Panasonic TH-65PZ750U User Manual

High Definition Plasma Television

Televisor de plasma de alta definición

Número de modelo

Quick Start Guide

(See page 6)

Guía de inicio rápido

(vea la página 6)

Operating Instructions

Manual de instrucciones

Model No.

TH-65PZ750U

For assistance (U.S.A.), please call:

1-888-VIEW-PTV (843-9788)

or visit us at www.panasonic.com/contactinfo
For assistance (Puerto Rico), please call:

787-750-4300

or visit us at www.panasonic.com
For assistance (Canada), please call:

1-800-561-5505

or visit us at www.panasonic.ca

Para solicitar ayuda (EE.UU.), llame al:

1-888-VIEW-PTV (843-9788)

ó visítenos en www.panasonic.com/contactinfo

Para solicitar ayuda (Puerto Rico), llame al:

787-750-4300

ó visítenos en www.panasonic.com

English

Español

Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.

Lea estas instrucciones antes de utilizar su televisor y guárdelas para consultarlas en el futuro.
Las imágenes mostradas en este manual tienen solamente fines ilustrativos.

HD3D Sound

ViV

A

TQB2AA0771

Turn your own living room into a movie theater!

Experience an amazing level of multimedia excitement

2

SDHC Logo is a trademark.

HDMI, the HDMI logo and High-Definition

Multimedia Interface are trademarks

or registered trademarks of HDMI

Licensing LLC.

GalleryPlayer and the GalleryPlayer

Logo are trademarks of

GalleryPlayer, Inc.

“AVCHD” and “AVCHD” logo are

trademarks of Matsushita Electric

Industrial Co., Ltd and Sony

Corporation.

A

HD3D Sound

Manufactured under license from BBE Sound, Inc.

Licensed by BBE Sound, Inc. under one or more of the

following US patents: 5510752, 5736897.

BBE and BBE symbol are registered trademarks of BBE

ViV

Sound, Inc.

Contents

Enjoy rich multimedia

Amplifier
Home theater
system

SD memory card

VCR DVD player

DVD recorder Set Top Box

Camcorder

Personal

computer

Please read before using the unit

Safety Precautions ······································· 4

•

Notes···························································· 5

•

Quick Start Guide

Accessories/Optional Accessory

•

Before Connection ························ 8

•

Basic Connection ·························· 9

•

Identifying Controls ···················· 15

•

First Time Setup ·························· 16

··· 6

•

Enjoy your TV!

Basic Features

Watching TV ···············································18

•

Viewing from SD Card ·······························22

•

Watching Videos and DVDs ·······················26

•

Displaying PC Screen on TV ·····················28

•

Advanced Features

Quick Start

Guide

Viewing Advanced FAQs, etc.

EZ Sync™

EZ Sync™ is a trademark of

Matsushita Electric Industrial Co., Ltd.

HDAVI Control™

HDAVI Control™ is a trademark of

Matsushita Electric Industrial Co., Ltd.

Manufactured under license from Dolby Laboratories.

DOLBY and the double-D symbol are

trademarks of Dolby Laboratories.

How to Use Menu Functions

•

(picture, sound quality, etc.) ······················· 30
EZ SyncTM “HDAVI ControlTM”····················· 34

•

Lock ··························································· 36

•

Editing and Setting Channels ···················· 38

•

Input Labels/Monitor Out/Closed Caption

•

Using Timer ················································ 42

•

Operating Peripheral Equipment ··············· 43

•

Recommended AV Connections ················ 44

•

FAQs, etc.

Remote Control Operation/Code List ········· 46

•

Ratings List for Lock ··································50

•

Maintenance ·············································· 51

•

Technical Information ·································52

•

FAQ ···························································· 56

•

Specifications ············································· 58

•

Limited Warranty (for U.S.A.) ····················· 59

•

Customer Services Directory (for U. S. A.)

