Panasonic TH-58PZ700U, TH-50PZ700U, TH-42PZ700U Owner’s Manual

Pa-aso-ic

Operating Instructions

High Definition Plasma Television

Manual de instrucciones

Televisor de plasma de alta definici6n

(See page

(vea la p_gina 6)

For assistance (U.S.A.), please call:

1-888-VIEW-PTV (843-9788)

or visit us at www.panasonic.com/contactinfo

For assistance (Puerto Rico), please call:

787-750-4300

or visit us at www.panasonic.com

For assistance (Canada), please call:

1-800-561-5505

or visit us at www.panasonic.ca

Model No.

NQmero de modelo

TH-42PZ700U TH-50PZ700U TH-58PZ700U

@ Pare soIicitarayuda(EE.UU.), Ilame at:

1-888-VIEW-PTV (843-9788)

6visitenos en www.panasonic.com/contactinfo

@ Pare soIicitarayuda(Puerto Rico),Ilame el:

787-750-4300

6 visitenos en www.panasonic.com

BBh:ViVA ,S'_'"

,,o..,_H.,,o__,_,_,_ ,_ _o_ High Definition Sound

English

___ Espa6ol "/Lea estas instrucciones antes de utilizer su televisor y gu&rdelas pare consultarlas an el futuro.

-_ Please read these instructions before operating your set and retain them for future reference.

The images shown in this manual are for illustrative purposes only.

Las imagenes mostradas en este manual tienen solamente fines ilustrativos.

HD3D Sound

TQB2AA0761-1

Turn your own living room into a movie theater!

Experience an amazing level of multimedia excitement

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii1,,,

Illlllllllllllllllllllllllllll

,,,,,,,,,,,,ml

!!!!!!!!!!!!!!!!!!!!!!::,,,'i

,,L ,j , ,-

:::::::::",,,,,,,,,,,,,, IIIIIIIII

SDHC Logo is a [rademark

GalleryPlayer and the GalleryPlayer Logo are

trademarks ot GalleryPlayer Inc

1.4_::lmli

HDMI the HDMI logo and H_gh-Detlnl[ion Mulhmedla Interface are [rademarks

or recjlstered [rademarks of HDMI L_censlng LLC

J___''''''''''''''''''''''''''''' .....

jiiiiiiiiiiiiiiiiii...................................................

% ,.

•"/" _"' i,' .....

BBE.ViVA

a D2_ E) Sound

Manufactured under hcense |rom BBE Sound Inc

High Dehnitlon Sound

Licensed by BBE Sound, Inc under one or more or the

following US )atents 5510752 5736897

BBE and BBE symbol are registered trademarks of BBE

SO[JIld, Inc

_omputer

Amplifier ,,,

Hometheater system

DVDrecorder SetTopBox /

Contents

Please read before using the unit

@Safety Precautions ....................................... 4

@Notes ............................................................ 5

Personal

Enjoy your TV!

Basic Features

@Watching TV ............................................... 20

@Viewing from SD Card ............................... 22

@Watching Videos and DVDs ....................... 24

@Displaying PC Screen on TV ..................... 26

EZ Sync TM

EZ SyncTMisa trademark of

Matsushita Electric Industrial Co., Ltd.

HDAVI Control TM

HDAVI ControFMis a trademark of

Matsushita Electric Industrial Co., Ltd.

Manufactured under license from Dolby Laboratories.

DOLBY and the double-D symbol are

trademarks of DoIby Laboratories.

Advanced Features

@How to Use Menu Functions

(picture, sound quality, etc.) ....................... 28

@ EZ Sync TM "HDAVt Control TM''-.................... 32

@Lock ........................................................... 34

@Editing and Setting Channels .................... 36

@Input Labels/Monitor Out/Closed Caption ...... 38

@Using Timer ................................................ 40

@Operating Peripheral Equipment ............... 41

@Recommended AV Connections ................ 42

FAQs, etc.

