Panasonic TH-80LF50E, TH-70LF50E User Manual

Download

Page 1

Operating Instructions

FULL HD LCD Display

Model No.

TH-70LF50E TH-80LF50E

English

Please read these instructions before operating your set and retain them for future reference.

Page 2

Dear Panasonic Customer

Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new LCD Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and note down the model number and serial number of your set in the space provided on the rear cover of these instructions. Visit our Panasonic Web Site http://panasonic.net

Table of Contents

Important Safety Notice ........................................... 3

Safety Precautions ................................................... 4

Accessories .............................................................. 7

Accessories Supply ................................................. 7

Remote Control Batteries ........................................ 7

Ceiling Suspension .................................................. 8

Connections .............................................................. 9

AC cord connection and  xing, cable  xing ............. 9

Video equipment connection ................................. 10

AUDIO OUT connection ........................................ 10

VIDEO, COMPONENT / RGB IN and HDMI

connection ..............................................................11

DVI-D IN, DVI-D OUT connection ......................... 12

PC Input Terminals connection .............................. 13

SERIAL Terminals connection ............................... 14

Power On / Off ......................................................... 16

Selecting the input signal ...................................... 18

Basic Controls ........................................................ 19

ASPECT Controls ................................................... 21

Digital Zoom ............................................................ 22

On-Screen Menu Displays ..................................... 23

Adjusting Pos. /Size ............................................... 24

Picture Adjustments ............................................... 26

Advanced settings ................................................. 27

Sound Adjustment .................................................. 28

SDI Sound Output ................................................. 28

PRESENT TIME Setup / Set up TIMER .................. 29

PRESENT TIME Setup .......................................... 29

Set up TIMER ........................................................ 30

Screensaver (For preventing image retention) .... 31

Setup of Screensaver Time ................................... 32

Wobbling ................................................................. 32

No activity power off .............................................. 33

ECO Mode settings ................................................. 34

Customizing the Input labels ................................. 35

Selecting the On-Screen Menu Language ............ 36

Customizing the On-Screen Menu Display .......... 36

Setup for MULTI DISPLAY ...................................... 37

How to Setup MULTI DISPLAY ............................. 37

ID Remote Control Function .................................. 38

Setup for Input Signals .......................................... 39

Component / RGB-in select ................................... 39

YUV / RGB-in select .............................................. 39

Signal menu .......................................................... 40

3D Y/C Filter .......................................................... 40

Colour system ....................................................... 41

Cinema reality ....................................................... 41

XGA Mode ............................................................. 41

Noise reduction ..................................................... 42

Sync ...................................................................... 42

HDMI Range .......................................................... 42

Input signal display ................................................ 43

Network Setup ........................................................ 44

Options Adjustments ............................................. 45

Input Search .......................................................... 47

Using Network Function ........................................ 48

Example of Network Connection ........................... 48

Command Control ................................................. 48

PJLink™ Protocol .................................................. 49

Using Web Browser Control .................................. 50

Before Using Web Browser Control....................... 50

Access from Web Browser .................................... 50

Display Control (BASIC CONTROL/OPTION

CONTROL Screen) ............................................... 51

NETWORK SETTING (Network Setup Screen) .... 52

Password Setting (Password Setup Screen) ........ 52

Troubleshooting ..................................................... 53

Applicable Input Signals ........................................ 54

Shipping condition ................................................. 56

Speci cations ......................................................... 57

Trademark Credits

• VGA is a trademark of International Business Machines Corporation.

• Macintosh is a registered trademark of Apple Inc., USA.

• SVGA, XGA, SXGA and UXGA are registered trademarks of the Video Electronics Standard Association. Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected.

• HDMI, the HDMI Logo, and High-De nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Note:

Image retention may occur. If you display a still picture for an extended period, the image might remain on the screen. However, it will disappear after a while.

Page 3

Important Safety Notice

IMPORTANT: THE MOULDED PLUG

WARNING

1) To prevent damage which may result in  re or shock hazard, do not expose this appliance to dripping

or splashing.

Do not place containers with water ( ower vase, cups, cosmetics, etc.) above the set. (including on

shelves above, etc.)

No naked  ame sources, such as lighted candles, should be placed on / above the set.

2) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to quali ed

service personnel.

3) Do not remove the earthing pin on the power plug. This apparatus is equipped with a three pin earthing-type

power plug. This plug will only  t an earthing-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician.

Do not defeat the purpose of the earthing plug.

4) To prevent electric shock, ensure the earthing pin on the AC cord power plug is securely connected.

CAUTION

This appliance is intended for use in environments which are relatively free of electromagnetic  elds. Using this appliance near sources of strong electromagnetic  elds or where electrical noise may overlap with the input signals could cause the picture and sound to wobble or cause interference such as noise to appear. To avoid the possibility of harm to this appliance, keep it away from sources of strong electromagnetic  elds.

FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.

This display is supplied with a moulded three pin mains plug for your safety and convenience. A 10 amp fuse is  tted in this plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating of 10 amps and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark

If the plug contains a removable fuse cover, you must ensure that it is re tted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic dealer.

Do not cut off the mains plug. Do not use any other type of mains lead except the one supplied with this display. The supplied mains lead and moulded plug are designed to be used with this display to avoid interference and for your safety. If the socket outlet in your home is not suitable, get it changed by a quali ed electrician. If the plug or mains lead becomes damaged, purchase a replacement from an authorized dealer.

WARNING : — THIS DISPLAY MUST BE EARTHED.

How to replace the fuse.

IMPORTANT: THE MOULDED PLUG

or the BSI mark on the body of the fuse.

ASA

Open the fuse compartment with a screwdriver and replace the fuse.

Page 4

Safety Precautions

WARNING

Setup

This LCD Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury.

(All of the following accessories are manufactured by Panasonic Corporation.)

• Pedestal ....................................................... TY-ST58P20 (for TH-70LF50E)

TY-ST65P20 (for TH-80LF50E)

• Wall-hanging bracket (vertical) ..................... TY-WK70PV50

• HD-SDI Terminal Board with audio .............. TY-FB10HD

• Protective Glass ........................................... TY-PG70LF50 (for TH-70LF50E)

TY-PG80LF50 (for TH-80LF50E)

Always be sure to ask a quali ed technician to carry out set-up.

Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from being played with by young children, creating the potential risk of suffocation.

Do not place the Display on sloped or unstable surfaces, and ensure that the Display does not hang over the edge of the base.

• The Display may fall off or tip over.

Do not place any objects on top of the Display.

• If water is spills onto the Display or foreign objects get inside it, a short-circuit may occur which could result in  re

or electric shock. If any foreign objects get inside the Display, please consult your local Panasonic dealer.

Transport only in upright position!

• Transporting the unit with its display panel facing upright or downward may cause damage to the internal

circuitry.

Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table cloths and curtains.

For suf cient ventilation; Leave a space of 10 cm or more at the top, left and right, and 7 cm or more at the rear, and also keep the space between the bottom of the display and the  oor surface.

Cautions for Wall Installation

• Wall installation should be performed by an installation professional. Installing the Display incorrectly may lead to

an accident that results in death or serious injury. Use the speci ed accessories.

• When installing the Display vertically, be sure to install the power indicator onto the top of the Display.

Caution for Ceiling Suspension

• Ceiling suspension should be performed by an installation professional. Installing the Display incorrectly may lead

to an accident that results in death or serious injury.

Do not install the product to a place where the product is exposed to direct sunlight.

• If the screen is exposed to direct sunlight, the liquid crystal panel may have adverse effect.

Page 5

Safety Precautions

When using the LCD Display

The Display is designed to operate on 220 - 240 V AC, 50/60 Hz.

Do not cover the ventilation holes.

• Doing so may cause the Display to overheat, which can cause  re or damage to the Display.

Do not stick any foreign objects into the Display.

• Do not insert any metal or  ammable objects into the ventilations holes or drop them onto the Display, as doing so can cause  re or electric shock.

Do not remove the cover or modify it in any way.

• High voltages which can cause severe electric shocks are present inside the Display. For any inspection, adjustment and repair work, please contact your local Panasonic dealer.

Ensure that the mains plug is easily accessible.

An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing connection.

Do not use any power supply cord other than that provided with this unit.

• Doing so may cause  re or electric shocks.

Securely insert the power supply plug as far as it will go.

• If the plug is not fully inserted, heat may be generated which could cause  re. If the plug is damaged or the wall socket is loose, they shall not be used.

Do not handle the power supply plug with wet hands.

• Doing so may cause electric shocks.

Do not do anything that may damage the power cable. When disconnecting the power cable, pull on the plug body, not the cable.

• Do not damage the cable, make any modi cations to it, place heavy objects on top of it, heat it, place it near any hot objects, twist it, bend it excessively or pull it. To do so may cause  re and electric shock. If the power cable is damaged, have it repaired at your local Panasonic dealer.

If the Display is not going to be used for any prolonged length of time, unplug the power supply plug from the wall outlet.

To prevent the spread of  re, keep candles or other open  ames away from this product at all times.

If problems occur during use

If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odour starts to come out from the Display, immediately unplug the power supply plug from the wall outlet.

• If you continue to use the Display in this condition,  re or electric shock could result. After checking that the smoke has stopped, contact your local Panasonic dealer so that the necessary repairs can be made. Repairing the Display yourself is extremely dangerous, and shall never be done.

If water or foreign objects get inside the Display, if the Display is dropped, or if the cabinet becomes damages, disconnect the power supply plug immediately.

A short circuit may occur, which could cause  re. Contact your local Panasonic dealer for any repairs that need to be made.

•

Page 6

Safety Precautions

CAUTION

When using the LCD Display

Do not bring your hands, face or objects close to the ventilation holes of the Display.

• Heated air comes out from the ventilation holes at the top of Display will be hot. Do not bring your hands or face, or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result.

Be sure to disconnect all cables before moving the Display.

• If the Display is moved while some of the cables are still connected, the cables may become damaged, and  re or electric shock could result.

Disconnect the power supply plug from the wall socket as a safety precaution before carrying out any cleaning.

• Electric shocks can result if this is not done.

Clean the power cable regularly to prevent it becoming dusty.

• If dust built up on the power cord plug, the resultant humidity can damage the insulation, which could result in  re. Pull the power cord plug out from the wall outlet and wipe the mains lead with a dry cloth.

Do not burn or breakup batteries.

• Batteries must not be exposed to excessive heat such as sunshine,  re or the like.

Cleaning and maintenance

The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth.

• If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water in which neutral detergent has been diluted 100 times, and then wipe it evenly with a dry cloth of the same type until the surface is dry.

• Do not scratch or hit the surface of the panel with  ngernails or other hard objects, otherwise the surface may become damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the surface may be adversely affected.

If the cabinet becomes dirty, wipe it with a soft, dry cloth.

• If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been added and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.

• Do not allow any detergent to come into direct contact with the surface of the Display. If water droplets get inside the unit, operating problems may result.

• Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact with articles made from rubber or PVC.

Usage of a chemical cloth

• Do not use a chemical cloth for the panel surface.

• Follow the instructions for the chemical cloth to use it for the cabinet.

Page 7

Accessories

Accessories Supply

Check that you have the accessories and items shown

Operating Instruction book CD-ROM

(Operating instructions)

Power supply cord Clamper × 1

Remote Control Transmitter N2QAYB000691

TMME289

Remote Control Batteries

Batteries for the Remote Control Transmitter (R6 (UM3) Size × 2)

Requires two R6 batteries.

1. Pull and hold the hook, then open the battery cover.

2. Insert batteries - note correct polarity ( + and -).

“R6 (UM3)” size

3. Replace the cover.

Helpful Hint:

For frequent remote control users, replace old batteries with Alkaline batteries for longer life.

