

Setup the network connection

Select the network type

Network Setup

Select Wired or Wireless

Wired Wireless

Set later

[Wired]: wired connection

(p. 15)

[Wireless]: wireless connection

(p. 16)

select access

To setup later on or skip this step

•

Select [Set later] or

EXIT

Select [Home]

Please select your viewing environment.

Home Shop

∗

select confirm

Auto Tuning is completed

Viewing environment mode

∗

Home

: Recommended mode for viewing at home. Select [Home] for optimal picture / power

consumption. [Viewing Mode] is set as [Normal] (p. 35).

Shop : Demonstration mode to explain main features of this TV (for in-store display). [Viewing Mode] is

set as [Dynamic] (p. 35).

To return to viewing environment selection mode if you selected [Shop]

Shop

Auto Tuning

You have selected shop mode

To change viewing environment mode later on, reset all settings by accessing Shipping Condition.

•

[Shipping Condition] (p. 47)

If you connect the Wireless LAN Adaptor later on, the confirmation screen will be displayed for the setup

Wireless LAN adaptor connection

Wireless LAN adaptor connected, do you want to set it up? No - Exit

Current network type : Wireless

Yes

RETURN

Automatic Demo

Off On

To setup the Wireless LAN connection (p. 63)

•

Please select your viewing environment.

Home Shop

RETURN

Setup the network connection

Set up the network connection to enable the network service functions such as VIERA Connect, etc. (p. 17, 67)

To set up the wireless connection, the Wireless LAN Adaptor is required.

•

Please note that this TV does not support wireless public access points.

•

Ensure the network connections and network environment are completed before starting setup.

•

Connect the LAN cable or Wireless LAN Adaptor

To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a broadband network environment.

Rear of the TV

Wireless connection

Wireless LAN Adaptor (supplied: TH-P42VT30V, TH-P50VT30D, TH-P50VT30K, TH-P50VT30T, TH-P50VT30V)

Connect to the

•

USB 1, 2 or 3 port.

Wired connection

LAN cable

If you do not have any broadband network services, please consult your retailer for assistance.

•

For more information of the network connections (p. 59)

•

Caution

To use the Wireless LAN Adaptor, an Access Point needs to be obtained.

•

It is recommended to use the Wireless LAN Adaptor with the extension cable.

•

To avoid radio wave interference, keep the TV away from the devices such as other wireless

•

LAN devices, microwaves and the devices that use 2.4 GHz and 5 GHz signals when using the Wireless LAN Adaptor. Otherwise malfunction may occur.

Select [Wired] or [Wireless]

Network Setup

Select Wired or Wireless

Wired Wireless

Start the settings

■ [Wired]

Select [Auto]

Acquire IP Address

Auto Manual

select access

To set manually, select [Manual] and set

•

each item. For details

Set later

(p. 61 - 62)

select access

Connection Test

Check network cable connection. Check acquired IP address. Check for devices using same IP address. Check gateway connection. Check server connection.

Automatically setup is done and the test of the network connection starts.

: succeeded

The test is successful and the TV is connected to the network.

: failed

Check the settings and connections, and then select [Retry]

■ Setup Wireless

LAN Adaptor

Insert straight in

Access point

Internet

environment

Internet

environment

Auto Tuning

■ [Wireless]

Select the connection type

Connection Type

Please select network connection type.

Search for access point

WPS(Push button)

select

confirm

•

■ [Search for access point]

Access points found automatically are listed.

Available Access Points

No.

SSID Wireless type Encrypt

1 Access Point A 11n(2.4GHz)

2 Access Point B 11n(5GHz)

3 Access Point C 11n(5GHz)

1 Select your desired access point

Reception

select

access

•

Auto Tuning

Encryption Key Setting

Connection will be made with the following settings:SSID : Access Point A Authentication type : WPA-PSK Encryption type : TKIP

Please input the encryption key.

