Panasonic SX-PR54M User Manual

DIGITAL ENSEMBLE

SX-PR54/M

Operating Instructions

Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference.

This manual was printed with soy based ink.

QQTG0701 ENGLISH

Caution for AC Mains Lead

(For United Kingdom) (For the type as shown in figures A and B)

For your safety, please read the following text carefully.

This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark or the BSI mark

on the body of the fuse.

If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local dealer.

WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E, BY THE EARTH

SYMBOL OR COLOURED GREEN OR GREEN/ YELLOW.

THIS PLUG IS NOT WATERPROOF —KEEP DRY.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug.

Open the fuse cover with a screwdriver.

Figure A Figure B

Fuse cover

CAUTION!

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE SOCKET.

If a new plug is to be fitted please observe the wiring code as stated below. If in any doubt please consult a qualified electrician.

IMPORTANT

The wires in this mains lead are coloured in accordance with the following code: Blue: Neutral, Brown: Live. As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black or Blue. The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Brown or Red.

Replace the fuse and close or attach the fuse

cover.

Figure A Figure B

Fuse (5 ampere)

For United Kingdom and Republic of Ireland

www.panasonic.co.uk (for UK customers only)

•

Order accessory and consumable items for your product with ease and confidence by telephoning our Customer Care Centre Mon–Friday 9:00am–5:30pm. (Excluding public holidays.)

• Or go on line through our Internet Accessory ordering application.

• Most major credit and debit cards accepted.

• All enquiries transactions and distribution facilities are provided directly by Panasonic UK Ltd.

• It couldn’t be simpler!

Customer Care Centre For UK customers: 08705 357357 For Republic of

Ireland customers: 01 289 8333 Technical Support

For UK customers: 0870 1 505610

This Technical Support Hot Line number is for Panasonic PC software related products only.

For Republic of Ireland, please use the Customer Care Centre number listed above for all enquiries.

For all other product related enquiries, please use the Customer Care Centre numbers listed above.

QQTG0701

THE FOLLOWING APPLIES ONLY

IN THE U.S.A. AND CANADA

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

(for U.S.A. and Canada)

CAUTION:

TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

THE FOLLOWING APPLIES

ONLY IN THE U.S.A.

CAUTION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Warning:

To assure continued FCC emission limit compliance, use only the provided power supply cord and the shielded interface cable when connecting this device to the computer. Also, any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Responsible Party:

Matshshita Electric Corporation of America One Panasonic Way Secaucus, NJ, 07094 USA Telephone No.: 1-800-211-7262

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

Notice:

This product has a fluorescent lamp that contains a small amount of mercury. It also contains lead in some components. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance: <http://www.eiae.org>

The model number and serial number are found underneath the keyboard. Please note the model and serial numbers in the space provided below and retain this sheet as a permanent record of your purchase to aid identification in the event of theft.

MODEL NUMBER

SERIAL NUMBER

THIS UNIT IS INTENDED FOR USE IN TROPICAL CLIMATES. DENNA ENHET ÄR AVSEDD FÖR ANVÄNDNING PÅ PLATSER MED TROPISKT KLIMAT. TÄMÄ LAITE ON TARKOITETTU KÄYTETTÄVÄKSI TROOPPISESSA ILMASTOSSA. DETTE APPARATET ER BEREGNET TIL BRUK UNDER TROPISKE KLIMAFORHOLD.

QQTG0701

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

Safety

Installation

Placement

Environment

Maintenance

Service

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the safety precautions listed below. Keep these operating instructions handy for future reference.

Carts and stands—Use the unit only

Power Source—Connect the unit to a power

source of the type described in these instructions or as marked on the unit.

Polarization—The unit is equipped with a polarized

power plug where one blade is wider than the other. This safety feature ensures that the plug fits into your household AC outlet only one way. If the plug doesn’t fit one way, try reversing it. If the plug still doesn’t fit, contact an electrician to replace the obsolete outlet. Do not attempt to defeat the safety purpose of the plug.

Power Cord protection—Route the AC power sup-

ply cord so that it will not be walked on or pinched by items placed on or against it. Never take hold of the plug or cord with wet hands. Always grasp the plug body firmly when connecting and disconnecting it.

Overloading—When connecting the AC power

supply cord, be careful not to overload the household AC outlet, extension cord, or outlet from any other device as this can result in fire or electric shock.

Nonuse periods—Turn the unit off when it is not in

use. Unplug the unit from the household AC outlet if it is not to be used for a long time. Unplug the unit during lightning storms.

Attachments and accessories—Use only the

attachments and accessories recommended in these operating instructions.

Ventilation—Situate the unit so that it receives

proper ventilation. Do not install in a confined space such as a bookcase or cabinet. Allow at least 10 cm (4 inches) clearance from the rear of the unit. To prevent the risk of electric shock or fire due to overheating ensure curtains and other materials do not obstruct the unit’s ventilation.

Foreign material—Ensure objects and liquids do

not get into the unit. Avoid exposing the unit to excessive smoke, dust, mechanical vibration, and shock.

Magnetism—Situate the unit away from equipment

and devices that generate strong magnetic fields.

Stacking—Do not place heavy objects on top of

this unit.

Surface—Place the unit on a flat, level surface.

with carts and stands recommended by the manufacturer. Move carts with care. Sudden stops, excessive force, and uneven surfaces can cause carts to overturn.

Wall and ceiling mounting—Do not mount the unit

on walls or ceilings unless specified in the instructions.

Water and moisture—Do not use the unit near

water, such as near a bathtub or swimming pool. Avoid damp basements.

Heat—Situate the unit away from heat sources,

such as radiators. Do not situate where temperatures fall below 5°C (41°F) or rise above 35°C (95°F).

(See page 7 for details.)

Unplug the unit from the household AC outlet before cleaning. Clean with a damp cloth. Do not use abrasive pads, scouring powders, or solvents.

Damage Requiring Service—The unit should be

serviced by qualified service personnel if: (a) The AC power supply cord or the plug has been

damaged; or (b) Objects or liquids have gotten into the unit; or (c) The unit has been exposed to rain; or (d) The unit does not operate normally or exhibits a

marked change in performance; or (e) The unit has been dropped or the cabinet dam-

aged.

Servicing—Do not attempt to service the unit

beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel.

Replacement parts—When parts need replacing

ensure the servicer uses parts specified by the manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.

Safety check—After repairs or service, ask the ser-

vicer to perform safety checks to confirm that the unit is in proper working condition.

QQTG0701

Cautions for safest use of this unit

Installation location

A well-ventilated place.

Take care not to use this unit in a place where it will not receive sufficient ventilation, and not to permit the ventilation holes to be covered by curtains, or any similar materials.

Place away from direct sunlight and excessive

heat from heating equipment. A place where humidity, vibration and dust are

minimized.

Power source

Be sure the line voltage selector is in accordance

with local voltage in your area before connecting the plug to the socket.

DC power cannot be used.

Handling the power cord

Never touch the power cord, or its plug, with wet

hands. Don’t pull the power cord.

Metal items inside the unit may result in electric shock or damage.

Do not permit metal articles to get inside the unit.

If operation seems abnormal

Immediately turn off the power, disconnect the power cord plug from the electrical outlet, and contact the store where it was purchased.

Discontinue using the unit at once. Failure to do so may result in additional damage or some other unexpected damage or accident.

• Because the power source is located inside the unit, it is normal for the cabinet to become warm.

A word about the power cord

If the power cord is scarred, is partially cut or bronken, or has a bad contact, it may cause a fire or serious electrical shock if used. NEVER use a damaged power cord for any appliance. Moreover, the power cord should never be forcibly bent.

Don’t touch the inside parts of this unit.

Some places inside this unit have high voltage potential. Never try to remove the top or back panels of this unit, or to touch inside parts by hand or with tools.

Contact someone who is qualified in order to inspect the inside, or to replace a fuse, if such becomes necessary. Never attempt to do these things yourself.

Be especially careful with regard to this point if children are near this unit. They should be warned never to try to put anything inside.

If, nevertheless, some such article does get inside, disconnect the power cord plug from the electrical outlet, and contact the store where the unit was purchased.

If water gets into the unit

Disconnect the power cord plug from the electrical outlet, and contact the store where it was purchased.

As a precaution, it is suggested that flower vases and other containers which hold liquids not be placed on the top of this unit.

• This product may receive radio interference caused by mobile telephones during use. If such interference is apparent, please increase separation between the product and the mobile telephone.

Maintenance

The following suggestions will assist you in keeping the unit in top condition.