Precaution on battery use

Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter. Disposal of batteries should be in an environment-friendly manner.

Observe the following precaution:

1. Batteries shall always be replaced as a pair. Always use new batteries when replacing the old set.

2. Do not combine a used battery with a new one.

3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).

4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries. Battery replacement is necessary when remote control acts sporadically or stops operating the Display set.

6. Do not burn or breakup batteries.

Batteries must not be exposed to excessive heat such as sunshine,  re or the like.

Page 8

Ceiling Suspension

You can install the Display by attaching commercially available eyebolts (M10) to it and suspending it from the ceiling, etc.

Eyebolt mounting positions (for horizontal installation)

Notes:

• Suspension and installation should be performed by an installation professional.

• Do not install it using only one eyebolt.

• When the Display is installed horizontally, make sure to place the power Indicator side down and, face up the power Indicator side, when it is installed vertically. Install the wire along the vertical side when suspending

• the Display.

Eyebolt mounting positions (for vertical installation)

Page 9

Connections

AC cord connection and  xing, cable  xing

AC cord  xing

Unplug the AC cord

Unplug the AC cord pressing the

Plug the AC cord into the display unit.

Plug the AC cord until it clicks.

Note:

Make sure that the AC cord is locked on both the left and right sides.

Using the clamper

Secure any excess cables with clamper as required.

Note:

One clamper is supplied with this unit. In case of securing cables at four positions, please purchase it separately.

TH-70LF50E TH-80LF50E

two knobs.

Note:

When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet  rst.

Attach the clamper

Insert the clamper in a hole.

hole

To remove from the unit:

snaps

Keep pushing both side snaps

Bundle the cables

hooks

Set the tip in the hooks

To loosen:

knob

Keep pushing the knob

Page 10

Connections

Video equipment connection

Ex. TH-80LF50E

AV IN HDMI

HDMI Input Terminal

(see page 11)

SERIAL IN, SERIAL OUT

SERIAL Input/Output Terminal Control the Display by connecting to PC. (see page 14)

DVI-D IN, DVI-D OUT

DVI-D Input/ Output Terminal (see page 12)

PC IN

PC Input Terminal (see page 13)

AUDIO IN (COMPOSITE)

Connect the audio output of a device connected to VIDEO. (see page 11)

AUDIO IN (DVI-D / PC)

Connect the audio output of a device connected to DVI-D IN, PC IN. (see page 12, 13)

LAN: Connect to

a network to control the unit. (see page 48)

VIDEO

Composite Video Input Terminal (see page 11)

COMPONENT/RGB IN

Component/RGB Video Input Terminal (see page 11)

AUDIO OUT

Connect to sound equipment (see page 10)

AUDIO OUT connection

Note:

Additional equipment and cables shown are not supplied with this set.

Stereophonic sound code

AUDIO IN (COMPONENT / RGB)

Connect the audio output of a device connected to COMPONENT/RGB IN. (see page 11)

audio equipment

line-in

Page 11

Connections

VIDEO, COMPONENT / RGB IN and HDMI connection

Note:

Additional equipment, cables and adapter plugs shown are not supplied with this set.

[Pin assignments and signal names for HDMI terminal]

DVD Player

VIDEO OUT

VCR

AUDIO OUT

Pin No.

Signal Name

T.M.D.S Data2+

T.M.D.S Data2

Shield

T.M.D.S Data2-

T.M.D.S Data1+ T.M.D.S Data1

Shield

T.M.D.S Data1-

T.M.D.S Data0+ T.M.D.S Data0

Shield

T.M.D.S Data0-

T.M.D.S Clock+

Pin No.

Signal Name

T.M.D.S Clock

Shield

T.M.D.S Clock-

CEC

Reserved

(N.C. on device)

SCL

SDA DDC/CEC

Ground

+5V Power

Hot Plug Detect

RCA-BNC Adapter plug

HDMI cables

HDMI

AV OUT

DVD player

Notes:

• Change the “Component/RGB-in select” setting in the “Setup” menu to “Component” (when Component signal connection) or “RGB” (when RGB signal connection). (see page

39)

• Accepts only RGB signals from COMPONENT/RGB IN terminal with “Sync on G”.

RCA-BNC Adapter plug

Y P

B PR OUT

AUDIO OUTRGB OUT

DVD PlayerComputer RGB Camcorder

Page 12

Connections

DVI-D IN, DVI-D OUT connection

PC with DVI-D video out

Shared with PC IN.

DVI-video cable (Within 5 m)

Stereo mini plug (M3)

Daisy chain connection

When using the multi display, multiple LCD Displays can be daisy chained.

First LCD Display Second LCD Display

PC with DVI-D video out

Third and subsequent

* DVI-video cable

LCD Displays

Notes:

• Up to 10 displays can be connected with a daisy chain, but the number of the connected displays may be limited by a cable, signal or equipment to use.

• HDCP signals can be processed, with up to 8 displays connected via a daisy chain connection.

DVI-D Input/Output Connector Pin Layouts

Connection port view

Pin No.

Signal Name

T.M.D.S. data 2-

T.M.D.S. data 2+

T.M.D.S. data 2 shield

3 4 5

DDC clock

DDC data

7 8

T.M.D.S. data 1-

T.M.D.S. data 1+

T.M.D.S. data 1 shield

11 12 24

Pin No.

13 14 15 16 17 18 19 20 21 22 23

Signal Name

+5 V DC Ground Hot plug detect T.M.D.S. data 0T.M.D.S. data 0+ T.M.D.S. data 0 shield

T.M.D.S. clock shield T.M.D.S. clock+ T.M.D.S. clock-

Note:

• Additional equipment and cables shown are not supplied with this set.

Page 13

PC Input Terminals connection

(Female)

COMPUTER

Connections

Conversion adapter (if necessary)

Audio

Stereo mini plug (M3)

Connect a cable which matches the audio output terminal on the computer.

(Male)

RGB

Mini D-sub 15p

Shared with DVI-D IN.

Notes:

• Computer signals which can be input are those with a horizontal scanning frequency of 30 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)

• The display resolution is a maximum of 1,440 × 1,080 dots when the aspect mode is set to “4:3”, and 1,920 × 1,080 dots when the aspect mode is set to “16:9”. If the display resolution exceeds these maximums, it may not be possible to show  ne detail with suf cient clarity.

• The PC input terminals are DDC2B-compatible. If the computer being connected is not DDC2B-compatible, you will need to make setting changes to the computer at the time of connection.

• Some PC models cannot be connected to the set.

• There is no need to use an adapter for computers with DOS/V compatible Mini D-sub 15P terminal.

• The computer shown in the illustration is for example purposes only.

• Additional equipment and cables shown are not supplied with this set.

• Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the speci ed frequency range.

Signal Names for Mini D-sub 15P Connector

Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name

3 9 4 5

15 14 13 12 11

6 7 8

Pin Layout for PC Input Terminal

NC (not connected)

GND (Ground)

+5 V DC

GND (Ground)

NC (not connected)

HD/SYNC

SDA

SCL

Page 14

Connections

SERIAL Terminals connection

The SERIAL terminal is used when the Display is controlled by a computer. Note: To use serial control for this unit, make sure to set the “Control I/F Select” in the “Network Setup” menu to

“RS-232C”. (see page 44)

COMPUTER

RS-232C Straight cable

(Female)

D-sub 9p

In addition, a particular LCD Display can be controlled with a PC while several LCD Displays are daisy chained.

COMPUTER

(Male)

D-sub 9p

(Female)

First LCD Display (Male)

(Female)(Female)

* RS-232C Straight cable

Second LCD Display (Male)

(Female) (Female)

Third LCD Display (Male)

Notes:

• Use the RS-232C straight cable to connect the computer to the Display.

• The computer shown is for example purposes only.

• Additional equipment and cables shown are not supplied

1 3 4 5 2

6 7 8 9

with this set.

• When using daisy chain, set ”Serial Daisy Chain” in the Options menu. (see page 46)

Pin layout for SERIAL Terminal

• For daisy chain connection, use a straight cable connected

to pins numbered

through 8.

The SERIAL terminal conforms to the RS-232C interface speci cation, so that the Display can be controlled by a computer which is connected to this terminal. The computer will require software which allows the sending and receiving of control data which satis es the conditions given below. Use a computer application such as programming language software. Refer to the documentation for the computer application for details.

Communication parameters

Signal level RS-232C compliant

Synchronization method Asynchronous

Baud rate 9600 bps

Parity None

Character length 8 bits

Stop bit 1 bit

Flow control -

Signal names for SERIAL IN terminal

Pin No. Details

2 3 4 5 6 7

•

(Shorted in this set)

R X D T X D

DTR GND DSR

These signal names are those of computer speci cations.

Page 15

Connections

Basic format for control data

The transmission of control data from the computer starts with a STX signal, followed by the command, the parameters, and lastly an ETX signal in that order. If there are no parameters, then the parameter signal does not need to be sent.

STX C1 C2 C3 P1 P2 P3 P4: P5 ETX

Start (02h)

Colon Parameter(s) 3-character command (3 bytes)

(1 - 5 bytes)

End (03h)

Notes:

• If multiple commands are transmitted, be sure to wait for the response for the  rst command to come from this unit before sending the next command.

• If an incorrect command is sent by mistake, this unit will send an “ER401” command back to the computer.

• Consult an Authorized Service Center for detail instructions on command usage.

• S1A and S1B of Command IMS are available only when a dual input terminal board is attached.

Command

Command Parameter Control details PON None Power ON POF None Power OFF AVL *** Volume 000 - 100

AMT

IMS None

DAM None

0 Audio MUTE OFF 1 Audio MUTE ON

Input select (toggle) SL1 S1A S1B AV1 AV2

HM1 DV1 PC1

ZOOM FULL NORM ZOM2

SLOT input (SLOT INPUT)

SLOT input (SLOT INPUT A)

SLOT input (SLOT INPUT B)

VIDEO input (VIDEO)

COMPONENT/RGB IN input

(Component)

HDMI input (HDMI)

DVI-D IN input (DVI)

PC IN input (PC)

Screen mode select (toggle)

Zoom1

16:9

4:3

Zoom2

With the power off, this display responds to PON command only.

Page 16

Power On / Off

Connecting the AC cord plug to the Display.

Connecting the plug to the Wall Outlet

Notes:

• Main plug types vary between countries. The power plug shown at right may, therefore, not be the type  tted to your set.

• When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet  rst.

Press the Power switch on the Display to turn the set on: Power-On.

Power switch

Power Indicator: Green

Press the button on the remote control to turn the Display off.

Power Indicator: Red (standby)

Press the

Power Indicator: Green

Turn the power to the Display off by pressing the the Display is on or in standby mode.

Note:

During operation of the power management function, the power indicator turns orange in the power off state.

Power Indicator Remote Control Sensor

button on the remote control to turn the Display on.

switch on the unit, when

Page 17

When  rst switching on the unit

Following screen will be displayed when the unit is turned on for the  rst time. Select the items with the remote control. Unit buttons are invalid.

OSD Language

Select the language.

Set.

PRESENT TIME Setup

Select “DAY” or “PRESENT TIME”.

Setup “DAY” or “PRESENT TIME”.

Power On / Off

OSD Language

English (UK)

Deutsch

Français

Italiano

Español

ENGLISH (US)

PRESENT TIME Setup

PRESENT TIME MON 99 : 99

Set DAY PRESENT TIME

MON

99 : 99

Select “Set”.

Set.

PRESENT TIME Setup

PRESENT TIME MON 99 : 99

Set DAY PRESENT TIME

TUE

10 : 00

Notes:

• Once the items are set, the screens won't be displayed when switching on the unit next time.

• After the setting, the items can be changed in the following menus. OSD Language (see page 36) PRESENT TIME Setup (see page 29)

Power ON warning message

The following message may be displayed when turning the unit power ON:

No activity power off Precautions

’No activity power off’ is enabled.