Encryption key

Access Point Settings

Encryption key

A B C D E F G H I J K L M N U V W X Y Z 0 1 2 3 4 5 6 a b c d e f g h i j k l m n u v w x y z ( ) + - . * _

Access Point Settings

Encryption key is set to:XXXXXXXX

Select ‘Yes’ to confirm. Select ‘No’ to change.

Yes

O P Q R S T 7 8 9 ! : # o p q r s t

■ [WPS(Push button)]

WPS(Push button)

1) Please press the ‘WPS’ button on the access

point until its light flashes.

point until its light ashes.

2) When the light is ashing select ‘Connect’ on

2) When the light is flashing select ‘Connect’ on TV.

TV.

If you are unsure, please check the instruction

manual of the access point.

Perform the connection test after the access point setting is finished

Complete the network connection

Connect

Connection Test

Check access point connection. Check acquired IP address. Check for devices using same IP address. Check gateway connection. Check server connection.

2 Access the encryption key input mode

If the selected access point is not encrypted, the confirmation

•

screen will be displayed. It is recommended to select the encrypted access point.

3 Enter the encryption key of the access point

(Set characters one by one)

select

set

You can set characters by using numeric buttons.

•

4 Select [Yes]

select set

To re-enter the encryption key, select [No].

•

If the connection has failed, check the encryption key, settings

•

and positions of your access point. And then, follow the on screen instructions.

Press the WPS button on the access point until the light flashes. And then, press the OK button to connect the Wireless LAN Adaptor and the access point.

Ensure that your access point supports WPS for this method.

•

WPS: Wi-Fi Protected Setup™

•

: succeeded

The test is successful and the TV is connected to the network.

: failed

Check the settings and connections, and then select [Retry].

To set manually, select [Manual] and set each item.

•

For details (p. 63)

If your access point supports WPS (Push button), then select this option. If not, select [Search for access point].

To search access points again

For the information of the highlighted access point

To set manually (p. 63)

RETURN

Store

INFO

(Press twice)

Using “VIERA Connect”

VIERA Connect is a gateway to the internet services unique to Panasonic and has expanded VIERA CAST features greatly. VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents such as photos, videos, games, etc. from VIERA Connect home screen.

This TV has no full browser function and all features of websites may not be available.

•

Turn power on

POWER

INFO

SD CARD

INPUT

TV AV

ASPECTMENU

EXIT

Press for about 1 second

•

Mains power On / Off switch should be

•

On. (p. 11)

Every time you turn on the TV, VIERA Connect

OPTION

R G Y B

STTLTEXT

INDEX HOLD

abc def

jk l

ghi

tuvpqrs

■

To exit from VIERA Connect

EXIT

To set the

•

VIERA Connect instruction

RETURN

mno

wxyz

Enjoy selected internet content with VIERA Connect.

Simply press the OK / INTERNET button

Access VIERA Connect

While the banner is displayed

Example:

Welcome to VIERA Connect™

VIERA Connect™ home screen is subject to change without notice.

The services through VIERA Connect™ are operated by their respective service providers, and service

may be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make

no warranty for the content or the continuity of the services.

All features of websites or content of the service may not be available.

Don’t show this message again

Some content may only be available for specific countries and may be presented in specific languages.

ENTER

Some content may be inappropriate for some viewers.

Example: VIERA Connect home screen

introduction banner appears. The banner is subject to change.

The button design

INTERNET

Depending on the usage conditions, it may

•

take a while to read all the data. Messages might be displayed before

•

VIERA Connect home screen.

•

varies depending on the remote control.

Please read these instructions carefully and follow the on screen instructions.

To go to the next level

•

[MORE]

To back to the previous level

•

[BACK]

banner display off

[VIERA Connect

Banner] (p. 41)

BACK

■ How to operate VIERA Connect (current as of January, 2011)

To move the cursor / select the item

•

When the key words are displayed on

•

colour bar

R G Y

Video communication requires an exclusive Communication Camera TY-CC10W.

•

“Optional accessories” (p. 8)

For details, read the manual of the Communication Camera. You can connect a keyboard and a gamepad via USB port for character input and playing games in VIERA Connect.