•

Limited Warranty (for Canada) ···················61

•

······ 40

···· 60

3

Safety Precautions

The lightning flash with
arrowhead within a triangle

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Do not place liquid containers (flower vase, cups, cosmetics, etc.) above the set
(including on shelves above, etc.).

Important Safety Instructions

is intended to tell the user
that parts inside the product
are a risk of electric shock to
persons.

The exclamation point within
a triangle is intended to
tell the user that important
operating and servicing
instructions are in the papers
with the appliance.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.

9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.

11) Only use attachments / accessories specified by the
manufacturer.

12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the cart /
apparatus combination to avoid injury
from tip-over.

13) Unplug this apparatus during lightning
storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.

15) To prevent electric shock, ensure the grounding pin on the
AC cord power plug is securely connected.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.

FCC Caution:
To assure continued compliance, use only shielded interface cables when connecting to computer or peripheral devices.
Any changes or modifications not expressly approved by Panasonic Corporation of North America could cause harmful
interference and would void the user’s authority to operate this device.

FCC Declaration of Conformity

Model No. TH-65PZ750U

Responsible Party: Panasonic Corporation of North America

Contact Source: Panasonic Consumer Electronics Company

email: [e-mail]

One Panasonic Way, Secaucus, NJ 07094

1-888-VIEW-PTV (843-9788)

4

CANADIAN NOTICE:

For Model TH-65PZ750U
This Class B digital apparatus complies with Canadian ICES-003.

WARNING/CAUTION

If problems occur during use

WARNING

SMALL PARTS CAN PRESENT CHOKING HAZARD IF
ACCIDENTALLY SWALLOWED.
KEEP SMALL PARTS AWAY FROM YOUNG CHILDREN.
DISCARD UNNEEDED SMALL PARTS AND OTHER OBJECTS,
INCLUDING PACKAGING MATERIALS AND PLASTIC BAGS/SHEETS
TO PREVENT THEM FROM BEING PLAYED WITH BY YOUNG
CHILDREN, CREATING THE POTENTIAL RISK OF SUFFOCATION.

Set up

Ŷ

Do not place the Plasma TV on sloped or unstable surfaces.

The Plasma TV may fall off or tip over.

Do not place any objects on top of the Plasma TV.

If water spills onto the Plasma TV or foreign objects get
inside it, a short-circuit may occur which could result in fire
or electric shock. If any foreign objects get inside the Plasma
TV, please consult an Authorized Service Center.

This Plasma TV is for use only with the following optional
accessories. Use with any other type of optional accessories may
cause instability which could result in the possibility of injury.

(All of the following accessories are manufactured by
Matsushita Electric Industrial Co., Ltd.)

• Wall-hanging bracket (Vertical) TY-WK65PV7

• Pedestal TY-ST65R2-WG

Always be sure to ask a qualified technician to carry out set-up.

Two or more people are required to install and remove the
television. If two people are not present, the television may
be dropped, and personal injury may result.

Transport only in upright position!

Transporting the unit with its display panel facing upright or
downward may cause damage to the internal circuitry.

AC Power Supply Cord

Ŷ

The Plasma TV is designed to operate on 120 V AC, 60 Hz.
Securely insert the power cord plug as far as it will go.

If the plug is not fully inserted, heat may be generated which
could cause fire. If the plug is damaged or the wall socket
plate is loose, they should not be used.

The included power cord is for use with this unit only.
Do not use any power cord other than that provided with this TV.

Doing so may cause fire or electric shocks.

Do not handle the power cord plug with wet hands.

Doing so may cause electric shocks.

Do not do anything that might damage the power cable. When
disconnecting the power cable, hold the plug, not the cable.

Do not make any modifications to, place heavy objects on,
place near hot objects, heat, bend, twist or forcefully pull the
power cable. Doing so may cause damage to the power cable
which can cause fire or electric shock. If damage to the cable
is suspected, have it repaired at an Authorized Service Center.

Ŷ

If a problem occurs (such as no picture or no sound), or if
smoke or an abnormal odor is detected from the Plasma
TV, unplug the power cord immediately.