If “No activity power off” in Setup menu is set to “Enable”, a warning message is displayed every time the power is turned ON. (see page 33)

This message display can be set with the following menu: Options menu

Power On Message (see page 47)

Page 18

Selecting the input signal

Press to select the input signal to be played back from the equipment which has been connected to the Display.

Input signals will change as follows:

VIDEO DVI

HDMI: HDMI input terminal in AV IN (HDMI). VIDEO: Video input terminal in VIDEO. Component*: Component or RGB input terminal in COMPONENT/RGB IN. PC: PC input terminal in PC IN. DVI: DVI input terminal in DVI-D IN. * “Component” may be displayed as “RGB” depending on the setting of

“Component/RGB-in select”. (see page 39)

When an optional Terminal Board is installed:

HDMI

SLOT INPUT: Input terminal in Terminal Board

Note:

When a Terminal Board incompatible with the Display is installed, “Non-Compatible Function Board” is displayed.

PCHDMI Component*

ComponentSLOT INPUT

PCVIDEO

DVI

When a Terminal Board with dual input terminals is installed:

SLOT INPUT A

SLOT INPUT BHDMI

SLOT INPUT A, SLOT INPUT B: Dual input terminal in Terminal Board.

Notes:

• Selecting is also possible by pressing the INPUT button on the unit.

• Select to match the signals from the source connected to the component/RGB input terminals. (see page 39)

VIDEO Component

PC DVI

ENTER/

VOL

INPUT

Page 19

Basic Controls

Main Unit

Remote control sensor

Power Indicator

The Power Indicator will light.

• Power-OFF .... Indicator not illuminated (The unit will still

consume some power as long as the power cord is still inserted into the wall outlet.)

• Standby ........ Red

Orange (When “Slot power” is set to “On”. See page 46) Orange (Depending on the type of the function board installed, when the power is supplied to the slot) Orange (When “Control I/F Select” is set to “LAN”. See page 44)

• Power-ON ...... Green

• PC Power management (DPMS)

......................... Orange (With PC input signal. See page 34)

• DVI-D Power management

......................... Orange (With DVI input signal. See page 34)

Brightness Sensor

Detects the brightness in the viewing environment.

ENTER/

VOL

INPUT

SLOT: Terminal board (optional accessories) insert

slot (see page 4 )

Note:

The upper side slot is for terminal board with 2-slot width. The terminal board with 1-slot width does not function when installed in the upper side slot.

Enter / Aspect button

(see page 21, 23)

Volume Adjustment

Volume Up “+” Down “–” When the menu screen is displayed: “+” : press to move the cursor up

press to move the cursor down

“–” : (see page 23)

MENU Screen ON / OFF

Each time the MENU button is pressed, the menu screen will switch. (see page 23)

Normal Viewing Picture

Sound Pos. /Size

Setup

INPUT button (INPUT signal selection)

(see page 18)

Main Power On / Off Switch

Page 20

Basic Controls

Remote Control Transmitter

ACTION button

Press to make selections.

ASPECT button

Press to adjust the aspect. (see page 21)

Standby (ON / OFF) button

The Display must  rst be plugged into the wall outlet and turned on at the power switch (see page 16). Press this button to turn the Display On, from Standby mode. Press it again to turn the Display Off to Standby mode.

POS. /SIZE button

(see page 24, 25)

PICTURE button (see page 26, 27)

Sound mute On / Off Press this button to mute the sound. Press again to reactivate sound. Sound is also reactivated when power is turned off or volume level is changed.

OFF TIMER button

The Display can be preset to switch to stand-by after a  xed period. The setting changes to 30 minutes, 60 minutes, 90 minutes and 0 minutes (off timer cancelled) each time the button is pressed.

30 min 60 min

90 min

0 min

When three minutes remain, “Off timer 3 min” will  ash. The off timer is cancelled if a power interruption occurs.

AUTO SETUP button

Automatically adjusts the position/ size of the screen. (see page 24)

SET UP button (see page 29 - 44)

SOUND button (see page 28)

Volume Adjustment

Press the Volume Up “+” or Down “–” button to increase or decrease the sound volume level.

R button (see page 23) Press the R button to return to previous menu screen.

N button (see page 25, 26, 27, 28)

POSITION buttons

INPUT button

Press to select Input signal sequentially. (see page 18)

ECO MODE (ECO)

Press to change the ECO MODE setup status. (see page 34)

FUNCTION buttons (FUNCTION)

(see page 47)

RECALL button

Press the “RECALL” button to display the current system status.

Input label

Aspect mode (see page 21)

Off timer

The off timer indicator is

displayed only when the off timer has been set.

Clock Display (see page 46)

PC 4:3

10:00

Off timer

90min

1 2

Digital Zoom (see page 22)

Page 21

ASPECT Controls

The Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture.

Note:

Be aware that if you put the display in a public place for commercial purposes or a public showing and then use the aspect mode select function to shrink or expand the picture, you may be violating the copyright under copyright law. It is prohibited to show or alter the copyrighted materials of other people for commercial purposes without the prior permission of the copyright holder.

Press repeatedly to move through the aspect options:

4:3 Zoom1 16:9Zoom2

[from the unit]

Right side surface

ENTER/

VOL

The aspect mode changes each time the ENTER button is pressed.

Note:

The aspect mode is memorized separately for each input terminal.

Aspect mode

16:9

4:3

Zoom1

Zoom2

Picture

Enlarged screen

The display of the pictures  lls the screen. In the case of SD signals, pictures with a 4:3 aspect ratio are enlarged horizontally, and displayed. This mode is suited to displaying anamorphic pictures with a 16:9 aspect ratio.

Pictures with a 4:3 aspect ratio are displayed with their original aspect ratio. Side panels are displayed at the left and right edges of the screen.

The pictures with a 4:3 aspect ratio among the 16:9 aspect ratio signals are displayed with their original aspect ratio. The left and right edges of the pictures are masked with side panels.

Letterbox pictures with a 16:9 aspect ratio are enlarged vertically and horizontally so that their display  lls the screen. The top and bottom edges of the pictures are cut off.

Letterbox pictures with a 16:9 aspect ratio are enlarged vertically and horizontally so that their display  lls the screen. The top and bottom edges as well as the left and right edges of the pictures are cut off.

Description

Page 22

Digital Zoom

This displays an enlargement of the designated part of the displayed image.

Display the operation guide.

Press to access Digital Zoom. The operation guide will be displayed.

During Digital Zoom, only the following buttons can be operated.

[Remote control]

Select the area of the image to be enlarged.

Press on the enlargement location to select.

Exit

POSITION / ACTION button

The cursor will move.

Select the magni cation required for the enlarged display.

Each time this is pressed, the magni cation factor changes. This is shown in the image being displayed.

× 1 × 2 × 3 × 4

Return to normal display (quit Digital Zoom).

Press to exit from the Digital Zoom.

Notes:

• When power goes OFF (including “Off Timer” operation), Digital Zoom terminates.

• The Digital Zoom function cannot be selected while in the following operation state: When MULTI DISPLAY Setup is On (see page 37). When Screensaver is running (see page 31)

• While Digital Zoom is in operation, “Adjusting Pos. / Size” cannot be used.

Exit

Page 23

On-Screen Menu Displays

Remote Control Unit

Display the menu screen.

Select the item.

Picture

Normal

Normalise

Picture Mode Backlight Contrast Brightness Colour Tint Sharpness White balance

Advanced settings

100

70 50 50 50 50

Normal

(Example: Picture menu)

Set.

Press to select. (Example: Picture menu)

Select.

Adjust.

VOL

Press several times.

Each time the MENU button is pressed, the menu screen will switch.

Normal Viewing Picture

Sound Pos. /Size

ENTER/

VOL

ENTER/

Press.

Select.

Press.

Setup

Exit the menu.

Press.

Press

to return to the

previous menu.

VOL

Adjust.

Press several times.

Menu display list

Note: Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting.

Picture menu Setup menu Pos./Size menu Sound menu

Picture

Normal

Normalise

Picture Mode Backlight Contrast Brightness Colour Tint Sharpness White balance

Advanced settings

See page 26, 27

100

70 50 50 50 50

Normal

Setup

Signal

Screensaver

Input label

ECO Mode settings Wobbling Component/RGB-in select

No activity power off

OSD Language English(UK

MULTI DISPLAY Setup

Set up TIMER

PRESENT TIME Setup

Network Setup Menu Display Duration Menu Transparency

See page 29-44

Off

RGB

Disable

15 S

1/2

)

2/2Setup

Pos. /Size

Normal

Normalise

Auto Setup

H-Pos H-Size V-Pos V-Size Clock Phase Dot Clock 1:1 Pixel Mode

See page 24, 25

Normal 0 0 0

Channel 1 Channel 1

1/2

Off

2/2

Off Off

Sound

Normal

Normalise

Sound Mode

0 0 0 0 0 0

Off

Bass

Treble

Balance

Surround

SDI Sound Output

Left Channel

Right Channel

Sound Out

Level Meter

See page 28

Page 24

Adjusting Pos. /Size

Press to display the Pos. /Size menu.

Press to select the menu to adjust.

Press to adjust the menu.

Note:

If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture position will shift up or down. This picture position movement cannot be controlled by the Picture Pos./Size function.

Auto Setup

H-Pos/V-Pos, H-Size/V-Size, Dot Clock and Clock Phase are automatically adjusted when the RGB or PC signal is received. This setting only operates when a PC signal or RGB signal is input, and the aspect is “16:9”.

Using Remote Control

Press to exit from adjust mode.

Pos. /Size

Normalise

Auto Setup

H-Pos H-Size V-Pos V-Size Clock Phase Dot Clock 1:1 Pixel Mode

Notes:

Unadjustable items are grayed out. Adjustable items differ depending on the input signal and the display mode.

Normal

0 0 0 0 0 0

Off

When on the remote control is pressed, “Auto Setup” will be executed.

When Auto Setup does not work, “Invalid” is displayed.

Notes:

• Auto Setup may not work when a cropped or dark image is input. In such case, switch to a bright image with borders and other objects are clearly shown, and then try auto setup again.

• Depending on the signal, out of alignment may occur after Auto Setup. Carry out  ne tuning for the position/size as required.

• If Auto Setup cannot set properly for vertical frequency 60Hz XGA signal (1024×768@60Hz and 1366×768@60Hz), pre-selecting the individual signal in “XGA Mode” (see page 41) may results in correct Auto Setup.

• Auto Setup does not work well when a signal such as additional information is superimposed out of valid image period or intervals between synchronizing and image signals are short.

• If Auto Setup cannot adjust correctly, select “Normalise” once and press ACTION ( Pos. /Size manually.

• If the picture goes off screen in the horizontal direction as a result of performing Auto Setup, perform Dot Clock adjustment.

), then adjust

Page 25

Adjusting POS. /SIZE

H-Pos Adjust the horizontal position. V-Pos Adjust the vertical position.

H-Size Adjust the horizontal size. V-Size Adjust the vertical size.

Clock Phase

Dot Clock (During RGB and PC input signal)

Over scan Turn image over scan On/Off.

1:1 Pixel Mode

(During RGB and PC input signal)

Eliminate the  ickering and distortion.

Periodic striped pattern interference (noise) may occur when a striped pattern is displayed. If this happens, adjust so that any such noise is minimized.

Con gurable signals are as follows: 525i, 525p, 625i, 625p, 750/60p, 750/50p (Component Video, DVI, HDMI)

On Off

Notes:

• “Off” is effective during only “16:9” aspect mode.

• When “Off” is set, “H-Size” and “V-Size” cannot be adjusted.

Adjusts the display size when 1125i or 1125p signal is input.

