PANASONIC SU-R1EB, SU-R1EG User Manual
Operating Instructions
Bedienungsanleitung
Mode d’emploi
Istruzioni per l’uso
Instrucciones de funcionamiento
Betjeningsvejledning
Gebruiksaanwijzing
Bruksanvisning
Käyttöohjeet
Network Audio Control Player
Netzwerkaudio-Vorstufe
Préamplificateur lecteur réseau
Network Audio Control Player
Reproductor Audio en Red con Pre-amplificador
Netværkslydkontrolafspiller
Netwerk Audio Speler
Nätverksspelare med Intergrerat Försteg
Verkkoaudion ohjauslaite
SU-R1
Music is borderless and timeless,
touching people’s hearts across cultures and generations.
Each day the discovery of a truly emotive experience
from an unencountered sound awaits.
Let us take you on your journey to rediscover music.
4
Thank you for purchasing this product.
Please read these instructions carefully before using this product, and save this manual for future use.
∫ Features of this unit
This unit offers the following features:
Technics Digital Link
Technics has minimised the length of the signal path by enclosing the network audio player and input selector, which handle very
weak signals, into the same chassis, and reduced noise entering weak signals as much as possible by using a separate chassis
for the power amplifier, which handles high frequencies and large currents. In addition, Technics’s newly developed signal
transmission interface minimises the degradation of time accuracy and amplitude accuracy that occurs when signals are
transmitted between the network control player and the power amplifier, achieving an ideal amplifier configuration.
Digital Noise Isolation Architecture
Since most digital content storage media are intended for use with PCs, they are not designed with consideration for low noise,
which is critical to pure audio reproduction. To overcome this challenge, this unit employs a thorough measure against jitter and
outstanding noise blocking technology for each of its interfaces, delivering clear and stable sound.
Separated Analogue/Digital Power Supply
A dedicated low-noise R-core transformer with excellent regulation characteristics is provided individually for analogue and for
digital circuit, achieving high quality sound reproduction.
∫ Recommended devices
We recommend using Technics devices (optional) for superior audio quality.
* This product is set to be released in February 2015. (For European Countries)
Sales and Support Information
Customer Communications Centre
≥For customers within the UK: 0844 844 3899
≥For customers within Ireland: 01 289 8333
≥Monday–Friday 9:00 am – 5:00 pm, (Excluding public holidays).
≥For further support on your product, please visit our website: www.panasonic.co.uk
Direct Sales at Panasonic UK
≥
Order accessory and consumable items for your product with ease and confidence by phoning our Customer Communications Centre
Monday–Friday 9:00 am – 5:00 pm, (Excluding public holidays).
≥Or go on line through our Internet Accessory ordering application at www.pas-europe.com.
≥Most major credit and debit cards accepted.
≥All enquiries transactions and distribution facilities are provided directly by Panasonic UK.
≥It couldn’t be simpler!
≥Also available through our Internet is direct shopping for a wide range of finished products. Take a browse on our website for
further details.
Product name Model number
Stereo Power Amplifier SE-R1
Speaker System SB-R1*
(4)
5
English
Safety precautions
Unit
≥ To reduce the risk of fire, electric shock or product damage,
– Do not expose this unit to rain, moisture, dripping or splashing.
– Do not place objects filled with liquids, such as vases, on this unit.
– Use only the recommended accessories.
– Do not remove covers.
– Do not repair this unit by yourself. Refer servicing to qualified service personnel.
– Do not let metal objects fall inside this unit.
– Do not place heavy items on this unit.
AC mains lead
≥ To reduce the risk of fire, electric shock or product damage,
– Ensure that the power supply voltage corresponds to the voltage printed
on this unit.
– Insert the mains plug fully into the socket outlet.
– Do not pull, bend, or place heavy items on the lead.
– Do not handle the plug with wet hands.
– Hold onto the mains plug body when disconnecting the plug.
– Do not use a damaged mains plug or socket outlet.
≥ The mains plug is the disconnecting device.
Install this unit so that the mains plug can be unplugged from the socket
outlet immediately.
Unit
≥ Do not place sources of naked flames, such as lighted candles, on this unit.
≥ This unit may receive radio interference caused by mobile telephones
during use. If such interference occurs, please increase separation between
this unit and the mobile telephone.
≥ This unit is intended for use in tropical climates.
Placement
≥ Place this unit on an even surface.
≥ To reduce the risk of fire, electric shock or product damage,
– Do not install or place this unit in a bookcase, built-in cabinet or in another
confined space. Ensure this unit is well ventilated.
– Do not obstruct this unit’s ventilation openings with newspapers,
tablecloths, curtains, and similar items.
– Do not expose this unit to direct sunlight, high temperatures, high
humidity, and excessive vibration.
≥ Do not lift or carry this unit by holding any of its knobs. Doing so may cause
this unit to fall, resulting in personal injury or malfunction of this unit.
Battery
≥ Danger of explosion if battery is incorrectly replaced. Replace only with the
type recommended by the manufacturer.
≥
Mishandling of batteries can cause electrolyte leakage and may cause a fire.
– Remove the battery if you do not intend to use the remote control for a
long period of time. Store in a cool, dark place.
– Do not heat or expose to flame.
– Do not leave the battery(ies) in a car exposed to direct sunlight for a long
period of time with doors and windows closed.
– Do not take apart or short circuit.
– Do not recharge alkaline or manganese batteries.
– Do not use batteries if the covering has been peeled off.
≥ When disposing of the batteries, please contact your local authorities or
dealer and ask for the correct method of disposal.
NORSK
Produkt
≥ For å redusere faren for brann, elektrisk støt eller skade på apparatet:
– Utsett ikke produktet for regn, fukt, drypping eller sprut.
– Ikke plasser objekter som er fylt med væske, som vaser, på apparatet.
– Bruk kun anbefalt tilbehør.
– Fjern ikke deksler.
– Reparer ikke denne enheten selv, overlat service til kvalifisert servicepersonell.
Vekselstrømnett
≥ Nettstøpselet er trukket ut fra denne enheten.
Installer denne enheten slik at nettstøpselet umiddelbart kan trekkes fra
stikkontakten.
Produkt
≥ Plasser ikke åpen ild, slik som levende lys, oppå apparatet.
≥ Denne enheten er beregnet for bruk i tropiske klimaer.
Plassering
≥ For å redusere faren for brann, elektrisk støt eller skade på apparatet:
– Ikke plasser apparatet i en bokhylle, et innebygget kabinett eller et annet
lukket sted. Pass på at produktet er godt ventilert.
– Apparatets ventilasjonsåpninger må ikke dekkes til med aviser, duker,
gardiner eller lignende.
(For the AC mains plug of three pins)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug for your safety
and convenience.
A 10-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the replacement fuse
has a rating of 10-ampere and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse.
If the plug contains a removable fuse cover you must ensure that it is refitted
when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement cover
is obtained.
A replacement fuse cover can be purchased from your local dealer.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC mains plug (figures A
and B). Confirm the AC mains plug fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse cover.
