Panasonic TC-P46G15 User Manual

Operating Instructions

42”/46”/50” Class 1080p Plasma HDTV

(41.6/46.0/49.9 inches measured diagonally)

Manual de instrucciones

Televisión de alta definición de 1080p y clase 42”/46”/50” de Plasma

(41,6/46,0/49,9 pulgadas medidas diagonalmente)

Model No.

Número de modelo

TC-P42G15 TC-P46G15 TC-P50G15

Quick Start Guide

(See page 8-18)

Guía de inicio rápido

(vea la página 8-18)

For assistance (U.S.A./Puerto Rico), please call: 1-877-95-VIERA (958-4372) or visit us at www.panasonic.com/contactinfo

For assistance (Canada), please call:

1-866-330-0014

or visit us at www.vieraconcierge.ca

Para solicitar ayuda (EE.UU./Puerto Rico), llame al:

1-877-95-VIERA (958-4372)

ó visítenos en www.panasonic.com/contactinfo

English

Please read these instructions before operating your set and retain them for future reference. The images shown in this manual are for illustrative purposes only.

Español

Lea estas instrucciones antes de utilizar su televisor y guárdelas para consultarlas en el futuro. Las imágenes mostradas en este manual tienen solamente fines ilustrativos.

TQB2AA0823-1

Turn your own living room into a movie theater!

Experience an amazing level of multimedia excitement

VIERA Link™ is a trademark of Panasonic

HDMI, the HDMI logo and High-Definition Multimedia Interface

are trademarks or registered trademarks of HDMI Licensing

Corporation.

LLC.

VIERA CAST™ is a trademark of

Panasonic Corporation.

Manufactured under license from Dolby Laboratories.

SDHC Logo is a trademark.

Dolby and the double-D symbol are

trademarks of Dolby Laboratories.

Enjoy rich multimedia

Contents

Please read before using the unit

Safety Precautions ·······································4 Notes ···························································· 7

Amplifier Home theater system

VCR

DVD recorder/

Blu-ray Disc recorder

Set T op Box

SD memory card

Camcorder

Personal

computer

DVD player/

Blu-ray Disc player

Quick Start Guide

Accessories/Optional Accessory ····· 8 Basic Connection ····························1 1 Identifying Controls ························15 First Time Setup·····························16

Enjoy your TV!

Basic Features

Watching TV ···············································19 Using VIERA TOOLS ································· 21 Viewing from an SD Card ··························22 Watching Videos and DVDs ·······················26 VIERA CASTTM ···········································28 Network Camera ········································ 30 Displaying PC Screen on TV ·····················32

Advanced Features

How to Use Menu Functions

(picture, sound quality, etc.) ·······················34 VIERA LinkTM “HDAVI ControlTM” ················38 Network setting ·········································· 44 VIERA CAST setting ··································46 Lock ··························································· 48 Editing and Setting Channels·····················50 Closed Caption ·········································· 52 Input Labels/Audio Out ······························53 Using Timer ················································ 54 Recommended AV Connections ················ 55

Quick Start

Guide

Viewing Advanced FAQs, etc.

This product qualifies for ENERGY STAR in the “Home Use” setting and this is the setting in which energy savings will be achieved. Any modifications to the “Home Use” setting or other factory default settings could result in greater energy consumption beyond levels that meet ENERGY STAR qualifications.

HDAVI Control™ is a

trademark of Panasonic

Corporation.

FAQs, etc.

Ratings List for Lock ··································56 Technical Information ·································57 Care and Cleaning ·····································61 FAQ ···························································· 62 Specifications ············································· 64 Limited Warranty

(for U.S.A. and Puerto Rico only)···············65 Customer Services Directory

(for U.S.A. and Puerto Rico) ······················66 Limited Warranty (for Canada) ···················67

Safety Precautions

The lightning flash with

CAUTION

RISK OF ELECTRIC SHOCK

WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Do not place liquid containers (flower vase, cups, cosmetics, etc.) above the set (including on shelves above, etc.).