Continued use of the TV under these conditions might cause
fire or permanent damage to the unit. Have the TV evaluated
at an Authorized Service Center. Servicing of the TV by any
unauthorized personnel is strongly discouraged due to its
high voltage dangerous nature.

If water or foreign objects get inside the Plasma TV, if the
Plasma TV is dropped, or if the cabinet becomes damaged,
disconnect the power cord plug immediately.

A short may occur, which could cause fire. Contact an
Authorized Service Center for any repairs that need to be
made.

Do not cover the ventilation holes.

Doing so may cause the Plasma TV to overheat, which can
cause fire or damage to the Plasma TV.

If using the pedestal, leave a space of 3 15/16 ” (10 cm) or
more at the top, left and right, 1 49/64 ” (4.5 cm) or more at
the bottom, and 2 3/4 ” (7 cm) or more at the rear.

When using the Plasma TV

Ŷ

Be sure to disconnect all cables before moving the Plasma
TV.

Moving the TV with its cables attached might damage the
cables which, in turn, can cause fire or electric shock.

Disconnect the power plug from the wall outlet as a safety
precaution before carrying out any cleaning.

Electric shocks can result if this is not done.

Clean the power cable regularly to prevent it from
becoming dusty.

Built-up dust on the power cord plug can increase humidity
which might damage the insulation and cause fire. Unplug the
cord from the wall outlet and clean it with a dry cloth.

This Plasma TV radiates infrared rays; therefore, it may
affect other infrared communication equipment.
Install your infrared sensor in a place away from direct or
reflected light from your Plasma TV.
Do not climb up onto the television or use it as a step.
(Young children should be made particularly aware of this
caution.)

If the unit falls over or becomes damaged through misuse,
injury may result.

The TV will still consume some power as long as the power
cord is inserted into the wall outlet.

CAUTION

Notes

Do not display a still picture for a long time

Ŷ

This causes the image to remain on the plasma screen
(“Image retention”). This is not considered a malfunction and is
not covered by the warranty.

Typical still images

Channel number and other logos
Image displayed in 4:3 mode
SD Card photo Video game Computer image

4 : 3

Setup

Ŷ

Do not place the unit where it’s exposed to sunlight or other
bright light (including reflections).
Use of some types of fluorescent lighting may reduce the
remote control’s transmission range.

12

To prevent “Image retention”,
the screen saver is
automatically activated after
a few minutes if no signals
are sent or no operations are
performed. (p. 57)

5

Accessories/Optional Accessory

Check you have all the items shown.

Accessories

Remote Control
Transmitter

N2QAYB000099

•

Cable clamper (2)

Operating Instructions

Quick Setup Guide
(For viewing HD programming)

Batteries for the Remote
Control Transmitter

AA Battery

•

AC cord

Product Registration Card (U.S.A.)

Customer Care Plan Card (U.S.A.)

(2)

Antenna Adapter

F-Type for 5C-2V

•

Installing the remote’s batteries

Hook

Open

2

Note the correct polarity (+ or -).

1

Caution

Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.

•

Do not mix old and new batteries.

•

Do not mix different battery types (such as alkaline and manganese batteries).

•

Do not use rechargeable (Ni-Cd) batteries.

•

Do not burn or break batteries.

•

Make a note of the remote control codes before changing batteries in case the codes are reset. (p. 43)

•

Close

6

Cable Binding Instructions

Do not bundle the RF cable and AC cord together

•

(could cause distorted image).
Fix cables with Cable clamper as necessary.

•

When using the options, follow the option’s assembly

•

manual to fix cables.

Optional Accessory

Wall-hanging bracket

(vertical)

TY-WK65PV7

•

To fix

Push until it
clicks

To open To shut

Pedestal

TY-ST65R2-WG

•

To release

Press catch
in and pull
away

To remove from the
TV

Push both side hooks

Quick Start

Guide

Accessories/Optional Accessory

Note

In order to maintain the TV’s performance and safety, be absolutely sure to ask your dealer or a licensed

•

contractor to secure the wall-hanging brackets.
Carefully read the instructions accompanying the plasma TV stand or pedestal, and be absolutely sure to take

•

steps to prevent the TV from tipping over.
Handle the TV carefully during installation since subjecting it to impact or other forces may cause its paneling

•

to crack.