WAR NING
CAUTION
ADVARSEL
FORSIKTIG
Caution for AC Mains Lead
Disposal of Old Equipment and Batteries
Only for European Union and countries with recycling
systems
These symbols on the products, packaging, and/or
accompanying documents mean that used electrical and
electronic products and batteries must not be mixed with
general household waste.
For proper treatment, recovery and recycling of old
products and used batteries, please take them to
applicable collection points in accordance with your
national legislation.
By disposing of them correctly, you will help to save
valuable resources and prevent any potential negative
effects on human health and the environment.
For more information about collection and recycling,
please contact your local municipality.
Penalties may be applicable for incorrect disposal of this
waste, in accordance with national legislation.
Note for the battery symbol (bottom symbol):
This symbol might be used in combination with a
chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical
involved.
Figure A Figure B
Fuse cover
Figure A Figure B
Fuse
(10 ampere)
Fuse
(10 ampere)
(5)
6
Table of contents
Accessories
≥ Product numbers provided in these operating instructions are correct as of November 2014. These may be subject to change.
≥ Do not use AC mains lead with other equipment.
≥ In Saudi Arabia, please use the moulded three pin mains plug.
Unit care
Pull out the AC mains lead from the outlet before maintenance. Clean this unit with a soft cloth.
≥ When dirt is heavy, wring a wet cloth tightly to wipe the dirt, and then wipe it with a soft cloth.
≥ Do not use solvents including benzine, thinner, alcohol, kitchen detergent, a chemical wiper, etc. This might cause the exterior case to be
deformed or the coating to come off.
Safety precautions ............................................................5
Accessories ....................................................................... 6
Unit care .............................................................................6
Control reference guide....................................................7
Getting started...................................................................9
Basic operations .............................................................13
Network settings .............................................................14
Playing back music files on the DLNA server ..............15
Using iPhone/iPad/iPod ..................................................16
Using AirPlay ...................................................................17
Using USB device............................................................17
Using PC, etc. ..................................................................19
Sound adjustment ...........................................................20
Others ...............................................................................21
Troubleshooting ..............................................................23
Specifications ..................................................................26
About descriptions in these operating instructions
≥Pages to be referred to are indicated as “@ ±±”.
≥The illustrations shown may differ from your unit.
≥Unless otherwise indicated, operations are described using the remote control.
∏ 1 AC mains lead
(K2CT2YY00109)
∏ 1 Remote control
(N2QAYA000095)
∏ 2 Batteries for remote
control
∏ 1 AC mains lead
Except for Switzerland
(K2CQ2YY00132)
∏ 1 AC mains lead
For Switzerland
(K2CS2YY00001)
∫ Using the remote control
Insert the battery so the terminals (i and j)
match those in the remote control.
Point it at the remote control signal sensor on this
unit. (> 7)
≥Keep the batteries out of reach of children to
prevent swallowing.
2
1
R03/LR03, AAA
(Alkaline or manganese batteries)
(6)
7
English
Control reference guide
∫ Front
1 Unit on/off button [ ]
Use this button to turn the unit on and off.
[ ] (off): The unit is off.
[ ] (on): The unit is on.
≥ The unit is still using a small amount of power in off mode. Off
mode uses less power. (> 26)
2
Port for iPhone/iPad/iPod and USB devices (> 16, 17)
3 Power indicator
The colour of the indicator changes according to the
status of this unit.
4 Remote control signal sensor
Distance: Within approx. 7 m directly in front
Angle: Approx. 30o left and right
5 Volume knob
Adjust the volume of the headphones or the SE-R1. (
>
13)
≥ It is not possible to adjust the volume of devices connected to
the analogue or digital audio output terminals.
≥ The speed at which the volume is adjusted varies depending
on how fast you turn the knob.
6 Display
7 Basic control buttons
≥ Press and hold [RETURN] on the unit to display the HOME
menu. (> 13)
8 Headphones jack
For connecting a headphone plug.
≥ Excessive sound pressure from earphones and headphones
can cause hearing loss.
≥ Listening at full volume for long periods may damage the
user’s ears.
9 Multi-control knob (> 13)
≥Turn this knob clockwise and anticlockwise to switch
the input source, scroll through items, and skip during
playback.
≥To set an item, press the knob; to enter the menu
screen, press and hold it.
∫ Rear
: Analogue audio output terminals [UNBALANCED]
(> 10)
; Analogue audio input terminals [LINE1]/[LINE2]
(> 10)
< System terminal [Technics Digital Link OUT] (> 9)
= Product identification marking
The model number is indicated.
> Analogue audio output terminal [BALANCED] (> 10)
? Digital audio output terminal [AES/EBU] (> 11)
@ Digital audio output terminal [COAXIAL] (> 11)
A Digital audio output terminal [OPTICAL] (> 11)
B Digital audio input terminal [AES/EBU] (> 11 )
C Digital audio input terminals
[COAXIAL1]/[COAXIAL2]/[COAXIAL3] (> 11)
D Digital audio input terminal [
OPTICAL
] (> 11)
E LAN port [LAN] (> 14)
F Digital audio input terminal [PC] (> 19)
For connecting to a PC, etc.
G AC IN terminal [AC IN T] (> 12)
This unit
Blue The unit is on.
Red The unit is in standby mode.
1/; Play/Pause
RETURN Return to the previous display
(7)
8
1 [Í]: Standby/on switch
Press to switch the unit from on to standby mode or vice versa.
In standby mode, the unit is still consuming a small amount of
power.
≥ The remote control do not operate when the power indicator is
off.
2 Select the input source
3 [HOME]: Display HOME menu
4 [3, 4, 2, 1]/[OK]: Selection/OK
5 [MENU]: Enter menu (> 21)
6 [DIRECT]: Turn on/off Direct mode (> 20)
7 [LAPC]: Measure the characteristics of the amplifier
and correct its output (> 12)
8 [MUTE]: Mute the sound of the headphones or the
SE-R1 (> 13)
9 [N INPUT O]: Select the input source
: [r VOL s]: Adjust the volume of the headphones or
the SE-R1 (> 13)
≥ It is not possible to adjust the volume of devices connected to
the analogue or digital audio output terminals.
; Numeric buttons, etc.
≥ To select a 2-digit number
Example:
16: [S10] > [1] > [6]
≥ To select a 4-digit number
Example:
1234: [S10] > [S10] > [S10] > [1] > [2] > [3] > [4]
≥ [CLEAR]: Clear the entered value.
< [SETUP]: Enter setup menu (> 14, 20, 21, 22, 23)
= [DIMMER]: Adjust the brightness of the display, etc.
(> 13)
> [INFO]: View content information
Press this button to display the track, artist, and album names,
file type, sampling frequency, and other information.
? [RETURN]: Return to the previous display
@ [RE-MASTER]: Turn on/off Re-master (> 20)
A Basic playback control buttons
B [SLEEP]: Set the sleep timer (> 21)
Remote control
DIRECT
LAPC
㻌
RE- MASTER
㻌
AES
㻌
COAX
㻌
LINE1
㻌
OPT
㻌
USB
㻌
PC
㻌
LAN
㻌
PGM
㻌
RAND
㻌
LINE2
㻌
MENU
(8)
9
English
Getting started
≥Turn off all equipment before connection and read the appropriate operating instructions.