DO NOT OPEN

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments / accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15) To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Caution: To assure continued compliance, follow the attached installation instructions and use only shielded interface cables when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by Panasonic Corp. of North America could void the user’s authority to operate this device.

FCC Declaration of Conformity

Model No. TC-P42G15, TC-P46G15, TC-P50G15

Responsible Party: Panasonic Corporation of North America Contact Source: Panasonic Consumer Electronics Company email: consumerproducts@panasonic.com

CANADIAN NOTICE:

For Model TC-P42G15, TC-P46G15, TC-P50G15 This Class B digital apparatus complies with Canadian ICES-003.

One Panasonic Way, Secaucus, NJ 07094 1-877-95-VIERA (958-4372)

arrowhead within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.

The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance.

WARNING/CAUTION

WARNING

Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from being played with by young children, creating the potential risk of suffocation.

Set up

This Plasma TV may fall and can cause personal injury or

even death if not installed correctly. To prevent personal injury or death, follow these warnings:

Install the Plasma TV in accordance with the

manufacturer’s recommended pedestal or stand, corresponding hardware and installation instructions.

This Plasma TV is for use only with the following optional

accessories. Use with any other type of optional accessories may cause instability. The following accessories are manufactured by Panasonic Corporation.

• Wall-hanging bracket (Angled) TY-WK4P1RW

Be sure to ask a qualified technician to carry out the

installation and set-up.

Two or more people are required to install or remove the

television.

Some wall mounts (wall-hanging brackets) are not

designed to be mounted to walls with steel studs or old cinder block constructions.

Ask your dealer or licensed contractor to properly secure the

wall-hanging bracket.

Do not place the Plasma TV or its stand on a sloped or

unstable surface.

The Plasma TV may fall or tip over.

Do not support the Plasma TV on a non-specified

pedestal.

Do not place the Plasma TV on furniture that can easily

be used as steps, such as a chest of drawers. Do not climb or allow children to climb on the Plasma TV Place or install the Plasma TV where it cannot be pushed,

pulled over or knocked down. Route all cords and cables such that they cannot be

tripped over or pulled by curious children. Do not place any objects on top of the Plasma TV.

If water spills onto the Plasma TV or foreign objects get

inside it, a short-circuit may occur which could result in fire

or electric shock. If any foreign objects get inside the Plasma

TV, please consult an Authorized Service Center.

AC Power Supply Cord

To prevent fire or electric shock:

The Plasma TV is designed to operate on a 120 V AC,

60 Hz service. Insert the power cord plug as far as it will

go into the wall socket.

If the plug is not fully inserted, heat may generate, which

could cause a fire.

The included power cord is for use with this unit only. Do not use any power cord other than that provided with

this TV. Do not handle the power cord plug with wet hands. Do not do anything that might damage the power supply

cord.

When disconnecting the power supply cord, hold the

plug, not the cord.

Do not use the power supply cord if the plug or cord is

damaged.

Replace the cord or contact your Authorized Service Center

Handling the power supply cord

Insert the power plug fully into the socket outlet. (If the

power plug is loose, it could generate heat and cause fire.) Ensure that the power plug is easily accessible. Ensure the earth pin on the power plug is securely

connected to prevent electrical shock.

•

An apparatus with CLASS I construction shall be connected to a power socket outlet with a protective earthing connection.

Do not touch the power plug with a wet hand. (This may

cause electrical shock.) Do not use any power cord other than that provided with

this TV. (This may cause fire or electrical shock.) Do not damage the power cord. (A damaged cord may

cause fire or electrical shock.)

•

Do not move the TV with the cord plugged in the socket outlet.

• Do not place a heavy object on the cord or place the cord near a high-temperature object.

• Do not twist the cord, bend it excessively, or stretch it.

• Do not pull on the cord. Hold onto the power plug body when disconnecting cord.