•

You can also operate the TV with a keyboard or a gamepad other than VIERA Connect features. For more information “USB connection” (p. 83)

Note

If you cannot access VIERA Connect, check the network connections and settings (p. 15 - 16).

•

For more information of VIERA Connect (p. 67)

•

To access

•

When options with

•

numbers are displayed

abc def

jk l

ghi

mno

tuvpqrs

wxyz

To return to the previous screen

•

RETURN

To return to VIERA Connect

•

home screen

INTERNET

Using “VIERA Connect”

Watching TV

POWER

INFO

OPTION

Watching TV

When the TV is

•

switched to standby, there will be a clicking sound after a short delay. This is normal.

Other useful functions

Freeze / unfreeze picture

HOLD

MENU ASPECT

ghi

Hold

INPUT

EXIT

HOLD

abc def

jk l

tuvpqrs

wxyz

LAST VIEW

mno

Mains power On / Off switch should

Turn power on

•

be On. (p. 11)

■ VIERA Connect banner appears

You can access to VIERA Connect and enjoy the various contents.

To remove this banner, leave for about 5 seconds

•

or press any buttons (except the buttons to access VIERA Connect). To set this banner display off

•

[VIERA Connect Banner] (p. 41)

Select TV mode

Select a channel

down

abc def

jk l

ghi

tuvpqrs

To select the two-digit channel

•

mno

number, e.g. 35

wxyz

def

If one-digit channel number

•

jk l

(in a short time)

(quickly changes the channel)

Off Timer

Turn the TV off automatically after a fixed period of time [Off / 15 / 30 / 45 / 60 / 75 / 90 minutes]

1 Display

the menu

2 Select [Timer] 3 Select [Off Timer] and set the time

[Off Timer]

Off

15 30 45 60 75 90

minutes minutes minutes minutes minutes minutes

select

the time

store

Main Menu

Picture

Sound

Timer

Setup

Off Timer

Auto Standby

select

access

To cancel Set to off or turn the TV off.

•

To display the remaining time “Display Information banner” (p. 19)

•

When the remaining time is within 3 minutes, the remaining time will

•

flash on screen.

Display Information banner

INFO

Also appears when changing a channel

•

CH08

5.5MHz

PAL

16:9

, ,

, Audio mode (p. 79)

Sound mute On

To hide

•

EXIT

1 - 90 Off Timer remaining time

Teletext

(varies depending on the broadcasters) Teletext service available

Display the selectable settings for the current programme

1 Check or change the current

programme status instantly

OPTION

[Channel Colour Set] Sets colour density [Picture Menu] (p. 35)

[Teletext Character Set]

Sets the teletext language

[MPX]

Selects multiplex sound (if available)

[Volume Correction] Adjusts volume of individual channel or input mode [Sound Menu] (p. 39)

[Setup Menu] (p. 41)

2 Select 3 Change

select

access

[Sound Menu] (p. 39)

Input mode Channel position Channel number Sound system Colour system Aspect ratio

For settings (p. 18)

•

select / change

store

Watching TV

Last view

Switch to previously viewed channel or input mode easily

Press again to return to the present view.

•

LAST VIEW

Note

Switching channel is not available while Direct TV Recording is in progress.

•

Watching less than 10 seconds is not regarded as the previously viewed channel or input mode.

•

Change aspect ratio

Enjoy viewing the image at its optimum size and aspect.

Press repeatedly until you reach the desired mode

ASPECT

■ If Aspect Selection list is displayed

1 Display Aspect Selection list 2 While the list is displayed, select the mode

ASPECT

[16:9] [14:9] [Just]

[4:3] [4:3 Full] [Zoom1]

Watching TV

[Zoom2] [Zoom3]

Note

Only [16:9] and [4:3] are available in PC input mode.

•

Aspect is fixed to [16:9] when [Viewing Mode] is set to [Game] in the Picture Menu.