@Remote Control Operation/Code List......... 44

@Ratings List for Lock .................................. 48

@Maintenance .............................................. 49

@Technical Information ................................. 50

@FAQ ............................................................ 54

@Specifications ............................................. 56

@Limited Warranty (for U.S.A.) ..................... 57

@Customer Services Directory (for U. S. A.)---- 58

@Limited Warranty (for Canada) ................... 59

Safety Precautions

CAUTION

WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel.

WARNING:

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not place liquid containers (flower vase, cups, cosmetics, etc.) above the set (including on shelves above, etc.).

arrowhead within a triangle

,_The lightning flash with

is intended to tell the user that parts inside the product

are a risk of electric shock to persons.

The exclamation point within a triangle is intended to tell the user that im.portant operating and servicing instructions are in the papers with the appliance.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)

that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the

third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Caution: To assure continued compliance, use only shielded interface cables when connecting to computer or peripheral devices.

Any changes or modifications not expressly approved by Panasonic Corporation of North America could cause harmful interference and would void the user's authority to operate this device.

FCC Declaration of Conformity

Model No. TH-42PZ700U, TH-5OPZ7OOU, TH-58PZ700U

Responsible Party: Panasonic Corporation of North America

One Panasonic Way, Secaucus, NJ 07094

Contact Source: Panasonic Consumer Electronics Company

1-888-VlEW-PTV (843-9788)

email: consumerproductsC_panasonic.com

CANADIAN NOTICE: For Models TH-42PZ700U, TH-5OPZ7OOU, TH-58PZ700U

This Class B digital apparatus complies with Canadian ICES-O03.

11) Only use attachments / accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart /

apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does

not operate normally, or has been dropped.

15) To prevent electric shock, ensure the grounding pin on the

AC cord power plug is securely connected.

I WA""'"G]

SMALL PARTS CAN PRESENT CHOKING HAZARD IF

ACCIDENTALLY SWALLOWED. KEEP SMALL PARTS AWAY FROM YOUNG CHILDREN.

DISCARD UNNEEDED SMALL PARTS AND OTHER OBJECTS, INCLUDING PACKAGING MATERIALS AND PLASTIC BAGS/SHEETS

TO PREVENT THEM FROM BEING PLAYED WITH BY YOUNG CHILDREN, CREATING THE POTENTIAL RISK OF SUFFOCATION.

mSet up

Do not place the Plasma TV on sloped or unstable surfaces. ® A short may occur, which could cause fire. Contact an

® The Plasma TV may fall off or tip over. Authorized Service Center for any repairs that need to be Do not place any objects on top of the Plasma TV.

® If water spills onto the Plasma TV or foreign objects get

inside it, a short-circuit may occur which could result in fire or electric shock. If any foreign objects get inside the Plasma TV, please consult an Authorized Service Center.

This Plasma TV is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury.

(All of the following accessories are manufactured by Matsushita Electric industrial Co., Ltd.)

• Wall-hanging bracket (Vertical) TY-WK42PV3U (TH-42PZ700U, TH-50PZ700U, TH-58PZ700U)

• Wall-hanging bracket (Angled) TY-WK42PR3U (TH-42PZ700U, TH-50PZ700U)

Always be sure to ask a qualified technician to carry out set-up. ® Two or more people are required to install and remove the

television. If two people are not present, the television may be dropped, and personal injury may result.

Transport only in upright position!

® Transporting the unit with its display panel facing upright or

downward may cause damage to the internal circuitry.

mAC Power Supply Cord

The Plasma TV is designed to operate on 120 VAC, 60 Hz. Securely insert the power cord plug as far as it will go.