Notes:

• “On” is effective during only “16:9” aspect mode.

• Select On when you would like to replay 1920 × 1080 input signal.

• Applicable input signal; 1125 (1080) / 50i · 60i · 24sF · 24p · 25p · 30p · 50p · 60p

• Select Off when  ickering is shown around the image.

• H-Size and V-Size cannot be adjusted when On is selected.

Off On

Helpful Hint ( /

While the Pos. / Size display is active, if either the N button on the remote control is pressed at any time or the ACTION ( ) button is pressed during “Normalise”, then all adjustment values (except “Clock Phase” and “Dot Clock”) are returned to the factory settings.

Normalise

Normalisation)

Page 26

Picture Adjustments

Select to adjust each item.

Picture

Normalise

Picture Mode Backlight Contrast Brightness Colour Tint Sharpness White balance

Advanced settings

Normal

Press to display the Picture menu.

Press to select the menu to adjust.

Select the desired level by looking at the picture behind the menu.

Note:

Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting.

Press “ ” or “ ” button to switch between modes.

100

70 50 50 50 50

Normal

Cinema

Normal

For viewing in standard (evening lighting) environments.

Dynamic

For viewing in brighter environments.

Press to enter Advanced settings .

Advanced settings Enables  ne picture adjustment at a professional level (see next page).

Advanced settings

Normalise

Input level Gamma AGC W/B High R W/B High G W/B High B W/B Low R W/B Low G W/B Low B

Normal

2.2

Off 50 50 50 50 50 50

Cinema

For use in viewing tone-focused pictures with brightness reduced.

Note:

If you would like to change the picture and colour

of the selected Picture menu to something else, adjust using the items in the Picture menu. (see next page)

Press “ ” or “ ” button to switch between modes.

Normal Warm Cool

Helpful Hint ( /

Normalise

Normalisation)

While the “Picture” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION (

) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.

Page 27

Picture Adjustments

Item Effect Adjustments

Backlight

Contrast

Darker

Less More

Brighter

Adjusts luminance of the back light.

Selects the proper brightness and density for the room.

Adjusts for easier viewing of

Brightness

Colour

Tint

Sharpness

Darker Brighter

Less More

Reddish Greenish

Less More

dark pictures such as night scenes and black hair.

Adjusts colour saturation.

Adjusts for nice skin colour.

Adjusts picture sharpness.

Advanced settings

Item Effect Details

Notes:

• “Colour” setting can be adjusted for Video input signal.

• You can change the level of each function (Backlight, Contrast, Brightness, Colour, Tint, Sharpness) for each Picture Mode.

• The setting details for normal, dynamic and cinema respectively are memorized separately for each input terminal.

• The “Tint” setting can be adjusted for NTSC signal only during Video input signal.

• “Backlight” can be adjusted when “ECO Mode” is set to “Custom” and “Power save” to “Off”. (see page 34)

Input level

Gamma

AGC

W/B High

W/B Low R

W/B Low G

W/B Low B

Less More

Down Up

Off On

Less More

Adjustment of parts which are extremely bright and hard to see.

S Curve 2.0 2.2 2.6

Increases the brightness of dark signal automatically.

Adjusts the white balance for light red areas.

Adjusts the white balance for light green areas.

Adjusts the white balance for light blue areas.

Adjusts the white balance for dark red areas.

Adjusts the white balance for dark green areas.

Adjusts the white balance for dark blue areas.

Notes:

• Carry out “W/B” adjustment as follows. Adjust the white balance of the bright sections using the “W/B High R”, “W/B High G” and “W/B High B” settings.

2. Adjust the white balance of the dark sections using the “W/B Low R”

, “W/B Low G”

and “W/B Low B” settings.

3. Repeat steps 1 and 2 to adjust.

Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.

• The adjustment values are memorized separately for each input terminal.

• The adjustment range values should be used as an adjustment reference.

Helpful Hint ( /

Normalise

Normalisation)

On the remote control unit, while the “Advanced settings” menu is displayed, if either the N button is pressed at any time or the ACTION (

) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.

Page 28

Sound Adjustment

Select to adjust each item.

Press to display the Sound menu.

Press to select the menu to adjust.

Sound

Normalise

Sound Mode Bass Treble Balance Surround

Select the desired level by listening to the sound.

Press to exit from adjust mode.

Item Details

Sound Mode

Bass Adjusts low pitch sounds.

Treble Adjusts high pitch sounds.

Balance Adjusts left and right volumes.

Surround Select On or Off.

Normal: Emits the original sound. Dynamic: Accentuates sharp sound. Clear: Attenuates human voice.

Note: Bass, Treble and Surround settings are memorized separately for each Sound Mode.

1/2

Normal

Normal 0 0 0

Off

Helpful Hint ( /

Normalise

Normalisation)

While the “Sound” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION (

) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.

SDI Sound Output

This menu is available only when selecting a slot that the following terminal board is installed: HD-SDI Terminal Board with audio (TY-FB10HD)

SDI Sound Output

Left Channel Right Channel Sound Out Level Meter

2/2

Channel 1 Channel 1

Off Off

Item Details

Left Channel

Right Channel

Sound Out

Level Meter

Channel 1 to Channel 16

Selects left audio channel.

Channel 1 to Channel 16

Selects right audio channel.

On On: Enables audio output. Off: Disables audio output.

Off

Sets audio channels to show in the audio level meter. 8 channels are displayed in the audio level meter; 4 channels each on both right and left sides of the display.

Off: Hides the audio level meter. 1-8ch: Displays the audio level meter (1-8ch) 9-16ch

Off

1-8ch 9-16ch

: Displays the audio level meter (9-16ch)

Page 29

PRESENT TIME Setup / Set up TIMER

The timer can switch the Display On or Off.

Before attempting Timer Set, con rm the PRESENT TIME and adjust if necessary. Then set POWER ON Time / POWER OFF Time.

Press to display the Setup menu.

Press to select Set up TIMER or PRESENT TIME Setup.

Press to display the Set up TIMER screen or PRESENT TIME Setup screen.

PRESENT TIME Setup

Press to select DAY or PRESENT TIME.

Press to setup DAY or PRESENT TIME.

button: Forward button: Back

Notes:

• Pressing “

Press to select Set.

” or “ ” button once changes PRESENT TIME 1 minute. ” or “ ” button continuously changes PRESENT TIME by 15 minutes.

Press to store PRESENT TIME Setup.

Notes:

• Set cannot be selected unless PRESENT TIME is set.

• Unless setting the present time other than “99:99”, “DAY” and “PRESENT TIME” can not be set.

• The settings of “DAY” and “PRESENT TIME” are reset when leaving the display turned off for about 7 days for the following reasons:

Pressing Disconnecting the AC cord. Interruption of power supply.

switch of the unit to turn off the display.

MULTI DISPLAY Setup

Set up TIMER

PRESENT TIME Setup

Network Setup Menu Display Duration Menu Transparency

PRESENT TIME Setup

PRESENT TIME MON 99 : 99

Set DAY PRESENT TIME

2/2Setup

15 S

MON

99 : 99

Page 30

PRESENT TIME Setup / Setup TIMER

Set up TIMER

Set the program for turning the power On/Off and select the input signal at the speci ed time. Up to 20 programs can be set.

[Setting Example]

Program 1, Every Monday, 12:00, Power On, Input: VIDEO

Set up TIMER

PRESENT TIME MON 0 : 03

Program Timer Function Day Power Mode Time Input

MON

Power On

12 : 00 VIDEO

select

adjust

Set the program number.

To execute the program, set to “On”.

The program is disabled when “Off” is set.

Set the day.

The program is executed every day when “Everyday” is se

Set the power On/Off.

Set the time.

Pressing “ Pressing “ 15 minutes.

Set the input.

” or “ ” button once changes “Time” 1 minute.

” or “ ” button continuously changes “Time” by

Notes:

• This function cannot be set unless “PRESENT TIME Setup” is set.

• If more than one programs are set for the same time, only the program with the smallest program number is enabled.

Page 31

Screensaver (For preventing image retention)

Do not display a still picture, especially in 4:3 mode, for any length of time. If the display must remain on, a Screensaver should be used. When the screen saver is operating, the following 5 patterns are displayed full screen for 5 seconds each.

BlackDark GrayGrayLight GrayWhite

Mode selection

Start setting

Press to display the Setup menu.

Press to select Screensaver.

Press to display Screensaver screen.

Off

Press to select Mode.

Press to select each mode items.

Interval

Time Designation

: Operates when Periodic Time and Operating

: Operates when Start Time and Finish Time

Standby after SCR Saver

: Operates while Screensaver duration, and

On : Operates when Start is selected and the

When the Mode is set to On, press to select Start.

Setup

Signal

Screensaver

Input label

ECO Mode settings Wobbling Component/RGB-in select

No activity power off

OSD Language English(UK

Screensaver

PRESENT TIME MON 0 : 02

Start

Mode

Off

RGB

Disable

Off

Time are setup and those times arrive.

are setup and those times arrive.

display enters standby mode.

ACTION (

) button is pressed.

1/2

)

Press to start Screensaver. The menu screen will disappear and the Screensaver will be activated. To stop the

Screensaver under On, press the R button or any buttons on the main unit.

Note: When the display is turned off, the Scrensaver will be deactivated.

Page 32

Screensaver (For preventing image retention)

Setup of Screensaver Time

After selecting Time Designation, Interval or Standby after SCR Saver, the relevant Time Setup will become available for selection and the Operating Time may be set. (Time cannot be set when “Mode” is “On” or “Off”.)

Press to select Start Time / Finish Time (When Time Designation is selected). Press to select Periodic Time / Operating Time (When Interval is selected). Press to select Screensaver duration (When Standby after SCR Saver is selected). Press to setup.

button: Forward button: Back

Notes:

• Pressing “

” or “ ” button once changes the Time 1 minute.

[However, switching occurs every 15 minutes when Periodic Time is selected.]

• Pressing “

” or “ ” button continuously changes the Time by 15 minutes.

• “Screensaver duration” of the “Standby after SCR Saver” can be set from 0:00 to 23:59. When this is set to “0:00”, “ Standby after SCR Saver” will not be activated.

Note: Timer function will not work unless “PRESENT TIME” is set.

Wobbling

Screensaver

PRESENT TIME MON 15 : 00

Start Mode Start Time Finish Time

PRESENT TIME MON 15 : 00

Start Mode Periodic Time Operating Time

PRESENT TIME MON 15 : 00

Start Mode Screensaver duration

Standby after SCR Saver

Time Designation

6 : 15

12 : 30

Interval

12 : 00

3 : 00

6 : 15

Automatically shifts the display image (therefore unnoticeable to the eye) to prevent image retention of sharper contour of image.

Press to display the Setup menu.

Press to select “Wobbling”.

Press to select “On” or “Off”. On: Shifts the position of the display image on a  xed

interval.

Press to exit from adjust mode.

time

Setup

Signal

Screensaver

Input label

ECO Mode settings Wobbling Component/RGB-in select

No activity power off

OSD Language English(UK

Off

RGB

Disable

1/2

)

Notes:

• If “MULTI DISPLAY Setup” is set to “On”, this function does not operate.

• When this function is operating, part of the screen may appear to be missing.

Page 33

No activity power off

Press to select the menu to adjust.

Press to select “Enable” or “Disable”.

Press to exit from Setup.

Setup

Signal

Screensaver

Input label

ECO Mode settings Wobbling Component/RGB-in select

No activity power off

OSD Language English(UK

Off

RGB

Disable

1/2

)

When this function is set to “Enable”, the power is turned off (standby) automatically when there is no operation of the Display for 4 hours. Starting from 3 minutes before the turn off, the remaining time will be displayed.

Press any key to abort.