•

Not available in teletext service.

•

Aspect mode can be memorised separately for each SD (Standard definition) and HD (High definition)

•

signals.

Aspect Selection

16:9

14:9 Just 4:3 4:3 Full Zoom1 Zoom2 Zoom3

Change

Select

EXIT

RETURN

Aspect Selection

16:9

14:9 Just 4:3 4:3 Full Zoom1 Zoom2 Zoom3

Directly displays the image at 16:9 without distortion (anamorphic).

Displays the image at the standard 4:3 without distortion.

Displays a 16:9 letterbox (anamorphic) image full-screen without distortion.

select

change

Displays the image at the standard 14:9 without distortion.

Displays a 4:3 image full-screen. Stretching is only noticeable at the left and right edges.

Displays a 4:3 image enlarged horizontally to fit the screen.

HD signal only

•

Displays a 16:9 letterbox or 4:3 image without distortion.

Displays a 2.35:1 letterbox (anamorphic) image full-screen without distortion. At 16:9, displays the image at its maximum (with slight enlargement).

Change OSD language

You can change language for on screen displays.

1 Display

the menu

2 Select [Setup] 3 Select [OSD Language]

Main Menu

Picture

Sound

Timer

Setup

4 Select the language and set

OSD Language

English

Tiếng Việt

Indonesia

Français

select

access

select

set

Eco Navigation Child Lock Tuning Menu

OSD Language

Display Settings VIERA Link Settings Network Setup DivX® VOD Advance(isfccc)

Access

Off

1/2

select

access

Viewing Teletext

Teletext services are the text information provided by the broadcasters. The features may vary depending on the broadcasters.

What is FASTEXT mode?

In FASTEXT mode, four differently coloured subjects are situated at the bottom of the screen. To access more information about one of these subjects, press the appropriately coloured button. This facility enables fast access to information on the subjects shown.

What is List mode?

In List mode, four differently coloured page numbers are situated at the bottom of the screen. Each of these numbers can be altered and stored in the TV’s memory. (“Store frequently viewed pages” p. 22)

■ To change mode [Teletext] in the Setup Menu (p. 41)

Sub page number

<< 01 02 03 04 05 06 07 >>

TELETEXT

INFORMATION

Current page number

R G Y B

(Corresponds to the colour bar)

17:51 28 Feb

Time / date

Colour bar

RGYB

TEXT F.P.

INDEX HOLD

abc def

ghi

jk l

tuvpqrs

EXIT

mno

wxyz

Switch to Teletext

Displays the index page

•

(content varies depending on the broadcasters)

Select the page

abc def

jk l

ghi

mno

tuvpqrs

wxyz

■ To adjust contrast

(press three times) As the blue bar is displayed

■ To return to TV

TEXT

down

EXIT

Viewing Teletext

Functions (Teletext mode)

HOLD Reveal hidden data

Stop automatic updating

HOLD

(If you wish to hold the current page without updating)

■ To resume

HOLD

Reveal hidden words e.g. quiz page answers

■ To hide

INDEX Call up a favourite page

Return to the main index page

INDEX

View a favourite page stored

F.P.

Call up the page stored on the blue button

•

(List mode). Factory setting is “P103”.

•

View in multi window

Watch TV and Teletext in two windows at once

(press twice)

Operations can be made only in Teletext screen.

•

Select Picture and text On or Off

FULL / TOP / BOTTOM

(TOP) (BOTTOM) Normal (FULL)

(Expand the TOP half)

(Expand the BOTTOM half)

Store frequently viewed pages

Store frequently viewed pages in the colour bar (List mode only)

Corresponding colour button (As page is displayed)

Viewing Teletext

■ To change stored pages

Coloured button you want to change

press and hold

abc def

Enter

jk l

ghi

mno

new page

tuvpqrs

wxyz

number

press and hold

View sub page

View sub page (Only when teletext is more than one page)

Appears at top of the screen

■ To view specific sub page

Sub pages:

•

The number of sub pages varies depending on the broadcasters. It may take some time for searching, during which time you can watch TV.