7

Reference of connection

Before Connection

Connected Equipment Introduction (Signal source)

Watching TV

Ŷ

VHF/UHF Antenna

•

NTSC (National Television System Committee):

•

Conventional broadcasting

ATSC (Advanced Television Systems Committee):

•

Digital TV Standards include digital high-definition television (HDTV),
standard-definition television (SDTV), data broadcasting, multi-channel
surround-sound audio and interactive television.

Cable Box/Cable

•

You need to subscribe to a cable TV service to enjoy viewing their

•

programming.
You can enjoy high-definition programming by subscribing to a high-definition cable box. The connection can be

•

done with the use of HDMI or Component Video cable.

Recording/playing back with DVD recorder or VCR

Ŷ

DVD Recorder

•

This source has higher resolution through interlace or progressive signal.
Connection can be done with the use of Component Video or HDMI cable.
VCR

•

Connection can be done with the use of an RF cable and Composite Video/S Video cable.

VHF/UHF Antenna Cable Box/

DVD Recorder

or

Cable

or

VCR

Watching Satellite

Ŷ

You can enjoy high-definition programming by subscribing to

•

high-definition satellite source. Connection can be done with the use of
HDMI or Component Video cable.

Satellite Antenna

Enjoying Home theater and DVD recorder with

Ŷ

HDMI connection

Home theater and DVD Recorder

•

HDMI connection enables you to enjoy higher quality audio and video with

a single cable.

Note

If your Panasonic DVD Recorder is compatible with EZ Sync (HDAVI control 2), you can operate your Panasonic

•

DVD Recorder with this TV’s remote control (p. 27 EZ SyncTM).

All cables and external equipment shown in this book are not supplied with the TV.

•

For the details of the external equipment’s connections, please refer to the operating manuals for the equipment.

•

Antenna terminal

Ŷ

Pin terminals

Ŷ

HDMI terminal

Ŷ

Satellite

Receiver

DVD RecorderHome Theater

8

Firmly tighten by hand.

•

greenbluered

green

Match colors of plugs and terminals.

•

Insert firmly.

•

Insert firmly.

•

To connect antenna terminals

Basic Connection

Example 1

TV

Back of the TV

Connecting Antenna (To watch TV)

VHF/UHF Antenna

Cable TV

AC 120 V

60 Hz

AC Cord
(Connect after all the
other connections.)

Cable TV

VHF/UHF Antenna

or

Quick Start

Guide

Basic Connection (Antenna + TV)

Before Connection

21 AV IN

If using Cable Box

•

Set the TV channel to CH3 or CH4.

•

Antenna

terminal

ANTENNA

Cable In

(If no Cable Box)

or

ANT OUT ANT IN

Cable Box

Note

When disconnecting the power cord, be absolutely sure to disconnect the power cord plug from the wall outlet first.

•

For additional assistance, visit us at: www.panasonic.com

•

www.panasonic.ca

9

To connect antenna terminals

Basic Connection (Continued)

Example 2

TV

Back of the TV

Y

B

P

P

R

L

AUDIOVIDEO

R

COMPONENT VIDEO

INPUT

12

Connecting DVD recorder (VCR) (To record/playback)

VHF/UHF Antenna

AV Equipment
(e.g. DVD Recorder or VCR)

AC 120 V

60 Hz

AC Cord

LR

HDMI 1

Y

P

P

L

R

B

R

L

R

INPUT

L

R

INPUT

2

1

AUDIO IN

S VIDEO

VIDEO

L

AUDIO

R
TO AUDIO AMP

PROG OUT

AUDIO

AUDIO

IN

IN

HDMI 2

AUDIO IN

DIGITAL

AUDIO

OUT

PC

VHF/UHF Antenna

Antenna

terminal

ANTENNA

Cable In

21 AV I N

10

To use PROG OUT terminals
(p. 44, 45)