≥Do not connect the AC mains lead until all other connections are complete.
≥Insert the plugs of the cables to be connected all the way in.
≥Do not bend cables at sharp angles.
≥You can output digital audio signals from this unit and play back music.
≥You can operate this unit and the SE-R1 simultaneously with ease on the remote control. (> 23)
≥ Use category 7 or above straight LAN cables (STP) when connecting to peripheral devices.
≥ We recommend using cables with a length of 3 m or less.
≥ The system terminal and the LAN port are identical in shape. Be careful not to mistakenly connect either of the cables for system control
connected to the system terminal of the SE-R1 to the LAN port.
≥ Do not connect an SE-R1 in any other way than described above.
∫ Polarity of the balanced audio terminals
Insert the cable pins so that their polarities match the polarities of the holes.
∫ To disconnect the balanced cables
Pull out the cables while pressing [PUSH] at the top of the terminals.
System control connection to an SE-R1
SE-R1
This unit
(rear)
Cable for system control
(not supplied)
Cable for system control
(not supplied)
(9)
10
You can output analogue audio signals from this unit and play back music.
* We recommend using cables with a length of 3 m or less.
You can input analogue audio signals to this unit and play back music.
Connecting to analogue audio input devices
e.g.,
Pre-amplifier with balanced input terminals Pre-amplifier with unbalanced input terminals
Connecting to analogue audio output devices
e.g.,
Player, etc. Player, etc.
This unit
(rear)
XLR cable* (not supplied)
Audio cable (not supplied)
This unit
(rear)
Audio cable (not supplied) Audio cable (not supplied)
(10)
11
English
You can output digital audio signals from this unit and play back music.
* We recommend using cables with a length of 3 m or less.
You can input digital audio signals to this unit and play back music.
* We recommend using cables with a length of 3 m or less.
≥ The digital audio input terminals of this unit can only detect linear PCM signals. For details, refer to the operating instructions of the device.
Connecting to digital audio input devices
Device that supports
AES/EBU input
(pre-amplifier, etc.)
Device that supports
coaxial digital input
(pre-amplifier, etc.)
Device that supports
optical digital input
(pre-amplifier, etc.)
Connecting to digital audio output devices
Device that supports
AES/EBU output
(player, etc.)
Device that supports
coaxial digital output
(player, etc.)
Device that supports
optical digital output
(player, etc.)
This unit
(rear)
AES/EBU cable*
(not supplied)
Coaxial digital cable
(not supplied)
e.g.,
Optical digital audio cable
(not supplied)
This unit
(rear)
AES/EBU cable*
(not supplied)
Coaxial digital cable
(not supplied)
e.g.,
Optical digital audio
cable
(not supplied)
(11)
12
Connect only after all other connections are completed.
∫ To disconnect the AC mains lead from this unit
Pull out the AC mains lead while pressing the top and bottom sides of the connector.
≥ Although the AC power switch is in the [ ] position, the unit is not completely disconnected from the mains. Remove the plug from the
main electrical outlet if you will not be using the unit for an extended period of time. Place the unit so the plug can be easily removed.
NORSK
≥ Selv om hovedbryteren er i stilling [ ], er ikke enheten koblet fra strømnettet. Koble kontakten fra strømuttaket hvis du ikke skal bruke
enheten på en stund. Plasser enheten slik at det er lett å dra ut kontakten.
If the SE-R1 is connected to this unit via the system control function, you can operate using the remote control of this unit.
Press and hold [LAPC] until the LAPC indicator on the SE-R1 starts to blink.
≥The SE-R1 will start measuring the characteristics of the amplifier if it is connected to the speakers.
≥ For information on the operations of the SE-R1, please also refer to its operating instructions.
AC mains lead connection
TENTATIVE
AC mains lead
(supplied)
To a household mains socket
This unit
(rear)
DO DO NOT
Measuring the characteristics of the amplifier and correcting its
output
(12)
13
English
Basic operations
Preparation
≥Prepare the music that you want to play back.
≥Turn on the connected device (amplifier, etc.) and lower its
volume.
1 Press the unit on/off button to the [ ]
position.
≥The power indicator lights up in blue.
2 Press any of the input source buttons. (> 8)
3 Press [3, 4] to select an item and then
press [OK].
≥If there are any other items, repeat this step.
4 Start play.
∫ Using the multi-control knob
1 Press and hold [RETURN] on the unit to display the
HOME menu.
2 Turn the multi-control knob clockwise and anticlockwise
to select an input source, and then press the knob.
3 Turn the multi-control knob clockwise and anticlockwise
to select an item, and then press the knob.
4 Start play.
Connect this unit and the SE-R1 with cables for system
control. (> 23)
∫ Adjusting the volume
Press [r VOL s].
≥ -- dB (min), -99.0 dB to 0 dB (max)
≥ When adjusting the volume of the SE-R1, set the input selector
knob on the SE-R1 to [DIGITAL].
∫ Muting the sound
Press [MUTE].
≥ “ ” is displayed.
≥ Press again to cancel. “ ” is also cancelled when the volume is
adjusted or the unit is turned off.
The brightness of this unit’s display and the power indicator
can be changed.
Press [DIMMER] repeatedly.
≥ When the display is turned off, it will light up only when you
operate this unit.
Before the display turns off again, “Display Off” will be displayed
for a few seconds.
If you install the dedicated app “Technics Music App” (free of
charge) on your tablet/smartphone, you can control this unit
and the SE-R1 using a wide variety of functions.
For details, visit:
www.technics.com/support/
LAN
Connects this unit to a network and
plays back music over it. (> 15)
AES
Plays back music from digital audio
output devices.
≥ Press [COAX] to select
“COAX1”/“COAX2”/“COAX3”.
COAX
OPT
USB
Plays back music stored on a USB
device or an iPhone/iPad/iPod.
(> 16, 17, 18)
PC
Plays back music stored on a PC,
etc. (> 19)
LINE1/LINE2
Plays back music from analogue
audio output devices.
Adjusting the volume of the
headphones or the SE-R1
Display brightness
Operations using the
dedicated app “Technics
Music App”
(13)
14
Network settings
You can stream music from an iOS device
(iPhone/iPad/iPod), an Android™ device or a PC
(Mac/Windows) to this unit by using the AirPlay or DLNA
feature. (> 15, 17)
To use these features, this unit must join the same network
as the AirPlay compatible device or the DLNA compatible
device.
Normally, just connecting a LAN cable will complete the
setup.
A: LAN cable (not supplied)
1 Disconnect the AC mains lead.
2 Connect this unit to a broadband router, etc.
using a LAN cable.
3 Connect the AC mains lead to this unit, and
press the unit on/off button to the [ ]
position. (> 12)
You can change this unit’s name on the network (Friendly
Name), and use specific IP address, subnet mask, default
gateway, primary DNS, etc.
≥ Do not play back music while changing these settings.
1 Press [SETUP].
2 Press [3, 4] repeatedly to select “Network” and then
press [OK].
3 Select and input the details.
4 Press [OK] to apply the settings.
5 Press [RETURN] repeatedly to exit the settings.
6 Press [Í] to turn the unit to standby mode.
≥ Wait until “Please Wait” disappears.