• Do not use a damaged power plug or socket outlet.

If Problems Occur During Use

If a problem occurs (such as no picture or no sound),

or if smoke or an abnormal odor is detected from the Plasma TV, unplug the power supply cord immediately.

Continued use of the TV under these conditions might cause

a fire or permanent damage to the TV. Have the TV evaluated by an Authorized Service Center. Servicing of the TV by unauthorized personnel is strongly discouraged due to its high voltage.

If water or an object gets inside the Plasma TV, if the

Plasma TV is dropped, or if the enclosure becomes damaged, unplug the power supply cord immediately.

A short-circuit may occur, which could cause a fire. Contact

an Authorized Service Center for an evaluation.

CAUTION

Do not cover the ventilation holes.

Doing so may cause the Plasma TV to overheat, which can

cause a fire or damage to the Plasma TV.

Leave a space of 3 15/16” (10 cm) or more at the top, left

and right, and 2 3/4” (7 cm) or more at the rear.

When using the pedestal, keep the space between the

bottom of the TV and the pedestal or stand surface clear from objects that may obstruct ventilation.

When Moving the Plasma TV

Be sure to disconnect all cables before moving the

Plasma TV.

Moving the TV with its cables attached might damage the

cables which, in turn, can cause fire or electric shock

To prevent an electric shock, disconnect the power

plug from the wall outlet as a safety precaution before carrying out any cleaning.

Safety Precautions (Continued)

Transport only in upright position

Transporting the unit with its display panel facing upright or

downward may cause damage to the internal circuitry.

Using a dry cloth, clean any dust from the power supply

cord and plug regularly.

Build-up of dust on the power cord plug can increase

humidity, which might damage the insulation and cause a fire.

This Plasma TV radiates infrared rays;

therefore, it may affect other infrared communication

equipment. Install your infrared sensor in a place away from direct or reflected light from your Plasma TV.

The TV will still consume some power as long as the power supply cord is connected to the wall outlet.

Display panel is made of glass. Do not apply strong force

or impact to the display panel.

This may cause damage resulting in injury.

The TV is heavy. TV should be handled by 2 or more

people. Support as shown to avoid injury by the TV tipping or falling.

CEA CHILD SAFETY NOTICES: Flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations. Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and may cause personal injury or even death.

The consumer electronics industry (of which Panasonic is a member) is committed to making home entertainment enjoyable and safe. To prevent personal injury or death, be sure to follow the following safety guidelines:

TUNE INTO SAFETY:

• One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of your flat panel display.

• Carefully read and understand all enclosed instructions for proper use of this product.

• Don’t allow children to climb on or play with furniture and television sets.

• Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.

• Remember that children can become excited while watching a program, especially on “larger than life”

flat panel displays. Care should be taken to install the display where it cannot be pushed, pulled over, or knocked down.

• Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be pulled or grabbed by curious children.

WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:

• Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory (such as UL, CSA, ETL).

• Follow all instructions supplied by the display and wall mount manufacturers.

• If you have any doubts about your ability to safely install your flat panel display, contact your retailer

about professional installation.

• Make sure the wall where you are mounting the display is appropriate. Some wall mounts are not designed to be mounted to walls with steel studs or old cinder block construction. If you are unsure, contact a professional installer.

• A minimum of two people are required for installation. Flat panel displays can be heavy.

Panasonic recommends that a qualified installer perform the wall-mount installation. See page 5.

Notes

Do not display a still picture for a long time

This causes the image to remain on the plasma screen (“Image retention”). This is not considered a malfunction and is not covered by the warranty.

4 : 3

Typical still images

Channel number and other logos

•

Image displayed in 4:3 mode

•

SD Card photo • Video game • Computer image

•

Set up

■

Do not place the unit where it’s exposed to sunlight or other bright light (including reflections). Use of some types of fluorescent lighting may reduce the remote control’s transmission range.