• Be sure to switch the instrument off after use, and do not switch the unit on and off in quick succession, as this places an undue load on the electronic components.

• To keep the luster of the surface and buttons, simply use a clean, damp cloth; polish with a soft, dry cloth. Polish may be used but do not use thinners or petro-chemical-based polishes.

• A wax-based polish may be used on the cabinet, although you will find that rubbing with a soft cloth will suffice.

SVENSK: Det kan inträffa att den här produkten under användningen tar emot radiostörningar, orsakade av mobiltelefoner. Öka avståndet mellan produkten och mobiltelefonen om störningarna är uppenbara.

SERVICE MUST BE CARRIED OUT BY DEALER

OR OTHER QUALIFIED PERSON

QQTG0701

Contents

Cautions for safest use of this unit ............................................................................................................. 7

Controls and functions ............................................................................................................................... 10

BASIC FUNCTIONS

Getting started ................................................................................................................................ 12

Playing the piano ............................................................................................................................ 13

Progressive Pianist......................................................................................................................... 14

See and listen to the demonstration ............................................................................................... 15

Select a sound ................................................................................................................................ 16

Select the registration for a music style (PIANO STYLIST)............................................................ 17

Automatic panel settings (ONE TOUCH PLAY) .............................................................................. 18

Record your performance (SEQUENCER)..................................................................................... 20

Store your panel settings (PANEL MEMORY) ................................................................................ 22

Save data on a floppy disk.............................................................................................................. 23

Load rhythm data from a Technics pattern disk (COMPOSER LOAD)........................................... 25

Play back commercial song disks (DIRECT PLAY) ........................................................................ 26

PRACTICAL APPLICATIONS

About the display ............................................................................................................................ 27

Favorites ......................................................................................................................................... 30

Part I Sounds and effects ......................................................................................................................... 31

Overview of sounds ........................................................................................................................ 31

Selecting sounds ............................................................................................................................ 31

Assigning parts to the keyboard ..................................................................................................... 34

Pedals............................................................................................................................................. 35

Touch Sensitivity............................................................................................................................. 36

Effects............................................................................................................................................. 37

Transpose ....................................................................................................................................... 39

Techni-chord ................................................................................................................................... 40

Part II Playing the rhythm......................................................................................................................... 41

Overview of rhythm performance.................................................................................................... 41

Selecting rhythms ........................................................................................................................... 41

Playing the rhythm.......................................................................................................................... 43

Auto Play Chord.............................................................................................................................. 44

Fade In/Fade Out............................................................................................................................ 48

Sound Arranger .............................................................................................................................. 49

One Touch Play .............................................................................................................................. 49

Piano Stylist.................................................................................................................................... 50

Music Style Arranger ...................................................................................................................... 51

Panel Memory................................................................................................................................. 52

Part III Sequencer ...................................................................................................................................... 54

Outline of the Sequencer................................................................................................................ 54

Sequencer parts ............................................................................................................................. 57

Easy Record ................................................................................................................................... 58

Realtime Record............................................................................................................................. 59

Sequencer Play .............................................................................................................................. 61

Naming ........................................................................................................................................... 63

Panel Write ..................................................................................................................................... 63

Song Select .................................................................................................................................... 64

Punch Record................................................................................................................................. 64

Step Record.................................................................................................................................... 65

Track Assign ................................................................................................................................... 70

Quantize ......................................................................................................................................... 71

Song Clear...................................................................................................................................... 72

Track Clear...................................................................................................................................... 72

Note Edit......................................................................................................................................... 73

Drum Edit........................................................................................................................................ 74

Copy and paste the recorded data ................................................................................................. 75

Changing the note position etc. of the recorded data ..................................................................... 78

Part IV Composer...................................................................................................................................... 80

Outline of the Composer................................................................................................................. 80

Simple recording method................................................................................................................ 81

Create a completely new rhythm .................................................................................................... 82

Chord Modify Change..................................................................................................................... 84

Part Setting..................................................................................................................................... 84

Playback ......................................................................................................................................... 85

Step Record.................................................................................................................................... 86

Measure Edit................................................................................................................................... 87

Pattern Copy................................................................................................................................... 88

QQTG0701

Part V Disk Drive ....................................................................................................................................... 90

Outline of the Disk Drive function ................................................................................................... 90

Outline of the procedure................................................................................................................. 92

Loading data................................................................................................................................... 93

Direct Play ...................................................................................................................................... 95

Song Medley................................................................................................................................... 96

Saving data..................................................................................................................................... 97

Disk management........................................................................................................................... 99

Set the automatic display when a disk is inserted ........................................................................ 100

Part VI Sound........................................................................................................................................... 101

Outline of the Sound ..................................................................................................................... 101

Part Setting................................................................................................................................... 102

Mixer............................................................................................................................................. 104

Master Tuning ............................................................................................................................... 106

Key Scaling................................................................................................................................... 106

Sound Load Option....................................................................................................................... 107

APC Reverb Setting...................................................................................................................... 107

Part VII Reverb & Effect .......................................................................................................................... 108

Outline of the Reverb & Effect ...................................................................................................... 108

Tone Control ................................................................................................................................. 108

Part VIII Sound Edit ................................................................................................................................. 109

Outline of the Sound Edit.............................................................................................................. 109

Easy Edit....................................................................................................................................... 110

Tone Edit....................................................................................................................................... 110

Pitch Edit....................................................................................................................................... 113

Filter Edit....................................................................................................................................... 114

Amplitude Edit............................................................................................................................... 116

LFO Edit........................................................................................................................................ 117

Effect Edit ..................................................................................................................................... 118

Controller Edit............................................................................................................................... 118

Store the new sound..................................................................................................................... 119

Part IX Control ......................................................................................................................................... 120

Outline of Control functions .......................................................................................................... 120

Pedal Setting ................................................................................................................................ 120

Part X Customize..................................................................................................................................... 122

Outline of Customize functions..................................................................................................... 122

Display Time Out .......................................................................................................................... 123

Data Protection............................................................................................................................. 124

MIDI Setting Load Option ............................................................................................................. 124

Part XI MIDI .............................................................................................................................................. 125

What is MIDI? ............................................................................................................................... 125

Outline of MIDI functions .............................................................................................................. 126

Part Setting................................................................................................................................... 127

Control Messages......................................................................................................................... 128

Realtime Messages ...................................................................................................................... 128

Common Setting........................................................................................................................... 129

Mode Setting................................................................................................................................. 130

Input/output Setting....................................................................................................................... 130

MIDI Presets................................................................................................................................. 131

Computer Connection................................................................................................................... 132

Initialize...................................................................................................................................................... 133

Connections .............................................................................................................................................. 134

Assembly ................................................................................................................................................... 135

Symptoms which appear to be signs of trouble .................................................................................... 136

Error messages ......................................................................................................................................... 138

Index........................................................................................................................................................... 140

Specifications............................................................................................................................................ 141

Supplied accessories

䡲

Please check the supplied accessories.

Music stand □ CD-ROM

□

AC cord

□

QQTG0701

Controls and functions

MAIN

VOLUME

MAX

MIN

MAX

OFF

AUTO PLAY CHORD

RHYTHM GROUP

TEMPO / PROGRAM

PROGRESSIVE

PIANIST PIANO STYLIST

SPLIT POINT

METRONOME

POP ROCK

FUNK &

SOUL DISCO

POP BALLAD

BALLAD

BALLROOM

& SHOW

MEMORY

CONTRAST

LATIN & WORLD

JAZZ & SWING

WALTZ & TRADUSA16 BEAT8 BEAT

IN OUT

SOUND

ARRANGER

SET

MODE

CHORD FINDER

OFF/ON

ONE TOUCH

PLAY

APC/SEQUENCER

VOLUME

DEMO

MUSIC STYLE ARRANGER

VARIATION

1 2 1 2 1 1 2 3 4 BEAT

LOAD

SEQUENCER

RESET

COUNT INTRO

234

FADE

FILL IN INTRO & ENDING

SYNCHRO & BREAK

START / STOP TAP TEMPO

HELP

OTHER PARTS/TR

TRANSPOSE

AUTO PLAY CHORD

Add an automatic accompaniment to your selected rhythm. (Refer to page 44.)

PIANO STYLIST

You can choose to have all the settings of this instrument automatically set. (Refer to page 50.)

RHYTHM GROUP

Various rhythm patterns are available for each rhythm group. (Refer to page 41.)

PROGRESSIVE PIANIST

Your piano offers a fun method of learning to play piano. (Refer to page 14.)

FADE IN/OUT

Begin your song with a slowly increasing volume, or end it by having the sound slowly fade away. (Refer to page 48.)