7 Perform “Wired LAN connection”. (> left)
≥ Use category 7 or above straight LAN cables (STP) when
connecting to peripheral devices.
≥ The LAN port and the system terminal are identical in shape. Be
careful not to mistakenly connect the LAN cable connected to
another device, such as a broadband router, to the system
terminal.
≥ Inserting any cable other than a LAN cable in the LAN port can
damage the unit.
≥ If you change the network settings immediately after turning on
this unit, it may take some time until the changes are applied.
Wired LAN connection
This unit
(rear)
PC, etc.
Broadband router, etc.
To make network-related
settings
(14)
15
English
Playing back music files on the DLNA server
You can share music files stored in the DLNA Certified media
server (PC, smartphone, etc.) connected to your home
network, and enjoy the contents with this unit.
≥ About supported format, refer to “File format” (@ 28)
Preparation
≥Complete the network settings. (> 14)
≥Connect the device to be used to the same network as this
unit.
≥Add the contents and folder to the libraries of the Windows
Media
®
player 11 or 12, or a smartphone, etc.
– Playlist of Windows Media
®
player can play back only the
contents that are stored in the libraries.
– To use Windows Media
®
Player for streaming, you need to
configure it in advance.
You can play back music stored on the DLNA server on this
unit (DMP—Digital Media Player) by controlling the DLNA
server with this unit.
1 Press [LAN].
≥The server selection screen will be displayed.
2 Press [3, 4] to select a DLNA server on the
network, and then press [OK].
≥The folder/content selection screen will be displayed.
≥Folders/content may be displayed in different order
from the order on the server, depending on its
specifications.
3 Press [3, 4] to select an item and then
press [OK].
≥If there are any other items, repeat this step.
Operations on the remote control
∫ Random repeat playback
Press [RND].
Each time you press the button:
∫ Repeat playback
Press [`].
Each time you press the button:
By controlling a DMC (Digital Media Controller) compatible
device, you can play back music stored on the DLNA server
on this unit (DMR—Digital Media Renderer).
1 Press the unit on/off button to the [ ]
position.
2 Operate the DMC compatible device and
connect to this unit.
≥The device name of this unit will be displayed as
“Technics SU-R1 _ _ _ _ _ _”*
1, 2
.
≥For details on how to use DMC compatible devices,
refer to the operating instructions of the devices or the
software.
≥ You cannot use random repeat playback in combination with other
playback modes.
≥ When you operate DMC, playback of other audio sources will stop
and DLNA output will have priority.
≥ Depending on the contents and the connected equipment,
operations or playback may not be possible.
*1 “ _ ” stands for a digit that is unique to each set.
*2 The device name can be changed from “To make network-
related settings”. (> 14)
Playing back content stored
on the DLNA server by
controlling it from this unit
Stop Press [∫].
Pause
Press [1/;].
≥ Press again to restart play.
Skip
Press [:] or [9] to skip track.
≥ If you press either of these buttons during
pause, playback will restart.
Search
During play or pause, press and hold
[6] or [5].
On
All tracks in a folder are repeated
randomly.
≥ “RND `” is displayed.
Off Turns off random repeat mode.
1-Track
Only plays the selected track.
≥ “1 `” is displayed.
All
All tracks in a folder are repeated.
≥ “`” is displayed.
Off Turns off repeat mode.
Playing back content stored
on the DLNA server by
controlling it from a DMC
(15)
16
Using iPhone/iPad/iPod
Connect your iPhone/iPad/iPod, and you can play back
music stored on iPhone/iPad/iPod or charge
iPhone/iPad/iPod.
∫ Compatible iPhone/iPad/iPod
(as of September 2014)
≥ Compatibility depends on the software version. Update your
iPhone/iPad/iPod to the latest software before using it with this
unit.
≥ Please be aware that Panasonic accepts no responsibility for the
loss of data and/or information.
≥ Do not connect the following models to the port:
– iPod classic, iPod [4th (colour display), and 5th (video)
generation], iPod nano (1st generation)
Unexpected behaviour may occur.
≥ Operation results may vary depending on the iPhone/iPad/iPod
models.
When connecting an iPhone/iPad/iPod, use the dedicated
USB cable (not supplied).
1 Connect iPhone/iPad/iPod to the unit.
2 Press [USB].
3 Start play.
Operations on the remote control
≥ It may be necessary to select the album, artist, etc. on the
iPhone/iPad/iPod.
≥ Depending on the iOS version, this function may not be available.
During unit on, charging starts when an iPhone/iPad/iPod is
connected to this unit.
≥ Charging is not possible when this unit is turned off.
≥ Make sure the unit is turned on when you start charging.
– When charging an iPhone/iPad/iPod whose battery is depleted,
do not turn this unit to standby mode until the iPhone/iPad/iPod
becomes operational.
≥ Check the iPhone/iPad/iPod to see if the battery is fully charged.
Once fully charged, remove the iPhone/iPad/iPod.
≥ Charging stops when the battery is fully charged. The battery will
deplete naturally.
iPhone 6 Plus / iPhone 6 / iPhone 5s / iPhone 5c /
iPhone 5 / iPhone 4s / iPhone 4 / iPhone 3GS /
iPhone 3G
iPad Air / iPad (3rd and 4th generation) / iPad 2 / iPad /
iPad mini with Retina display / iPad mini
iPod touch (2nd through 5th generation)
iPod nano (3rd through 7th generation)
Connecting an
iPhone/iPad/iPod
USB cable
(not supplied)
e.g.,
This unit
(front)
iPhone, etc.
Listening to music stored on
an iPhone/iPad/iPod
Stop Press [∫].
Pause
Press [1/;].
≥ Press again to restart play.
Skip Press [:] or [9] to skip track.
Search
During play or pause, press and hold
[6] or [5].
Charging an iPhone/iPad/iPod
(16)
17
English
Using AirPlay
AirPlay works with iPhone, iPad, and iPod touch with iOS
4.3.3 or later, Mac with OS X Mountain Lion or later, and PC
with iTunes 10.2.2 or later.
Preparation
≥Complete the network settings. (> 14)
≥Connect the iOS device or PC to the same network as this
unit.
1 [iOS_device] : Start the “Music” (or iPod) app.
[PC] : Start “iTunes”.
2 Select “Technics SU-R1 _ _ _ _ _ _”*
1, 2
from
the AirPlay icon.
≥Check the volume settings before starting the playback.
(When AirPlay is used for the first time, the volume may
be output at the maximum setting.)
3 Start play.
≥The playback will start with a slight delay.
Operations on the remote control
≥ Playback of other audio sources will stop and AirPlay output will
have priority.
≥ Volume changes on the iOS device or iTunes will be applied to this
unit. (Refer to the iTunes Help for the required settings in iTunes.)
≥ With some iOS and iTunes versions, it may not be possible to
restart the AirPlay playback if the selector is changed or the unit is
turned off, during the AirPlay playback.
In this case, select a different device from the AirPlay icon of the
Music app or iTunes and then re-select this unit as the output
speakers.
≥ AirPlay will not work when playing back videos on iTunes.
*1 “ _ ” stands for a digit that is unique to each set.