® If the plug is not fully inserted, heat may be generated which

could cause fire. If the plug is damaged or the wall socket

plate is loose, they should not be used. The included power cord is for use with this unit only. Do not use any power cord other than that provided with this TV. ® Doing so may cause fire or electric shocks. Do not handle the power cord plug with wet hands. ¢_ Doing so may cause electric shocks. Do not do anything that might damage the power cable. When disconnecting the power cable, hold the plug, not the cable. _;_Do not make any modifications to, place heavy objects on,

place near hot objects, heat, bend, twist or forcefully pull the

power cable. Doing so may cause damage to the power cable

which can cause fire or electric shock. If damage to the cable

is suspected, have it repaired at an Authorized Service Center.

If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is detected from the Plasma

TV, unplug the power cord immediately.

® Continued use of the TV under these conditions might cause

fire or permanent damage to the unit. Have the TV evaluated at an Authorized Service Center. Servicing of the TV by any unauthorized personnel is strongly discouraged due to its

high voltage dangerous nature. If water or foreign objects get inside the Plasma TV, if the Plasma TV is dropped, or if the cabinet becomes damaged, disconnect the power cord plug immediately.

made.

[Ac uz,o.]

Do not cover the ventilation holes. ® Doing so may cause the Plasma TV to overheat, which can

cause fire or damage to the Plasma TV. If using the pedestal, leave a space of 3 15/16 " (10 cm) or more at the top, left and right, I 49/64 " (4.5 cm) or more at the bottom, and 2 3/4 " (7 cm) or more at the rear.

mWhen using the Plasma TV

Be sure to disconnect all cables before moving the Plasma TV.

® Moving the TV with its cables attached might damage the

cables which, in turn, can cause fire or electric shock. Disconnect the power plug from the wall outlet as a safety

precaution before carrying out any cleaning. ® Electric shocks can result if this is not done.

Clean the power cable regularly to prevent it from becoming dusty.

® Built-up dust on the power cord plug can increase humidity

which might damage the insulation and cause fire. Unplug the

cord from the wall outlet and clean it with a dry cloth. This Plasma TV radiates infrared rays; therefore, it may affect other infrared communication equipment. Install your infrared sensor in a place away from direct or reflected light from your Plasma TV.

Do not climb up onto the television or use it as a step. (Young children should be made particularly aware of this

caution.) ® If the unit falls over or becomes damaged through misuse,

injury may result. The TV will still consume some power as long as the power cord is inserted into the wall outlet.

mlf problems occur during use

Notes

mDo not display a still picture for a long time

This causes the image to remain on the plasma screen

("image retention"). This is not considered a malfunction and is not covered by the warranty.

Typical still images

_ Channel number and other Iogos ® Image displayed in 4:3 mode

_ SD Card photo ® Video game ® Computer image

To prevent "Image retention", the screen saver is

automatically activated after a few minutes if no signals are sent or no operations are performed. (p. 55)

mSetup

® Do not place the unit where it's exposed to sunlight or other

bright light (including reflections).

® Use of some types of fluorescent lighting may reduce the

remote control's transmission range.

Accessories/Optional Accessory

[_ Check you have all the items shown.

Accessories

[] Remote Control

Transmitter

® N2QAY BOO01O0

[] Batteries for the

Remote Control

Transmitter (2)

e AA Battery

[] Antenna Adapter

÷ F-Type for 5C-2V

[] AC cord [] Pedestal

e TBL2AXO0231

(TH-5OPZ7OOU)

e TBL2AXO0241

(TH-58PZ700U)

e TBL2AXO0251

(TH-42PZ700U)

How to assemble (p.7)

[] Operating Instructions [] Product Registration Card (U.S.A.) [] Quick Setup Guide [] Customer Care Plan Card (U.S.A.)

(For viewing HD programming)

[] Cable clamper (2)

Caution

Note the correct polarity

(+ or-).

i Close

Hook

® Incorrect installation may cause battery

leakage and corrosion, resulting in damage to the remote control.

÷Do not mix old and new batteries. ÷Do not mix different battery types (such as

alkaline and manganese batteries).