Tuning

Unlike an acoustic piano, your PR Series Digital Ensemble never needs tuning. The pitch of this instrument can be adjusted for when playing along with other instruments. (Refer to page 106.)

TRANSPOSE

Raise or lower the key of the entire keyboard. (Refer to page 39.)

QQTG0701

PAG E

DISPLAY HOLD

EXIT GRAND

UPRIGHT ELECTRIC

MODERN SIMPLE PIANO TECHNI-CHORD BANK

P.MEM 5-8

SET 1 / 5 2 / 6 3 / 7 4 / 8

SOUND GROUP

SEQUENCER

PIANO

STRINGS

BASS

MALLET &

ORCH PERC

WORLD

PIANO

MIXTURES

ORCH

MIXTURES

DIGITAL

DRAWBARS

DRUM KITS

MEMORY

LEFT RIGHT 2 RIGHT 1

DIGITAL EFFECT

MULTI

EFFECT

CHORUS REVERB

CHORD STEP REC

VOCAL

GUITAR &

HARPSI BRASS PLAY

EASY

REC

FAVORITES

PROGRAM

MENUS

DISK

IN USE

DISK

LOAD

SAX &

WOODWIND

ORGAN &

ACCORDION

SYNTH

SOUND

EXPLORER

CONDUCTOR

PANEL MEMORY

EFFECT

Add various effects to the sounds. (Refer to page 37.)

SOUND GROUP

Various sounds are available for each sound group. (Refer to page 31.)

SEQUENCER

Record and play back your performance. (Refer to page 54.)

CONDUCTOR

Assign a different sound to each part, then assign the desired parts to sections of the keyboard. (Refer to page 34.)

TECHNI-CHORD

Block chords are automatically added to the melody. (Refer to page 40.)

PANEL MEMORY

Store the panel settings, then recall them instantaneously just by pressing a button or two. (Refer to page 52.)

FAVORITES

Fashion a customized display in which all your favorite sounds, rhythms and styles etc. are assembled. (Refer to page 30.)

DISPLAY

Displays performance information, function settings and other messages. (Refer to page 27.)

Use the CONTRAST buttons to adjust the display so that it is easy to read.

QQTG0701

Getting started

Basic functions

MAIN

VOLUME

DEMO

MAX

MIN

AUTO PLAY CHORD

SPLIT POINT

PROGRESSIVE

PIANIST PIANO STYLIST

MUSIC STYLE ARRANGER

VOLUME

ONE TOUCH

MODE

OFF/ON

PLAY

CHORD FINDER

1 2 1 2 1 1 2 3 4 BEAT

VARIATION

MAX

OFF

IN OUT

ARRANGER

FILL IN INTRO & ENDING

SEQUENCER

COUNT

RESET

INTRO

RHYTHM GROUP

SOUND

SET

METRONOME

234

POP ROCK

SYNCHRO & BREAK

FUNK & SOUL DISCO

POP BALLAD

WALTZ & TRADUSA16 BEAT8 BEAT

START / STOP TAP TEMPO

JAZZ & SWING

TEMPO / PROGRAM

BALLROOM

BALLAD

& SHOW

LATIN &

MEMORY

WORLD

CONTRAST

LOAD

TRANSPOSE

HELP

OTHER PARTS/TR

MUTE

PAGE

DISPLAY HOLD

EXIT GRAND

FADE

APC/SEQUENCER

SOUND GROUP

GUITAR &

SAX &

ORGAN &

STRINGS

VOCAL

HARPSI BRASS PLAY

MALLET & ORCH PERC

WORLD

BASS

UPRIGHT ELECTRIC

SOUND

WOODWIND

ACCORDION

SYNTH

EXPLORER

PIANO

ORCH

DIGITAL

MIXTURES

DRAWBARS

DRUM KITS

MEMORY

MODERN SIMPLE PIANO TECHNI-CHORD BANK

PIANO

SEQUENCER

CHORD STEP REC

CONDUCTOR

LEFT RIGHT 2 RIGHT 1

SET 1 / 5 2 / 6 3 / 7 4 / 8

EASY REC

FAVORITES

PANEL MEMORY

PROGRAM

DISK

MENUS

IN USE

DISK

LOAD

DIGITAL

MULTI

EFFECT

CHORUS REVERB

P.MEM 5-8

Plug the power cord into an outlet.

Press the POWER button to turn it on.

Set the MAIN VOLUME to an appropriate level with the sliding control.

MAIN

VOLUME

MAX

POWER

OFF ON

MIN

(Right end of the keyboard)

• The power indicator in the left front of the body is lit.

Touch any note on the keyboard.

• Your piano features Touch Response. You control the volume by playing the keys harder or softer.

Keyboard cover

Open and close the cover slowly.

Music Stand

Insert the music stand in the two holes as shown in the diagram.

QQTG0701

Playing the piano

Your piano is equipped with various fine functions which make it an extremely versatile instrument. But it should be remembered that it is first of all a fine piano. Select one of the piano sounds and enjoy its excellent quality. When you activate the SIMPLE PIANO feature, the entire keyboard is instantly transformed into a piano, regardless of the current instrument settings.

Basic functions

AUTO PLAY CHORD

SPLIT

MAIN

POINT

VOLUME

MAX

PROGRESSIVE

PIANIST PIANO STYLIST

MIN

MUSIC STYLE ARRANGER

DEMO

VOLUME

ONE TOUCH

MODE

OFF/ON

PLAY

CHORD FINDER

1 2 1 2 1 1 2 3 4 BEAT

VARIATION

MAX

OFF

IN OUT

ARRANGER

FILL IN INTRO & ENDING

SEQUENCER

COUNT

RESET

INTRO

RHYTHM GROUP

SOUND

SET

METRONOME

234

POP ROCK

SYNCHRO & BREAK

FUNK & SOUL DISCO

POP BALLAD

WALTZ & TRADUSA16 BEAT8 BEAT

START / STOP TAP TEMPO

BALLROOM

BALLAD

& SHOW

LATIN &

JAZZ &

MEMORY

WORLD

SWING

CONTRAST

LOAD

TRANSPOSE

FADE

APC/SEQUENCER

Press the SIMPLE PIANO button to turn it on.

SIMPLE PIANO

• The indicator lights.

• The display changes to the SIMPLE PIANO

display.

Select the desired type of piano sound.

TEMPO / PROGRAM

SOUND GROUP

GUITAR &

SAX &

ORGAN &

STRINGS

VOCAL

HARPSI BRASS PLAY

MALLET &

WORLD

ORCH PERC

BASS

HELP

OTHER PARTS/TR

MUTE

PAGE

DISPLAY HOLD

EXIT GRAND

UPRIGHT ELECTRIC

SOUND

WOODWIND

ACCORDION

SYNTH

EXPLORER

PIANO

ORCH

DIGITAL

DRUM KITS

MEMORY

MIXTURES

DRAWBARS

MODERN SIMPLE PIANO TECHNI-CHORD BANK

PIANO

SEQUENCER

CHORD STEP REC

CONDUCTOR

LEFT RIGHT 2 RIGHT 1

SET 1 / 5 2 / 6 3 / 7 4 / 8

EASY REC

FAVORITES

PANEL MEMORY

PROGRAM

DISK

MENUS

IN USE

DISK

LOAD

DIGITAL

MULTI

CHORUS REVERB

EFFECT

P.MEM 5-8

• The sounds and effects are automatically set.

•“COMPLETED!” is shown on the display, and

then the normal display reappears.

Play anywhere on the keyboard.

• This procedure will cancel the current settings for sounds and effects, etc. Therefore, if you wish to later recall the current settings, be sure to store them in the PANEL MEMORY (page 52) or save them to a disk (page 97) before beginning this procedure.