To use S VIDEO terminals
(next page)

To use COMPOSITE terminals
(next page)

To use COMPONENT terminals
(next page)

To use HDMI
terminals
(next page)

ANT OUT ANT IN

AV Equipment

(e.g. DVD Recorder or VCR)

(with TV tuner)

High-Definition

Standard-Definition

AUDIOVIDEO

Y Y

L L

R R

P

B

P

B

P

R

P

R

COMPONENT VIDEO

INPUT

12

S VIDEO

PROG

L

R

L

R
TO AU

1

INPUT

2

INPUT

2

L

R

L

R

P

R

L

R

IDEO

2

INPUT

1

To use HDMI terminals

Ŷ

AV Equipment

21 AV IN

HDMI
AV OUT

e.g. DVD Recorder

Connecting to HDMI terminals will enable you to enjoy high-definition digital images and high-quality

•

sound.

To use COMPONENT terminals

Ŷ

Y

green

blue

red

white

red

green

blue

red

white

red

B

P

COMPONENT
VIDEO OUT

PR

L

AUDIO
OUT

R

AV Equipment

e.g. DVD Recorder

green

blue

red

white

red

Recorders may also be connected to COMPOSITE or S VIDEO terminals. (see below)

•

Quick Start

Guide

Basic Connection

(TV + DVD Recorder or VCR)

To use COMPOSITE terminals

Ŷ

To use S VIDEO terminals

Ŷ

The S Video input will override the composite

•

video signal when S Video cable is connected.
Connect either S Video or Video cable.

yellow

white

red

white

red

AV Equipment

yellow

white

red

yellow

white

red

L

COMPOSITE
OUT

R

S VIDEO
OUT

e.g. DVD Recorder

or

e.g. VCR

AV Equipment

e.g. DVD Recorder

L

white

Connecting to S VIDEO terminals will enable

•

you to enjoy greater picture quality than using

red

white

red

R

AUDIO
OUT

or

e.g. VCR

Composite terminals.

•

•

•

Note

Some programs contain a copyright protection signal to prevent recording.
When the copyright protection program is displayed, do not connect the other TV monitor through a VCR. Video signals fed
through VCRs may be affected by copyright protection systems and the picture will be distorted on the other TV monitor.
For the details of the external equipment’s connections, please refer to the operating manuals for the equipment.

11

To connect antenna terminals

Connecting TV and DVD recorder (VCR)

Basic Connection (Continued)

Example 3

TV

Back of the TV

Y

P

B

P

R

L

AUDIOVIDEO

R

COMPONENT VIDEO

INPUT

12

Connecting DVD recorder (VCR) and satellite receiver

Satellite

DVD Recorder

Receiver

or

VCR

AC 120 V

60 Hz

AC Cord

LR

HDMI 1

Y

P

B

P

R

L

R

L

R

INPUT

1

L

RLR

INPUT

2

AUDIO IN

S VIDEO

VIDEO

AUDIO

TO AUDIO AMP

PROG OUT

AUDIO

AUDIO

IN

IN

HDMI 2

AUDIO IN

DIGITAL

AUDIO

OUT

PC

VHF/UHF Antenna

VHF/UHF Antenna

Antenna

terminal

ANTENNA

Cable In

21 AV I N

12

To use S VIDEO terminals
(p. 11)

To use COMPOSITE terminals
(p. 11)

To use COMPONENT terminals
(p. 11)

Connect in the same way as on p. 11.

To use HDMI
terminals
(p. 11)

(with TV tuner)

ANT OUT ANT IN

Satellite ReceiverDVD Recorder or VCR

ANT IN

To Connect DVD Recorder/

VCR and satellite receiver

To use COMPOSITE terminals

Ŷ

DVD Recorder

or

VCR

To use S VIDEO terminals

Ŷ

DVD Recorder

or

VCR

The S Video input will override the composite video signal when S Video cable is connected. Connect

•

either S Video or Video cable.
Connecting to S VIDEO terminals will enable you to enjoy greater picture quality than using Composite

•

terminals.