To prevent “Image retention”, the screen saver is automatically activated after a few minutes if no signals are sent or no operations are performed. (p. 63)

Accessories/Optional Accessory

Accessories

Check you have all the items shown.

Accessories

Remote Control Transmitter

N2QAYB000322

AC cord Pedestal

Operating Instructions Viera Concierge and basic

instruction for HDTV

Batteries for the Remote Control Transmitter (2)

AA Battery

TBLX0091

(TC-P42G15)

TBLX0092

(TC-P46G15, TC-P50G15)

Optional Accessory

Note

In order to maintain the TV’s performance and safety, be absolutely sure

to ask your dealer or a licensed contractor to secure the wall-hanging brackets.

Carefully read the instructions accompanying the plasma TV stand or

pedestal, and be absolutely sure to take steps to prevent the TV from tipping over.

Handle the TV carefully during installation since subjecting it to impact

Wall-hanging bracket

(angle)

TY-WK4P1RW

or other forces may cause its panel to crack.

Cleaning cloth

How to assemble (p. 9)

Product Registration Card (U.S.A.) Customer Care Plan Card (U.S.A.)

Installing the remote’s batteries

Caution

Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.

Do not mix old and new batteries.

•

Do not mix different battery types

•

(such as alkaline and manganese batteries). Do not use rechargeable (Ni-Cd)

•

batteries.

Do not burn or break batteries.

Hook

Pull open

Note the correct polarity (+ or -).

Attaching the pedestal to TV

Assembling the pedestal

■

Fix securely with assembly screws A. (Total 4 screws) Tighten screws firmly.

Pole

Front

Base

Set-up

■

Carry out work on a horizontal and level surface.

Tighten screws firmly.

Bottom view

Rear side

Accessories

Assembly screws (4 of each)

M5 × 18 (Silver)

M5 × 25 (Black)

Poles (2)

L or R is printed at the

bottom of the poles.

Base (1)

Quick Start

Guide

Accessories/Optional Accessory

Arrow mark

Hole for pedestal installation

Pole

Base

Warning

Do not disassemble or modify the pedestal.

Otherwise the TV may fall over and become damaged, and personal injury may result.

Caution

Do not use any other TV and displays.

Otherwise the TV may fall over and become damaged, and personal injury may result.

Do not use the pedestal if it becomes warped or physically damaged.

If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic

Dealer immediately.

During set-up, make sure that all screws are securely tightened.

If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be

strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.

Fix securely with assembly

screws B. (Total 4 screws)

Accessories/Optional Accessory

AC cord connection

To attach To remove

Insert it firmly until the tabs on both sides click into place.

(Continued)

Keep pushing both side snaps and pull down

Reference of connection

Antenna terminal Pin terminals HDMI terminal

greenbluered

green

Firmly tighten by hand.

Match colors of plugs and terminals. Insert firmly.

Insert firmly.

To connect the antenna terminal and Cable Box

COMPONENT

VIDEO

HDMI 1 HDMI 2

HDMI 1

HDMI 2

Basic Connection

Example 1

Cable TV

Connecting Antenna (To watch TV)

VHF/UHF Antenna

Cable TV

VHF/UHF Antenna

NTSC (National Television System Committee):

•

Conventional broadcasting ATSC (Advanced Television Systems Committee):

•

Digital TV Standards include digital high-definition television

(HDTV), standard-definition television (SDTV), data broadcasting, multi-channel surround-sound audio and interactive television.

Back of the TV

* See page 10

(AC cord connection)

AC 120 V

60 Hz

AC Cord (Connect after all the other connections have been made.)

