Panasonic TH-50PZ750U, TH-58PZ750U User Manual

Model No.

Número de modelo

Español

English

Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.

Lea estas instrucciones antes de utilizar su televisor y guárdelas para consultarlas en el futuro.
Las imágenes mostradas en este manual tienen solamente fines ilustrativos.

For assistance (U.S.A.), please call:

1-888-VIEW-PTV (843-9788)

or visit us at www.panasonic.com/contactinfo

For assistance (Puerto Rico), please call:

787-750-4300

or visit us at www.panasonic.com

For assistance (Canada), please call:

1-800-561-5505

or visit us at www.panasonic.ca

Para solicitar ayuda (EE.UU.), llame al:
1-888-VIEW-PTV (843-9788)
ó visítenos en www.panasonic.com/contactinfo

Para solicitar ayuda (Puerto Rico), llame al:
787-750-4300

ó visítenos en www.panasonic.com

Quick Start Guide

(See page 6)

Guía de inicio rápido

(vea la página 6)

TQB2AA0755

Operating Instructions

High Definition Plasma Television

Manual de instrucciones

Televisor de plasma de alta definición

TH-50PZ750U
TH-58PZ750U

HD3D Sound

ViV

A

2

3

Viewing Advanced FAQs, etc.

Quick Start

Guide

SDHC Logo is a trademark.

GalleryPlayer and the GalleryPlayer

Logo are trademarks of

GalleryPlayer, Inc.

Manufactured under license from BBE Sound, Inc.

Licensed by BBE Sound, Inc. under one or more of the

following US patents: 5510752, 5736897.

BBE and BBE symbol are registered trademarks of BBE

Sound, Inc.

HDMI, the HDMI logo and High-Definition

Multimedia Interface are trademarks

or registered trademarks of HDMI

Licensing LLC.

“AVCHD” and “AVCHD” logo are

trademarks of Matsushita Electric

Industrial Co., Ltd and Sony

Corporation.

Experience an amazing level of multimedia excitement

Turn your own living room into a movie theater!

A

HD3D Sound

ViV

3

Viewing Advanced FAQs, etc.

Quick Start

Guide

Contents

EZ Sync™

EZ Sync™ is a trademark of

Matsushita Electric Industrial Co., Ltd.

HDAVI Control™

HDAVI Control™ is a trademark of

Matsushita Electric Industrial Co., Ltd.

Manufactured under license from Dolby Laboratories.

DOLBY and the double-D symbol are

trademarks of Dolby Laboratories.

Enjoy rich multimedia

SD memory card

Camcorder

Amplifier
Home theater
system

VCR DVD player

DVD recorder Set Top Box

•

Watching TV ···············································20

•

Viewing from SD Card ·······························24

•

Watching Videos and DVDs ·······················28

•

Displaying PC Screen on TV ·····················30

•

How to Use Menu Functions
(picture, sound quality, etc.) ·······················32

•

EZ SyncTM “HDAVI ControlTM” ·····················36

•

Lock ···························································38

•

Editing and Setting Channels ····················40

•

Input Labels/Monitor Out/Closed Caption

······42

•

Using Timer ················································44

•

Operating Peripheral Equipment ···············45

•

Recommended A V Connections ················46

•

Remote Control Operation/Code List ·········48

•

Ratings List for Lock ··································52

•

Maintenance ··············································53

•

Technical Information ·································54

•

FAQ ····························································58

•

Specifications ·············································60

•

Limited Warranty (for U.S.A.) ·····················61

•

Customer Services Directory (for U. S. A.)

····62

•

Limited Warranty (for Canada) ···················63

Enjoy your TV!

Basic Features

Advanced Features

FAQs, etc.

•

Safety Precautions ·······································4

•

Notes ····························································5

Please read before using the unit

•

Accessories/Optional Accessory

··· 6

•

To Prevent TV from Falling Over

··· 8

•

Before Connection ······················ 10

•

Basic Connection ·························11

•

Identifying Controls ····················17

•

First Time Setup ··························18

Quick Start Guide

Personal

computer

4

5

WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.

4 : 3

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Safety Precautions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.

9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.

11) Only use attachments / accessories specified by the
manufacturer.

12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the cart /
apparatus combination to avoid injury
from tip-over.

13) Unplug this apparatus during lightning
storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.

15) To prevent electric shock, ensure the grounding pin on the
AC cord power plug is securely connected.

The lightning flash with
arrowhead within a triangle
is intended to tell the user
that parts inside the product
are a risk of electric shock to
persons.

The exclamation point within
a triangle is intended to
tell the user that important
operating and servicing
instructions are in the papers
with the appliance.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Do not place liquid containers (flower vase, cups, cosmetics, etc.) above the set
(including on shelves above, etc.).

Important Safety Instructions

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.

FCC STATEMENT

FCC Caution:
To assure continued compliance, use only shielded interface cables when connecting to computer or peripheral devices.
Any changes or modifications not expressly approved by Panasonic Corporation of North America could cause harmful
interference and would void the user’s authority to operate this device.

FCC Declaration of Conformity

Model No. TH-50PZ750U, TH-58PZ750U

CANADIAN NOTICE:

For Models TH-50PZ750U, TH-58PZ750U
This Class B digital apparatus complies with Canadian ICES-003.

Responsible Party: Panasonic Corporation of North America

One Panasonic Way, Secaucus, NJ 07094

Contact Source: Panasonic Consumer Electronics Company

1-888-VIEW-PTV (843-9788)

email: [e-mail]

5

4 : 3

12

WARNING/CAUTION

This causes the image to remain on the plasma screen
(“Image retention”). This is not considered a malfunction and is
not covered by the warranty.

Typical still images

To prevent “Image retention”,
the screen saver is
automatically activated after
a few minutes if no signals
are sent or no operations are
performed. (p. 59)

■

Do not display a still picture for a long time

Do not place the unit where it’s exposed to sunlight or other
bright light (including reflections).
Use of some types of fluorescent lighting may reduce the
remote control’s transmission range.

■

Setup

Notes

SMALL PARTS CAN PRESENT CHOKING HAZARD IF
ACCIDENTALLY SWALLOWED.
KEEP SMALL PARTS AWAY FROM YOUNG CHILDREN.
DISCARD UNNEEDED SMALL PARTS AND OTHER OBJECTS,
INCLUDING P ACKAGING MATERIALS AND PLASTIC BAGS/SHEETS
TO PREVENT THEM FROM BEING PLAYED WITH BY YOUNG
CHILDREN, CREATING THE POTENTIAL RISK OF SUFFOCATION.

■

Set up

Do not place the Plasma TV on sloped or unstable surfaces.

The Plasma TV may fall off or tip over.

Do not place any objects on top of the Plasma TV.

If water spills onto the Plasma TV or foreign objects get
inside it, a short-circuit may occur which could result in fire
or electric shock. If any foreign objects get inside the Plasma
TV, please consult an Authorized Service Center.

This Plasma TV is for use only with the following optional
accessories. Use with any other type of optional accessories may
cause instability which could result in the possibility of injury.

(All of the following accessories are manufactured by
Matsushita Electric Industrial Co., Ltd.)

• Wall-hanging bracket (Vertical) TY-WK42PV3U
(TH-50PZ750U, TH-58PZ750U)

• Wall-hanging bracket (Angled) TY-WK42PR3U

(TH-50PZ750U)

Always be sure to ask a qualified technician to carry out set-up.

Two or more people are required to install and remove the
television. If two people are not present, the television may
be dropped, and personal injury may result.

Transport only in upright position!

Transporting the unit with its display panel facing upright or
downward may cause damage to the internal circuitry.

■

AC Power Supply Cord

The Plasma TV is designed to operate on 120 V AC, 60 Hz.
Securely insert the power cord plug as far as it will go.

If the plug is not fully inserted, heat may be generated which
could cause fire. If the plug is damaged or the wall socket
plate is loose, they should not be used.

The included power cord is for use with this unit only.
Do not use any power cord other than that provided with this TV.

Doing so may cause fire or electric shocks.

Do not handle the power cord plug with wet hands.

Doing so may cause electric shocks.

Do not do anything that might damage the power cable. When
disconnecting the power cable, hold the plug, not the cable.

Do not make any modifications to, place heavy objects on,
place near hot objects, heat, bend, twist or forcefully pull the
power cable. Doing so may cause damage to the power cable
which can cause fire or electric shock. If damage to the cable
is suspected, have it repaired at an Authorized Service Center.

■

If problems occur during use

If a problem occurs (such as no picture or no sound), or if
smoke or an abnormal odor is detected from the Plasma
TV, unplug the power cord immediately.

Continued use of the TV under these conditions might cause
fire or permanent damage to the unit. Have the TV evaluated
at an Authorized Service Center. Servicing of the TV by any
unauthorized personnel is strongly discouraged due to its
high voltage dangerous nature.

If water or foreign objects get inside the Plasma TV, if the
Plasma TV is dropped, or if the cabinet becomes damaged,
disconnect the power cord plug immediately.

A short may occur, which could cause fire. Contact an
Authorized Service Center for any repairs that need to be
made.

Do not cover the ventilation holes.

Doing so may cause the Plasma TV to overheat, which can
cause fire or damage to the Plasma TV.

If using the pedestal, leave a space of 3 15/16 ” (10 cm) or
more at the top, left and right, 1 49/64 ” (4.5 cm) or more at
the bottom, and 2 3/4 ” (7 cm) or more at the rear.

■

When using the Plasma TV

Be sure to disconnect all cables before moving the Plasma
TV.

Moving the TV with its cables attached might damage the
cables which, in turn, can cause fire or electric shock.

Disconnect the power plug from the wall outlet as a safety
precaution before carrying out any cleaning.

Electric shocks can result if this is not done.

Clean the power cable regularly to prevent it from
becoming dusty.

Built-up dust on the power cord plug can increase humidity
which might damage the insulation and cause fire. Unplug the
cord from the wall outlet and clean it with a dry cloth.

This Plasma TV radiates infrared rays; therefore, it may
affect other infrared communication equipment.
Install your infrared sensor in a place away from direct or
reflected light from your Plasma TV.
Do not climb up onto the television or use it as a step.
(Young children should be made particularly aware of this
caution.)

If the unit falls over or becomes damaged through misuse,
injury may result.

The TV will still consume some power as long as the power
cord is inserted into the wall outlet.

Channel number and other logos
Image displayed in 4:3 mode
SD Card photo Video game Computer image

WARNING

CAUTION

6

7

Quick Start

Guide

A

a

b

Accessories/Optional Accessory

1

Open

Hook

2

Note the correct polarity
(+ or -).

Close

Caution

Wall-hanging bracket

Accessories

(angle)

•

TY-WK42PR3U

(TH-50PZ750U)

Check you have all the items shown.

Remote Control
Transmitter

•

N2QAYB000099

Cable clamper (2)Batteries for the
Remote Control
Transmitter

(2)

•

AA Battery

AC cord

Antenna Adapter

•

F-Type for 5C-2V

Pedestal

•

TBL2AX00211
(TH-50PZ750U)

•

TBL2AX00221
(TH-58PZ750U)

How to assemble (p.7)

Note

•

In order to maintain the TV’s performance and
safety, be absolutely sure to ask your dealer or
a licensed contractor to secure the wall-hanging
brackets.

•

Carefully read the instructions accompanying the
plasma TV stand or pedestal, and be absolutely
sure to take steps to prevent the TV from tipping
over.

•

Handle the TV carefully during installation since
subjecting it to impact or other forces may cause
its paneling to crack.

(vertical)

•

TY-WK42PV3U

(TH-50PZ750U,

TH-58PZ750U)

B

B

Optional Accessory

Installing the remote’s batteries

b

Product Registration Card (U.S.A.)
Customer Care Plan Card (U.S.A.)

Operating Instructions
Quick Setup Guide

(For viewing HD programming)

•

Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control.

•

Do not mix old and new batteries.

•

Do not mix different battery types (such as
alkaline and manganese batteries).

•

Do not use rechargeable (Ni-Cd) batteries.

•

Do not burn or break batteries.

•

Make a note of the remote control codes
before changing batteries in case the
codes are reset. (p. 45)

7

Quick Start

Guide

Accessories/Optional Accessory

A

a

b

Caution

Do not use any television or displays other than those given in this Operating Instructions.

•

Otherwise the TV may fall over and become damaged, and personal injury may result.

Do not use the pedestal if it becomes warped or physically damaged.

•

If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.

During set-up, make sure that all screws are securely tightened.

•

If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to
support the TV, and it might fall over and become damaged, and personal injury may result.

Use the accessory fall-prevention brackets to secure the TV.

•

If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal
injury may result.

Warning

Do not disassemble or modify the pedestal.

•

Otherwise the TV may fall over and become damaged, and personal injury may result.

Base (1)

M5 x 16 (For 50 ”)
M6 x 20 (For 58 ”)

M5 x 65

Pole (2)

•

Fix securely with assembly screws B.
(Total 4 screws)

B

Assembly screw
(4 of each)

Fix
with

Attaching the pedestal to TV

Accessories

b

Pole

Front

Pole
(

)

Pole
( )

Pole

Front

Align the stamped
marks.

Align the stamped
marks.

■

Set-up

Label

Rear side

Arrow mark

Pole

Hole for pedestal
installation

•

Carry out work on a horizontal and level surface.

■

Assembling the pedestal

•

Fix securely with assembly
screws A. (Total 4 screws)

Pole

Base

Bottom view

A

A

a

B

8

9

Quick Start

Guide

•

Fix pedestal and base together with band.

Securing to a base

To Prevent TV from Falling Over

•

The TV must be fastened to both a base and a wall.

Band (2) Screw (2)

Wood screw

(2)

Accessories

• Nominal diameter
4 mm x 12

For 50 ” For 50 ”

For 58 ” For 58 ”

Band (3) Screw (3)

Wood screw

(3)

Accessories

• Nominal diameter
4 mm x 12

9

Quick Start

Guide

To Prevent TV from Falling Over

Main screw

•

Fix to wall or post with strong commercial wire or chain.

Main screw

Remove
screw

Securing to a wall

Remove
cap

Hook securing
screw

Hook (2) Hook securing screw (2)

• M8 x 35

Accessories

Clamp (2)

Accessories

Hook

10

11

Quick Start

Guide

To connect antenna terminals

Reference of connection

Before Connection

■

Antenna terminal

■

Pin terminals

■

HDMI terminal

•

Firmly tighten by hand.

•

Match colors of plugs and terminals.

•

Insert firmly.

•

Insert firmly.

Connected Equipment Introduction (Signal source)

VHF/UHF Antenna Cable Box/

Cable

or

■

Recording/playing back with DVD recorder or VCR

•

DVD Recorder
This source has higher resolution through interlace or progressive signal.
Connection can be done with the use of Component Video or HDMI cable.

•

VCR
Connection can be done with the use of an RF cable and Composite Video/S Video cable.

■

Watching Satellite

•

You can enjoy high-definition programming by subscribing to
high-definition satellite source. Connection can be done with the use of
HDMI or Component Video cable.

Satellite

Receiver

Satellite Antenna

greenbluered

green

Note

•

If your Panasonic DVD Recorder is compatible with EZ Sync (HDAVI control 2), you can operate your Panasonic

DVD Recorder with this TV’s remote control (p. 29 EZ Sync

TM

).

•

All cables and external equipment shown in this book are not supplied with the TV.

•

For the details of the external equipment’s connections, please refer to the operating manuals for the equipment.

■

Enjoying Home theater and DVD recorder with
HDMI connection

•

Home theater and DVD Recorder

HDMI connection enables you to enjoy higher quality audio and video with

a single cable.

DVD RecorderHome Theater

DVD Recorder

■

Watching TV

•

VHF/UHF Antenna

•

NTSC (National Television System Committee):

Conventional broadcasting

•

ATSC (Advanced Television Systems Committee):

Digital TV Standards include digital high-definition television (HDTV),

standard-definition television (SDTV), data broadcasting, multi-channel
surround-sound audio and interactive television.

•

Cable Box/Cable

• You need to subscribe to a cable TV service to enjoy viewing their
programming.

•

You can enjoy high-definition programming by subscribing to a high-definition cable box. The connection can be
done with the use of HDMI or Component Video cable.

VCR

or

11

Quick Start

Guide

Basic Connection (Antenna + TV)

Before Connection

To connect antenna terminals

Basic Connection

Connecting Antenna (To watch TV)

Example 1

(If no Cable Box)

•

If using Cable Box

•

Set the TV channel to CH3 or CH4.

AC Cord
(Connect after all the
other connections.)

Cable TV

VHF/UHF Antenna

TV

Back of the TV

Cable TV

AC 120 V

60 Hz

VHF/UHF Antenna

Cable Box

Antenna

terminal

Note

•

When disconnecting the power cord, be absolutely sure to disconnect the power cord plug from the wall outlet first.

•

For additional assistance, visit us at: www.panasonic.com

www.panasonic.ca

or

or

21 AV IN

ANTENNA

Cable In

ANT OUT ANT IN

12

13

Quick Start

Guide

To connect antenna terminals

High-Definition

Standard-Definition

AUDIOVIDEO

Y Y

L L

R R

P

B

P

B

P

R

P

R

COMPONENT VIDEO

INPUT

12

L

R

Y

P

B

PR

S VIDEO

PROG

L

R

L

R
TO AU

1

INPUT2INPUT

2

L

R

L

R

P

R

L

R

IDEO
2

INPUT

1

Basic Connection (Continued)

Connecting DVD recorder (VCR) (To record/playback)

Example 2

To use HDMI
terminals
(next page)

To use COMPONENT terminals
(next page)

To use COMPOSITE terminals
(next page)

VHF/UHF Antenna

DVD Recorder

or

VCR

TV

Back of the TV

AC Cord

AC 120 V

60 Hz

VHF/UHF Antenna

DVD Recorder or VCR

(with TV tuner)

Antenna
terminal

To use S VIDEO terminals
(next page)

To use PROG OUT terminals
(p. 46, 47)

Y

B

P

P

R

L

AUDIOVIDEO

R

COMPONENT VIDEO

INPUT

12

LR

HDMI 1

S VIDEO

VIDEO

L

AUDIO

R
TO AUDIO AMP

PROG OUT

AUDIO IN

AUDIO

AUDIO

IN

IN

HDMI 2

AUDIO IN

DIGITAL

AUDIO

OUT

PC

Y

P

P

L

R

B

R

L

R

INPUT

L

R

INPUT

2

1

ANTENNA

Cable In

21 AV IN

ANT OUT ANT IN

13

Quick Start

Guide

Basic Connection

(TV + DVD Recorder or VCR)

High-Definition

Standard-Definition

AUDIOVIDEO

Y Y

L L

R R

P

B

P

B

P

R

P

R

COMPONENT VIDEO

INPUT

12

L

R

Y

P

B

PR

S VIDEO

PROG

L

R

L

R
TO AU

1

INPUT

2

INPUT

2

L

R

L

R

P

R

L

R

IDEO
2

INPUT

1

•

Some programs contain a copyright protection signal to prevent recording.

•

When the copyright protection program is displayed, do not connect the other TV monitor through a VCR. Video
signals fed through VCRs may be affected by copyright protection systems and the picture will be distorted on the
other TV monitor.

Note

■

To use HDMI terminals

■

To use COMPONENT terminals

•

Recorders may also be connected to COMPOSITE or S VIDEO terminals. (see below)

•

Some programs contain a copyright protection signal to prevent recording.

•

When the copyright protection program is displayed, do not connect the other TV monitor through a VCR. Video
signals fed through VCRs may be affected by copyright protection systems and the picture will be distorted on the
other TV monitor.

Note

DVD Recorder

DVD Recorder

HDMI
AV OUT

COMPONENT
VIDEO OUT

AUDIO
OUT

white

red

green

blue

red

white
red

green

blue

white

red

white

red

AUDIO
OUT

S VIDEO
OUT

red

■

To use COMPOSITE terminals

■

To use S VIDEO terminals

VCR

COMPOSITE
OUT

yellow

white

red

yellow

white

red

VCR

•

The S Video input will override the composite
video signal when S Video cable is connected.
Connect either S Video or Video cable.

•

Connecting to S VIDEO terminals will enable
you to enjoy greater picture quality than using
Composite terminals.

white

red

green

blue

red

white

red

yellow

white

red

•

Connecting to HDMI terminals will enable you to enjoy high-definition digital images and high-quality
sound.

or

DVD Recorder

or

DVD Recorder

21 AV IN

L

R

L

R

14

15

Quick Start

Guide

To connect antenna terminals

Connecting TV and DVD recorder (VCR)

To connect DVD recorder

and satellite receiver

To connect VCR and

satellite receiver

Example 3

Connecting DVD recorder (VCR) and satellite receiver

Connect in the same way as on p. 13.

Basic Connection (Continued)

DVD Recorder

or

VCR

Satellite

Receiver

TV

Satellite ReceiverDVD Recorder or VCR

(with TV tuner)

VHF/UHF Antenna

VHF/UHF Antenna

Back of the TV

AC Cord

AC 120 V

60 Hz

To use HDMI
terminals
(p. 13)

To use COMPONENT terminals
(p. 13)

To use COMPOSITE terminals
(p. 13)

To use S VIDEO terminals
(p. 13)

Antenna
terminal

Y

B

P

P

R

L

AUDIOVIDEO

R

COMPONENT VIDEO

INPUT

12

LR

HDMI 1

S VIDEO

VIDEO

AUDIO

TO AUDIO AMP

PROG OUT

AUDIO IN

AUDIO

AUDIO

IN

IN

HDMI 2

AUDIO IN

DIGITAL

AUDIO

OUT

PC

Y

B

P

P

R

L

R

L

R

INPUT

1

L

RLR

INPUT

2

ANTENNA

Cable In

21 AV IN

ANT OUT ANT IN

ANT IN

15

Quick Start

Guide

Basic Connection

(TV + DVD Recorder or VCR + Satellite receiver)

To connect DVD recorder

and satellite receiver

To connect VCR and

satellite receiver

white

red

white

red

green

blue

red

green

blue

red

■

To use HDMI terminals

■

To use COMPONENT terminals

•

Satellite Receiver may also be connected to COMPOSITE or S VIDEO terminals. (see below)

Satellite

Receiver

Satellite

Receiver

HDMI
AV OUT

white

red

white

red

AUDIO
OUT

S VIDEO
OUT

DVD Recorder

DVD Recorder

■

To use COMPOSITE terminals

■

To use S VIDEO terminals

Satellite

Receiver

COMPOSITE
OUT

VCR

VCR

yellow

white

red

yellow

white

red

Satellite

Receiver

•

The S Video input will override the composite
video signal when S Video cable is connected.
Connect either S Video or Video cable.

•

Connecting to S VIDEO terminals will enable
you to enjoy greater picture quality than using
Composite terminals.

AUDIO
OUT

white

red

yellow

white

red

white

red

green

blue

red

white

red

yellow

white

red

white

red

green

blue

red

COMPONENT
VIDEO OUT

AUDIO
IN

COMPONENT
VIDEO IN

S VIDEO
IN

AUDIO
IN

HDMI
AV IN

COMPOSITE
IN

•

Connecting to HDMI terminals will enable you to enjoy high-definition digital images and high-quality
sound.

L

PB

P

R

Y

R

L

R

Y

P

B

PR

L

R

L

R

L

R

L

R

16

17

Quick Start

Guide

To connect HDMI terminals

VIDEO

DIGITAL

AUDIO

OUT

AUDIO

AUDIO

21 AV IN

-

SUB
MENU

-

AV IN

3

Basic Connection (Continued)

Example 4

Connecting Home Theater and DVD recorder

Home Theater

DVD Recorder

TV

DIGITAL
AUDIO IN

DVD Recorder

Home Theater
(AV amp)

HDMI
AV OUT

HDMI
AV IN

HDMI
AV OUT

•

It is recommended that you use Panasonic’s HDMI cable. (P. 36)

•

When Using the COMPONENT VIDEO OUT terminals or the S VIDEO OUT
terminal, refer to p. 15 “To use COMPONENT terminals” or “To use S VIDEO
terminals”.

•

If you connect RAM theater or Player theater with HDMI cable, use audio cable
instead of the optical digital audio cable. (p. 47)

Note

or

Home theater

(HDMI AV OUT)

Home theater

(DIGITAL AUDIO IN)
(When listening to TV audio) [ATSC only]

AC cord

Cable Binding Instructions

•

Do not bundle the RF cable and AC cord together
(could cause distorted image).

•

Fix cables with Cable clamper and Band as necessary.

•

When using the options, follow the option’s assembly
manual to fix cables.

Push until it
clicks

To fix

Press catch in
and pull away

To release

Back of the TV

Accessories

Band (2)
(Supplied with
Pedestal)

To open To shut

Push both side hooks

To remove from the
TV

Insert

To attach To fasten To loosen

tab

Band

Cable clamper

17

Quick Start

Guide

Identifying Controls

Basic Connection (TV + Home Theater + DVD Recorder)

-

SUB
MENU

-

AV IN

3

Identifying Controls

•

The TV consumes a limited amount of power as long as the power cord is inserted into the wall outlet.

Note

Switches TV to On or Standby
Viewing from SD Card (p. 24-27)
The equipment selection button (p. 28)

Changes the input mode (p. 28)

Displays Sub Menu (p. 21, 34)
Colored buttons

(used for various functions)
(for example p. 24, 26, 40)

Channel up/down

Changes aspect ratio (p. 21)

Operates the Favorite channel list
function. (p. 22)

Switches to previously viewed channel
and input modes.

SPLIT

Split Screen (p. 22)

SWAP

Swap pictures in SPLIT operation (p. 22)

EZ Sync menu (p. 29, 36-37)
Selects Audio Mode for TV viewing

(p. 21)
Displays Main Menu (p. 32)
Exits menus
Selects/OK/Change
Returns to previous menu

Volume up/down
Displays or removes the channel

banner (p. 21)
Sound mute On/Off
Numeric keypad to select any

channel (p. 20) or press to enter
alphanumeric input in menus.
(p. 28, 29, 38, 40, 45)

Direct channel access for DTV and
DBS (p. 20)

External equipment operations
(VCRs, DVDs, etc.) (p. 28)

POWER
button

Swing up the door at “PULL”.

Remote
control
sensor

Volume up/down
(Move cursor right or left during menu mode.)

Video Input 3 connector

Power indicator (on: red, off: no light)

C.A.T.S. sensor
Plasma C.A.T.S. (Contrast Automatic Tracking System). (p. 32)

Display the Main menu.

Choose menu and submenu entry.

Selects channels in sequence
(Move cursor up or down during menu mode.)

SD CARD slot

Switches TV/VIDEO

HDMI input 3 connector

SUB
MENU

18

19

Quick Start

Guide

Apply Cancel

...

.

Yes

...

.

Yes

...

.

Yes

or

First Time Setup

“First time setup” is displayed only when the TV is turned on for the first time after the power cord is
inserted into a wall outlet and when “Auto power on” (p. 34-35) is set to “No”.

Turn the TV On with the POWER button

1

Select your language

2

Adjust the clock

3

Year: Select the year
Month: Select the month
Day: Select the day
Hour: Adjust the hour
Minute: Adjust the minute

Go back to previous screen.

■

Press to exit from
menu screen

■

Press to return to
previous screen

Note

•

To change setting
(Language/Clock/Auto
program/Picture) later,
go to Menu screen
(p. 32, 34)

English Español Français

next

select

set
select item

Go back to previous screen.

or

next

select

(TV) (Remote)

First time setup

Language

Clock
Auto program
Picture

Language

Language

English

First time setup

Language

Clock

Auto program
Picture

Clock

Year

Month
Day
Hour
Minute

2007

1
7

10 AM

10

19

Quick Start

Guide

First Time Setup

Apply Cancel

...

.

Yes

...

.

Yes

...

.

Yes

next

select

select

“Apply”

ok

next

select

set

select

ANT in

Cable: Cable TV
Antenna: Antenna

Auto channel setup

4

Select “Auto”

Select “Auto program”

Select “ANT in”

Confirm registered channels

•

Available channels (analog/digital)
are automatically set.

•

If OK is not pressed after selecting “Apply”, the channels will not be saved.

•

If you perform scanning more than twice, previously saved channels are erased.

Note

•

About broadcasting
systems

Analog (NTSC):

traditional TV
programming

Digital (ATSC):

new programming
that allows you to
view more channels
featuring high-quality
video and sound

■

Press to exit from
menu screen

ok

select

All channels: Scans digital and analog channels
Analog only: Scans Analog channels only
Digital only: Scans Digital channels only

Start scanning the channels

Select scanning mode (ALL channels/Analog only/Digital only)

(Refer to p. 32)

First time setup

Language
Clock

Auto program

Picture

Program channel

ANT in

Auto

Cable

Program channel

ANT in

Auto

Cable

Auto program

All channels
Analog only

Digital only

Auto program

Scanning digital channel
progress

Quit 40%

5

First time setup

Language
Clock
Auto program

Picture

20

21

Viewing

15-2 12:30 pm

30

THE NEWS

CC SAP

TV-G 1080i Standard 4:3

ABC-HD

SUB
MENU

-

SUB
MENU

Watching TV

Connect the TV to a cable box/cable, set-top-box, satellite box, or antenna cable (p. 10-15)

up

down

or

■

To directly input the digital channel number

example: CH15-1:

-

Note

•

Reselect “Cable” or “Antenna” in “ANT in” of “Program channel” to switch the
signal reception between cable TV and antenna. (p. 19, 41)

•

The channel number and volume level remain the same even after the TV is
turned off.

-

When tuning to a digital channel, press the button to enter the
minor number in a compound channel number.

Note

•

If the mode is not TV, press and select TV. (p. 28)

Turn power on

1

2

Select a channel number

SUB
MENU