No activity power off

When the power is turned off due to this function, a message “Last turn off due to ’No activity power off’.” is displayed next time the power is turned on.

Note:

During the screensaver is running, this function is disabled.

3min

Page 34

ECO Mode settings

Off

RGB

Disable

1/2

ECO Mode settings

)

ECO Mode

No Signal power off

PC Power management

DVI-D Power management

Power save

Custom

Disable

Off

Off Off

select

adjust

Setup

Signal

Screensaver

Input label

ECO Mode settings Wobbling Component/RGB-in select

No activity power off

OSD Language English(UK

ECO Mode

Custom: The menu of power consumption reduction is individually set. On: The following  xed values are set to the menu of power consumption reduction. Individual setting is not available.

No Signal power off: Enable PC Power management: On DVI-D Power management: On Power save: Sensor

Using Remote Control

When is pressed, the “ECO Mode” setting

changes.

ECO Mode On

Custom settings

The menu of the power consumption reduction is individually set. This setting is enabled when “ECO Mode” is set to “Custom”.

No signal power off

Equipment power supply is turned Off when there is no signal. When this is set to “Enable”, the power supply of the unit goes Off 10 minutes after the input signals stop.

Note:

This function is effective during normal viewing (one picture screen).

PC Power management

When this function is set to On, it operates under the following conditions to turn the power on or off automatically. When no pictures are detected for 30 or so seconds during PC signal input:  Power is turned off (standby); the power indicator lights up orange. When pictures are subsequently detected:  Power is turned on; the power indicator lights up green.

Notes:

• This function operates only during input from PC IN terminal.

• This function is effective when “Sync” is set to “Auto” and during normal viewing (one picture screen).

DVI-D Power management

When this function is set to On, it operates under the following conditions to turn the power on or off automatically. When no pictures (sync signal) are detected for 30 or so seconds during DVI signal input:  Power is turned off (standby); the power indicator lights up orange. When pictures (sync signal) are subsequently detected:  Power is turned on; the power indicator lights up green.

Note:

This function operates only during DVI signal input.

Power save

This function adjusts the brightness of the backlight to reduce power consumption.

Off: This function does not operate. On: Backlight brightness is reduced. Sensor: The backlight brightness is automatically adjusted according to the viewing environment. Note:

When this function is set to “On” or “Sensor”, the “Backlight” setting in the Picture menu is disabled.

Page 35

Customizing the Input labels

This function can change the label of the Input signal to be displayed. (see page 18)

Setup

1/2

Press to display the Setup menu.

Press to select Input label.

Press to display the Input label screen.

Press to select image input.

Wobbling Component/RGB-in select

No activity power off

OSD Language English(UK

Signal

Screensaver

Input label

ECO Mode settings

Off

RGB

Disable

)

Press to change input label.

Input label

SLOT INPUT VIDEO Component PC DVI HDMI

Image input Input label [SLOT INPUT]*1 SLOT INPUT / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip) [VIDEO] VIDEO / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip) [Component]*2 Component / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip) [PC] PC / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip) [DVI] DVI / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip) [HDMI] HDMI / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip)

SLOT INPUT

VIDEO

Component

DVI

HDMI

(Skip): The INPUT button press will skip its input.

*1 “SLOT INPUT” is displayed when a Terminal Board is installed. *2 “Component” may be displayed as “RGB” depending on the setting of “Component/RGB-in select”. (see page 39)

When a Terminal Board with dual input terminals is installed

“SLOT INPUT” is displayed as “SLOT INPUT A” and “SLOT INPUT B” and independent settings are available. [SLOT INPUT A] SLOT INPUT A / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip) [SLOT INPUT B] SLOT INPUT B / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip)

Page 36

Selecting the On-Screen Menu Language

Press to display the Setup menu.

Press to select the OSD Language.

Press to select your preferred language.

Selectable languages

English (UK)

Deutsch

Français

Italiano

Español

ENGLISH (US)

......(Chinese)

.......(Japanese)

Setup

Signal

Screensaver

Input label

ECO Mode settings

Wobbling Component/RGB-in select

No activity power off

OSD Language English(UK

Off

RGB

Disable

1/2

)

.......(Russian)

Customizing the On-Screen Menu Display

Set the display time and background transparency of the on-screen menu display.

Press to display the Setup menu.

Press to select “Menu Display Duration”.

Press to adjust the display duration.

Press to select “Menu Transparency”.

Press to adjust the transparency.

MULTI DISPLAY Setup

Set up TIMER

PRESENT TIME Setup

Network Setup Menu Display Duration Menu Transparency

2/2Setup

15 S

Press to exit from adjust mode.

Page 37

Setup for MULTI DISPLAY

By lining up the Displays in groups, for example, as illustrated below, an enlarged picture may be displayed across all screens. For this mode of operation, each display has to be set up with a Display number to determine its location.

(Example)

group of 16 (4 × 4)group of 4 (2 × 2) group of 9 (3 × 3) group of 25 (5 × 5)

How to Setup MULTI DISPLAY

Press to display the Setup menu.

Press to select the MULTI DISPLAY Setup.

Press to display the “MULTI DISPLAY Setup” menu.

Press to select the MULTI DISPLAY Setup.

Press to select “On” or “Off”.

Item Details

MULTI DISPLAY Setup Select “On” or “Off”.

Horizontal Scale Select “1”, “2”, “3”, “4”, “5”.

Vertical Scale Select “1”, “2”, “3”, “4”, “5”.

Areas of the image that are hidden by the joint sections are adjusted both horizontally and vertically (0~100).

To show joints between displays. To hide joints between displays.

MULTI DISPLAY Setup

Set up TIMER

PRESENT TIME Setup

Network Setup Menu Display Duration Menu Transparency

MULTI DISPLAY Setup

MULTI DISPLAY Setup Horizontal Scale Vertical Scale Bezel H Adjustment Bezel V Adjustment Location

2/2Setup

15 S

Off

1 10 10

Bezel H Adjustment Bezel V Adjustment

Suitable for still image display. Suitable for moving image display.

Setting value: 0 Setting value: 100

Page 38

Setup for MULTI DISPLAY

Item Details

Select the required arrangement number. (A1-E5 : Refer to the following)

Display Number locations for each arrangement.

(Examples)

( 2 × 1) ( 2 × 3 ) ( 4 × 4 )( 4 × 2 ) ( 5 × 5 )

Location

A1 A2 A3 A4 A5

B1 B2 B3 B4 B5

C1 C2 C3 C4 C5

D1 D2 D3 D4 D5

E1 E2 E3 E4 E5

Press to exit from Setup.

ID Remote Control Function

You can set the remote control ID when you want to use this remote control on one of several different displays.

Note:

To operate this function, please purchase ID remote controller sold separately. Object model : EUR7636090R

Switch to on the right side.

Press the

Press one of

Notes:

• The numbers in 2, 3 and 4 should be set up quickly.

• Adjustable ID number range is 0 - 99.

• If a number button is pressed more than two times, the  rst two numbers become the ID number for the remote control.

button on the remote control.

- , for the tens digit setting.

- , for the units digit setting.

ID remote control button operation

The operation is the same as normal remote control except for the button.

ID Cancellation

Press button on remote control. (This has the same effect as pressing the , , buttons at the same time.)

Notes:

• Set the Remote ID “On” to operate the ID remote control.

If Remote ID is set to “On”, you can use the remote control without identical ID number during option menu display. (see page 46)

• The ID remote control cannot be used when ID select is set to anything other than 0, and the remote control ID is not the same as the ID select number (see page 46).

Page 39

Setup for Input Signals

Component / RGB-in select

Select to match the signals from the source connected to the COMPONENT/RGB IN terminal.

, PR signals

Y, P

RGB signals

Note:

Make setting of the selected input terminal (COMPONENT/RGB IN).

“Component”

“RGB”

Press to display the Setup menu.

Press to select the “Component / RGB-in select”.

Press to select the desired input signal.

Component

Press to exit from adjust mode.

RGB

Setup

ECO Mode settings Wobbling Component/RGB-in select

No activity power off

OSD Language English(UK

YUV / RGB-in select

Signal

Screensaver

Input label

Off

RGB

Disable

1/2

)

Select to match the signals from the source connected to DVI-D IN terminal. YUV signals RGB signals

“YUV”

“RGB”

Press to display the Setup menu.

Press to select the “YUV / RGB-in select”.

Press to select the desired mode.

RGB

YUV

Press to exit from adjust mode.

Setup

Signal

Screensaver

Input label

ECO Mode settings Wobbling YUV/RGB-in select

No activity power off

OSD Language English(UK

Off

RGB

Disable

1/2

)

Page 40

Setup for Input Signals

Signal menu

Note:

“Signal” setup menu displays a different setting condition for each input signal.

Setup

1/2

Press to display the Setup menu.

Press to select the “Signal”.

Press to display the Signal menu.

Press to select the menu to adjust.

Press to adjust the menu.

Press to exit from adjust mode.

Signal

Screensaver

Input label

ECO Mode settings Wobbling Component/RGB-in select

No activity power off

OSD Language English(UK

Press ACTION ( ) button

For Video For RGB

Signal

3D Y/C Filter Colour system Cinema reality Noise reduction

Auto

Off Off

[ AV ]

Signal

Sync Cinema reality XGA Mode Noise reduction

H-Freq.

V-Freq.

Signal Format

For Component For Digital

Signal

Cinema reality XGA Mode Noise reduction

H-Freq.

V-Freq.

Signal Format

[

Component

kHz

63.98

60.02 1280×1024/60

1024

]

Signal

Off

768

Off

Cinema reality Noise reduction HDMI Range

H-Freq.

V-Freq. Hz

Dot Clock Freq.

Signal Format

Disable

1024

kHz

63.98

60.02 1280×1024/60

kHz

63.98

60.02 MHz

108.0

1280×1024/60

Off

RGB

Auto

[

Off

768

Off

[

Digital

Off Off

)

RGB

]

3D Y/C Filter

Select “Signal” from the “Setup” menu during Video input signal. (“Signal [AV]” menu is displayed.)

Press to select the “3D Y/C Filter”

Press to set On / Off.

3D Y/C Filter

Page 41

Setup for Input Signals

Colour system

Select Signal from the “Setup” menu during Video input signal. (“Signal [AV]” menu is displayed.)

Press to select the “Colour system”.

Press to select each functions.

Signal

3D Y/C Filter Colour system Cinema reality Noise reduction

Auto

Off Off

[

]

If the picture image becomes unstable:

With the system set on Auto, under conditions of low level or noisy input signals the image may in rare cases become unstable. Should this occur, set the system to match the format of the input signal.

Colour system: Set the colour system to match the input signal. When “Auto” is set, Colour system will be

automatically selected from NTSC/PAL/SECAM/NTSC 4.43/PAL M/PAL N. To display PAL60 signal, select “Auto”.

Auto SECAM NTSC PAL M PAL N

PAL

NTSC 4.43

Cinema reality

Cinema reality:

When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which are recorded at 24 frames per second. If the picture is not stable, turn the setting to off.

Note:

When On, this setting only affects the following signal input:

• NTSC / PAL signal input during Video input signal.

• 525i (480i), 625i (575i), 1125 (1080) / 60i signal input during Component input signal.

Press to select Cinema reality.

Cinema reality

Off

Press to set On / Off.

XGA Mode

This menu is displayed when the input signal is analog (Component/PC). This menu sets two types of XGA signals with 60Hz vertical frequency having different aspect ratios and sampling rates (1,024 × 768 @ 60Hz and 1,366 × 768 @ 60Hz). When a 1,280 x 768 @ 60Hz input signal is automatically detected, the image is processed as a 1,280 x 768 @ 60Hz XGA input signal irrespective of this setting.

Press to select “XGA Mode”.

XGA Mode

Press to select “1024×768”, “1366×768”.