QQTG0701

Progressive Pianist

MAIN

VOLUME

MAX

MIN

MAX

OFF

AUTO PLAY CHORD

RHYTHM GROUP

TEMPO / PROGRAM

PROGRESSIVE

PIANIST PIANO STYLIST

SPLIT POINT

METRONOME

POP ROCK

FUNK &

SOUL DISCO

POP BALLAD

BALLAD

BALLROOM

& SHOW

MEMORY

CONTRAST

LATIN & WORLD

JAZZ & SWING

WALTZ

& TRADUSA16 BEAT8 BEAT

IN OUT

SOUND

ARRANGER

SET

MODE

CHORD FINDER

OFF/ON

ONE TOUCH

PLAY

APC/SEQUENCER

VOLUME

DEMO

MUSIC STYLE ARRANGER

VARIATION

1 2 1 2 1 1 2 3 4 BEAT

LOAD

SEQUENCER

RESET

COUNT INTRO

234

FADE

FILL IN INTRO & ENDING

SYNCHRO & BREAK

START / STOP TAP TEMPO

HELP

OTHER PARTS/TR

TRANSPOSE

MUTE

PAGE

DISPLAY HOLD

EXIT GRAND

UPRIGHT ELECTRIC

MODERN SIMPLE PIANO TECHNI-CHORD BANK

P.MEM 5-8

SET 1 / 5 2 / 6 3 / 7 4 / 8

SOUND GROUP

SEQUENCER

PIANO

STRINGS

BASS

MALLET & ORCH PERC

WORLD

PIANO

MIXTURES

ORCH

MIXTURES

DIGITAL

DRAWBARS

DRUM KITS

MEMORY

LEFT RIGHT 2 RIGHT 1

DIGITAL EFFECT

MULTI EFFECT

CHORUS REVERB

CHORD STEP REC

VOCAL

GUITAR & HARPSI BRASS PLAY

EASY REC

FAVORITES

PROGRAM

MENUS

DISK IN USE

DISK

LOAD

SAX &

WOODWIND

ORGAN &

ACCORDION

SYNTH

SOUND

EXPLORER

CONDUCTOR

PANEL MEMORY

2-81·9

Your piano offers a fun method of learning to play piano. Start one of the 100 etudes incorporated in this piano, read the music in the display, listen to the gentle accompaniment for your own and, have a good

Basic functions

practice!

Press the PROGRESSIVE PIANIST button.

PROGRESSIVE

PIANIST

Select the goal of the practice.

Use the SONG ∧ and ∨ buttons to select a preferred song.

Press the LISTEN button.

When you have finished listening, press the appropriate button to access the next step.

• In the Practice Makes Perfect/Musical Discovery mode, press the PLAY (STEP2) button, and for the Grand Performer/Pianist Mode Session mode, follow the step number to continue your practice.

Press the RESET button.

• The MEASURE returns to the beginning of the song.

Press the START/STOP button to start the exercise. Play the keyboard and follow the music exactly.

• To redo your exercise from the beginning, press the START/STOP button to stop the music and press the SEQUENCER RESET (FILL IN 1) button. You can also use the MEAS button to start from a desired position.

• If the tempo of the accompaniment is too fast, press the SLOW 1 button in the ONE TOUCH TEMPO section. If it is still too fast, press the SLOW 2 button. (You can also use the TEMPO/PROGRAM dial to adjust the tempo.)

• The music pages shown on the display turn automatically. If you wish to turn them manually, set TURN PAGE to MANUAL and you can press the PAGE button to change the display (upper; previous page, lower; next page). In this case, you can also turn the page by depressing the left pedal.

• To play a different song while the performance is stopped, press the EXIT button, and then repeat the above procedure from step 2.

To exit this feature, press the PROGRESSIVE PIANIST button again.

Press the START/STOP button on the control panel and listen to the model

interpretation while watching the music on the display.

• Press the START/STOP button to stop the

model performance. Press it again to continue the interpretation from the point at which it was interrupted.

QQTG0701

See and listen to the demonstration

Basic functions

APC/SEQUENCER

VOLUME

MAX

OFF

FADE

SOUND

IN OUT

ARRANGER

FILL IN INTRO & ENDING

SEQUENCER

COUNT

RESET

INTRO

RHYTHM GROUP

FUNK & SOUL DISCO

POP BALLAD

JAZZ &

WALTZ

SWING

& TRADUSA16 BEAT8 BEAT

START / STOP TAP TEMPO

BALLROOM

BALLAD

& SHOW

LATIN &

MEMORY

WORLD

CONTRAST

LOAD

TRANSPOSE

METRONOME

POP ROCK

SET

234

SYNCHRO & BREAK

AUTO PLAY CHORD

SPLIT

MAIN

VOLUME

MAX

MIN

DEMO

ONE TOUCH

MODE

OFF/ON

PLAY

POINT

CHORD FINDER

PROGRESSIVE

PIANIST PIANO STYLIST

1 2 1 2 1 1 2 3 4 BEAT

MUSIC STYLE ARRANGER

VARIATION

Press the DEMO button.

DEMO

Use the buttons to the left and right the display to select the demonstration tune you wish to see and listen to.

TEMPO / PROGRAM

SOUND GROUP

GUITAR &

SAX &

ORGAN &

STRINGS

VOCAL

HARPSI BRASS PLAY

MALLET &

WORLD

ORCH PERC

BASS

HELP

OTHER PARTS/TR

MUTE

PAGE

DISPLAY HOLD

EXIT GRAND

UPRIGHT ELECTRIC

SOUND

WOODWIND

ACCORDION

SYNTH

EXPLORER

PIANO

ORCH

DIGITAL

DRUM KITS

MEMORY

MIXTURES

DRAWBARS

MODERN SIMPLE PIANO TECHNI-CHORD BANK

PIANO

SEQUENCER

CHORD STEP REC

CONDUCTOR

LEFT RIGHT 2 RIGHT 1

SET 1 / 5 2 / 6 3 / 7 4 / 8

EASY REC

FAVORITES

PANEL MEMORY

PROGRAM

DISK

MENUS

IN USE

DISK

LOAD

DIGITAL

MULTI

CHORUS REVERB

EFFECT

P.MEM 5-8

21·3

• The demonstration performance and display corresponding to your selection will begin.

• To end the demonstration before it has finished, press the START/STOP button.

When you are finished listening to the

demonstration tunes, press the DEMO button again.

• If you press and hold the DEMO button for a few seconds, or if you press first the DEMO button and then the START/STOP button, all the internal demo tunes are demonstrated in order in a medley performance. The medley performance continues until the START/STOP button or the DEMO button is pressed again.

• Some of the buttons do not function during the DEMO mode.

QQTG0701

Select a sound

GRAND

UPRIGHT ELECTRIC

MODERN

PIANO

SOUND GROUP

STRINGS

BASS

MALLET &

ORCH PERC

WORLD

PIANO

MIXTURES

ORCH

MIXTURES

DIGITAL

DRAWBARS

DRUM KITS

MEMORY

VOCAL

GUITAR &

HARPSI BRASS

SAX &

WOODWIND

ORGAN &

ACCORDION

SYNTH

SOUND

EXPLORER

Basic functions

MAIN

VOLUME

DEMO

MAX

MIN

AUTO PLAY CHORD

SPLIT POINT

PROGRESSIVE

PIANIST PIANO STYLIST

MUSIC STYLE ARRANGER

VOLUME

ONE TOUCH

MODE

OFF/ON

PLAY

CHORD FINDER

1 2 1 2 1 1 2 3 4 BEAT

VARIATION

MAX

OFF

IN OUT

ARRANGER

FILL IN INTRO & ENDING

SEQUENCER

COUNT

RESET

INTRO

RHYTHM GROUP

SOUND

SET

METRONOME

234

POP ROCK

SYNCHRO & BREAK

FUNK & SOUL DISCO

POP BALLAD

WALTZ

& TRADUSA16 BEAT8 BEAT

START / STOP TAP TEMPO

JAZZ & SWING

TEMPO / PROGRAM

BALLROOM

BALLAD

& SHOW

LATIN &

MEMORY

WORLD

CONTRAST

LOAD

TRANSPOSE

HELP

OTHER PARTS/TR

MUTE

PAGE

DISPLAY HOLD

EXIT GRAND

FADE

APC/SEQUENCER

SOUND GROUP

GUITAR &

SAX &

ORGAN &

WOODWIND

ACCORDION

SYNTH

PIANO

ORCH

DIGITAL

MIXTURES

DRAWBARS

DRUM KITS

MODERN SIMPLE PIANO TECHNI-CHORD BANK

PIANO

SOUND

EXPLORER

MEMORY

STRINGS

VOCAL

HARPSI BRASS PLAY

MALLET & ORCH PERC

WORLD

BASS

UPRIGHT ELECTRIC

SEQUENCER

CHORD STEP REC

CONDUCTOR

LEFT RIGHT 2 RIGHT 1

SET 1 / 5 2 / 6 3 / 7 4 / 8

EASY REC

FAVORITES

PANEL MEMORY

PROGRAM

DISK

MENUS

IN USE

DISK

LOAD

DIGITAL

MULTI

EFFECT

CHORUS REVERB

P.MEM 5-8

321A

In the CONDUCTOR section on the panel, press the RIGHT 1 button to turn it on.

LEFT RIGHT 2 RIGHT 1

CONDUCTOR

In the SOUND GROUP or PIANO section, press one of the sound buttons.