COMPOSITE
IN

S VIDEO
IN

AUDIO
IN

yellow

L

white

R

red

L

white

R

red

yellow

white

red

white

red

yellow

white

red

white

red

yellow

white

red

white

red

L

COMPOSITE
OUT

R

S VIDEO
OUT

L

AUDIO
OUT

R

Satellite Receiver

Satellite Receiver

Quick Start

Guide

Basic Connection

(TV + DVD Recorder or VCR + Satellite Receiver)

Note

For the details of the external equipment’s connections, please refer to the operating manuals for the equipment.

•

13

To connect HDMI terminals

VIDEO

DIGITAL

AUDIO

OUT

AUDIO

AUDIO

21 AV I N

Basic Connection (Continued)

Example 4

TV

Back of the TV

Home theater

(DIGITAL AUDIO IN)
(When listening to TV audio) [ATSC only]

Connecting Home Theater and DVD recorder

Home Theater

or

Home theater

(HDMI AV OUT)

DVD Recorder

DIGITAL
AUDIO IN

HDMI
AV OUT

HDMI
AV IN

Home Theater
(AV amp)

Note

It is recommended that you use Panasonic’s HDMI cable. (P. 34)

•

When Using the COMPONENT VIDEO OUT terminals or the S VIDEO OUT

•

terminal, refer to p. 11 “To use COMPONENT terminals” or “To use S VIDEO
terminals”.
If you connect RAM theater or Player theater with HDMI cable, use audio cable

•

instead of the optical digital audio cable. (p. 45)

DVD Recorder

HDMI
AV OUT

14

-

SUB
MENU

-

Identifying Controls

Display the Main menu.

Choose menu and submenu entry.

Switches TV/VIDEO

SD CARD slot

POWER
button

Power indicator (on: red, off: no light)

The TV consumes a limited amount of power as long as the power cord is inserted into the wall outlet.

•

Switches TV to On or Standby

Viewing from SD Card (p. 22-25)

The equipment selection button (p. 26)

Changes the input mode (p. 26)

C.A.T.S. sensor

(Contrast Automatic Tracking System). (p. 30)

Note

Remote control sensor

Selects channels in sequence
(Move cursor up or down during menu mode.)

Volume up/down
(Move cursor right or left during menu mode.)

Swing up the door at “PULL”.

EZ Sync menu (p. 27, 34-35)

Selects Audio Mode for TV viewing
(p. 19)

Displays Main Menu (p. 30)

Exits menus

HDMI input 3 connector

Video Input 3 connector

3

AV IN

Quick Start

Guide

Identifying Controls

Basic Connection (TV + Home Theater + DVD Recorder)

Displays Sub Menu (p. 19, 32)

Colored buttons
(used for various functions)
(for example p. 22, 24, 38)

Channel up/down

Changes aspect ratio (p. 19)

Operates the Favorite channel list
function. (p. 20)

Switches to previously viewed channel
and input modes.

SPLIT

Split Screen (p. 20)

SWAP

Swap pictures in SPLIT operation (p. 20)

SUB
MENU

Selects/OK/Change

Returns to previous menu

Volume up/down

Displays or removes the channel
banner (p. 19)

Sound mute On/Off

Numeric keypad to select any
channel (p. 18) or press to enter
alphanumeric input in menus.
(p. 26, 27, 36, 38, 43)

Direct channel access for DTV and
DBS (p. 18)

External equipment operations
(VCRs, DVDs, etc.) (p. 26)

15

First Time Setup

“First time setup” is displayed only when the TV is turned on for the first time after the power cord is
inserted into a wall outlet and when “Auto power on” (p. 32-33) is set to “No”.