Note:

After making this setting, be sure to make each adjustment (such as “Auto Setup”) on the “Pos. /Size” menu as necessary. (see page 24, 25)

1024 × 768

Page 42

Setup for Input Signals

Noise reduction

Press to select “Noise reduction”.

Noise reduction

Press to select “Off”, “Auto”, “Min”, “Mid”, “Max”. Auto: Noise reduction will be automatically selected from “Min”,

“Mid” or “Max”.

Note:

Noise reduction can be adjusted while a Video or Component signal is being applied.

Sync

This function operates only during input from PC IN terminal.

Press to select the “Sync”.

Press to adjust.

Con rm that the input is set to RGB input (this setting is valid only for RGB input signal).

Signal

Sync Cinema reality XGA Mode

Off

Auto

1024

Off

[

RGB

768

]

Auto:

The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync. However, the synchronized signal that is input  rst is selected.

on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.

Note:

Accepts only RGB signals from COMPONENT/RGB IN terminal with “Sync on G”

HDMI Range

Switches the dynamic range according to the input signal from HDMI terminal.

Press to select “HDMI Range”.

Press to select “Video(16-235)”, “Full(0-255)”, “Auto”.

Video(16-235): If the input signal is the video range, Example: HDMI terminal output for DVD player Full(0-255): If the input signal is full range, Example: HDMI terminal output for personal computer

Switches the dynamic range automatically between “Video(16-235)” and “Full(0-255)” according to the input signal.

Auto: Note:

This function can be set only for HDMI signal input.

Signal

Cinema reality Noise reduction HDMI Range

[

Off Off

Auto

Digital

]

Page 43

Input signal display

Displays the frequency and the type of the current input signal.

This display is valid only for Component / RGB / PC and Digital input signal. Display range:

Horizontal 30 - 110 kHz Vertical 48 - 120 Hz

Setup for Input Signals

H-Freq.

V-Freq.

Signal Format

kHz

63.98

60.02 1280×1024/60

The dot clock frequency is displayed during digital signal input.

Note:

The automatically detected signal format may be displayed differently than the actual input signal.

H-Freq.

V-Freq. H z

Dot Clock Freq.

Signal Format 1280×1024/60

63.98

60.02

108.0

kHz

MHz

Page 44

Network Setup

Make the various settings to use the network function.

MULTI DISPLAY Setup

Set up TIMER

PRESENT TIME Setup

Network Setup Menu Display Duration Menu Transparency

Network Setup

Save

DHCP

IP address

Subnet mask

Gateway

Port

LAN Speed

Network ID

Control I/F Select

MAC address

2/2Setup

15 S

Off

192.168. 0. 8

255.255.255. 0

192.168. 0. 1

1024 Auto

RS-232C

--:--:--:--:--:--

DHCP, IP address, Subnet mask, and Gateway settings

1 Set DHCP.

When “Off” is selected, IP address and other settings can be set

manually.

2 Select the item and press . 3 Enter an address.

IP address

192.168. 0. 8

Use to select a digit.

Use to change a number.

Press .

Pressing

will cancel the address change.

4 Select “Save” and press .

Port setting

1 Select “Port” and press . 2 Enter a port number.

Port

01024

Use to select a digit.

Use to change a number.

Press .

Pressing

will cancel the port number change.

Save

Save the current network Setup. Each value set for DHCP, IP address, Subnet mask, and Gateway will be saved. If “NG” is displayed, check the same IP address is not used within the same network.

DHCP (DHCP client function)

To obtain an IP address automatically using a DHCP server, set this to “On”. If DHCP server is not used, set this to “Off”.

IP address (IP address display and setting)

Enter an IP address if DHCP server is not used.

Port

Set the port number used for command control. The available setting range is 1024 – 65535. When the PJLink™ protocol is used, the port setting is not necessary.

LAN Speed

Set the connection speed of the LAN environment. Select the value from Auto, 10 Half, 10 Full, 100 Half or 100 Full.

Network ID

Set the ID to identify this unit. The available setting range is 0 – 99.

Subnet mask (Subnet mask display and setting)

Enter a subnet mask if DHCP server is not used.

Control I/F Select

Set whether to control with RS-232C (serial) or LAN.

Gateway (Gateway address display and setting)

Enter a gateway address if DHCP server is not used.

When “LAN” is set, power indicator lights orange under the condition of power “Off” with remote control (standby state).

MAC address

Display the MAC address of this unit. However, the MAC address is not displayed when the “Control I/F Select” is set to “RS-232C”.

Notes:

• To use a DHCP server, make sure the DHCP server is started.

• Contact your network administrator for details on settings.

Page 45

Options Adjustments

Press to display the Setup menu.

Press to select “OSD Language”.

Press for more than 3 seconds.

Press to select “Options”.

Press to display the Options menu.

Press to select your preferred menu.

Press to adjust the menu.

Press to exit from Options menu.

Options

Shipping

Options

Input Search On screen display Initial input Initial VOL level Maximum VOL level Input lock Button lock Remocon User level

Options

Off-timer function

Initial Power Mode ID select Remote ID Serial ID Serial Daisy Chain Studio W/B

Options

Slot power Power ON Screen Delay Clock Display Power On Message (No activity power off)

Function button assign 1 Function button assign 2

On Off

Off00

Off

Enable

Normal

Off

---

Off

Off Off

Signal

Screensaver

1/3

2/3

3/3

Item Adjustments

Input Search

On screen display

Initial input

Initial VOL level

Maximum VOL level

Input lock

Set auto input switching for when there is no signal. (see page 47) On: Displays all the following on screen.

• Power on display

• Input signal switch display

• No signal display

• Mute and the remaining time of off-timer after

was pressed.

Off: Hides all the items above from view. Adjusts the input signal when the unit is turned on.

Off SLOT INPUT* VIDEO Component/RGB PC DVI HDMI Off

* “SLOT INPUT” is displayed when an optional Terminal Board is installed.

When a Terminal Board with dual input terminals is installed, “SLOT INPUT A” and “SLOT INPUT B” are displayed.

Notes:

• Only the adjusted signal is displayed. (see page 18)

• This menu is available only when “Input lock” is “Off”.

Press

Off

button to adjust the volume when the unit is turned on.

On Off: Sets normal volume. On: Sets your preferred volume. Notes:

When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range.

•

• You can hear the changed volume regardless of your volume setting before opening the options menu

if you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.

Press

Off

button to adjust the maximum volume.

On Off: Sets auto maximum volume. On: Sets your preferred maximum volume. Notes:

• If the “Maximum VOL level” is set lower than the “Initial VOL level”, the “Initial VOL level” automatically

becomes the same as the “Maximum VOL level”.

• The volume display can go up to 100 regardless of the settings.

• You can hear the changed volume regardless of your volume setting before opening the options menu

if you adjust the volume when “Maximum VOL level” is “On” and cursor is on the menu.

Locks the input switch operation.

Off SLOT INPUT* VIDEO Component/RGB PC DVI HDMI Off

* “SLOT INPUT” is displayed when an optional Terminal Board is installed.

When a Terminal Board with dual input terminals is installed, “SLOT INPUT A” and “SLOT INPUT B” are displayed.

Notes:

• Only the adjusted signal is displayed (see page 18).

• Input switch can be used when this is set to “Off”.

Page 46

Options Adjustments

Item Adjustments

Off Off: All the buttons on main unit can be used. MENU&ENTER: Locks

Button lock

Remocon User level

Off-timer function

Initial Power Mode

ID select

Remote ID

Serial ID

Serial Daisy Chain

Studio W/B

Slot power

Power ON Screen

Delay

Clock Display

On: Locks all the button on main unit except the Power switch.

Sets Button lock with the unit buttons in the following procedure.

Off: Press MENU&ENTER: On: Press

Off Off: You can use all of the buttons on the remote control. User1: You can only use

User2: You can only use User3:

Locks all the buttons on remote control.

Enable: Enables the “Off-timer function”. Disable: Disables the “Off-timer function”. Note: When “Disable” is set, the Off-timer is cancelled.

Normal

Sets the power mode of the unit for when the power recovers from failure or after plugging off and in again.

Normal: Power returns in as the same state as before the power interruption. Standby

: Power returns in standby mode. (Power Indicator : red/orange) On: Power returns in power On. (Power Indicator : green) Note: When using multiple displays, “Standby” is preferred to be set in order to reduce a power load.

Sets panel ID number when panel is used in “Remote ID” or “Serial ID”. Set value range: 0 - 100 (Standard value: 0)

The setting of this menu is valid only when using ID remote control.

Off

: Disables ID remote control functions. You can use normal remote control operations. On: Enable ID remote control functions. Note: To use the ID remote control function, it is necessary to set each ID number of remote control and

display unit. About the setting method, please refer to “ID Remote Control Function” (see page

38) and “ID select” (above-mentioned).

Sets the panel ID Control.

Off

: Disables external control by the ID. On: Enables the external control by the ID.

Sets the top and end of a daisy chain when the SERIAL terminal of Display is daisy chained.

---: When the Display is under SERIAL control on a standalone basis, or if not at the top or end of daisy

chain.

Top: To connect to the top of daisy chain. End:

To connect to the end of daisy chain.

Off

: Nullify all the settings adjusted. On: Sets the colour temperature for TV studio. Note: Valid only when the “Warm” is set as “White balance” in Picture menu.

Off Off

: Power is not transmitted to the slot power. Auto: Power is transmitted to the slot power only when main power is on. On: Power is transmitted to the slot power when main power is on or in the standby state. Note: In some cases, power is transmitted to the slot power when main power is on or in the standby

state regardless of the slot power setting.

Off

1 2 3.... 30

You can set the power-on delay time of the displays to reduce the power load, when you press turn on the multiple displays that are set together, for example, on MULTI DISPLAY system. Set each display’s setting individually.

Off: The display will be turned on at the same time as 1 to 30 (sec.)

Notes:

• During this function is working, the power indicator is blinking green.

• This function also works when the power recovers from failure or after plugging off and in again the

power cord.

Off: Not display the clock. On: Display the clock.

The clock is displayed at the lower left of the screen when

Note: When “PRESENT TIME Setup” is not set, the clock is not displayed even

10:00

On MENU&ENTER

and buttons on main unit.

four timesPress

Press four timesPress

four timesPress four timesPress

INPUT

four timesPress

INPUT

four timesPress

User1 User2 User3

, , , , buttons on the remote control.

button on the remote control.

On Standby

Auto On

is pressed.

: Set the power-on delay time (second).

After pressing , the display will be powered on with time delay depending on this setting.

button is pressed.

if “Clock Display” is “On”. (see page 29)

Page 47

Item Adjustments

Power On Message

(No activity power

off)

Function button assign 1 Function button assign 2

Options Adjustments

Whether to show/hide No activity power off Precautions at the time of power ON is set.

On: The warning precautions are shown at the time of power ON. Off: The warning precautions are not shown at the time of power ON. Note: This setting is enabled only if “No activity power off” is “Enable” (see page 33).

Set the functions that operates when is pressed.

Signal: The “Signal” menu is displayed. Screensaver: The “Screensaver” menu is displayed. ECO menu: The “ECO Mode settings” menu is displayed. Set up TIMER: The “Set up TIMER” menu is displayed. Note:

Factory settings are as follows. FUNCTION1 button: Signal FUNCTION2 button: Screensaver

Use the FUNCTION button

The menu screen is displayed. (Example: Signal)

Signal

[ AV ]

3D Y/C Filter Colour system Cinema reality Noise reduction

Auto

Off Off

Press the FUNCTION button to exit from the menu.

Normalisation

When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote ID” adjustments, set all the values “Off” so that all the buttons are enabled again.

Press the

button on main unit together with button on the remote control and hold for more than 5 seconds.