Quick Start

Guide

Basic Connection (Antenna + TV)

Accessories/Optional Accessory

(If no Cable Box) or

Cable Box/Cable

ANT OUTANT IN

Note

Not all cables and external equipment shown in this book are supplied with the TV. For more details on the external equipment’s connections, please refer to the operating manuals for the equipment. When disconnecting the power cord, be absolutely sure to disconnect the power cord plug from the wall outlet first. For additional assistance, visit us at: www.panasonic.com

Cable Box

You need to subscribe to a cable TV service to enjoy viewing their

•

programming. If using a Cable Box, set the TV channel to CH3 or CH4 for regular cable.

•

You can enjoy high-definition programming by subscribing to a high-

•

definition cable Service. The connection for high-definition can be done with the use of HDMI or Component Video cable. (p. 14) To view high-definition programming select the correct video input. (p. 26)

•

www.panasonic.ca

To connect the antenna terminal and DVD recorder or VCR

COMPONENT

VIDEO

AUDIO

PRP

TO AUDIO AMP

HDMI 1 HDMI 2

AUDIO

OUT

LAN

VIDEO

AUDIO

OUT

Basic Connection (Continued)

Example 2

Connecting DVD recorder (VCR) (To record/playback)

AV Equipment (e.g. DVD Recorder or VCR)

VHF/UHF Antenna

DVD Recorder

If the source has a higher resolution signal (480p/720p/ 1080i/1080p), connection can be made with the use of a Component Video or HDMI cable. (p. 14)

VCR

Connection can be made with the use of an RF cable and Composite Video/S Video cable. (p. 14)

VHF/UHF Antenna

AC Cord

Back of the TV

* See page 10

(AC cord connection)

AC 120 V

60 Hz

ANT OUTANT IN

AV Equipment

(e.g. DVD Recorder or VCR)

(with TV tuner)

Connecting TV and AV equipment

Please refer to

- D on p. 14

To connect the antenna terminal and Satellite Receiver and DVD recorder or VCR

COMPONENT

VIDEO

AUDIO

PRP

TO AUDIO AMP

HDMI 1 HDMI 2

AUDIO

OUT

LAN

VIDEO

AUDIO

PRP

AUDIO

OUT

Example 3

Connecting DVD recorder (VCR) and satellite receiver

DVD Recorder

VCR

Satellite

Receiver

VHF/UHF Antenna

You can enjoy high-definition programming by subscribing to high-definition satellite service. Connection can be done with the use of HDMI or Component Video cable. (p. 14)

Quick Start

Guide

VHF/UHF Antenna

AC 120 V

60 Hz

AC Cord

Back of the TV

* See page 10

(AC cord connection)

Basic Connection (TV + DVD Recorder or VCR + Satellite Receiver)

(TV + DVD Recorder or VCR)

ANT IN

Satellite Receiver DVD Recorder or VCR

Note

For details of external equipment connections, please refer to the operating manuals for the equipment.

ANT OUTANT IN

(with TV tuner)

Connecting TV and AV equipment

Please refer to

- D on p. 14.

High-Definition

Standard-Definition

Basic Connection (Continued)

COMPONENT

VIDEOAUDIO

PRP

VIDEO

AUDIO

VIDEO

PRP

VIDEO

PRP

VIDEO

AV cable connections

To use HDMI terminals

HDMI 1 HDMI 2

Connecting to HDMI terminals will enable you to enjoy high-definition digital images and high-quality sound. The HDMI connection is required for a 1080p signal.

For “VIERA LinkTM connections”, please refer to p. 39.

To use COMPONENT terminals

white

red

green

blue

red

blue

red

Recorders may also be connected to COMPOSITE or S VIDEO terminals. (see below)

white

red

green

blue

red

HDMI AV OUT

AUDIO OUT

COMPONENT VIDEO OUT

AV Equipment

e.g. Blu-ray Disc player

AV Equipment

e.g. Blu-ray Disc player

To use S VIDEO terminals

To use COMPOSITE terminals

The S Video input will override the composite video signal when S Video cable is connected. Connect

either S Video or Video cable.

Connecting to S VIDEO terminals will enable you to enjoy greater picture quality than using Composite

terminals.