Add reverberation.

Press the REVERB button to turn it on.

REVERB

QQTG0701

Select a sound from the list of sounds shown on the display.

• For most of the buttons, the list of sounds is contained on two or more screen “pages.” To see a different part of the list, press either PAGE button.

Play the keyboard.

Select the registration for a music style

APC/SEQUENCER

VOLUME

MAX

OFF

IN OUT

FILL IN INTRO & ENDING

SEQUENCER

RESET

FADE

SOUND

ARRANGER

METRONOME

POP ROCK

SET

234

SYNCHRO & BREAK

COUNT INTRO

PIANO STYLIST

RHYTHM GROUP

FUNK & SOUL DISCO

WALTZ

& TRADUSA16 BEAT8 BEAT

START / STOP TAP TEMPO

POP BALLAD

JAZZ & SWING

AUTO PLAY CHORD

SPLIT

MAIN

VOLUME

MAX

MIN

DEMO

ONE TOUCH

MODE

OFF/ON

PLAY

POINT

CHORD FINDER

PROGRESSIVE

PIANIST PIANO STYLIST

1 2 1 2 1 1 2 3 4 BEAT

MUSIC STYLE ARRANGER

VARIATION

Press the PIANO STYLIST button to turn it on.

Press the PIANO STYLES button.

(PIANO STYLIST)

TEMPO / PROGRAM

BALLROOM

BALLAD

& SHOW

LATIN &

MEMORY

WORLD

CONTRAST

LOAD

TRANSPOSE

HELP

OTHER PARTS/TR

MUTE

PAGE

2-61·7

Use the GENRE/ERA/ALPHABET

button to select a group. Use the STYLE button to select a style.

• In the above example, GENRE was selected.

• If the list covers more than one screen “page,”

the MORE button is shown on the display. Use the MORE button to switch between screen pages.

• The AUTO PLAY CHORD and SYNCHRO & BREAK turn on, and the sounds, effects,

rhythm, tempo, volume balance, etc. which are best suited for the selected music style are automatically selected.

DISPLAY HOLD

EXIT GRAND

SOUND GROUP

GUITAR &

SAX &

STRINGS

BASS

ORGAN &

VOCAL

HARPSI BRASS PLAY

WOODWIND

ACCORDION

MALLET &

PIANO

ORCH

DIGITAL

ORCH PERC

WORLD

MIXTURES

DRAWBARS

UPRIGHT ELECTRIC

MODERN SIMPLE PIANO TECHNI-CHORD BANK

PIANO

SYNTH

DRUM KITS

SOUND

EXPLORER

MEMORY

SEQUENCER

CHORD STEP REC

CONDUCTOR

LEFT RIGHT 2 RIGHT 1

SET 1 / 5 2 / 6 3 / 7 4 / 8

EASY REC

FAVORITES

PANEL MEMORY

Basic functions

PROGRAM

DISK

MENUS

IN USE

DISK

LOAD

DIGITAL

MULTI

EFFECT

CHORUS REVERB

P.MEM 5-8

Use the ARRANGE MODE button to select the desired type of arrangement.

• Select the type you wish to play (PIANO SOLO/PIANO & COMBO/PIANO & ENSEMBLE).

Use the SELECT MODE button to specify how you wish to select a style.

GENRE: Select a style by musical genre. ERA: Select a style by era. ALPHABET: Select a style from an alphabetical

list.

Play the keyboard.

• When you specify a chord on the left area of the keyboard, the automatic accompaniment immediately begins to play.

• You can use the TEMPO/PROGRAM dial to adjust the tempo.

When you are finished selecting the style, turn the PIANO STYLIST button off.

QQTG0701

Automatic panel settings

INTRO & ENDING

(ONE TOUCH PLAY)

Basic functions

APC/SEQUENCER

VOLUME

MAX

OFF

FADE

IN OUT

ARRANGER

FILL IN INTRO & ENDING

SEQUENCER

COUNT

RESET

INTRO

RHYTHM GROUP

SOUND

SET

METRONOME

234

POP ROCK

SYNCHRO & BREAK

FUNK & SOUL DISCO

POP BALLAD

WALTZ

& TRADUSA16 BEAT8 BEAT

START / STOP TAP TEMPO

JAZZ & SWING

TEMPO / PROGRAM

BALLROOM

BALLAD

& SHOW

LATIN &

MEMORY

WORLD

CONTRAST

LOAD

TRANSPOSE

HELP

OTHER PARTS/TR

MUTE

PAGE

DISPLAY HOLD

EXIT GRAND

AUTO PLAY CHORD

SPLIT

MAIN

VOLUME

MAX

MIN

DEMO

ONE TOUCH

MODE

OFF/ON

PLAY

POINT

CHORD FINDER

PROGRESSIVE

PIANIST PIANO STYLIST

1 2 1 2 1 1 2 3 4 BEAT

MUSIC STYLE ARRANGER

VARIATION

SOUND GROUP

GUITAR &

SAX &

ORGAN &

WOODWIND

ACCORDION

SYNTH

PIANO

ORCH

DIGITAL

MIXTURES

DRAWBARS

DRUM KITS

MODERN SIMPLE PIANO TECHNI-CHORD BANK

PIANO

SOUND

EXPLORER

MEMORY

STRINGS

VOCAL

HARPSI BRASS PLAY

MALLET & ORCH PERC

WORLD

BASS

UPRIGHT ELECTRIC

SEQUENCER

CHORD STEP REC

CONDUCTOR

LEFT RIGHT 2 RIGHT 1

SET 1 / 5 2 / 6 3 / 7 4 / 8

EASY REC

FAVORITES

PANEL MEMORY

PROGRAM

DISK

MENUS

IN USE

DISK

LOAD

DIGITAL

MULTI

EFFECT

CHORUS REVERB

P.MEM 5-8

2153

In the RHYTHM GROUP section, press the button for a desired rhythm.

RHYTHM GROUP

METRONOME

POP ROCK

FUNK &

SOUL DISCO

WALTZ

& TRADUSA16 BEAT8 BEAT

POP BALLAD

JAZZ &

SWING

BALLAD

LATIN & WORLD

BALLROOM

& SHOW

MEMORY

Use your left hand to play the chords and your right hand to play the melody.

• Pressing a key on the left area of the keyboard will cause the automatic rhythm pattern to start playing (synchro start).

At the end of your performance, press the INTRO & ENDING 1 or 2 button.

LOAD

• Do not select the METRONOME or the MEMORY button.

Select a rhythm from the list of rhythms on the display.

Press and hold the ONE TOUCH PLAY button for a few seconds.

ONE TOUCH

PLAY

• An ending pattern is played, after which the automatic accompaniment stops.

• If the START/STOP button is pressed, the accompaniment stops immediately.

• The sound, effects and tempo suitable for the selected rhythm are automatically selected. The tempo can be adjusted with the TEMPO/PROGRAM dial.

QQTG0701

Basic functions

C F G

CG7 F

• In this example you played chords by pressing the keys for the “root notes” (ONE FINGER chords). But you can also specify the chord by playing all the notes in the chord. (Refer to page 45.)

• You can insert a fill-in pattern while the preset rhythm pattern is playing by pressing either the FILL IN 1 or FILL IN 2 button.

QQTG0701

Record your performance

Sonatina

Right hand

Left hand

(SEQUENCER)

Basic functions

APC/SEQUENCER

VOLUME

MAX

OFF

FADE

IN OUT

ARRANGER

FILL IN INTRO & ENDING

SEQUENCER

COUNT

RESET

INTRO

RHYTHM GROUP

SOUND

SET

METRONOME

234

POP ROCK

SYNCHRO & BREAK

FUNK & SOUL DISCO

POP BALLAD

WALTZ

& TRADUSA16 BEAT8 BEAT

START / STOP TAP TEMPO

JAZZ & SWING

TEMPO / PROGRAM

BALLROOM

BALLAD

& SHOW

LATIN &

MEMORY

WORLD

CONTRAST

LOAD

TRANSPOSE

HELP

OTHER PARTS/TR

MUTE

PAGE

DISPLAY HOLD

EXIT GRAND

AUTO PLAY CHORD

SPLIT

MAIN

VOLUME

MAX

MIN

DEMO

ONE TOUCH

MODE

OFF/ON

PLAY

POINT

CHORD FINDER

PROGRESSIVE

PIANIST PIANO STYLIST

1 2 1 2 1 1 2 3 4 BEAT

MUSIC STYLE ARRANGER

VARIATION

SOUND GROUP

GUITAR &

SAX &

ORGAN &

WOODWIND

ACCORDION

SYNTH

PIANO

ORCH

DIGITAL

MIXTURES

DRAWBARS

DRUM KITS

MODERN SIMPLE PIANO TECHNI-CHORD BANK

PIANO

SOUND

EXPLORER

MEMORY

STRINGS

VOCAL

HARPSI BRASS PLAY

MALLET & ORCH PERC

WORLD

BASS

UPRIGHT ELECTRIC

SEQUENCER

CHORD STEP REC

CONDUCTOR

LEFT RIGHT 2 RIGHT 1

SET 1 / 5 2 / 6 3 / 7 4 / 8

EASY REC

FAVORITES

PANEL MEMORY

PROGRAM

DISK

MENUS

IN USE

DISK

LOAD

DIGITAL

MULTI

EFFECT

CHORUS REVERB

P.MEM 5-8

QQTG0701

In the SEQUENCER section, press the

EASY REC button to turn it on.