Turn the TV On with the POWER button

or

1

2

or

(TV) (Remote)

Select your language

First time setup

Language

Clock

Auto program

Picture

next

Press to exit from

Ŷ

menu screen

Press to return to

Ŷ

previous screen

Note

To change setting

•

(Language/Clock/Auto
program/Picture) later,
go to Menu screen
(p. 30, 32)

3

Language

Language

English Español Français

English

Go back to previous screen.

Adjust the clock

First time setup

Language

Clock

Auto program

Picture

Clock

Year

Month

Day

Hour

Minute

Year: Select the year
Month: Select the month
Day: Select the day
Hour: Adjust the hour
Minute: Adjust the minute

2007

1

7

10 AM

10

select

next

select

set

select item

16

Go back to previous screen.

4

Auto channel setup

Select “Auto program”

First time setup

Language

Clock

Auto program

Picture

next

select

Select “ANT in”

Program channel

ANT in

Auto

Cable

set

select

ANT in

Cable: Cable TV
Antenna: Antenna

Select “Auto”

Program channel

ANT in

Auto

Cable

next

select

Select scanning mode (ALL channels/Analog only/Digital only)

Auto program

All channels

Analog only

Digital only

ok

select

Quick Start

Guide

First Time Setup

Press to exit from

Ŷ

menu screen

Note

About broadcasting

•

systems

Analog (NTSC):

traditional TV
programming

Digital (ATSC):

new programming
that allows you to
view more channels
featuring high-quality
video and sound

Auto program

Scanning digital channel
progress

Quit 40%

All channels: Scans digital and analog channels
Analog only: Scans Analog channels only
Digital only: Scans Digital channels only

5

Confirm registered channels

rogram

Apply Cancel

aption Favorite Add

.

.

.

If OK is not pressed after selecting “Apply”, the channels will not be saved.

•

If you perform scanning more than twice, previously saved channels are erased.

•

First time setup

Language

Clock

Auto program

Picture

...

Yes

...

Yes

...

Yes

Start scanning the channels

Available channels (analog/digital)

•

are automatically set.

select

“Apply”

ok

(Refer to p. 30)

17

SUB
MENU

-

Watching TV

-

-

Connect the TV to a cable box/cable, set-top-box, satellite box, or antenna cable (p. 8-13)

Turn power on

1

SUB
MENU

2

Note

If the mode is not TV, press and select TV. (p. 26)

•

Select a channel number

up

or

down

To directly input the digital channel number

Ŷ

When tuning to a digital channel, press the button to enter the
minor number in a compound channel number.

example: CH15-1:

18

Note

Reselect “Cable” or “Antenna” in “ANT in” of “Program channel” to switch the

•

signal reception between cable TV and antenna. (p. 17, 39)
The channel number and volume level remain the same even after the TV is

•

turned off.

SUB
MENU

Other Useful Functions (Operate after )

Ŷ

Selects Audio Mode for watching TV

Ŷ

Listen
with SAP
(Secondary
Audio
Program)

Digital mode

•

Press SAP to select the next audio track (if available) when receiving a digital channel.

Audio track 1 of 2

Analog mode

•

Press SAP to select the desired audio mode.

• Each press of SAP will change the audio mode. (Stereo/SAP/Mono)

Press SUB MENU to show sub menu screen. (p. 32)

Ŷ

This menu consists of shortcuts to convenient functions.

(English)

Display the
SUB MENU

Information
Recall

Change
aspect
ratio

SUB
MENU

Displays or removes the channel banner.

Ŷ

Press ASPECT to cycle through the aspect modes. (p. 52)

Ŷ

Setup SUB MENU

Surf mode

Set favorite

CC

Caption select

Signal meter

Channel

15-2 12:30 pm
ABC-HD

Station
identifier

Closed caption

All

Off

THE NEWS

CC SAP

SAP
indication

• 480i, 480p: FULL/JUST/4:3/ZOOM

• 1080p, 1080i, 720p: FULL/H-FILL/JUST/4:3/ZOOM

TV-G 1 080i Standard 4:3

Signal
resolution

Rating Level

Picture
mode

Clock

Aspect ratio

30

Sleep timer
remaining time

Viewing

Watching TV

19

Watching TV (Continued)

Other Useful Functions (Operate after in p. 18)

Ŷ

Watch in multi window

(Audio is from Main picture only)

• The Split-screen feature is not available when using PC and SD Card viewing mode as a
source.