Note

Some programs contain a copyright protection signal to prevent recording.

When the copyright protection program is displayed, do not connect the other TV monitor through a VCR. Video signals fed

through VCRs may be affected by copyright protection systems and the picture will be distorted on the other TV monitor.

For more details on the external equipment’s connections, please refer to the operating manuals for the equipment.

white

red

yellow

white

red

white

red

yellow

white

red

white

red

yellow

white

red

S VIDEO OUT

AUDIO

OUT

COMPOSITE OUT

AV Equipment

e.g. DVD Recorder

e.g. VCR

AV Equipment

e.g. DVD Recorder

e.g. VCR

Identifying Controls

TV controls/indicators

Front of the TV

Selects channels in sequence

Volume up/down

POWER button

Note

The TV consumes a limited amount of power as long as the power cord is inserted into the wall outlet. Do not place any objects between the TV remote control sensor and remote control.

Remote control sensor Within about 23 feet (7 meters) in front of the TV set.

Power indicator (on: red, off: no light)

C.A.T.S. sensor Plasma C.A.T.S. (Contrast Automatic Tracking System). (p. 34)

Displays the Main menu.

Changes the input mode Chooses menu and submenu entries.

Remote control

Back of the TV

HDMI input 3 connector

PC connector

Video Input 2 connector

SD card slot

Quick Start

Guide

Identifying Controls

Basic Connection (AV cable connections)

Switches TV On or Off (Standby) Viewing from SD Card (p. 22-25) Lights the CH and VOL buttons

for 5 seconds. Press again to turn off the CH and VOL button lights.

Changes the input mode (p. 26) Switches to input terminal

that has “GAME” label. (p. 26) VIERA Link menu (p. 42-43) Displays Sub Menu (p. 19, 36) Colored buttons

(used for various functions) (for example, p. 18, 22, 42)

Volume up/down Sound mute On/Off Changes aspect ratio (p. 20, 57)

Switches to previously viewed channel or input modes.

External equipment operations (p. 43)

Closed caption On/Off (p. 19) Selects Audio Mode for TV viewing (p. 19) Exits from menu screen

Displays Main Menu (p. 34) Displays VIERA CAST screen (Home

screen) (p. 28) Displays VIERA TOOLS (p. 21) Selects/OK/Change Returns to previous menu Channel up/down Displays or removes the channel

banner (p. 20) Operates the Favorite channel list

function. (p. 20) Numeric keypad to select any channel

(p. 19) or press to enter alphanumeric input in menus. (p. 18, 26, 30, 42, 44, 46, 48, 50, 53, 54)

Use for digital channels. (p. 19)

First Time Setup

“First time setup” is displayed only when the TV is turned on for the first time after the power cord is inserted into a wall outlet and when “Auto power on” (p. 36-37) is set to “No”.

Turn the TV On with the POWER button

(Remote)(TV)

* This setting will be skipped next time if you select “Home Use”.

Select your language

Language

English FrançaisEspañol

select

Be sure to select “Home Use”

Please select your viewing environment

Home Use Store Demonstration

Select “Home Use” when using this TV in your home.

Please confirm your selection (Home Use) before pressing OK button.

If you select “Store Demonstration” by mistake in ,

■

select

confirmation screen will be displayed.

You are selecting the mode for store demonstration

Yes No

If you select “Yes”, the picture mode will regularly reset to “Vivid” and a Picture Refresh message will be displayed on the screen.

Select “No” and return to previous screen . If you select “Yes”, Screen enters store demonstration mode.

To display the “Please select your viewing environment” screen again as shown above and select “Home Use”, do one of the following:

• Press and hold down the front POWER button.

• Unplug the TV and plug it again.

select

Press to exit from

■

a menu screen

Press to return

■

to the previous screen

Auto channel setup

Select “ANT/Cable setup”

First time setup

Language

ANT/Cable setup

Network setting VIERA CAST setting Clock Input labels

Select “ANT in”

ANT/Cable setup

ANT in

Auto program

Select “Not used” when no wire is connected to the “Antenna/Cable” terminal.