SEQUENCER

EASY

PLAY

REC

Press the OK button.

• The display changes to the REALTIME RECORD display.

Basic functions

SEQUENCER

PLAY

EASY

REC

SEQUENCER

RESET

COUNT INTRO

FILL IN

APC/SEQUENCER

VOLUME

MAX

OFF

FADE

IN OUT

ARRANGER

FILL IN INTRO & ENDING

SEQUENCER

COUNT

RESET

INTRO

RHYTHM GROUP

SOUND

SET

METRONOME

234

POP ROCK

SYNCHRO & BREAK

FUNK & SOUL DISCO

POP BALLAD

WALTZ

& TRADUSA16 BEAT8 BEAT

START / STOP TAP TEMPO

BALLROOM

BALLAD

& SHOW

LATIN &

JAZZ &

MEMORY

WORLD

SWING

CONTRAST

LOAD

TRANSPOSE

AUTO PLAY CHORD

SPLIT

MAIN

VOLUME

MAX

MIN

DEMO

ONE TOUCH

MODE

OFF/ON

PLAY

POINT

CHORD FINDER

PROGRESSIVE

PIANIST PIANO STYLIST

1 2 1 2 1 1 2 3 4 BEAT

MUSIC STYLE ARRANGER

VARIATION

Play the song on the keyboard.

When you have finished playing, press the EASY REC button again to turn it off.

TEMPO / PROGRAM

SOUND GROUP

GUITAR &

SAX &

ORGAN &

WOODWIND

ACCORDION

SYNTH

PIANO

ORCH

DIGITAL

MIXTURES

DRAWBARS

DRUM KITS

MODERN SIMPLE PIANO TECHNI-CHORD BANK

PIANO

SOUND

EXPLORER

MEMORY

STRINGS

VOCAL

HARPSI BRASS PLAY

MALLET & ORCH PERC

WORLD

BASS

HELP

OTHER PARTS/TR

MUTE

PAGE

DISPLAY HOLD

EXIT GRAND

UPRIGHT ELECTRIC

SEQUENCER

CHORD STEP REC

CONDUCTOR

LEFT RIGHT 2 RIGHT 1

SET 1 / 5 2 / 6 3 / 7 4 / 8

EASY REC

FAVORITES

PANEL MEMORY

PROGRAM

DISK

MENUS

IN USE

DISK

LOAD

DIGITAL

MULTI

EFFECT

CHORUS REVERB

P.MEM 5-8

4BA

Playing back your recorded performance

Press the SEQUENCER RESET (FILL

IN 1) button.

• The PLAY button in the SEQUENCER section turns on.

Press the START/STOP button.

1 2 3 4 BEAT

START / STOP

• Your performance is played back just as you recorded it.

• When you are finished playing back your performance, press the PLAY button in the SEQUENCER section to turn it off.

QQTG0701

Store your panel settings

BANK

(PANEL MEMORY)

Basic functions

APC/SEQUENCER

VOLUME

MAX

OFF

FADE

IN OUT

ARRANGER

FILL IN INTRO & ENDING

SEQUENCER

COUNT

RESET

INTRO

RHYTHM GROUP

SOUND

SET

METRONOME

234

POP ROCK

SYNCHRO & BREAK

FUNK & SOUL DISCO

POP BALLAD

WALTZ

& TRADUSA16 BEAT8 BEAT

START / STOP TAP TEMPO

BALLROOM

BALLAD

& SHOW

LATIN &

JAZZ &

MEMORY

WORLD

SWING

CONTRAST

LOAD

TRANSPOSE

AUTO PLAY CHORD

SPLIT

MAIN

VOLUME

MAX

MIN

DEMO

ONE TOUCH

MODE

OFF/ON

PLAY

POINT

CHORD FINDER

PROGRESSIVE

PIANIST PIANO STYLIST

1 2 1 2 1 1 2 3 4 BEAT

MUSIC STYLE ARRANGER

VARIATION

Set up the desired panel settings (sounds, volumes, etc.)

Use the BANK button to select a bank (A, B, C).

• Lighting up both the A and B indicators enables C to be selected.

• The bank names are shown on the display.

BANK

TEMPO / PROGRAM

SOUND GROUP

GUITAR &

SAX &

ORGAN &

WOODWIND

ACCORDION

SYNTH

PIANO

ORCH

DIGITAL

MIXTURES

DRAWBARS

DRUM KITS

MODERN SIMPLE PIANO TECHNI-CHORD BANK

PIANO

SOUND

EXPLORER

MEMORY

STRINGS

VOCAL

HARPSI BRASS PLAY

MALLET & ORCH PERC

WORLD

BASS

HELP

OTHER PARTS/TR

MUTE

PAGE

DISPLAY HOLD

EXIT GRAND

UPRIGHT ELECTRIC

SEQUENCER

CHORD STEP REC

CONDUCTOR

LEFT RIGHT 2 RIGHT 1

SET 1 / 5 2 / 6 3 / 7 4 / 8

EASY REC

FAVORITES

PANEL MEMORY

PROGRAM

DISK

MENUS

IN USE

DISK

LOAD

DIGITAL

MULTI

EFFECT

CHORUS REVERB

P.MEM 5-8

With the SET button held down, press

one of the numbered buttons of the PANEL MEMORY (1 to 8).

P.MEM 5-8

SET 1 / 5 2 / 6 3 / 7 4 / 8

PANEL MEMORY

• Turning the P.MEM 5-8 button ON enables the selection of panel settings for numbers 5 to 8.

• The current panel settings are now stored in the specified bank and number. When you select the same bank and number again, the stored panel settings are recalled.

QQTG0701

Save data on a floppy disk

MUTE

AUTO PLAY CHORD

SPLIT

MAIN

POINT

VOLUME

MAX

PROGRESSIVE

PIANIST PIANO STYLIST

MIN

MUSIC STYLE ARRANGER

DEMO

VOLUME

ONE TOUCH

MODE

OFF/ON

PLAY

CHORD FINDER

1 2 1 2 1 1 2 3 4 BEAT

VARIATION

MAX

OFF

IN OUT

ARRANGER

FILL IN INTRO & ENDING

SEQUENCER

COUNT

RESET

INTRO

RHYTHM GROUP

SOUND

SET

METRONOME

234

POP ROCK

SYNCHRO & BREAK

FUNK & SOUL DISCO

POP BALLAD

WALTZ

& TRADUSA16 BEAT8 BEAT

START / STOP TAP TEMPO

BALLROOM

BALLAD

& SHOW

LATIN &

JAZZ &

MEMORY

WORLD

SWING

CONTRAST

LOAD

TRANSPOSE

FADE

APC/SEQUENCER

Insert a disk you wish to save to into the Disk Drive slot. Push it all the way in until you hear a click.

TEMPO / PROGRAM

SOUND GROUP

GUITAR &

SAX &

ORGAN &

WOODWIND

ACCORDION

SYNTH

PIANO

ORCH

DIGITAL

DRUM KITS

MIXTURES

DRAWBARS

MODERN SIMPLE PIANO TECHNI-CHORD BANK

PIANO

SOUND

EXPLORER

MEMORY

STRINGS

VOCAL

HARPSI BRASS PLAY

MALLET &

WORLD

ORCH PERC

BASS

HELP

OTHER PARTS/TR

MUTE

PAGE

DISPLAY HOLD

EXIT GRAND

UPRIGHT ELECTRIC

SEQUENCER

CHORD STEP REC

CONDUCTOR

LEFT RIGHT 2 RIGHT 1

SET 1 / 5 2 / 6 3 / 7 4 / 8

EASY REC

FAVORITES

PANEL MEMORY

PROGRAM

DISK

MENUS

IN USE

DISK

LOAD

DIGITAL

MULTI

CHORUS REVERB

EFFECT

P.MEM 5-8

Basic functions

2-5

Specify a file number to save to.