Watch TV while waiting for update

View the TV picture while searching for a teletext page

Teletext automatically updates itself when new information becomes available.

Enter the 4-digit number example : P6

P108

Appears when

mno

View the updated page

updating is completed

The number changes to white.

Changes to TV screen temporarily (You cannot change the programme.)

The news page provides a function that indicates arrival of latest news (“News Flash”).

•

Watching External Inputs

Connect the external equipment (VCRs, DVD equipment, PC, etc.) and you can watch through the input.

To connect the equipment (p. 10, 73 - 75)

•

Display the input selection menu

When viewing PC PC ( skip to 3)

Select the input mode connected to the

equipment

Example (AV2)

Input Selection

AV1

AV2

AV3 PC HDMI1 HDMI2 HDMI3 HDMI4 TV SD Card/USB

You can also select the input using the AV button on the remote

•

control or the side panel of the TV (p. 11). Press the button repeatedly until the desired input is selected. You can label or skip each input mode [Input Labels] (p. 46)

•

Skipped inputs will not be displayed when the AV button is pressed.

View

Example (AV2)

AV2 PAL 16:9

•

select

watch

If the external equipment has an aspect adjustment function, set to [16:9].

ghi

POWER

INPUT

TV AV

abc def

jk l

tuvpqrs

REC

mno

wxyz

Watching External Inputs

■ To return to TV

Displays the selected mode

Example (PC)

PC 640X480 / 60Hz 16:9

Displays the selected mode

You can also listen to PC sound with

•

the audio cable connected. To connect (p. 75) You can setup some functions

•

PC Setup (p. 40) in the Setup Menu.

For HDMI-compatible PC, possible to

•

connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by using HDMI cable (p. 77 - 78).

Operating the equipment with the TV remote control

The Panasonic equipment connected to the TV can be directly operated with the below buttons of this TV remote control.

POWER

Standby

Set to Standby mode / Turn on

Play

Playback videocassette / DVD

Stop

Stop the operation

Rewind / Skip / Search

VCR: Rewind, view the picture rapidly in reverse DVD / video content: Skip to the previous track, title or chapter

Press and hold to search backward

Fast-forward / Skip / Search

VCR: Fast-forward, view the picture rapidly forward DVD / video content: Skip to the next track, title or chapter

Press and hold to search forward

Pause

REC

Pause / Resume DVD: Press and hold to play at slow speed

Programme Up / Down

Select programme

Record

Start recording

How to change the code for the type of the equipment

Each type of Panasonic equipment has its own remote control code. Please change the code for each equipment you want to operate.

Watching External Inputs

If you operate in Video mode of Media Player (p. 55) or the connected equipment in VIERA Link (p. 71), select the code “73”.

Press and hold

Enter the appropriate code (see table below)

Using in Video mode of Media Player

POWER

during the following operations

abc def

jk l

ghi

mno

tuvpqrs

Press

wxyz

Type of the equipment Code

DVD Recorder / DVD Player 70 (default)

Player theatre / Blu-ray Disc theatre 71

VCR 72

(p. 55)

The equipment using in VIERA Link

“VIERA Link Control” (p. 71)

Note

Confirm if the remote control works correctly after changing the code.

•

The codes may be reset to default values if batteries are replaced.

•

Some operations may not be possible on some equipment models.

•

Viewing 3D images

You can enjoy viewing 3D images with contents or programmes corresponding to the 3D effect by wearing the 3D Eyewear (supplied). This TV supports [Frame Sequential]∗1, [Side by Side]∗2 and [Top and Bottom]∗3 3D formats.

∗

1: The 3D format that the images for the left and right eyes are recorded with the high definition quality

and alternately played back

∗

2, ∗3: Other available 3D formats

Danger

About Prohibition of Heating

Do not put 3D Eyewear in fire, heat it or leave it in places that can get hot.