Typical when Cable/Satellite box is connected to a TV input. Prevents accidental tuning to an unavailable signal.

Cable

select

set

select

ANT in

Cable: Cable TV Antenna

: Antenna

Not used

: Skip TV tuning

go to

Select “Auto program”

ANT/Cable setup

ANT in

Auto program

Cable

select

Select scanning mode (ALL channels/Analog only/Digital only)

Auto program

All channels

Analog only Digital only

Auto program

Progress

Number of analog channels Number of digital channels

Press RETURN to quit.

RETURN

Start scanning the channels

Available channels (analog/digital) are automatically set.

All channels: Scans digital and analog channels Analog only: Scans Analog channels only Digital only: Scans Digital channels only

select

Quick Start

Guide

Press to exit from

■

a menu screen

Note

To change setting

(Language/ ANT/Cable setup/ Network setting/ VIERA CAST setting/ Clock/Input labels) later, go to Menu screen (p. 36)

Confirm registered channels

program

Caption Favorite Add

... ... ...

CancelApply

...

Yes

...

Yes

...

Yes

If OK is not pressed after selecting “Apply”, the channels will not be saved.

The channel will be saved when no operation is performed for 60 seconds and

the “Manual program” menu will also exit automatically.

If you perform scanning more than twice, previously saved channels are erased.

select “Apply”

Network setting

First time setup

Language ANT/Cable setup

Network setting

VIERA CAST setting Clock Input labels

Network setting (p. 44-45)

select

VIERA CAST setting

First time setup

Language ANT/Cable setup Network setting

VIERA CAST setting

Clock Input labels

VIERA CAST setting (p. 46-47)

select

First Time Setup

First Time Setup (Continued)

GAME

Select

OK RETURN

DeleteABC → abc

G Y

Video 2

G A A

Adjust the clock

First time setup

Language ANT/Cable setup Network setting VIERA CAST setting

Clock

Input labels

Manual setting

Clock

Mode

Year Month Day Hour Minute Time zone DST

Auto setting

Clock

2009/ 6/11 8:07AM

Mode

Year

Timezone DST

Manual

2009

1 7

10 AM

NST

Off

Auto

2009

Est On

select

set select

item

Mode

Manual: Adjust the clock manually Auto:

Year

Month

Day

Hour

Minute

Time zone

DST

On:

(Year/Month/Day/Hour/Minute)

The clock is adjusted automatically via Internet service. Only available when the TV is on a network.

Set “Network setting” and

“VIERA CAST setting” first.

(Time zone/DST)

Select the year Select the month Select the day Adjust the hour Adjust the minute

Select your time zone.

(EST/CST/MST/PST/AKST/ HST/NST/AST)

Set DST (Daylight Saving Time) setting. (On/Off)

Advances the clock one hour from the time is set according to the time zone.

Press to exit from

■

a menu screen

Note

About broadcasting

systems

Analog (NTSC): Conventional

broadcasting

Digital (ATSC): New

programming that allows you to view more channels featuring high-quality video and sound

Set the Input labels

First time setup

Language ANT/Cable setup Network setting VIERA CAST setting Clock

Input labels

Component 1 Component 2 HDMI 1 HDMI 2 HDMI 3 Video 1 Video 2

GAME

Label: [BLANK] SKIP/VCR/DVD/CABLE/SATELLITE/DVR/GAME/AUX/RECEIVER/

COMPUTER/Blu-ray/CAMERA/DVD REC/HOME THTR/MONITOR/MEDIA CTR/MEDIA EXT/OTHER

select

select set

Switches Input mode alphabet to numeric

Watching TV

Listen with SAP (Secondary Audio Program)

■

Select Audio Mode for watching TV

Digital mode

Press SAP to select the next audio track (if available) when receiving a digital

channel.