On the DISK MENU display, select SAVE.

• If you attempt to use the SAVE procedure when an unformatted disk is inserted into the Disk Drive slot, the FORMAT display appears. Follow the instructions on the display to format the disk. (Formatting the disk will clear any data which is currently stored on the disk.)

Select TECHNICS FORMAT.

Press the SAVE button.

• The performance data of the song recorded in the SEQUENCER is saved on the floppy disk.

QQTG0701

Basic functions

MUTE

MAIN

VOLUME

DEMO

MAX

MIN

AUTO PLAY CHORD

SPLIT POINT

PROGRESSIVE

PIANIST PIANO STYLIST

MUSIC STYLE ARRANGER

VOLUME

ONE TOUCH

MODE

OFF/ON

PLAY

CHORD FINDER

1 2 1 2 1 1 2 3 4 BEAT

VARIATION

MAX

OFF

IN OUT

ARRANGER

FILL IN INTRO & ENDING

SEQUENCER

COUNT

RESET

INTRO

RHYTHM GROUP

SOUND

SET

METRONOME

234

POP ROCK

SYNCHRO & BREAK

FUNK & SOUL DISCO

POP BALLAD

WALTZ

& TRADUSA16 BEAT8 BEAT

START / STOP TAP TEMPO

JAZZ & SWING

TEMPO / PROGRAM

BALLROOM

BALLAD

& SHOW

LATIN &

MEMORY

WORLD

CONTRAST

LOAD

TRANSPOSE

HELP

OTHER PARTS/TR

MUTE

PAGE

DISPLAY HOLD

EXIT GRAND

FADE

APC/SEQUENCER

SOUND GROUP

GUITAR &

SAX &

ORGAN &

WOODWIND

ACCORDION

SYNTH

PIANO

ORCH

DIGITAL

DRUM KITS

MIXTURES

DRAWBARS

MODERN SIMPLE PIANO TECHNI-CHORD BANK

PIANO

SOUND

EXPLORER

MEMORY

STRINGS

VOCAL

HARPSI BRASS PLAY

MALLET &

WORLD

ORCH PERC

BASS

UPRIGHT ELECTRIC

SEQUENCER

CHORD STEP REC

CONDUCTOR

LEFT RIGHT 2 RIGHT 1

SET 1 / 5 2 / 6 3 / 7 4 / 8

EASY REC

FAVORITES

PANEL MEMORY

PROGRAM

DISK

MENUS

IN USE

DISK

LOAD

DIGITAL

MULTI

CHORUS REVERB

EFFECT

P.MEM 5-8

2·3541

Recall data from a floppy disk

Press and hold the DISK button for a few

seconds.

DISK

LOAD

DISK

IN USE

Select the file you wish to load.

Press the LOAD button.

• The data is copied to the internal memory of this instrument.

Press the PLAY button in the

SEQUENCER section to turn it on.

SEQUENCER

EASY

PLAY

REC

CHORD STEP REC

Press the START/STOP button.

1 2 3 4 BEAT

START / STOP

• The recalled song is played back.

■■■■ The following data can be saved/loaded:

CURRENT PANEL (The current panel settings) PANEL MEMORY

PERFORMANCE

SEQUENCER COMPOSER (MEMORY contents) SOUND MEMORY EFFECT MEMORY

BACKUP MIDI (USER memory of the MIDI PRESETS) & FAVORITES

• For detailed infomation, refer to page 90.

QQTG0701

Load rhythm data from a Technics

RHYTHM GROUP

METRONOME

POP ROCK

FUNK &

SOUL DISCO

POP BALLAD

BALLAD

BALLROOM

& SHOW

MEMORY

LATIN & WORLD

JAZZ & SWING

WALTZ

& TRADUSA16 BEAT8 BEAT

LOAD

pattern disk

APC/SEQUENCER

VOLUME

MAX

OFF

FADE

IN OUT

ARRANGER

FILL IN INTRO & ENDING

SEQUENCER

COUNT

RESET

INTRO

RHYTHM GROUP

SOUND

SET

METRONOME

234

POP ROCK

SYNCHRO & BREAK

FUNK & SOUL DISCO

POP BALLAD

WALTZ

& TRADUSA16 BEAT8 BEAT

START / STOP TAP TEMPO

BALLROOM

BALLAD

& SHOW

LATIN &

JAZZ &

MEMORY

WORLD

SWING

LOAD

AUTO PLAY CHORD

SPLIT

MAIN

VOLUME

MAX

MIN

DEMO

ONE TOUCH

MODE

OFF/ON

PLAY

POINT

CHORD FINDER

PROGRESSIVE

PIANIST PIANO STYLIST

1 2 1 2 1 1 2 3 4 BEAT

MUSIC STYLE ARRANGER

VARIATION

Insert a commercially sold Technics pattern disk into the Disk Drive slot.

In the RHYTHM GROUP section, press and hold the LOAD (MEMORY) button for a few seconds.

(COMPOSER LOAD)

TEMPO / PROGRAM

CONTRAST

HELP

TRANSPOSE

OTHER PARTS/TR

MUTE

PAGE

DISPLAY HOLD

EXIT GRAND

3·42

Press the LOAD button.

SOUND GROUP

GUITAR &

SAX &

ORGAN &

WOODWIND

ACCORDION

SYNTH

PIANO

ORCH

DIGITAL

MIXTURES

DRAWBARS

DRUM KITS

MODERN SIMPLE PIANO TECHNI-CHORD BANK

PIANO

SOUND

EXPLORER

MEMORY

STRINGS

VOCAL

HARPSI BRASS PLAY

MALLET & ORCH PERC

WORLD

BASS

UPRIGHT ELECTRIC

SEQUENCER

CHORD STEP REC

CONDUCTOR

LEFT RIGHT 2 RIGHT 1

SET 1 / 5 2 / 6 3 / 7 4 / 8

EASY REC

FAVORITES

PANEL MEMORY

Basic functions

PROGRAM

DISK

MENUS

IN USE

DISK

LOAD

DIGITAL

MULTI

EFFECT

CHORUS REVERB

P.MEM 5-8

• Rhythm data is loaded to the COMPOSER memory (MEMORY). You can use the rhythms during your performance, just like the preset rhythms.

Select the name of the pattern to load.

MUTE

QQTG0701

Play back commercial song disks

MUTE

(DIRECT PLAY)

Basic functions

APC/SEQUENCER

VOLUME

MAX

OFF

FADE

IN OUT

ARRANGER

FILL IN INTRO & ENDING

SEQUENCER

COUNT

RESET

INTRO

RHYTHM GROUP

SOUND

SET

METRONOME

234

POP ROCK

SYNCHRO & BREAK

FUNK & SOUL DISCO

POP BALLAD

WALTZ

& TRADUSA16 BEAT8 BEAT

START / STOP TAP TEMPO

BALLROOM

BALLAD

& SHOW

LATIN &

JAZZ &

MEMORY

WORLD

SWING

LOAD

AUTO PLAY CHORD

SPLIT

MAIN

VOLUME

MAX

MIN

DEMO

ONE TOUCH

MODE

POINT

OFF/ON

PLAY

CHORD FINDER

PROGRESSIVE

PIANIST PIANO STYLIST

1 2 1 2 1 1 2 3 4 BEAT

MUSIC STYLE ARRANGER

VARIATION

Insert the song disk into the Disk Drive slot.

On the DISK MENU display, select DIRECT PLAY.

CONTRAST

TRANSPOSE

TEMPO / PROGRAM

SOUND GROUP

GUITAR &

SAX &

ORGAN &

WOODWIND

ACCORDION

SYNTH

PIANO

ORCH

DIGITAL

DRUM KITS

MIXTURES

DRAWBARS

MODERN SIMPLE PIANO TECHNI-CHORD BANK

PIANO

SOUND

EXPLORER

MEMORY

STRINGS

VOCAL

HARPSI BRASS PLAY

MALLET &

WORLD

ORCH PERC

BASS

HELP

OTHER PARTS/TR

MUTE

PAGE

DISPLAY HOLD

EXIT GRAND

UPRIGHT ELECTRIC

SEQUENCER

CHORD STEP REC

CONDUCTOR

LEFT RIGHT 2 RIGHT 1

SET 1 / 5 2 / 6 3 / 7 4 / 8

EASY REC

FAVORITES

PANEL MEMORY

PROGRAM

DISK

MENUS

IN USE

DISK

LOAD

DIGITAL

MULTI

CHORUS REVERB

EFFECT

P.MEM 5-8

2-4

Use a the buttons below the display to

select a song.