The “Shipping” menu is displayed and the lock is released when it disappears.

Input Search

When a signal is not detected, another input with a signal is automatically selected.

select

Options

Input Search On screen display Initial input

Input Search

Off: When there is no signal, the input is not switched automatically. All Inputs: Searches all inputs and switches to an input with a signal. Priority: Searches “Primary Input” and “Secondary Input” in order and switches to an input with a signal.

On Off

1/3

Press ACTION ( ) button

Input Search

Primary Input Secondary Input

Off

adjust

Searching...

“Searching...” is displayed during the input search.

Primary Input, Secondary Input

Set the input to search when “Priority” is selected.

(NONE)

SLOT INPUT* VIDEO Component/RGB PC DVI HDMI

* “SLOT INPUT” is displayed when an optional Terminal Board is installed.

When a Terminal Board with dual input terminals is installed, “SLOT INPUT A” and “SLOT INPUT B” are displayed.

Note:

• This menu is available only when “Input lock” is “Off”. (see page 45)

Page 48

Using Network Function

This unit has a network function to control the network connected display with your computer.

Note:

To use the network function, set each “Network Setup” setting and make sure to set the “Control I/F Select” to “LAN”. (see page 44) When “LAN” is set, power indicator lights orange under the condition of power “Off” with remote control (stand-by state).

Example of Network Connection

COMPUTER

LAN cable (not supplied)

Hub or broadband router

Notes:

• Make sure the broadband router or hub supports 10BASE-T/100BASE-TX.

• To connect a device using 100BASE-TX, use “category 5” LAN cable.

• Touching the LAN terminal with a statically charged hand (body) may cause damage due to its discharge. Do not touch the LAN terminal or a metal part of the LAN cable.

• For instructions on how to connect, consult your network administrator.

Display (main unit, rear)

Command Control

Network function of the unit can control the unit in the same way as serial control from a network.

Supported commands

Commands used in the serial control are supported. (see page 15)

Note:

Consult your local Panasonic dealer for detail instructions on command usage.

Page 49

Using Network Function

PJLink™ Protocol

The network function of the unit conforms with PJLink™ class 1 and you can operate the following actions from your computer using PJLink™ protocol.

• Display setup

• Display status query

Supported commands

Commands to control the unit with PJLink™ protocol are shown in the table below.

Command Control Remark

POWR Power control

POWR ? Power status query

INPT Input switch INPT ? Input switch query AVMT Shutter control Parameter

AVMT ? Shutter control query Parameter

ERST ? Error status query Parameter

LAMP ? Lamp status query Not supported INST ? Input switch list query

NAME ? Projector name query Returns empty character (no name information) INF1 ? Manufacturer name query Returns “Panasonic” INF2 ? Model name query Returns “TH-70/80LF50” INFO ? Other information query Returns version number CLSS ? Class information query Returns “1”

Parameter 0 = Standby 1 = Power “On”

Parameter See the parameter for command INST ?

10 = Picture On (picture mute deactivated), 11 = Picture Off (picture on mute) 20 = Audio On (audio mute deactivated), 21 = Audio Off (audio on mute) 30 = Shutter mode Off (picture and audio mute deactivated) 31 = Shutter mode On (picture and audio on mute)

11 = Picture Off (picture on mute) 21 = Audio Off (audio on mute) 30 = Shutter mode Off (picture and audio mute deactivated) 31 = Shutter mode On (picture and audio on mute)

First byte: Means fan error. 0 or 2. Second byte: 0 Third byte: 0 Fourth byte: 0 Fifth byte: 0 Sixth byte: Means other error. 0 or 2. Meaning of the 0 – 2 settings: 0 = Error is not detected, 2 = Error

Parameter Numbers 11 to 13 are depending on the slot installation condition 11: PC IN input (PC)

When a single input terminal board is attached 11: SLOT input (SLOT INPUT) 12: PC IN input (PC)

21: VIDEO input (VIDEO) 31: HDMI input (HDMI)

When a dual input terminal board is attached 11: SLOT input (SLOT INPUT A) 12: SLOT input (SLOT INPUT B) 13: PC IN input (PC)

22: COMPONENT/RGB IN input

(COMPONENT)

32: DVI-D IN input (DVI)

PJLink™ security authentication

Set “Panasonic” for the PJLink™ password.

• PJLink™ is a pending trademark in Japan, the United States, and other countries or areas.

Page 50

Using Web Browser Control

You can use a Web browser to control the unit and set up a network and password.

Before Using Web Browser Control

To use the Web browser control, the unit and computer setups are required.

Unit Setup

Set each “Network Setup” setting and make sure to set the “Control I/F Select” to “LAN”. (see page 44)

Computer Setup

Disable the proxy server settings and enable JavaScript.

(Windows) (Macintosh)

Disable proxy server settings 1 Display [Internet Properties] window.

Click [Start] – [Control Panel] – [Network and Internet Connections] – [Internet Options].

2 Click the [Connections] tab and then [LAN Settings]. 3 Deselect the [Use automatic con guration script] and

[Use a proxy server for your LAN] boxes.

4 Click [OK].

Enable JavaScript 1 Display [Internet Properties] window.

Click [Start] – [Control Panel] – [Network and Internet Connections] – [Internet Options].

2 Set the security level on the [Security] tab to [Default

Level]. Alternatively enable [Active scripting] from the [Custom Level] button.

Disable proxy server settings 1 From the [Safari] menu, click [Preferences].

General screen is displayed.

2 From the [Advanced] tab, click the [Change

Settings…] button next to [Proxies]. Click [Proxies] and set up a proxy server.

3 Deselect the [Web Proxy] and [Automatic Proxy

Con guration] boxes.

4 Click [Apply Now].

Enable JavaScript 1 Display [Security] of Safari. 2 Select [Enable JavaScript] under [Web content].

Access from Web Browser

Access to the TOP screen of the Web browser control using a Web browser.

1 Start your Web browser. 2 Enter the IP address set with the “Network Setup” of the

unit. (see page 44)

3 Enter the user name and password when the

Authentication screen is displayed.

Authentication screen

4 Click [OK].

After logged in, the TOP screen of the Web browser control is displayed. (see page 51)

Notes:



The password used here is the same password

used for command control and the PJLink™ security authentication.



Default user name and password are as follows:

User name: user1 Password: Panasonic



The password can be changed on the Password

Setup screen after logging in (see page 52). The user name cannot be changed.



Under no circumstances, Panasonic Corporation

or it's associated companies will ask customers their password directly. Even if you are asked directly, please do not reveal your password.

Page 51

Using Web Browser Control

TOP screen structure of the Web browser control

After logging in, the TOP screen of the Web browser control is displayed.

Menu items are displayed. When a button is clicked, setup screen of each item is displayed.

Item Details

BASIC CONTROL

OPTION CONTROL

NETWORK SETTING CHANGE PASSWORD

According to the selected item from the menu, setup

status or set items are displayed.

Network ID information

ID to identify the unit is displayed.

BASIC CONTROL screen is displayed. (see below)

OPTION CONTROL screen is displayed. (see below)

Network Setup screen is displayed. (see page 52) Password setup screen is displayed. (see page 52)

Display Control (BASIC CONTROL/OPTION CONTROL Screen)

Click BASIC CONTROL or OPTION CONTROL from the menu. Various controls of the unit can be set.

BASIC CONTROL screen OPTION CONTROL screen

Click BASIC CONTROL from the menu. Unit status and buttons to change settings are displayed.

Item Details

POWER Switch ON/OFF of the unit power.

Switch the input signals. Displayed

INPUT SELECT

AUDIO MUTE Switch ON/OFF of the sound mute. ASPECT Switch the screen modes

buttons vary according to the connection status of the video device.

Click OPTION CONTROL from the menu. Command input  eld for command control of the unit is displayed.

Item Details

Enter a command. Use the same

COMMAND

RESPONSE Response from the unit is displayed. SEND Command is sent and run.

Note: After the settings are changed, it may take a while till

the display’s response is displayed.

command used for the serial control. (see page 15)

Page 52

Using Web Browser Control

NETWORK SETTING (Network Setup Screen)

Click NETWORK SETTING from the menu. Various settings of a network can be set. For the details of the setting items, please check Network Setup under the Set up of the unit. (see page 44)

Item Details

Set to ON when a DHCP server is used, or OFF when it is not used.

Enter the port number used for command control. The available setting range is 1024 - 65535.

Set the connection speed of the LAN environment.

Set the ID to identify this unit. The available setting range is 0 - 99.

Notes:

• To use a DHCP server, make sure the DHCP server is started.

• During a DHCP server is used, IP ADDRESS, SUBNET MASK, and GATEWAY values cannot be entered.

• When the set values are changed properly, “NETWORK SETTING CHANGED.” message and the changed set items are displayed.

DHCP

IP ADDRESS Enter an IP address. SUBNET MASK Enter a subnet mask. GATEWAY Enter a gateway address.

PORT

LAN SPEED

NETWORK ID

SAVE Save the each set value.

Password Setting (Password Setup Screen)

Click CHANGE PASSWORD from the menu. Password to access the Web browser control can be set. When the password is changed in this screen, the password used for command control and the PJLink™ security authentication is also changed.

Item Details

Notes:

• The default password is “Panasonic”.

• Up to 32 alphanumeric characters can be used for a password.

• When the password is changed properly, “Password has changed.” message is displayed.

OLD PASSWORD NEW PASSWORD

NEW PASSWORD

(RETYPE)

SAVE

Enter the old password.

Enter the new password.

Enter the password entered in “NEW PASSWORD” for con rmation.

Save the new password. The con rmation screen is displayed. Click OK to change the password.

Page 53

Troubleshooting

Before you call for service, determine the symptoms and make a few simple checks as shown below.

Symptoms

Picture Sound

Interference Noisy Sound

Normal Picture No Sound

No Picture No Sound

No Picture Normal Sound

No Colour Normal Sound

No remote control operations can be performed. Check whether the batteries have discharged completely and, if they have not,

A cracking sound is sometimes heard from the unit.

The top or bottom of the picture on the screen is cut off when I use the zoom function. Areas at the top and bottom of the screen where the image is missing appear when I use the zoom function. I can hear sounds coming from inside the unit. When the power is turned on, a sound of the display panel being driven may be

Parts of the unit become hot.

Power automatically turns off unexpectedly. Check the settings of “No signal power off”, “PC Power management”, “DVI-D

There is no picture displayed or sound output sometimes.

This LCD Display uses special image processing. Hence a slight time lag may occur between image and audio, depending on the type of input signal. However, this is not a malfunction.

Electrical Appliances Cars / Motorcycles Fluorescent light Volume (Check whether the mute function has been activated on the remote control.)

Not plugged into AC outlet Not switched on Picture and Brightness/Volume setting (Check by pressing the power switch or stand-by button on the remote control.) If a signal with a non-applicable colour system format, or frequency is input, only the input terminal indication is displayed.

Colour controls set at minimum level (see page 26, 27) Colour system (see page 41)

whether they were inserted properly. Check whether the remote control sensor is exposed to an outdoor light or a strong  uorescent light. Check whether the remote control designed speci cally for use with the unit is being used. (The unit cannot be operated by any other remote control.) If there is nothing wrong with the picture or sound, this is the sound of the cabinet undergoing very slight contractions in response to changes in the room temperature. There are no adverse effects on the performance or other aspects. Adjust the position of the picture on the screen.

When using a video software program (such as a cinema size program) with a screen wider than one in the 16:9 mode, blank areas separate from the images are formed at the top and bottom of the screen.

heard: This is normal and not indicative of malfunctioning. Even when the temperature of parts of the front, top and rear panels has risen, these

temperature rises will not pose any problems in terms of performance or quality.