•

3D Eyewear contains a lithium-ion polymer rechargeable battery, so heating may result in combustion or rupture that may cause burns or fire.

Warning

About Prevention of Accidental Ingestion

Do not store any 3D Eyewear parts (ferrite core, etc.) in places where small children can reach.

•

There is a danger small children could swallow such parts by mistake.

• If a child accidentally swallows such parts, seek immediate medical attention.

About Prohibition of Disassembly

Do not disassemble or modify the 3D Eyewear.

•

When disposing this product, refer “Disposal” (p. 32) and disassemble properly for removing the rechargeable battery.

About Charging

Charge by connecting the included charging cable to the USB terminal of a Panasonic TV

•

supporting 3D.

Charging with other devices may result in battery leakage, heating or rupture.

Do not use the included charging cable for uses other than charging 3D Eyewear.

•

Doing so may result in heating, combustion or damage.

Caution

About 3D Eyewear

Do not drop, exert pressure on, or step on the 3D Eyewear.

•

Doing so may damage the glass section, which may result in injury.

• Always store the 3D Eyewear in the case provided when not in use.

Be careful of the tips of the frame when putting on the 3D Eyewear.

•

Accidentally inserting the tip of the frame into the eye may cause injury.

Always keep the 3D Eyewear in a cool, dry place.

•

Failure to do so may cause fire or electric shock.

Be careful not to trap a finger in the hinge section of the 3D Eyewear.

•

Doing so may result in injury.

• Pay special attention when children are using this product.

About Viewing of 3D Images

In the event that you experience dizziness, nausea, or other discomfort while viewing 3D

•

images, discontinue use and rest your eyes.

When you set the effect by using [3D Adjustment], take into account that the vision of 3D images varies among different individuals.

Do not use the 3D Eyewear if you have a history of oversensitivity to light, heart problems, or

•

have any other existing medical condition.

Using the 3D Eyewear may cause the symptoms to worsen.

Stop using the 3D Eyewear immediately if you feel tired, discomfort, or any other abnormality.

•

Continuing to use the 3D Eyewear in such cases may cause you to feel unwell. Please take the necessary rest before continuing use.

When watching 3D movies, take an appropriate length break after watching a movie.

•

When watching 3D content on interactive devices such as 3D games or computers, take an

•

appropriate length break after using for 30 - 60 minutes.

Prolonged use may cause eyesight fatigue.

Viewing 3D images

When using the 3D Eyewear, be careful not to strike the television screen or other people by

•

mistake.

As the images are in 3D, the distance between the user and screen may be mistaken, causing the user to strike the screen which may result in injury.

Use the 3D Eyewear when viewing 3D images.

•

When using the 3D Eyewear, make sure your eyes are on an approximately horizontal level.

•

If you suffer from myopia (short-sightedness), hyperopia (far-sightedness), astigmatism, or

•

have eyesight differences between the left and right eyes, please use corrective glasses or other such methods to correct your eyesight before putting on the 3D Eyewear. Stop using the 3D Eyewear if you can clearly see double images when viewing 3D content.

•

Prolonged use may cause eyesight fatigue.

View the screen at a distance at least 3 times further than the effective height of the screen.

•

Recommended distance: For a 42-inch television, 1.6 m or more. For a 50-inch television, 1.9 m or more. Using the 3D Eyewear at a distance closer than the recommended distance may cause eyesight fatigue.

Using 3D Eyewear

As a guide, 3D Eyewear should not be used by children younger than about 5 - 6 years old.

•

As it is difficult to judge younger children’s reactions to fatigue or discomfort, it may be difficult to prevent them from suddenly feeling unwell.

• When this product is being used by a child, the parent or guardian should check to ensure that the child’s eyes are not becoming tired.

When using the 3D Eyewear, do not place breakable objects near to the user.

•

The user may mistake the 3D objects they are viewing as real objects causing them to move, which may cause damage to surrounding objects that may lead to injury.

Do not move around while wearing the 3D Eyewear.

•

The surrounding area appears dark, which may result in falling or other accidents that may cause injury.