• DIRECT PLAY is possible from the following disks:

Standard MIDI File Standard MIDI File with Lyrics DISK ORCHESTRA COLLECTION™ (DOC) PianoDisc™

* All product and company names are trademarks or

registered trademarks of their respective owners.

* DISK ORCHESTRA COLLECTION is a trademark of

the YAMAHA Corporation.

• For SMF songs, use the PLAY AS button to specify a sound arrangement mode.

Press the START button.

• The selected song is played back.

QQTG0701

About the display

A large-size display, easy to operate with excellent readability, is used for displaying various information such as the names of the selected sounds and rhythms etc. and when setting the functions. Let’s take a look.

• The display illustrations shown in this User’s Manual are examples for the sake of clarification; the actual displays on your in strument may differ from the illustrations.

Normal display (HOME PAGE)

This is the kind of information you see on the display during a normal performance.

Selected rhythm

Tempo

Volume of each part

Volume balance

At the bottom half of the normal display, the volume balance of each part is represented in a fader illustration and by a number (0 to 127). You can use the balance buttons below the display to adjust the volumes.

RIGHT 1 part sound

About the display

RIGHT 2 part sound

LEFT part sound

OTHER PARTS/TR

MUTE

APC: AUTO PLAY CHORD RT: RIGHT METR: METRONOME

When setting the volume balance, press the upper button to increase the volume and the lower button to decrease it.

• Hold a button down to scroll the volume quickly.

<Auto accompaniment part> Pressing the OTHER PARTS/TR button will display the auto accompaniment part setting screen.

• DRM: DRUMS ACP: ACCOMP

MUTE

䡲䡲䡲䡲

To mute a part, press both the corresponding upper and lower buttons at the same time.

• The volume display for a muted part is shown as “MUTE.”

• Pressing either balance button for a muted part will cancel the mute function.

OTHER PARTS/TR

䡲䡲䡲䡲

By the pressing the OTHER PARTS/TR button, the screen sequentially switches to the respective volume balance screens of the play part, auto accompaniment part, playback part (1 to 8), and playback part (9 to 16). The playback part (PT) is used to playback recording and song data.

QQTG0701

PAGE

PROGRAM

MENUS

When there are additional parts to the current display, a page number indication, for example PAGE1/2, appears in the upper right corner of the screen. For example, 1/2 indicates that there are two pages of the display, and the current

Setting display

When you select an item from the menu display, the setting display for the item is shown. The buttons to the right, left and/or directly below the display are used to select and adjust the set-

tings. page is page 1. In this case, you can use the upper and lower PAGE buttons, to the right of the balance buttons, to view different “pages” of

Example of setting display: MASTER

䡲䡲䡲䡲

TUNING

the display.

PAG E

About the display

• Press the upper button to view the next page of the display, and the lower button to view the previous page of the display.

• On the last page of the display, pressing the upper button returns to the first page. And conversely, on the first page of the display, pressing the lower button will skip to the last page.

Press the button corresponding to the

MUTE

or ∨ but-

∧

ton on the display to change the value.

• In this manual, this procedure is written as follows: “Use

∧

the

Menu display

and ∨ buttons to adjust the pitch.”

The PROGRAM MENUS button controls multiple functions. Press the button to access its menu display.

TEMPO/PROGRAM

If the TEMPO/PROGRAM indicator is lit while you are using the display to adjust the setting, it indicates that this dial can be used to quickly change the displayed value or setting.

Example of menu display: PROGRAM

䡲䡲䡲䡲

MENUS

Select a function from the menu display by pressing the corresponding button to the left or right of the display indicated by the

䊴

and

䊳

arrows.

• In this manual, the steps describing how to select a function from a menu display are generally abbreviated as follows, for example: “On the PROGRAM MENUS display, select SOUND.”

TEMPO / PROGRAM

• The setting which can be adjusted is highlighted on the display.

EXIT

While the setting display is shown, press this button to go back to the previous display.

DISPLAY HOLD

EXIT

QQTG0701

DISPLAY HOLD

Press this button to turn it on when you wish to maintain the current display. You can keep a display which is normally automatically canceled, for example, or even during a performance, you can monitor information which is not shown on the normal display.

DISPLAY HOLD

• The indicator for this button may flash if the current display is one which is normally automatically canceled.

• If the PROGRAM MENUS button, for example, is pressed, the DISPLAY HOLD mode is canceled.

EXIT

CONTRAST

Press the CONTRAST button and adjust the display's viewability using the the screen.

and ∨ buttons on

∧

• The following display appears.

Use the buttons below the display to select a

language.

Press the OK button.

Press a button on the panel whose explana-

tion you wish to read.

• An explanation of the button’s function is shown on the display.

Press the HELP button again to exit the help

mode.

• Attention display messages and error messages are also shown in the selected language.

About the display

CONTRAST

• When adjusting the CONTRAST, the set value is shown shortly on the display.

HELP

You can find an explanation of each button’s function on the display.

Press the HELP button.

HELP

OTHER PARTS/TR

• The appearance of the display on your instrument may be different from the illustrated display in this manual depending on the region in which your instrument was purchased and the selected display language.

QQTG0701

Favorites

AUTO PLAY CHORD

SPLIT

ONE TOUCH

MAIN

POINT

OFF/ON

PLAY

MODE

VOLUME

MAX

CHORD FINDER

PROGRESSIVE

PIANIST PIANO STYLIST

MIN

1 2 1 2 1 1 2 3 4 BEAT

MUSIC STYLE ARRANGER

VARIATION

DEMO

FADE

APC/SEQUENCER

VOLUME

SOUND

METRONOME

IN OUT

ARRANGER

MAX

SET

OFF

234

FILL IN INTRO & ENDING

SEQUENCER

COUNT

RESET

INTRO

TEMPO / PROGRAM

RHYTHM GROUP

FUNK &

BALLROOM

POP ROCK

SOUL DISCO

POP BALLAD

BALLAD

& SHOW

LATIN &

JAZZ &

WALTZ

MEMORY

WORLD

SWING

& TRADUSA16 BEAT8 BEAT

CONTRAST

LOAD

SYNCHRO & BREAK

START / STOP TAP TEMPO

HELP

OTHER PARTS/TR

TRANSPOSE

MUTE

DISPLAY HOLD

PAGE

SOUND GROUP

GUITAR &

STRINGS

VOCAL

HARPSI BRASS PLAY

MALLET &

BASS

ORCH PERC

WORLD

EXIT GRAND

UPRIGHT ELECTRIC

SAX &

ORGAN &

WOODWIND

ACCORDION

PIANO

ORCH

DIGITAL

MIXTURES

DRAWBARS

DRUM KITS

MODERN SIMPLE PIANO TECHNI-CHORD BANK

PIANO

SEQUENCER

PROGRAM

DISK

EASY

SOUND

MENUS

IN USE

REC

FAVORITES

CONDUCTOR

LEFT RIGHT 2 RIGHT 1

CHORD STEP REC

DIGITAL EFFECT

SET 1 / 5 2 / 6 3 / 7 4 / 8

PANEL MEMORY

DISK

LOAD

MULTI EFFECT

CHORUS REVERB

P.MEM 5-8

SYNTH

EXPLORER

MEMORY

With up to 9 types of sounds, rhythms, functions, etc., you can arrange them to make up your own unique screen pattern.

Press the FAVORITES button to turn it on.

While pressing the SET button, specify where

you wish to paste (put) the item.

FAVORITES

• While the SET button is depressed, the display appears as shown below. Use the buttons to the left and right of the display to specify where you wish to paste the item.

About the display

• The display looks similar to the following.

Repeat steps 3 and 4 to create the display you

want.

• There are nine settable items on the display.

Press the FAVORITES SETTING button.

On the FAVORITES SETTINGS display,

• The display looks similar to the following.

press the OK button.

• Your customized display is stored.

Select the desired item.

∨

• Use the CATEGORY ∧ and gory, and then the ITEM

buttons to specify a cate-

∧

and ∨ buttons to select an

item.

• The MUTE KEYS function silences the sound of the keyboard keys. This is convenient when you wish to pretend to play the keyboard while playing back a recorded performance.

• The PANIC function interrupts the sound, for example, when it fails to cease during a MIDI performance.

Recall a FAVORITES display

䡲䡲䡲䡲

Press the FAVORITES button to turn it on.

Use the buttons to the left and right of the dis-

play to specify the ITEM you wish to recall.

• The FAVORITES settings can be saved to a disk.

QQTG0701

+ 114 hidden pages