*2 The device name can be changed from “To make network-
related settings”. (> 14)
Using USB device
You can play back music stored on a USB device.
≥ This unit does not guarantee connection with all USB devices.
≥ FAT16 and FAT32 file systems are supported.
≥ This unit supports USB 2.0 high speed.
≥ USB devices may not be recognised by this unit when connected
using the following:
– a USB hub
– a USB extension cable
≥ It is not possible to use USB card reader/writers.
≥ This unit cannot record music to a USB device.
≥ About supported format, refer to “File format” (@ 28)
1 Connect a USB device to the unit.
2 Press [USB].
3 Press [3, 4] to select an item and then
press [OK].
≥If there are any other items, repeat this step.
Operations on the remote control
Listening to music with AirPlay
Stop Press [∫].
Pause
Press [1/;].
≥ Press again to restart play.
Skip Press [:] or [9] to skip track.
Listening to music stored on a
USB device
Stop Press [∫].
Pause
Press [1/;].
≥ Press again to restart play.
Skip
Press [:] or [9] to skip track.
≥ If you press either of these buttons during
pause, playback will restart.
Search
During play or pause, press and hold
[6] or [5].
≥ This operation may not be available for
some formats.
e.g.,
This unit
(front)
USB device
(17)
18
∫ Random repeat playback
Press [RND].
Each time you press the button:
∫ Repeat playback
Press [`].
Each time you press the button:
≥ You cannot use random repeat playback in combination with other
playback modes.
≥ You can use repeat playback in combination with programme
playback.
This function allows you to programme up to 24 tracks.
Preparation
≥It is not possible to programme tracks by moving folders.
Move all the tracks you want to programme to a single
folder in advance.
1 Press [PGM] in the stop mode.
≥“Program Mode” screen will be displayed.
2 Press [OK] to display the programming
screen.
3 Press [3, 4] to select the desired track.
4 Press [OK].
≥Do steps 3 through 4 again to programme other tracks.
5 Press [1/;] to start playback.
≥To return to the “Program Mode” screen, press [∫].
Operations on the remote control
≥ Programmed content is maintained as long as the input source is
set to “USB”.
≥ The programme memory will be cleared:
– When the USB device is disconnected.
– When the unit is turned to standby or off mode.
≥ You can use programme playback in combination with repeat
playback.
On
All tracks in a folder are repeated
randomly.
≥ “RND `” is displayed.
Off Turns off random repeat mode.
1-Track
Only plays the selected track.
≥ “1 `” is displayed.
All
All tracks in a folder are repeated.
≥ “`” is displayed.
Off Turns off repeat mode.
Programme playback
Stop
Press [∫].
≥ Programmed content is maintained.
Check the
programmed
order
Press [2, 1] in the stop mode.
≥ To return to the “Program Mode” screen,
press [RETURN].
Add tracks Do steps 3 through 4 in the stop mode.
Clear the last
track
Press [CLEAR] in the stop mode.
≥ It is not possible to select and clear the
desired programmed track.
Cancel
programme
mode
1 Press [PGM] in the stop mode.
≥ “Program Clear” is shown.
2 Press [3, 4] to select “Yes” and
then press [OK].
≥ The programme memory will be
cleared.
(18)
19
English
Using PC, etc.
You can connect the digital audio input terminal [PC] and a
PC, etc. with a USB cable and play back music on the PC,
etc. with this unit.
≥ About supported format, refer to “File format” (@ 28)
(as of November 2014)
1 Disconnect the AC mains lead.
2 Connect this unit and a PC, etc.
3 Connect the AC mains lead to this unit, and
press the unit on/off button to the [ ]
position. (> 12)
4 Press [PC].
5 Operate the device to be used for playback.
Connecting to a PC
Before connecting to a PC, follow the steps below.
≥ Refer to the following for the recommend OS versions for your
PC:
– Windows Vista, Windows 7, Windows 8, Windows 8.1
– OS X 10.7, 10.8, 10.9, 10.10
1 Download and install the dedicated driver to the PC.
(Only for Windows OS)
Download and install the driver from the website below.
www.technics.com/support/
2 Download and install the dedicated app “Technics
Audio Player” (free of charge) on your PC. (Common
to both Windows OS and OS X)
Download and install the app from the website below.
www.technics.com/support/
Listening to audio from a PC,
etc.
USB
TENTATIVE
USB 2.0 cable
(not supplied)
This unit
(rear)
e.g.,
PC, etc.
Type A
Typ e B
(19)
20
Sound adjustment
The following sound effects can be added to the audio output.
Re-mastering expands the playback band and achieves a
higher bit depth to reproduce natural and expansive sound
close to original music.
≥ The factory default is “Off”.
Press [RE-MASTER] to select “On”/“Off”.
This unit can transmit input signals without passing them
through its digital signal processor (DSP), via the shortest
possible path. This enables faithful and high quality
reproduction of original sound.
≥ The factory default is “Off”.
Press [DIRECT] to select “On”/“Off”.
You can set an upper limit on the output sampling frequency
range. Please note that the range that can be processed
differs depending on the amplifier or D/A converter. For
details, refer to the operating instructions of the connected
device.
≥ The factory default is “32kHz-192kHz”.
Preparation
≥Set “Digital Output” to “On”.
1 Press [SETUP].
2 Press [3, 4] repeatedly to select “D.Output
fs” and then press [OK].
3 Press [3, 4] to select an item and then
press [OK].
≥You can select a sampling frequency of 96 kHz or
192 kHz.
If audio distortion occurs when using the analogue audio
input terminals, set the attenuator to “On”.
≥ The factory default is “Off”.
1 Press [SETUP].
2 Press [3, 4] repeatedly to select
“Attenuator” and then press [OK].
3 Press [3, 4] to select “LINE1” or “LINE2”.
4 Press [2, 1] to select “On” and then press
[OK].
Disabling the audio output of unused terminals minimises
noise and allows playback in higher audio quality.
≥ The factory default is “On”.
1 Press [SETUP].
To disable the digital audio output:
Press [3, 4] repeatedly to select “Digital Output” and
then press [OK].
To disable the analogue audio output:
Press [3, 4] repeatedly to select “Analog Output” and
then press [OK].
To disable the system terminal output (SE-R1):
Press [3, 4] repeatedly to select “Digital Link” and then
press [OK].
2 Press [3, 4] to select “Off” and then press
[OK].
≥To enable the output again, select “On”.
≥ Depending on the music source that you play back, the applied
setting may be less effective.
≥ Depending on the music source that you play back, it may not be
possible to achieve the desired audio quality and sound field
effect. In such cases, turn off this function.
≥ Both Re-master and Direct mode cannot be set to “On”.
≥ When “Digital Output”, “Analog Output” or “Digital Link” is set to
“Off”, no sound will be output.
≥ When a headphone plug is connected, even if “Analog Output” is
set to “Off”, it is not possible to disable the analogue audio output.
≥ It may take some time to output audio when you have adjusted the
audio quality.
Listening to more natural-
sounding audio (Re-master)
Direct mode
Setting the sampling
frequency
Minimising audio distortion
Disabling audio output
(20)
21
English
Others
The sleep timer can turn the unit off after a set time.
Press [SLEEP].