Power management” and “No activity power off”. Any of them may be set to “On (Enable)”. (see page 33, 34)

When HDMI or DVI signals are input to the Display using a selector or distributor, sound or images may not be output in the normal fashion depending on the selector or distributor used. The symptoms may be improved by turning the power off and on again, or by replacing the selector or distributor.

Checks

LCD Display panel

Symptoms Check

The screen darkens slightly when bright pictures with minimal movements are shown.

It takes a while for the picture to appear.

The edges of the images  icker.

There may be red spots, blue spots, green spots and black spots on the screen.

Image retention appears

The screen will darken slightly when photos, still images of a computer or other pictures with minimal movements are shown for an extended period. This is done to reduce image retention on the screen and the shortening of the screen’s service life: It is normal and not indicative of malfunctioning.

The unit digitally processes the various signals in order to reproduce esthetically pleasing images. As such, it sometimes takes a few moments for the picture to appear when the power has been turned on, when the input has been switched.

Due to the characteristics of the system used to drive the panel, the edges may appear to  icker in the fast-moving parts of the images: This is normal and not indicative of malfunctioning.

This is a characteristic of liquid crystal panels and is not a problem. The liquid crystal panel is built with very high precision technology giving you  ne picture details. Occasionally, a few non-active pixels may appear on the screen as  xed points of red, blue, green, or black. Please note this does not affect the performance of your LCD.

Image retention may occur. If you display a still picture for an extended period, the image might remain on the screen. However, it will disappear after a while. This is not considered as malfunction.

Page 54

Applicable Input Signals

PC signals

Signal name

1 640x400@70Hz 31.46 70.07 2 640x480@60Hz 31.47 59.94 3 640x480@72Hz 37.86 72.81 4 640x480@75Hz 37.50 75.00 5 640x480@85Hz 43.27 85.01 6 800x600@56Hz 35.16 56.25 7 800x600@60Hz 37.88 60.32 8 800x600@72Hz 48.08 72.19

9 800x600@75Hz 46.88 75.00 10 800x600@85Hz 53.67 85.06 11 852x480@60Hz 31.47 59.94 12 1024x768@50Hz 39.55 50.00 13 1024x768@60Hz 48.36 60.00 14 1024x768@70Hz 56.48 70.07 15 1024x768@75Hz 60.02 75.03 16 1024x768@85Hz 68.68 85.00 17 1066x600@60Hz 37.64 59.94 18 1152x864@60Hz 53.70 60.00 19 1152x864@75Hz 67.50 75.00 20 1280x768@60Hz 47.70 60.00 21 1280x960@60Hz 60.00 60.00 22 1280x960@85Hz 85.94 85.00 23 1280x1024@60Hz 63.98 60.02 24 1280x1024@75Hz 79.98 75.02 25 1280x1024@85Hz 91.15 85.02 26 1366x768@50Hz 39.55 50.00 27 1366x768@60Hz 48.36 60.00 28 1400x1050@60Hz 65.22 60.00 29 1600x1200@60Hz 75.00 60.00 30 1920x1080@60Hz 67.50 60.00 31 1920x1200@60Hz 74.04 59.95 * (154.0) 32 Macintosh13"(640x480) 35.00 66.67 33 Macintosh16"(832x624) 49.72 74.55 34 Macintosh21"(1152x870) 68.68 75.06

Horizontal

frequency (kHz)

Vertical

frequency (Hz)

RGB IN

(Dot clock(MHz))

(25.17)

(25.18)

(31.5)

(36.0)

(40.0)

(50.0)

(49.5)

(56.25)

(65.0)

(75.0)

(78.75)

(94.5)

(108.0)

(80.14)

(108.0)

(148.5)

(108.0)

(135.0)

(86.71)

(162.0)

(148.5)

(30.24)

(57.28)

(100.0)

(Dot clock (MHz))

* * * * * * * * * *

* * * *

* * * * * * *

* *

* * *

*Mark: Applicable input signal

PC IN

(25.17) (25.18) (31.5) (31.5) (36.0) (36.0) (40.0) (50.0) (49.5) (56.25)

(65.0) (75.0) (78.75) (94.5)

(108.0) (80.14) (108.0) (148.5) (108.0) (135.0) (157.5)

(86.71)

(162.0) (148.5)

(30.24) (57.28) (100.0)

1

DVI-D IN

(Dot clock (MHz))

(25.18)

(40.0)

(33.24)

(51.89) *

(65.0)

(53.0)

(81.62)

(108.0)

(69.92)

(87.44)

(122.61)

(162.0)

(148.5)

1 Not compatible with Sync on G.

• The signal format automatically detected may differ from the actual input signal in display.

HDMI

* *

* * * * * *

Page 55

Applicable Input Signals

Component signals

Signal name

1 525(480)/60i 15.73 59.94 * (13.5) * (27.0) * 2 525(480)/60p 31.47 59.94 * (27.0) * (27.0) * 3 625(575)/50i 15.63 50.00 * (13.5) 4 625(576)/50i 15.63 50.00 * (27.0) 5 625(575)/50p 31.25 50.00 * (27.0) * 6 625(576)/50p 31.25 50.00 * (27.0) * 7 750(720)/60p 45.00 60.00 * (74.25) * (74.25) * 8 750(720)/50p 37.50 50.00 * (74.25) * (74.25) *

9 1,125(1,080)/60p 67.50 60.00 * (148.5) 10 1,125(1,080)/60i 33.75 60.00 * (74.25) 11 1,125(1,080)/50p 56.25 50.00 * (148.5) 12 1,125(1,080)/50i 28.13 50.00 * (74.25) 13

1,125(1,080)/24sF 14 1,125(1,080)/30p 33.75 30.00 * (74.25) 15 1,125(1,080)/25p 28.13 25.00 * (74.25) 16 1,125(1,080)/24p 27.00 24.00 * (74.25)

1:

Based on SMPTE 274M standard.

Horizontal

frequency (kHz)

27.00 48.00 * (74.25)2

Vertical

frequency (Hz)

2:

Based on SMPTE RP211 standard.

COMPONENT IN (Dot clock (MHz))

Mark: Applicable input signal

DVI-D IN

(Dot clock (MHz))

1 * (148.5) * 1 * (74.25) * 1 * (148.5) * 1 * (74.25)

1 * (74.25) * 1 * (74.25) * 1 * (74.25) *

Video signals (VIDEO)

Signal name

1 NTSC 15.73 59.94 2 PAL 15.63 50.00 3 PAL60 15.73 59.94 4 SECAM 15.63 50.00 5 NTSC 4.43 15.73 59.94 6 PAL N 15.63 50.00 7 PAL M 15.73 59.94

Horizontal Vertical

frequency(kHz) frequency(Hz)

HDMI

Page 56

Shipping condition

This function allows you to reset the unit to the factory setting.

Press to display the Setup menu.

Press to select “OSD Language”.

Press for more than 3 seconds.

Press to select “Shipping”.

Press to display the Shipping menu.

Press to select “YES”.

Setup

Signal

Screensaver

Input label

ECO Mode settings Wobbling Component/RGB-in select

No activity power off

OSD Language English(UK

Options

Shipping

YES NO

Off

RGB

Disable

1/2

)

Press to con rm.

Wait for 10 seconds.

Press the power switch ( ) on main unit to turn the power off.

[from the unit]

1 Press the MENU button till the Setup menu is displayed. 2 Press the Volume Up“+” or Down“–” button to select “OSD Language”. 3 Press and hold the ENTER button till the Shipping menu is displayed. 4 Press the Volume Up“+” or Down“–” button to select “YES”. 5 Press the ENTER button and wait for 10 sec. 6 Press the power switch (

) on main unit to turn the power off.

Page 57

Speci cations

TH-70LF50E TH-80LF50E

Power Source 220 - 240 V AC, 50/60Hz Power Consumption

Power on 260 W 380 W

Stand-by condition 0.5 W 0.5 W

Power off condition 0.3 W 0.3 W

LCD Display panel 70-inch VA panel (LED backlight),

16:9 aspect ratio

Screen size 1,538 mm (W) × 865 mm (H) × 1,765 mm

(diagonal)

(No.of pixels) 2,073,600 (1,920 (W) × 1,080 (H))

[5,760 × 1,080 dots]

Operating condition

Temperature 0 °C - 40 °C

Humidity 20 % - 80 %

Applicable signals

Colour System NTSC, PAL, PAL60, SECAM, NTSC 4.43, PAL M, PAL N

Scanning format 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60p · 50p, 1125 (1080) / 60i · 60p · 50i ·

50p · 24p · 25p · 30p · 24sF

PC signals VGA, SVGA, XGA, SXGA

UXGA ···· (compressed)

Horizontal scanning frequency 30 - 110 kHz

Vertical scanning frequency 48 - 120 Hz

Connection terminals

LAN RJ45 10BASE-T/100BASE-TX, compatible with PJLink™

VIDEO

AUDIO L-R

HDMI TYPE A Connector

COMPONENT/RGB IN

G/Y

B/P

B/CB

R/PR/CR

AUDIO L-R

DVI-D IN

DVI-D OUT

AUDIO

PC IN

AUDIO

SERIAL IN

SERIAL OUT

AUDIO

OUT

Dimensions (W × H × D) 1,604 mm × 931 mm × 89 mm 1,848 mm × 1,073 mm × 89 mm Mass (weight) approx. 47.0 kg approx. 60.0 kg

L-R RCA PIN JACK × 2 (L / R)

BNC RCA Pin jack × 2

BNC BNC BNC RCA Pin jack × 2

DVI-D 24 Pin × 2 Content Protection Stereo mini jack (M3) × 1

High-Density Mini D-sub 15 Pin

Stereo mini jack (M3) × 1 External Control Terminal

D-sub 9 Pin × 2 RS-232C compatible

Output level: Variable (-  0 dB)

80-inch VA panel (LED backlight),

16:9 aspect ratio

1,771 mm (W) × 996 mm (H) × 2,032 mm

(diagonal)

2,073,600 (1,920 (W) × 1,080 (H))

[5,760 × 1,080 dots]

1.0 Vp-p (75 )

0.5 Vrms

with sync 1.0 Vp-p (75 )

0.7 Vp-p (75 )

0.5 Vrms Compliance with DVI Revision 1.0

Compatible with HDCP 1.1

0.5 Vrms, Shared with PC IN G with sync 1.0 Vp-p (75 )

G without sync 0.7 Vp-p (75 ) B: 0.7 Vp-p (75 ) R: 0.7 Vp-p (75 ) HD/VD: 1.0 - 5.0 Vp-p (high impedance)

0.5 Vrms, Shared with DVI-D IN

[INPUT 1 kHz / 0 dB, 10 k Load]

Notes:

• Design and speci cations are subject to change without notice. Mass and dimensions shown are approximate.

• This equipment complies with the EMC standards listed below. EN55022, EN55024, EN61000-3-2, EN61000-3-3.

Page 58

Information for Users on Collection and Disposal of Old Equipment and used Batteries

These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC. By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

[Information on Disposal in other Countries outside the European Union]

These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.

Note for the battery symbol (bottom two symbol examples):

This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved.

This product has software installed partially licensed under the Free BSD LICENSE. Free BSD LICENSE regulations under the above specifications are as follows: (These regulations are set by the third party; therefore the original (English) regulations are stated.)

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgement:

This product includes software developed by the University of California, Berkeley and its contributors.

4. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Customer’s Record

The model number and serial number of this product can be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identi cation in the event of theft or loss, and for Warranty Service purposes.

Model Number Serial Number

Pursuant to the directive 2004/108/EC, article 9(2)

Web Site : http://panasonic.net

Panasonic Corporation 2012

Panasonic Testing Centre Panasonic Service Europe, a division of Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, F.R. Germany

M1012-0

Panasonic TH-80LF50E, TH-70LF50E User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual