Panasonic TH-47LFT30W User Guide

Operating Instructions

DISPLAY Edition

FULL HD LCD Display

Model No.

TH-47LFT30W TH-47LFX30W

English

Please read these instructions before operating your set and retain them for future reference.

Dear Panasonic Customer

Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new LCD Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and note down the model number and serial number of your set in the space provided on the rear cover of these instructions. Visit our Panasonic Web Site http://panasonic.net

Precautions for Installation

• Do not install by yourself. Please ask a installation professional or your dealer to install.

• This product corresponds to IP53 resistance of the product.

• Please note the dust and water resistance of this product does not guarantee damage or fault free.

CAUTION

This product corresponds to international standard IP rating (Ingress Protection) dust ingress protection level 5 and water ingress protection level 3.

Terminal cover

After connecting cable etc. of the device to the terminals, check if the terminal cover is sealed correctly and closed ¿ rmly using all the ¿ xing screws when attaching the terminal cover. To seal the terminal cover correctly, be aware of the following points:

Check if the ¿ xing sealant is ¿ xed in the correct position in the cover. Fixing sealant is an important part to seal the cable part.

Terminal part on main unit rear side

Fixing sealant

dust and water protection standard. Do not change or damage dust or water

Using with dust or water resistance degraded causes fire, electric shock, or product damage.

Note:

Terminal cover rear side

IPX3 water resistance refers to the capability to prevent the harmful effects of water falling as a droplet at any angle up to 60 degrees from the vertical.

Fixing sealant

Stick the cable to the shape of the dent on the terminal strip base tightly.

*1: Based on tests performed by Cosmos Corporation.

Fixing sealant

The structure is to keep the airtightness

by tucking the cable pulled out along the dent on the terminal strip base with both fixing sealant of the terminal strip base and terminal cover.

iii

Precautions for Installation

Power cable

To keep the waterproof property, do not loosen the part ¿ xing the power cable to the main unit.

Do not force to bend the protruding part of the power cable. This may cause disconnection.

Main unit bottom

Protective coating

Cabinet aluminum parts and rear face are protected from corrosion with coating. Be careful not to damage the surface. In case the surface is damaged, corrosion may occur from there.

Installation position

• When direct sunlight is on the screen, black shadow may appear. This will disappear when the temperature drops.

• To install the product long term in a special environment such as near a swimming pool, hot spring, or ocean, or in a factory uses chemicals or gases, please consult your local Panasonic dealer beforehand.

• The product is equipped with cooling fans and air ¿ lters that need to be cleaned or replaced if covered with dust. Removing or installing air ¿ lters requires space around the Display. With this in mind, provide adequate space when installing the Display. [Height 7.874”/200 mm or greater, Width 7.874”/200 mm or greater, Depth 7.874”/200 mm or greater]

d:7.874”/200 mm or greater

Installation conditions

To use the product in an environment where outdoor air temperature is lower than 39 °F (4 °C), make sure to set the “Winter Mode” to “On”. The inside temperature is kept constant and the startup can be performed smoothly. (see page 40)

Do not exhibit or use this product in a condition where water splashes on to it continuously for long time.

Always use the product at an ambient temperature in the range of 32 °F - 113 °F / 0 °C - 45 °C (during Winter Mode: -4 °F - 113 °F / -20 °C - 45 °C). Use the product at ambient temperatures up to 104 °F/40 °C at an installation site where the display screen is exposed to sunlight.

To install on a wall etc.

• Consult your dealer about ¿ ttings etc. beforehand.

• Choose a permanent position where the total weight of the product and ¿ ttings can be hold permanently. If the strength of the position is not suf¿ cient, a serious accident such as fall may be caused.

• Do not install the product where a person can be hang or lean on, or a passer may collide into. Accident may be caused.

• Take measures for tipping over and fall with an assumption of a ¿ tting or installation location failure.

• Installation strength may be degraded due to aging depends on the environment. Ask a installation professional to inspect or repair regularly.

• When an abnormality or fault such as loose screw is detected, ask an installation professional or your dealer immediately for repair.

• Panasonic will not be responsible for any damages from an accident such as defect of installation, improper use, modi¿ cation, or natural disaster.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to quali¿ ed service personnel.

The lightning flash with arrow-head within a triangle is in tend ed to tell the user that parts inside the product are a risk of electric shock to per sons.

The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the ap pli ance.

WARNING : To prevent damage which may result in ¿ re or shock hazard, do not expose this apparatus to rain

or mois ture. Do not place containers with water (À ower vase, cups, cosmetics, etc.) above the set. (including on shelves above, etc.)

WARNING : 1) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to

quali¿ ed service personnel.

2) Do not remove the grounding pin on the power plug. This apparatus is equipped with a three pin grounding-type power plug. This plug will only ¿ t a grounding-type power outlet. This is a safety fea ture. If you are unable to insert the plug into the outlet, contact an electrician.

Do not defeat the purpose of the grounding plug.

This ENERGY STAR mark is applicable in USA only.

As an ENERGY STAR® Partner, Panasonic has determined that this product meets the ENERGY STAR

guidelines for energy ef¿ ciency.

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli¿ ers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not ¿ t into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments / accessories speci¿ ed by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table speci¿ ed by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to quali¿ ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15) To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced technician for help.

This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC CAUTION: To assure continued compliance, follow the attached installation instructions and use only shielded interface cables when connecting to computer or peripheral devices. Any changes or modi¿ cations not expressly approved by Panasonic Corp. of North America could void the user's authority to operate this device.

FCC Declaration of Conformity

Model No. TH-47LFT30W, TH-47LFX30W

Responsible Party: Panasonic Corporation of North America Three Panasonic Way 2F-5, Secaucus, NJ 07094 Contact Source: Panasonic Solutions Company Panasonic Plasma Concierge 1-800-973-4390

CANADIAN NOTICE:

This Class B digital apparatus complies with Canadian ICES-003.

vii

Important Safety Notice

IMPORTANT: THE MOULDED PLUG

WARNING

1) No naked À ame sources, such as lighted candles, should be placed on / above the set.

2) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to quali¿ ed service personnel.

3) Do not remove the earthing pin on the power plug. This apparatus is equipped with a three pin earthing-type power plug. This plug will only ¿ t an earthing-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician.

Do not defeat the purpose of the earthing plug.

4) To prevent electric shock, ensure the earthing pin on the AC cord power plug is securely connected.

CAUTION

This appliance is intended for use in environments which are relatively free of electromagnetic ¿ elds. Using this appliance near sources of strong electromagnetic ¿ elds or where electrical noise may overlap with the input signals could cause the picture and sound to wobble or cause interference such as noise to appear. To avoid the possibility of harm to this appliance, keep it away from sources of strong electromagnetic ¿ elds.

FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.

This display is supplied with a moulded three pin mains plug for your safety and convenience. A 10 amp fuse is ¿ tted in this plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating of 10 amps and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark

If the plug contains a removable fuse cover, you must ensure that it is re¿ tted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic dealer.

Do not cut off the mains plug. Do not use any other type of mains lead except the one supplied with this display. The supplied mains lead and moulded plug are designed to be used with this display to avoid interference and for your safety. If the socket outlet in your home is not suitable, get it changed by a quali¿ ed electrician. If the plug or mains lead becomes damaged, purchase a replacement from an authorized dealer.

WARNING : — THIS DISPLAY MUST BE EARTHED.

How to replace the fuse.

IMPORTANT: THE MOULDED PLUG

or the BSI mark on the body of the fuse.

ASA

Open the fuse compartment with a screwdriver and replace the fuse.

viii

Table of Contents

Precautions for Installation .................................... iii

Important Safety Instructions ................................. vi

FCC STATEMENT .................................................... vii

Important Safety Notice ........................................ viii

Safety Precautions ................................................... 2

Accessories .............................................................. 7

Accessories Supply ................................................. 7

Remote Control Batteries ........................................ 8

About Power Supply Cord ....................................... 9

Connections ............................................................ 10

AC cord connection ............................................... 10

How to remove terminal cover ............................... 10

Video equipment connection ..................................11

HDMI connection ................................................... 12

DVI-D IN connection .............................................. 12

PC Input Terminals connection .............................. 13

SERIAL Terminals connection ............................... 14

Power On / Off ......................................................... 15

Selecting the input signal ...................................... 17

Basic Controls ........................................................ 18

ASPECT Controls ................................................... 20

Digital Zoom ............................................................ 21

On-Screen Menu Displays ..................................... 22

Adjusting Pos. /Size ............................................... 23

Picture Adjustments ............................................... 25

Advanced settings ................................................. 26

Sound Adjustment .................................................. 27

PRESENT TIME Setup / Set up TIMER .................. 28

PRESENT TIME Setup .......................................... 28

Set up TIMER ........................................................ 29

Screensaver (For preventing image retention) .... 30

Setup of Screensaver Time ................................... 31

Wobbling ................................................................. 31

Reduces power consumption ............................... 32

Customizing the Input labels ................................. 33

Selecting the On-Screen Menu Language ............ 34

Customizing the On-Screen Menu Display .......... 34

Setup for MULTI DISPLAY ...................................... 35

How to Setup MULTI DISPLAY ............................. 35

Setup for Input Signals .......................................... 37

Signal menu .......................................................... 37

Cinema reality ....................................................... 37

XGA Mode ............................................................. 37

Sync ...................................................................... 38

Input signal display ................................................ 38

Options Adjustments ............................................. 39

Troubleshooting ..................................................... 41

Applicable Input Signals ........................................ 42

Shipping condition ................................................. 44

Speci¿ cations ......................................................... 45

Trademark Credits

• VGA is a trademark of International Business Machines Corporation.

• Macintosh is a registered trademark of Apple Inc., USA.

• SVGA, XGA, SXGA and UXGA are registered trademarks of the Video Electronics Standard Association. Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected.

• HDMI, the HDMI Logo, and High-De¿ nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Note:

Image retention may occur. If you display a still picture for an extended period, the image might remain on the screen. However, it will disappear after a while.

Safety Precautions

WARNING

Setup

Always be sure to ask a quali¿ ed technician to carry out set-up.

Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from being played with by young children, creating the potential risk of suffocation.

Do not place any objects on top of the Display.

• If any foreign objects get inside the Display, please consult your local Panasonic dealer.

Transport only in upright position!

• Transporting the unit with its display panel facing upright or downward may cause damage to the internal circuitry.

Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table cloths and curtains.

For suf¿ cient heat release; Leave a space of 7.874" (20 cm) or more at the top, bottom, right, left, and rear to install.

• Use the product within the operating condition temperature range.

• Do not block any inlet or outlet of the Display.

Cautions for Wall Installation

• Wall installation should be performed by an installation professional. Installing the Display incorrectly may lead to an accident that results in death or serious injury. Furthermore, when installing on a wall, a wall hanging bracket that conforms to VESA standards (VESA 400 × 400) must be used.

• When installing the Display vertically, turn up the terminal cover for the upward direction.

Safety Precautions

When using the LCD Display

The Display is designed to operate on 110 - 127 or 220 - 240 V AC, 50/60 Hz.

Attach the terminal cover ¿ rmly to use.

• Otherwise the dust and water resistance is damaged and may cause ¿ re, electric shock or product damage.

Do not stick any foreign objects into the Display.

• Do not insert any metal or À ammable objects into the Display or drop them onto the Display, as doing so can cause ¿ re or electric shock.

Do not remove the cover or modify it in any way.

• High voltages which can cause severe electric shocks are present inside the Display. For any inspection, adjustment and repair work, please contact your local Panasonic dealer.

Ensure that the mains plug is easily accessible.

An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing connection.

Do not use any power supply cord other than that provided with this unit.

• Doing so may cause ¿ re or electric shocks.

Securely insert the power supply plug as far as it will go.

• If the plug is not fully inserted, heat may be generated which could cause ¿ re. If the plug is damaged or the wall socket is loose, they shall not be used.

Do not handle the power supply plug with wet hands.

• Doing so may cause electric shocks.

Do not do anything that may damage the power cable. When disconnecting the power cable, pull on the plug body, not the cable.

• Do not damage the cable, make any modi¿ cations to it, place heavy objects on top of it, heat it, place it near any hot objects, twist it, bend it excessively or pull it. To do so may cause ¿ re and electric shock. If the power cable is damaged, have it repaired at your local Panasonic dealer.

If the Display is not going to be used for any prolonged length of time, unplug the power supply plug from the wall outlet.

To prevent the spread of ¿ re, keep candles or other open À ames away from this product at all times.

If problems occur during use

If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odour starts to come out from the Display, immediately unplug the power supply plug from the wall outlet.

• If you continue to use the Display in this condition, ¿ re or electric shock could result. After checking that the smoke has stopped, contact your local Panasonic dealer so that the necessary repairs can be made. Repairing the Display yourself is extremely dangerous, and shall never be done.

If foreign objects get inside the Display, if the Display is dropped, or if the cabinet becomes damages, disconnect the power supply plug immediately.

A short circuit may occur, which could cause ¿ re. Contact your local Panasonic dealer for any repairs that need to be made.

•

Safety Precautions

CAUTION

When using the LCD Display

Be sure to disconnect all cables before moving the Display.

• If the Display is moved while some of the cables are still connected, the cables may become damaged, and ¿ re or electric shock could result.

Disconnect the power supply plug from the wall socket as a safety precaution before carrying out any cleaning.

• Electric shocks can result if this is not done.

Clean the power cable regularly to prevent it becoming dusty.

• If dust built up on the power cord plug, the resultant humidity can damage the insulation, which could result in ¿ re. Pull the power cord plug out from the wall outlet and wipe the mains lead with a dry cloth.

Do not burn or breakup batteries.

• Batteries must not be exposed to excessive heat such as sunshine, ¿ re or the like.

Power supply

• Install the product near an electrical outlet so that the plug can be unplugged immediately when an abnormality occurs.

• For a wall installation, used a power outlet which can be unplugged immediately when an abnormality occurs.

• This product is energized when the power plug is inserted to a socket. To cut off the power completely, the power plug must be unplugged from the socket.

Cabinet

• Corner part of the metal cabinet is a potential injury hazard.

• To lift the product, hold the handles for the precaution of fall. Injury or damage may be caused.

Cleaning and maintenance

The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth.

• If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water in which neutral detergent has been diluted 100 times, and then wipe it evenly with a dry cloth of the same type until the surface is dry.

• Do not scratch or hit the surface of the panel with ¿ ngernails or other hard objects, otherwise the surface may become damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the surface may be adversely affected.

If the cabinet becomes dirty, wipe it with a soft, dry cloth.

• If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been added and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.

• Do not allow any detergent to come into direct contact with the surface of the Display. If water droplets get inside the unit, operating problems may result.

• Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact with articles made from rubber or PVC.

Safety Precautions

Maintaining air ¿ lters

The cooling structure of the Display is designed to circulate air taken in from outside inside the Display using fans. Air ¿ lters are built into the inlet and outlet. The screen may display “Filter” as you turn on the Display. This means dust is accumulated on air ¿ lters.

Remove and clean the air ¿ lters. Consult your dealer about air ¿ lter replacement when the screen displays “Filter” within a short period after cleaning.

How to remove air ¿ lters

Always unplug the power plug before removing air ¿ lters.

Release the top and bottom catches of the

fan cover to open the fan cover.

Loosen the top and bottom decorative

screws located on the side of the fan cover until they turn freely.

Catches

Fan covers

Decorative screws

Safety Precautions

Pull out the ¿ lter frame laterally.

Filter frame

Fan

Remove air ¿ lters from the ¿ lter frame.

The inlet ¿ lter (accordion type) and the outlet ¿ lter (mesh type) differ in shape.

Filter frame

Cleaning air ¿ lters

Clean foreign matter or dust adhering to air ¿ lters and the outside of them with a vacuum cleaner. In doing so, be

careful not to tear the air ¿ lters.

How to install air ¿ lters

To install air ¿ lters to the Display, reverse procedure to remove the air ¿ lters. In doing so, do not confuse the inlet

and outlet ¿ lters. The confusion may cause failure in the Display due to improper air ¿ lter function.

Air ¿ lter (Inlet ¿ lter: accordion type)

Air ¿ lter (Outlet ¿ lter: mesh type)

Notes:

• Air ¿ lters must be installed before using the Display. The absence of an air ¿ lter may cause failure in the

Display due to the intake of foreign matter or dust.

• When an air ¿ lter is damaged or is unobtrusively soiled even after cleaning, replace the air ¿ lter with a new

one. Contact your sales agent for replacement.

• The amount of foreign matter or dust adhering to air ¿ lters varies depending on the installation location and the

used hours. Increase the frequency of cleaning in locations where dust can easily accumulate.

• Do not touch the fans or wiring inside the Display.

• When removing air ¿ lters from or installing into the Display set on a high place, take care of your own safety,

and avoid the concerned parts falling.

Accessories

Accessories Supply

Check that you have the accessories and items shown

DISPLAY Edition of the operating Instructions (14)

Power supply cord

Main plug types vary between countries. Make sure to use the power supply cord with the voltage and shape appropriate to your country and region. (see page 9)

For TH-47LFT30W

TOUCH PANEL Edition of the operating Instructions (1)

CD-ROM (1) (Operating instructions)

CD-ROM (1) (Driver software)

Remote Control Transmitter N2QAYB000535

Note:

Remote Control Transmitter is not water protection type.

USB cable 3 m (1)

Batteries for the Remote Control Transmitter (R6 (UM3) Size × 2)

Note:

TH-47LFX30W does not have a touch panel built in.

Accessories

Remote Control Batteries

Requires two R6 batteries.

1. Pull and hold the hook, then open the battery cover.

2. Insert batteries - note correct polarity ( + and -).

“R6 (UM3)” size

Helpful Hint:

For frequent remote control users, replace old batteries with Alkaline batteries for longer life.

Precaution on battery use

Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter. Disposal of batteries should be in an environment-friendly manner.

Observe the following precaution:

1. Batteries shall always be replaced as a pair. Always use new batteries when replacing the old set.

2. Do not combine a used battery with a new one.

3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).

4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries. Battery replacement is necessary when remote control acts sporadically or stops operating the Display set.

6. Do not burn or breakup batteries.

Batteries must not be exposed to excessive heat such as sunshine, ¿ re or the like.

3. Replace the cover.

Accessories

About Power Supply Cord

Main plug types vary between countries. Check the shape of the power plugs to choose the appropriate cable for you.

Asia

Country Name Appropriate AC Cables

India Indonesia Philippine Malaysia Singapore Hong Kong

Middle East

United Arab Emirates Iraq Iran Oman Syria Lebanon Qatar Kuwait Saudi Arabia

Africa

Egypt

South Africa

Middle/South America

Uruguay Ecuador Colombia Chili Panama Paraguay Puerto Rico Venezuela Peru Bolivia Honduras

North America

USA Canada

Europe

Italy Austria Netherlands Greece Switzerland Sweden Spain Czech Denmark Germany Norway Hungary Finland France Bulgaria Belgium Portugal Poland Monaco Luxembourg Russia Kazakhstan Ukraine Belarus UK Cable C

Oceania

Australia New Zealand

Cable B or Cable C

Cable C

Cable B or Cable C

Cable C

Cable B or Cable CEthiopia

Cable A or Cable B

Caution:

110-127 V AC: Cable A is adaptable 220-240 V AC: Cable B is adaptable

Cable A (110-127 V AC Compatible)

Cable B

Cable D

Cable A

Plug Type : A

Cable B

Plug Type : SE

16A 250V~

Cable C

Plug Type : BF

Cable D

Plug Type : O

10A 250V~

Insulating sleeve

Note:

Depending on the country of destination, relay type or direct attached type of the power supply cord is used.

+ 37 hidden pages