÷Do not use rechargeable (Ni-Cd) batteries.

e Do not burn or break batteries. ® Make a note of the remote control codes

before changing batteries in case the codes are reset. (p. 41)

Optional Accessory

Note

® In order to maintain the TV's performance and

safety, be absolutely sure to ask your dealer or a licensed contractor to secure the wall-hanging

brackets.

® Carefully read the instructions accompanying the

Wall-hanging bracket (vertical)

e TY-WK42PV3U

(TH-42PZT00U,TH-50PZT00U,

TH-58PZT00U)

(angle)

¢ TY-WK42PR3U

(TH-42PZ700U,

TH-5OPZ7OOU)

plasma TV stand or pedestal, and be absolutely sure to take steps to prevent the TV from tipping

over.

® Handle the TV carefully during installation since

subjecting it to impact or other forces may cause its paneling to crack.

IIIL

==Assembling the pedestal

@Fix securely with assembly

screws _A_.(Total 4 screws)

Accessories

Pole

Align the stamped

marks.

==Set-up

@Carry out work on a horizontal and level surface.

Pole (O)

Pole

Bottom view

Rear side

Hole for pedestal

installation

Align the marks.

Assembly screw

(4 of each)

M5x 16 (For 42 ", 50 ") M6x 20 (For 58 ")

M5 x 65

Pole (2)a_ _

Base (1)

iF _,

O O

03 O

Pole

Base

Warning

Do not disassemble or modify the pedestal.

@Otherwise the TV may fall over and become damaged, and personal injury may result.

Do not use any television or displays other than those given in these Operating Instructions.

@Otherwise the TV may fall over and become damaged, and personal injury may result.

Do not use the pedestal if it becomes warped or physically damaged.

@If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic

Dealer immediately.

During set-up, make sure that all screws are securely tightened.

@Ifsufficient care is nottaken to ensure screwsare properly tightened during assembly,the pedestal will not be strong enough to

support the TV, and it might fall over andbecome damaged,and personal injury mayresult.

Use the accessory fall-prevention brackets to secure the TV.

@If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal

injury may result.

@Fix securely with assembly screws _6_.

(Total 4 screws)

To Prevent TV from Falling Over

®The TV must be fastened to both a base and a wall.

® Fix pedestal and base together with band.

For 42 " and 50 "

_1_Band (2)

For 58 "

Accessories

_'_ _3]Wood screw

L2#Screw (2)

• Nominal diameter '_ (2) 4 mmx 10 (for 42 ")

4 mm x 12 (for 50 ")

Accessories

_29Screw (3) _3) od screw

• Nominal diameter

_. 4mmx12 _,

@Fix to wall or post with strong commercial wire or chain.

For 42 " and 50 " _...."',

Main screw

Accessories

Remove screw \

screw

Clamp (2)

For 58 "

Accessories

Hook (2) Hook securing screw (2)

• M8x35

Main

Remove

Hook securing screw

0-4

-H

---h

(.{3

Before Connection

==Watching TV

® VH F/UHFAntenna

÷NTSC (National Television System Committee):

Conventional broadcasting

÷ATSC (Advanced Television Systems Committee): or

Digital TV Standards include digital high-definition television (HDTV), standard-definition television (SDTV), data broadcasting, multi-channel

surround-sound audio and interactive television. VHF/UHF Antenna Cable Box/

® Cable Box/Cable Cable

÷You need to subscribe to a cable TV service to enjoy viewing their

programming.

÷You can enjoy high-definition programming by subscribing to a high-definition cable box. The connection can be

done with the use of HDMI or Component Video cable.

• Recording/playing back with DVD recorder or VCR

® DVD Recorder

This source has higher resolution through interlace or progressive signal. Connection can be done with the use of Component Video or HDMI cable. DVD Recorder

®VCR

Connection can be done with the use of an RF cable and Composite Video/S Video cable.

VCR

==Watching Satellite

® You can enjoy high-definition programming by subscribing to

high-definition satellite source. Connection can be done with the use of HDMI or Component Video cable.