Viewing 3D images

Only use the 3D Eyewear for the specified purpose.

•

Do not use if the 3D Eyewear is cracked or broken.

•

Doing so may result in injury or eyesight fatigue.

If a malfunction or fault occurs in the 3D Eyewear, stop use immediately.

•

Continuing to use the 3D Eyewear may result in injury, eyesight fatigue, or may cause you to feel unwell.

Stop using the 3D Eyewear immediately if your skin feels unusual.

•

In rare cases, the paint or materials used in the 3D Eyewear may cause an allergic reaction.

Stop using the 3D Eyewear immediately if you experience any redness, pain, or itching on the

•

nose or temples.

Prolonged use may cause such symptoms due to excess pressure, which may result in the user feeling unwell.

3D Eyewear

3D Eyewear set (2)

TY-EW3D2MA

•

3D Eyewear

only for TH-P42VT30Q,

(

•

(for others)

•

TH-P50VT30Q

N5ZZ00000223

N5ZZ00000224

3D Eyewear can be worn over vision correction glasses.

3D Eyewear case Charging cable Ferrite core

)

supplied: TH-P42VT30Q,

(

TH-P50VT30Q

)

Part names and functions

12 34 5

1 Infra-red receiver

Receives infra-red signals from the television. The liquid crystal shutter open/close timing is controlled by receiving infrared signals from the television, which provide 3D expression of the images. If the eyewear stops receiving infra-red signal from the television, the power automatically switches off after 5 minutes.

2 Liquid Crystal Shutter (Lens)

Controls the images for 3D viewing. The left and right liquid crystal shutters are alternately opened and closed in time with the left side and right side images that are alternately displayed on the television to achieve the 3D effect.

3 Power switch (bottom side of 3D Eyewear)

Switches on the 3D Eyewear power. The 3D Eyewear is turned on by setting the power switch to “ON”. Set the power switch to “OFF” to turn off the 3D Eyewear.

4 Indicator lamp

Lights or flashes during use or charging to show the status of the rechargeable battery.

5 Charging port

Connect the charging cable. (p. 28)

■ Battery status shown by indicator lamp

Power/indicator lamp status Battery status

Lights for 2 seconds when turned on Sufficient battery level Flashes 5 times when turned on Low battery level Flashes once every 2 seconds when in use Operating normally Lights continuously when off Charging Lamp off Power off

Viewing 3D images

Using Precautions

Liquid Crystal Shutter (Lens)

Do not apply pressure to the liquid crystal shutter. Also, do not drop or bend the 3D Eyewear.

•

Do not scratch the surface of the liquid crystal shutter with a pointed instrument etc. Doing so

•

may cause damage to the 3D Eyewear, and reduce the quality of the 3D image.

Infra-red receiver section

Do not soil the infra-red receiver section or attach stickers etc. to it.

•

• Doing so may prevent the receiver from receiving signals from the television, which may prevent the 3D Eyewear from operating normally.

If the 3D Eyewear is affected by other infra-red data communication equipment, the 3D images

•

may not be displayed correctly.

Cautions during viewing

Do not use devices that emit strong electromagnetic waves (such as cellular phones or personal

•

transceivers) near the 3D Eyewear. Doing so may cause the 3D Eyewear to malfunction. The 3D Eyewear cannot operate fully at high or low temperatures.

•

Please use within the specified usage temperature range. (p. 88) If the 3D Eyewear is used in a room in which fluorescent lights (50 Hz) are used, the light within

•

the room may appear to be flickering. In this case, either darken or switch off the fluorescent lights when using the 3D Eyewear. Wear the 3D Eyewear correctly. 3D images will not be correctly visible if the 3D Eyewear is worn

•

upside down or back-to-front. Other kinds of displays (such as computer screens, digital clocks, or calculators etc.) may

•

be difficult to see while wearing the 3D Eyewear. Do not wear the 3D Eyewear when watching anything other than 3D images.

+ 61 hidden pages