Each time you press the button:
“30 minutes” "# “60 minutes” "# “90 minutes” "# “120 minutes”
^"""""""""""""" “Off” !"""""""""""""n
≥ You can also set the sleep timer by selecting “SLEEP” using the
menu screen.
This unit is designed to conserve its power consumption and
save energy. The unit will turn to standby mode automatically
if there is no sound and it is not being used for approximately
20 minutes.
≥ The factory default is “On”.
To cancel this function
1 Press [SETUP].
2 Press [3, 4] repeatedly to select
“AUTO OFF” and then press [OK].
3 Press [3, 4] to select “Off” and then press
[OK].
≥To enable the output again, select “On”.
≥ The auto off function works unless you turn it off, even if you turn
off and on this unit.
≥ If “Network Standby” is set to “On”, this function will also be set to
“On”. To change the setting, set “Network Standby” to “Off”. (> 21)
This unit can turn on automatically from standby mode when
this unit is selected as the AirPlay/DLNA player.
≥ The factory default is “Off”.
1 Press [SETUP].
2 Press [3, 4] repeatedly to select
“Network Standby” and then press [OK].
3 Press [3, 4] to select “On” and then press
[OK].
≥ If this function is set to “On” the standby power consumption will
increase.
Sleep timer
Auto off function
Network standby
(21)
22
Occasionally, Panasonic may release updated firmware for
this unit that may add or improve the way a feature operates.
These updates are available free of charge.
Preparation
≥Connect this unit to the network. (> 14)
– Make sure that the network is connected to the Internet.
1 Press [SETUP].
2 Press [3, 4] repeatedly to select “F/W
Update” and then press [OK].
3 Press [3, 4] to select “Yes” and then press
[OK].
≥When the update has finished successfully, “Success” is
displayed.
4 Disconnect the AC mains lead and
reconnect it after 3 minutes.
≥ If there are no updates, “No Need” is displayed after step 3.
≥ Downloading will require several minutes. It may take longer or
may not work properly depending on the connection environment.
∫ Checking the firmware version
1 Press [SETUP].
2 Press [3, 4] repeatedly to select “F/W Version” and
then press [OK].
≥ Press [OK] to exit.
When other equipment responds to the supplied remote
control, change the remote control code.
≥ The factory default is “Mode 1”.
Point the remote control at this unit, and press
and hold [OK] and the numeric button for at least
4 seconds.
≥When the remote control code is changed, the new code
will appear on the display for a few seconds.
You can change the character encoding of track names,
artist names and other information when they are not
displayed as they should be.
≥ The factory default is “Type 1( 日本 )”.
1 Press [SETUP].
2 Press [3, 4] repeatedly to select “E Asian
Character” and then press [OK].
3 Press [3, 4] to select
“Type 1( 日本 )”/“Type 2( 简体字 )” and then
press [OK].
Firmware updates
Do not disconnect the AC mains lead or press the unit
on/off button to the [ ] position while one of the
following messages is displayed.
“Linking” or “Updating”
≥ During the update process, no other operations can be
performed.
Remote control code
[OK] + [1] Set the code to “Mode 1”
[OK] + [2] Set the code to “Mode 2”
Changing the character
encoding
Type 1( 日本 )
Priority is given to Japanese.
Type 2( 简体字 )
Priority is given to Chinese
(Simplified).
(22)
23
English
You can operate this unit and the SE-R1 simultaneously with
ease on the remote control.
Preparation
1 Connect this unit and the SE-R1 with cables for system
control. (> 9)
2 Set the input selector knob on the SE-R1 to [DIGITAL].
3 Press the unit on/off button on this unit and the SE-R1 to
the [ ] position.
4 If “Digital Link” is set to “Off”, change the setting to “On”.
∫ Switching this unit and the SE-R1 to
on/standby simultaneously
≥If you point the remote control at this unit and press [Í]
when this unit and the SE-R1 are in standby mode, this unit
and the SE-R1 will be turned on simultaneously.
≥If you point the remote control at this unit and press [Í]
when this unit and the SE-R1 are turned on, this unit and
the SE-R1 will simultaneously enter standby mode.
∫ Measuring the characteristics of the
amplifier and correcting its output
You can operate using the remote control of this unit.
∫ Adjusting Bass/Middle/Treble
You can adjust the tone of the SE-R1 with this unit. Each
tonal range (Bass/Middle/Treble) can be adjusted.
1 Press [SETUP].
2 Press [3, 4] repeatedly to select “Tone Control” and
then press [OK].
3 Press [3, 4] to select “On (adjustment)” and then press
[OK].
4 Press [3, 4] to select “BASS” (Bass), “MID” (Middle) or
“TREBLE” (Treble).
5 Press [2, 1] to adjust the level and then press [OK].
≥ Each level can be adjusted between “s10” and “r10”.
≥ For information on the operations of the SE-R1, please also refer
to its operating instructions.
Troubleshooting
Before requesting service, make the following checks. If you
are uncertain about some of the check points, or if the
solutions indicated in the following guide does not resolve
the issue, then consult your dealer for instructions.
Heat buildup of this unit.
≥This unit becomes warm when used for a long time. This is
not a malfunction.
Do you have the latest firmware installed?
≥Panasonic is constantly improving the unit’s firmware to
ensure that our customers are enjoying the latest
technology. (> 22)
A “humming” sound can be heard during
playback.
≥An AC mains lead or fluorescent light is near the cables.
Keep other appliances and cords away from the cables of
this unit.
No sound.
≥Check the volume of the connected device (amplifier, etc.).
≥Check to see if the cable connections to the input and
output terminals are incorrect. If this is the case, turn off
this unit and reconnect the cables correctly.
≥Check to see if the correct input source is selected.
≥Insert the plugs of the cables to be connected all the way
in.
≥When “Digital Output”, “Analog Output” or “Digital Link” is
set to “Off”, no sound will be output. Change the setting of
the output terminal to be used to “On”. (> 20)
≥Playback of multi-channel content is not supported.
≥The digital audio input terminals of this unit can only detect
linear PCM signals. For details, refer to the operating
instructions of the device.
Using the system control
function
To return all settings to the factory defaults
When the following situations occur, reset the memory:
≥ There is no response when buttons are pressed.
≥ You want to clear and reset the memory contents.
1 Press [SETUP].
2 Press [3, 4] repeatedly to select “Initialization” and
then press [OK].
3 Press [3, 4] to select “Yes” and then press [OK].
4 Press [3, 4] to select “Yes” and then press [OK]
again.
General
(23)
24
The sound is interrupted.
≥Depending on your environment, the audio may be
interrupted during playback. Check the operating
instructions of the connected device and the connection to
the device.
Playback does not start.
≥Depending on your environment or connected devices, it
may take some time.
The system control function is not working.
≥Connect the cables to the matching LR terminals on this
unit and the SE-R1.
The unit turns off automatically.
≥Is the auto off function turned on? (> 21)
Cannot connect to the network.
≥Confirm the network connection and settings. (> 14)
Cannot connect to the unit.
≥Make sure that the multicast function on the wireless router
is enabled.
≥Make sure that the device and the unit are connected to
the same network. (> 14)
≥Reconnect the compatible device to the network and then
connect to this unit again.
≥Set “Network Standby” to “Off” (> 21), turn this unit off and
on, and then connect to this unit again.
Playback does not start.
The sound is interrupted.
≥Simultaneous use with other 2.4 GHz devices, such as
microwaves, cordless telephones, etc., may result in
connection interruptions.
Increase the distance between the wireless router and
these devices.
≥If several wireless devices are simultaneously using the
same wireless network as this unit, try turning off the other
devices or reducing their wireless network usage.
≥If the playback stops, check the playback status on the
device.
Cannot operate.
≥Select “USB” as the input source.
≥Check that the iPhone/iPad/iPod is connected properly.
≥Connect the iPhone/iPad/iPod again or try to restart the
iPhone/iPad/iPod.
≥The battery of the iPhone/iPad/iPod is depleted. Charge
the iPhone/iPad/iPod, and then operate again.
iPhone/iPad/iPod does not charge.
≥Make sure the unit is turned on when you start charging.
– When charging an iPhone/iPad/iPod whose battery is depleted,
do not turn this unit to standby mode until the iPhone/iPad/iPod
becomes operational.
The USB drive or its contents cannot be read.
≥The USB drive format or its contents is/are not compatible
with the unit. (> 28)
No response when [1/;] is pressed.
≥Disconnect the USB device and then reconnect it.
Alternatively, turn the unit off and on again.
Slow operation of the USB flash drive.
≥Large file size or high memory USB flash drive takes longer
time to read.
The PC does not recognise this unit.
≥Check your operating environment. (> 19)
≥Restart the PC, turn off and on this unit, and then
reconnect the USB cable.
≥Use another USB port of the connected PC.
≥Install the dedicated driver if using a PC with Windows.
Cannot find music files stored on the PC.
≥When you play back music files over a network, those that
are not registered to its network server are not displayed.
For details, refer to the operating instructions for your
server.
AirPlay/DLNA
iPhone/iPad/iPod
USB
PC
(24)
25
English
The remote control does not work properly.
≥To avoid interference, please do not put any objects in front
of signal sensor. (> 7)
≥Change the remote control code if other products react to
this remote control. (> 22)
The following messages or service numbers may appear
on the unit’s display.
“AUTO OFF”
≥The unit has been left unused for about 20 minutes and will
shut down within a minute. Press any button to cancel it.
“Checking Connection”
≥The unit is checking the connected iPhone/iPad/iPod or a
USB device.
“Download Error”
≥The firmware download has failed. Press any button to exit.
Please try again later.
≥The server cannot be found. Press any button to exit. Make
sure that the network is connected to the Internet.
“Empty”
≥The selected folder is empty. Move tracks into the folder
and retry the operation.
≥The server is not found on the network. Check to see if the
server is connected to the same network as this unit, and
retry the connection to this unit. (> 15, 17)
“Error”
≥Incorrect operation is performed. Read the instructions and
try again.
“F” (“ ” stands for a number.)
≥There is a problem with this unit.
– Is the volume extremely high?
If so, lower the volume.
– Is this unit placed in an extremely hot place?
If so, move this unit to a cooler place and wait a few moments
and then try to turn it on again.
If the problem persists, write down the displayed number,
disconnect the AC mains lead and consult your dealer.
“No Network Connection”
≥This unit is not connected to the network.
Check the network connection. (> 14)
“Not Conditional”
≥The function you have tried to use is not available with the
current settings. Check the steps and settings.
“Over Flow”
≥The audio from the analogue audio input terminal in use is
distorted. Select “Attenuator”, and change the setting for
the analogue audio input terminal in use to “On”. (> 20)
“PGM Full”
≥The number of programmed tracks is more than 24.
“Please Wait”
≥This is displayed, for example, when this unit is turned
on/off. (For up to 1 minute and 30 seconds)
“Remote ” (“ ” stands for a number.)
≥The remote control and this unit are using different codes.
Change the code on the remote control.
– When “Remote 1” is displayed, press and hold [OK] and [1] for
at least 4 seconds.
– When “Remote 2” is displayed, press and hold [OK] and [2] for
at least 4 seconds.
“Searching”
≥The unit is checking the DLNA server on the network.
“Unlocked”
≥“PC”, “AES”, “COAX1”, “COAX2”, “COAX3” or “OPT” is
selected, but no device is connected. Check the
connection with the device. (> 10, 11)
≥Audio signals, such as sampling frequency components,
are not input correctly.
– About supported format, refer to “File format” (@ 28)
“USB Over Current Error”
≥The iPhone/iPad/iPod or USB device is drawing too much
power. Disconnect the iPhone/iPad/iPod or USB device
and turn the unit off and on again.
“Hub Device Not Supported”
“Unrecognizable Device”
“Unsupported”
“Unsupported USB Device”
≥You have connected an iPhone/iPad/iPod or USB device
that is not supported.
– If the iPhone/iPad/iPod is compatible, turn it on and connect it
correctly.
≥The format of the file on the iPhone/iPad/iPod or USB
device is not supported.
– About supported format, refer to “File format” (@ 28)
Remote control
Messages
(25)
26
Specifications
∫ GENERAL
Power supply AC 220 V to 240 V, 50/60 Hz
Power consumption 60 W
Power consumption in standby mode*
(When “Network Standby” is off) Approx. 0.3 W
(When “Network Standby” is on) Approx. 5.6 W
Power consumption in off mode Approx. 0.3 W
Dimensions (WkHkD) 480 mmk120 mmk391 mm
Mass Approx. 17 kg
Operating temperature range 0 oC to r40 oC
Operating humidity range 35 % to 80 % RH (no condensation)
∫ TERMINALS SECTION
Analogue input
LINE input k2 Pin jack
Digital input
AES/EBU digital input 3 pin XLR
Coaxial digital input k3 Pin jack
Optical digital input Optical terminal
USB
Front USB Type A connector
Support memory capacity 2TB (max)
Maximum number of folders (albums) 800
Maximum number of files (songs) 8000
File system FAT1 6, FAT3 2
USB port power DC OUT 5 V 2.1 A (max)
PC
Rear USB Type B connector
Analogue output
BALANCED 3 pin XLR
UNBALANCED Pin jack
Digital output
Technics Digital Link
AES/EBU digital output 3 pin XLR
Coaxial digital output Pin jack
Optical digital output Optical terminal
Headphones jack Stereo, ‰6.3 mm
Ethernet interface
LAN 10 Base-T/100 Base-TX
(26)
27
English
≥ Specifications are subject to change without notice.
≥ Mass and dimensions are approximate.
* When the iPhone/iPad/iPod is not charging
∫ FORMAT SECTION
USB-A
USB Standard USB 2.0 high-speed
USB Mass Storage class
PC (USB-B)
USB Standard USB 2.0 high-speed
USB Audio Class specification USB Audio Class 2.0, Asynchronous mode
DSD control mode ASIO Native mode, DoP mode
DSD64/DSD128 playback
∫ ANALOGUE OUTPUT SECTION
Channel 2ch
Output level
BALANCED 2.3 Vrms
UNBALANCED 2.3 Vrms
Headphone 180 mWr180 mW (32 ≠)
Frequency response
BALANCED 2 Hz to 90 kHz (s3dB)
UNBALANCED 2 Hz to 90 kHz (s3dB)
THD+N
BALANCED 0.0008 % (1 kHz, 0 dB)
UNBALANCED 0.0008 % (1 kHz, 0 dB)
S/N
BALANCED 118 dB (IHF-A)
UNBALANCED 115 dB (IHF-A)
Dynamic range
BALANCED 118 dB (IHF-A)
UNBALANCED 115 dB (IHF-A)
(27)
28
∫ File format
This unit supports the following file formats.