Satellite Antenna

Satellite

Receiver

• Enjoying Home theater and DVD recorder with HDMI connection

® Home theater and DVD Recorder

HDMI connection enables you to enjoy higher quality audio and video with a single cable.

f Note

® If your Panasonic DVD Recorder is compatible with EZ Sync (HDAVI control 2), you can operate your Panasonic

DVD Recorder with this TV's remote control (p. 25 EZ SyncTM).

® All cables and external equipment shown in this book are not supplied with the TV. ® For the details of the external equipment's connections, please refer to the operating manuals for the equipment.

==Antenna terminal

==Pinterminals

Home Theater DVD Recorder

• HDMI terminal

10 _

® Firmly tighten by hand.

reen

® Insert firmly_

® Matchcolors of plugsandterminals. ® Insert firmly.

Basic Connection

Back of the TV

VHF/UHF Antenna

AC 120 V

60 Hz

Antenna

terminal

AC Cord

(Connect after all the

other connections.)

VHF/UHF Antenna

Cable TV or

@®

03[33

oo°

(if no Cable Box)

ANT OUT ANTIN

elf using Cable Box

÷Set the TV channel to CH3 or CH4.

Cable Box

@When disconnecting the power cord, be absolutely sure to disconnect the power cord plug from the wall outlet first. @For additional assistance, visit us at: www.panasonic.com

www.panasonic.ca

Basic Connection (Continued)

Back ofthe TV

DVD Recorder

VCR

VHF/UHF Antenna

AC 120 V

60 Hz

AC Cord

12 "

To use PROG OUT terminals (p. 42, 43)

To use S VIDEO terminals

(next page)

To use COMPOSITE terminals

(next page)

To use COMPONENT terminals

(next page)

DVD Recorder or VCR

(with TV tuner)

==To use HDMI terminals

!-!£:11"111

1 AV iN

HDMI

AV OUT

@Connecting to HDMI terminals will enable you to enjoy high-definition digital images and high-quality

sound.

==To use COMPONENT terminals

; _,E::_&"=.....

g,een

'_= L;_......i COMPONENT

,,. ...... l b V,0EOOUT

red red red

_ _:--_>,k DVD Recorder

h=te AUDIO "}/

. #Lm,,,R OUT

red I

@Recorders may also be connected to COMPOSITE or S VIDEO terminals. (see below)

• To use COMPOSITE terminals

@i;i!_ii

• To use S VIDEO terminals

DVD Recorder

VCR

EJ©

. <o

O_ (1)

DVD Recorder

AUDIO

VCR

red

red red

@The S Video input will override the composite @Connecting to S VIDEO terminals will enable

video signal when S Video cable is connected, you to enjoy greater picture quality than using Connect either S Video or Video cable. Composite terminals.

Note

@Some programs contain a copyright protection signal to prevent recording. @When the copyright protection program is displayed, do not connect the other TV monitor through a VCR. Video

signals fed through VCRs may be affected by copyright protection systems and the picture will be distorted on the other TV monitor.

Basic Connection (Continued)

DVD Recorder

VCR

Back ofthe TV

Receiver

Satellite

AC 120 V

60 Hz

AC Cord

VHF/UHF Antenna

To use S VIDEO terminals

(p. 13)

To use COMPOSITE terminals

(p, 13)

Antenna terminal

I iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

I I I

To use HDMI terminals

(p. 13)

ANT OUT ANT IN ANTIN

To use COMPONENT terminals

(p. 13)

DVD Recorder or VCR

(with TV tuner)

Satellite Receiver

==To use HDMI terminals

Receiver

@Connecting to HDMIterminals willenable you to enjoy high-definition digitalimages and high-quality

sound.

