Panasonic SAPT-467 Service manual

ORDER NO. MD0803014CE

DVD Home Theater Sound System

SA-PT467EB SA-PT467EG

Colour

(K).......................Black Type

Notes: This model’s CD/DVD mechanism is DLS6. Please refer to the original service manual (Order No. MD0801003CE) for this mechanism.

Specifications

Main unit SA-PT467EB/EG

OGENERAL

Power supply: AC 230-240 V, 50 Hz Power consumption: This unit 135 W Power consumption in standby mode:

approx. 0.4 W

Dimensions (W×H×D): 430 mm×68 mm×327 mm Mass: This unit 3.4 kg Operating temperature range: +0 °C to +40 °C Operating humidity range: 35 % to 80 % RH

(no condensation)

OAMPLIFIER SECTION

RMS Output Power: Dolby Digital Mode

Front Ch:

125 W per channel (3 Ω), 1 kHz, 10% THD

Surround Ch:

125 W per channel (3 Ω), 1 kHz, 10% THD

Center Ch:

250 W per channel (6 Ω), 1 kHz, 10% THD

Subwoofer Ch:

250 W per channel (6 Ω), 100 Hz, 10 % THD

Total RMS Dolby Digital mode power:

DIN Output Power: Dolby Digital Mode

Front Ch:

75 W per channel (3 Ω), 1 kHz, 1% THD

Surround Ch:

70 W per channel (3 Ω), 1 kHz, 1% THD

Center Ch:

145 W per channel (6 Ω), 1 kHz, 1% THD

Subwoofer Ch:

145 W per channel (6 Ω), 100 Hz, 1 % THD

Total DIN Dolby Digital mode power:

OFM TUNER, TERMINALS SECTION

Preset Memory: FM 30 stations Frequency Modulation (FM)

1000 W

580 W

SA-PT467EB / SA-PT467EG

Frequency range:

87.50-108.00 MHz (50-kHz step)

Antenna terminals: 75 Ω (unbalanced )

Digital audio input

Optical digital input: Optical terminal Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz

Phone jack

Terminal: Stereo, 3.5 mm jack

USB Port

USB standard: USB 2.0 full speed Media file format support: MP3 (*.mp3)

WMA (*.wma)

JPEG (*.jpg) (*.jpeg)

MPEG4 (*.asf) (For EG only) USB device file system: FAT12, FAT16, FAT 32 USB Port power: Max. 500 mA

ODISC SECTION (EB area)

Discs played [8 cm or 12 cm]:

(1) DVD (DVD-Video) (2) DVD-RAM (DVD-VR, MP3

*2, 5

(3) DVD-R (DVD-Video, DVD-VR, MP3

, JPEG

*4, 5

*2, 5

)

, JPEG

*4, 5

) (4) DVD-R DL (DVD-Video, DVD-VR) (5) DVD-RW (DVD-Video, DVD-VR, MP3

*2, 5

, JPEG

*4, 5

) (6) +R/+RW (Video) (7) +R DL (Video) (8) CD, CD-R/RW [CD-DA, Video CD, SVCD*1,MP3

*4, 5

, JPEG

] Conforming to IEC62107 MPEG-1 Layer 3, MPEG-2 Layer 3 Windows Media Audio Ver.9.0 L3

*2, 5

ONot compatible with Multiple Bit Rate (MBR)

Exif Ver 2.1 JPEG Baseline files OPicture resolution: between 160 x 120 and 6144 x 4096

pixels (Sub sampling is 4:0:0, 4:2:0, 4:2:2 or 4:4:4). Extremely long and narrow pictures may not be displayed.

The total combined maximum number of recognizable audio and picture contents and groups: 4000 audio and picture contents and 400 groups.

ODISC SECTION (EG area)

Discs played [8 cm or 12 cm]:

(1) DVD (DVD-Video, DivX (2) DVD-RAM (DVD-VR, MP3

*5, 6

)

*2, 5

, JPEG

*4, 5

, MPEG4

*5, 7

)

(3) DVD-R (DVD-Video, DVD-VR, MP3

, DivX

*5, 6

)

*2, 5

, JPEG

*4, 5

, MPEG4

(4) DVD-R DL (DVD-Video, DVD-VR) (5) DVD-RW (DVD-Video, DVD-VR, MP3

MPEG4

*5, 7

, DivX

*5, 6

)

*2, 5

, JPEG

*4, 5

(6) +R/+RW (Video) (7) +R DL (Video) (8) CD, CD-R/RW [CD-DA, Video CD, SVCD*1,MP3

, JPEG

*4, 5

, MPEG4

*5, 7

, DivX

*5, 6

] Conforming to IEC62107 MPEG-1 Layer 3, MPEG-2 Layer 3 Windows Media Audio Ver.9.0 L3

*2, 5

ONot compatible with Multiple Bit Rate (MBR)

,WMA

, DivX

,WMA

*3,

*5, 6

*5,

*3,

Exif Ver 2.1 JPEG Baseline files OPicture resolution: between 160 x 120 and 6144 x 4096

pixels (Sub sampling is 4:0:0, 4:2:0, 4:2:2 or 4:4:4). Extremely long and narrow pictures may not be displayed.