Left window (Main picture)

•

Screen enlargement and volume adjustment are available.

Right window (SPLIT frame)

•

The previously selected screen appears.
TV channel or Video input signal can be changed on SPLIT
frame.
HDMI input cannot be displayed in SPLIT frame.

Split ­Screen

Call up
a favorite
channel

2 Video1

2Video1

Ŷ

Channel numbers registered in Favorite are displayed on the favorite tune

P Out P:
Picture out of picture mode

P Out P

2Video1

2 Vide o1

FAVORITE

screen. Select the desired broadcast station with the cursor or use number
buttons. (see p. 21)

Normal:
Picture and picture mode

Video1Normal

2Video1

2 Video1

20

Favorite channels

1/3

1

2

3

4

Set favorite 1/3

1

2

3

---

---

---

---

4

Set favorite 1/3

1

2

3

4

SUB
MENU

Set Favorite Feature

Use Favorite Feature

1 Display the SUB MENU.

SUB
MENU

Setup SUB MENU

2

Surf mode

Set favorite

CC

Caption select

Signal meter

• Press FAVORITE repeatedly

3 Press Ÿźto highlight a position

• You can also use the NUMBER

26-1 - - -

All

Off

select

ok

Setup SUB MENU

Surf mode

Set favorite

CC

Caption select

Signal meter

to change between pages (1/3,
2/3, 3/3, or exit).

on the list.
Then, press OK to save the
displayed channel in that position.

buttons (1-9 and 0) to select a
list number (1-9 and 0). By doing
so, the displayed channel will
be saved on that list number
without pressing OK.

All

Off

select

“Set favorite”

ok

1 Press FAVORITE.

• Press FAVORITE repeatedly
to change between pages (1/3,
2/3, 3/3, or exit).

26-1 - - -

2 Press Ÿź or a Numbered key

3 Press OK to display the

select

(1-9 and 0) to highlight a channel
on the list.

• Selecting a channel number
from the list with the number
button will display the channel
directly.

ok

highlighted channel.

Viewing

Watching TV

•

A saved channel can be removed from the list by holding

•

To delete a favorite channel

down OK while its position is highlighted.

To change the page

Pressing Ż changes the page backward. Pressing Ź changes the page forward.

21

Viewing from SD Card

You can view movies and photos taken with a digital camera or digital video camera and saved on an SD card.
(Media other than SD Cards may not be reproduced properly.)

Movie player

SD
Card

Open the cover

•

Blue LED

Compliant card type (maximum capacity): SDHC Card (4 GB), SD Card (2 GB), miniSD Card

•

(1 GB) (requiring miniSD Card adapter)
Blue LED lights while SD Card is inserted if set “SD card LED” to “On” in Setup Menu (p. 32).

•

1
2

Insert the SD Card

For cautions and details on SD Cards (p. 53)

•

Select the SD modo

or

Insert the card

•

Label surface

Push until a click is heard

Display menu

Remove the card

•

Press in lightly on SD
Card, then release.

22

Press to return to TV

Ŷ

Press to exit from

Ŷ

menu screen

Press to return to

Ŷ

the previous screen

3

Select “Memory card”

Select “Movie player”

Memory card

Slide show

Photo viewer

Thumbnails

Movie player

Note

No video signals can be output from PROG OUT terminal when playing the

•

movie.

This product is licensed under the AVC patent portfolio license for the personal
and non-commercial use of a consumer to (i) encode video in compliance
with the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was
encoded by a consumer engaged in a personal and non-commercial activity
and/or was obtained from a video provider licensed to provide AVC Video. No
license is granted or shall be implied for any other use. Additional information
may be obtained from MPEG LA, LLC. See http://www.mpegla.com.

select

ok