Analog mode

Press SAP to select the desired audio mode.

• Each press of SAP will change the audio mode. (Stereo/SAP/Mono)

Closed caption

■

Switches Closed caption mode On or Off

Closed caption On Closed caption Off

Display the SUB MENU

■

Press SUB MENU to show sub menu screen. (p. 36)

This menu consists of shortcuts to convenient functions.

All

Setup SUB MENU

Edit CH caption Signal meter

Set favorite

Channel surf mode

Connect the TV to a cable box/cable, set-top-box, satellite box or antenna cable (p. 11-14)

To watch TV and other functions

Turn power on

Note

If the mode is not TV, press and

select TV. (p. 26)

Select a channel number

down

(TV)

Note

Reselect “Cable” or “Antenna” in “ANT in” of “ANT/Cable setup” to switch the

signal reception between cable TV and antenna. (p. 16, 51)

The channel number and volume level remain the same even after the TV is

turned off.

Audio track 1 of 2

(English)

(TV)

Quick Start

Guide

To directly input the digital

■

channel number

When tuning to a digital channel, press the button to enter the minor number in a compound channel number.

example: CH15-1:

Viewing

Watching TV

First Time Setup

SUB

Information Recall

■

Displays or removes the channel banner.

Channel

Station identifier

SAP indication

Signal resolution

Rating Level

Picture mode

Sleep timer remaining time

Aspect ratio

Closed caption

Clock

Change aspect ratio

■

Press FORMAT to cycle through the aspect modes. (p. 57)

• 480i, 480p: FULL/JUST/4:3/ZOOM

• 1080p, 1080i, 720p: FULL/H-FILL/JUST/4:3/ZOOM

Call up a favorite channel

■

FAVORITE

Channel numbers registered in Favorite are displayed on the favorite tune

screen. Select the desired broadcast station with the cursor or use number buttons. (see below)

Set favorite 1/3

26-1

1 2 3 4 5

Set favorite 1/3

26-1

1 2 3 4 5

Favorite channels

1/3

26-1

1 2 3 4 5

Favorite channels

1/3

26-1

1 2 3 4 5

Watching TV (Continued)

Other Useful Functions (Operate after )

■

Set Favorite Feature

■

Display the SUB MENU.

SUB

Select “Set favorite”

Setup SUB MENU

Channel surf mode

All

Set favorite

Edit CH caption Signal meter

Set the displayed channel

Delete a favorite channel

15-2 12:30 PM ABC-HD

select the list number (to save the channel without pressing OK)

THE NEWS CC SAP

TV-G 1080i Standard 4:3

Favorite Feature

Use Favorite Feature

■

Display “Favorite channels”

Select the channel

select

Set Favorite channel

select the list number

save the displayed channel

select

■

To change the page

select

Press repeatedly to change between pages(1/3, 2/3, 3/3 or exit)

Changes the page forward/backward

delete (while holding down)

Using VIERA TOOLS

VIERA TOOLS is the easy way to access high use menu items. They are displayed as shortcut icons on the TV screen.

Unlike a conventional menu, you can enjoy using, playing or setting a function quickly.

Display VIERA TOOLS

Select the item

select

Displayed “THX setting” menu. (P.59) Select Picture mode setting. (THX/Standard (Vivid/Game/Custom))

Start “VIERA CAST”. (p. 28)

Viewing

Press to exit from

■

a menu screen

Press to return

■

to the previous screen

Displayed “VIERA Link control” menu. Select the equipment you want to access.

VIERA Link control only with the TV's remote control

(p. 42-43) Start Network Camera viewing (p. 30-31) Displayed “SD card” menu.

Select SD card function. (Slideshow/Thumbnail/Movie)

Viewing from an SD card (p. 22-25)

Displayed “ECO/energy saving” menu. (p. 36)

Using VIERA TOOLS

Watching TV

+ 48 hidden pages