≥This unit does not support the playback of copy-protected music files.
≥Playback of all files in formats supported by this unit is not guaranteed.
≥Playback of a file in a format not supported by this unit may cause choppy audio or noise. In such cases, check to see if this unit
supports the file format.
≥This unit does not support VBR (Variable Bit Rate) playback.
≥Some of the connected devices (servers) may be capable of converting files in formats not supported by this unit and output
them. For details, refer to the operating instructions for your server.
≥File information (sampling frequency, etc.) shown by this unit and playback software may differ from each other.
USB-A
PC (USB-B)*
1
LAN (DLNA)*
2
*1 If you download and install the dedicated app, you can play back files in wide-ranging formats. (> 19)
For details, refer to the operating instructions of the app.
*2 Whether or not each music file can be played back over your network is determined by the network server even if the format of the file is listed
above. For example, if you are using Windows Media
®
Player 11, not all music files on the PC are playable. You can play back only those
added to the library of Windows Media
®
Player 11.
File format Extension Sampling frequency
Bit rate
Number of quantisation bits
MP3 .mp3 32/44.1/48 kHz 16 kbps to 320 kbps
AAC .m4a/.aac 32/44.1/48/88.2/96 kHz 16 kbps to 320 kbps
WMA .wma 32/44.1/48 kHz 16 kbps to 320 kbps
WAV .wav 32/44.1/48/88.2/96/176.4/192 kHz 16/24 bit
FLAC .flac 32/44.1/48/88.2/96/176.4/192 kHz 16/24 bit
AIFF .aiff 32/44.1/48/88.2/96/176.4/192 kHz 16/24 bit
ALAC .m4a 32/44.1/48/88.2/96 kHz 16/24 bit
DSD .dff/.dsf 2.8224/5.6448 MHz
File format Extension Sampling frequency
Bit rate
Number of quantisation bits
PCM 32/44.1/48/88.2/96/176.4/192/352.8/384 kHz 16/24/32 bit
DSD .dff/.dsf 2.8224/5.6448 MHz
File format Extension Sampling frequency
Bit rate
Number of quantisation bits
MP3 .mp3 32/44.1/48 kHz 16 kbps to 320 kbps
AAC .m4a/.aac 32/44.1/48/88.2/96 kHz 16 kbps to 320 kbps
WMA .wma 32/44.1/48 kHz 16 kbps to 320 kbps
WAV .wav 32/44.1/48/88.2/96/176.4/192 kHz 16/24 bit
FLAC .flac 32/44.1/48/88.2/96/176.4/192 kHz 16/24 bit
AIFF .aiff 32/44.1/48/88.2/96/176.4/192 kHz 16/24 bit
ALAC .m4a 32/44.1/48/88.2/96 kHz 16/24 bit
DSD .dff/.dsf 2.8224/5.6448 MHz
(28)
29
English
“Made for iPod”, “Made for iPhone”, and “Made for iPad” mean that an
electronic accessory has been designed to connect specifically to iPod,
iPhone, or iPad, respectively, and has been certified by the developer to
meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards.
Please note that the use of this accessory with iPod, iPhone, or iPad may
affect wireless performance.
AirPlay, iPad, iPhone, iPod, iPod nano, iPod touch, and Retina are
trademarks of Apple Inc., registered in the U.S. and other countries.
iPad Air and iPad mini are trademarks of Apple Inc.
Mac and OS X are trademarks of Apple Inc., registered in the U.S. and
other countries.
Android is a trademark of Google Inc.
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service
marks, or certification marks of the Digital Living Network Alliance.
“Direct Stream Digital”, DSD and their logos are trademarks of Sony
Corporation.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and
Thomson.
Windows and Windows Vista are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other
countries.
Windows Media and the Windows logo are trademarks or registered
trademarks of Microsoft Corporation in the United States and/or other
countries.
This product is protected by certain intellectual property rights of Microsoft
Corporation and third parties. Use or distribution of such technology outside
of this product is prohibited without a license from Microsoft or an
authorized Microsoft subsidiary and third parties.
FLAC Decoder
Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008,
2009 Josh Coalson
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
– Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
– Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
– Neither the name of the Xiph.org Foundation nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
(29)
4
Wir möchten Ihnen dafür danken, dass Sie sich für dieses Gerät entschieden haben.
Bitte lesen Sie diese Anleitung vor der Inbetriebnahme dieses Produkts aufmerksam durch, und bewahren Sie dieses Handbuch
für spätere Bezugnahme griffbereit auf.
∫ Funktionen dieses Geräts
Dieses Gerät bietet folgende Funktionen:
Technics Digital Link
Technics hat die Länge des Signalpfads minimiert, indem der Netzwerk-Audio-Player und der Eingangswähler, die sehr
schwache Signale verarbeiten, in das gleiche Gehäuse gesetzt wurden, und das in schwache Signale gelangende Rauschen so
weit wie möglich reduziert, indem ein separates Gehäuse für den Leistungsverstärker verwendet wird, das hohe Frequenzen und
Ströme verarbeitet. Darüber hinaus minimiert Technics' neu entwickelte Signalübertragungsschnittstelle den Abbau der
Zeitgenauigkeit und Amplitudengenauigkeit, die auftreten, wenn Signale zwischen dem Netzwerk-Control-Player und dem
Leistungsverstärker übertragen werden. Dadurch wird eine ideale Verstärkerkonfiguration erzielt.
Digital Noise Isolation-Architektur
Da die meisten Speichermedien für digitale Inhalte zur Nutzung mit PCs ausgelegt sind, werden diese nicht unter
Berücksichtigung eines niedrigen Rauschens konzipiert, was für eine reine Audiowiedergabe entscheidend ist. Um diese
Herausforderung zu überwinden, nutzt dieses Gerät eine eingehende Maßnahme gegen Jitter sowie eine hervorragende
Technologie zur Rauschunterdrückung für jede einzelne Schnittstelle, um einen klaren und stabilen Klang zu gewährleisten.
Getrennte Analog-/Digital-Stromversorgung
Ein spezieller rauscharmer R-Core-Transformator mit hervorragenden Regeleigenschaften wird individuell für Analog- und
Digitalschaltungen bereitgestellt, um eine hohe Klangqualität zu erzielen.
∫ Empfohlene Geräte
Wir empfehlen die Verwendung von Technics-Geräten (Sonderzubehör) für eine überragende Audioqualität.
* Dieses Produkt wird im Februar 2015 veröffentlicht. (Für Europäische Länder)
Produktname Modellnummer
Stereo-Endstufe SE-R1
Lautsprecheranlage SB-R1*
(30)
Loading...