==To use COMPONENT terminals

AUDIO

red red

DVD Recorder

Satellite

Receiver

green

COMPONENT PB(_ VIDEO IN

blue

red

red red

green

_(_PB COMPONENT

_{_:J VIDEO OUT

blue

red

@Satellite Receiver may also be connected to COMPOSITE or S VIDEO terminals. (see below)

==To use COMPOSITE terminals

yellow yellow Satellite

COMPOSITE Receiver

IN white white OUT

red red red

==To use S VIDEO terminals

s VIDEO _ S VIDEO

IN OUT

o©

O_ (D

< 0

('3 Q)

¢D

@The S Video input will override the composite

video signal when S Video cable is connected. Connect either S Video or Video cable.

Satellite

Receiver

@Connecting to S VIDEO terminals will enable

you to enjoy greater picture quality than using Composite terminals.

Basic Connection (Continued)

TV Home Theater

DVD Recorder

Back of the TV

DIGITAL

[] AUDIO IN

Note

÷ It is recommended that you use Panasonic's HDMI cable. (R 32) ÷ When Using the COMPONENT VIDEO OUT terminals or the S VIDEO OUT

terminal, refer to p. 15 "To use COMPONENT terminals" or "To use S VIDEO terminals".

÷ If you connect RAM theater or Player theater with HDMI cable, use audio cable

instead of the optical digital audio cable. (p. 43)

Cable clamper

HDMI

AV IN

Home Theater (AV amp)

® Do not bundle the RF cable and AC cord together

(could cause distorted image). ® Fix cables with Cable clamper and Band as necessary. ® When using the options, follow the option's assembly

manual to fix cables.

To open To shut

To attach

insert

To remove from the

Push bothside hooks

To fasten

Accessories Band (2)

(Supplied with Pedestal)

To loosen

tab

Identifying Controls

Display the Main menu.

Choose menu and submenu entry.

Switches TV/VIDEO

SD CARD slot

Volume up/down

(Move cursor right or left during menu mode.)

POWER

button

Power indicator (on: red, off: no light)

@The TV consumes a limited amount of power as long as the power cord is inserted into the wall outlet.

Switches TV to On or Standby

Viewing from SD Card (p. 22-23)

The equipment selection button (p. 24)

Changes the input mode (p. 24)

Re Swing up the door at "PULL". control C.A.T.S. sensor

sensor Plasma C.A.T.S. (Contrast Automatic Tracking System). (p. 28)

Note

Selects channels in sequence (Move cursor up or down during menu mode.)

EZ Sync menu (p. 25, 32-33) Selects Audio Mode for TV viewing

(p. 2O) Displays Main Menu (p. 28)

Exits menus

Video Input 3 connector

uu__

©__.

CD©

Displays Sub Menu (p. 20, 30) Colored buttons

(used for various functions) (for example p. 22, 36)

Channel up/down

Changes aspect ratio (p. 21)

Operates the Favorite channel list

function. (p. 21)

Switches to previously viewed channel and input modes.

Selects/OK/Change Returns to previous menu

Volume up/down

Displays or removes the channel banner (p. 20)

Sound mute On/Off

Numeric keypad to select any channel (p. 20) or press to enter alphanumeric input in menus. (p. 24, 25, 34, 36, 41)

Direct channel access for DTV and DBS (p. 20)

External equipment operations (VCRs, DVDs, etc.) (p. 24)

_ o

"1-

::5-

U (D

First Time Setup

"First time setup" is displayed only when the TV is turned on for the first time after the power cord is inserted into a wall outlet and when "Auto power on" (p. 30-31) is set to "No".

Turn the TV On with the POWER button

POWER

(TV)

Select your language

• Press to exit from '

menu screen

EXiT

• Press to return to

previous screen

RETURN

Note

÷To change setting

(Language/Clock/Auto

program/Picture) later,

go to Menu screen

(p. 28, 30)

F> English 4->Espaflol 4->Frangais_j

RETURN

-- GO back to previous screen.

Adjust the clock

Year: Select the year

Month: Select the month Day: Select the day

Hour: Adjust the hour Minute: Adjust the minute

RETURN

-- Go back to previous screen.

+ 42 hidden pages