Specification
ORDER NO. MD0707034CE
Speaker System
SB-PS760GC
SB-PT760GC
Colour
(K)... Black Type
ype 1 way, 1 speaker system (Bass-ref.)
Speaker unit (s) Impedance 3 Ω
1. Full range 6.5cmConetype
Input power (IEC) 110 W* (Max)
Output sound pressure 80 dB/W (1.0 m)
Frequencyrange 95 Hz to 25 kHz (-16 dB)
110 Hz to 22 kHz (-10 dB)
Dimensions (W x H x D) 270 mm x 92 mm x 95.4 mm
Mass 0.9 kg
Notes :
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
* Rating with low-cut filter equipped amplifier.
© 2007 Matsushita Electric Industrial Co. Ltd.. All
rights reserved. Unauthorized copying and
distribution is a violation of law.
SB-PS760GC
1 System Combination
1.1. System Breakdown
Note :
The tables below show the breakdown for speaker combinations used in main unit systems.
System SC-VK760GC-K
Music center SA-VK760GC-K
Front speaker
Surround speakers
Center speaker
Subwoofer
System SC-VK760EE-K
Music center SA-VK760EE-K
Front speaker
Surround speakers
Center speaker
Subwoofer
System SC-VK760GCPK
Music center SA-VK760GCPK
Front speaker
Surround speakers
Center speaker
Subwoofer
System SC-VK760GCSK
Music center SA-VK760GCSK
Front speaker
Surround speakers
Center speaker
Subwoofer
SB-PF760GC-K
SB-PS760GC-K
SB-PC760GC-K
SB-WVK760GC-K
SB-PF760GC-K
SB-PS760GC-K
SB-PC760GC-K
SB-WVK760GC-K
SB-PF760GC-K
SB-PS760GC-K
SB-PC760GC-K
SB-WVK760GC-K
SB-PF760GC-K
SB-PS760GC-K
SB-PC760GC-K
SB-WVK760GC-K
System SC-VK760GCTK
Music center SA-VK760GCTK
Front speaker
Surround speakers
Center speaker
Subwoofer
System SC-VK760GS-K
Music center SA-VK760GS-K
Front speaker
Surround speakers
Center speaker
Subwoofer
SB-PF760GC-K
SB-PS760GC-K
SB-PC760GC-K
SB-WVK760GC-K
SB-PF760GC-K
SB-PS760GC-K
SB-PC760GC-K
SB-WVK760GC-K
1.2. Packaging information (SB-PT760GC-K)
Note: For more information on the complete packaging condition for speakers in SB-PT760GC-K, please refer to section 4.3 in
service manual of SB-PC760GC-K (Order no. MD0707035CE).
2
2 Assembling and Disassembling
“ATTENTION SERVICER”
Some chassis components may have sharp edges. Be careful when disassembling and servicing.
1. This section describes procedures for checking the operation and replacing the main components.
2. For reassembly after operation checks or replacement, reverse the respective procedures.
Special reassembly procedures are described only when required.
3. Select items from the following index when checks or replacement are required.
4. Refer to the Parts No. on the page of “Parts Location and Replacement Parts List” (Section 5), if necessary.
Below is the list of disassembly sections
• Disassembly of Rear cabinet assembly
• Disassembly of Woofer (SP1)
SB-PS760GC
3