The total combined maximum number of recognizable audio, picture and video contents and groups: 4000 audio, picture and video contents and 400 groups.

Plays all versions of DivX® video (including DivX®6) with standard playback of DivX® media files. Certified to the DivX Home Theater Profile.

MPEG4 data recorded with the Panasonic SD multi cameras or DVD video recorders.

OConforming to SD VIDEO specifications (ASF standard)/ MPEG4 (Simple Profile) video system/G.726 audio system.

Pick up

Wavelength (DVD/CD): 655/785 nm Laser power (DVD/CD): CLASS 1/CLASS 1M

Audio output (Disc)

Number of channels: 5.1ch(FL,FR,C,SL,SR,

SW)

OVIDEO SECTION

Video system: PAL625/50, PAL525/60, NTSC Composite video output

Output level: 1Vp-p(75Ω) Terminal: Scart jack (1 system)

S-video output

Y output level: 1Vp-p(75Ω) C output level: PAL; 0.3 Vp-p (75 Ω)

NTSC; 0.286 Vp-p (75 Ω)

Terminal: Scart jack (1 system)

RGB video output

R output level: 0.7Vp-p(75Ω) G output level: 0.7Vp-p(75Ω ) B output level: 0.7Vp-p(75Ω ) Terminal: Scart jack (1 system)

HDMI AV output

Terminal: 19pin type A connector

HDAVI Control:

This unit supports “HDAVI Control 3” f unction.

Note:

1. Specifications are subject to change without notice. Mass and dimensions are approximate.

2. Total harmonic distortion is measured by the digital spectrum analyzer.

Solder:

This model uses lead free solder (PbF).

Mechanism:

This model uses DLS6 mechanism.

Wireless Features:

This model supports wireless surround (example:SHPT467EG-K).

Refer to their respective original service manuals for *1.

SA-PT467EB / SA-PT467EG

CONTENTS

Page Page

1 Safety Precautions 6

1.1. GENERAL GUIDELINES

1.2. Before Repair and Adjustment

1.3. Protection Circuitry

1.4. Safety Parts Information

1.5. Caution for AC Cord (For EB only)

2 Prevention of Electrostatic Discharge (ESD) to

Electrostatically Sensitive (ES) Devices 3 Precaution of Laser Diode 4 About Lead Free Solder (PbF)

4.1. Service caution based on legal restrictions

5 Handling Precautions for Traverse Unit

5.1. Cautions to Be Taken in Handling the Optical Pickup Unit

5.2. Grounding for electrostatic breakdown prevention

6 Accessories 7 Operation Procedures

7.1. Remote Control Key Buttons Operations

7.2. Main Unit Key Buttons Operations

7.3. Using the VIERA Link “HDAVI Control™”

7.4. Using the iPod

7.5. USB Connection and Operation

7.6. Audio and Video Connection

7.7. Disc Information

8 Self-Diagnosis and Special Mode Setting

8.1. Service Mode Summary Table

8.2. Service Mode Table

8.3. Wireless Service Mode Summary Table

8.4. Service Mode Table (Wireless - eg. SH-FX67)

8.5. DVD Self Diagnostic Function-Error Code

8.6. Sales Demonstration Lock Function

8.7. Service Precautions

9 Assembling and Disassembling

9.1. Disassembly Flow Chart

9.2. Main Components and P.C.B. Locations

9.3. Disassembly of Top Cabinet

9.4. Disassembly of Rear Panel

9.5. Disassembly of Scart P.C.B.

9.6. Disassembly of DVD Mechanism Unit

9.7. Disassembly of Front Panel

9.8. Disassembly of Panel P.C.B.

9.9. Disassembly of Power Button P.C.B.

9.10. Disassembly of USB P.C.B.

10 11

12 12

14 15

15 16 17 19 21 22 24

26 26 33 34 36 38 39

43 44 45 45 45 46 46 47 47 47

6 6 6 7 8

9.11. Disassembly of DVD Lid

9.12. Disassembly of Ipod Cradle P.C.B.

9.13. Disassembly of AC Inlet P.C.B.

9.14. Disassembly of Main P.C.B.

9.15. Disassembly of D-Amp P.C.B.

9.16. Replacement of Digital Amp IC (IC5000)

9.17. Replacement of Digital Amp IC (IC5200)

9.18. Replacement of Digital Amp IC (IC5300)

9.19. Disassembly of SMPS P.C.B.

9.20. Replacement of Switch Regulator IC (IC5701)

9.21. Replacement of Switch Regulator Diode (D5702)

9.22. Replacement of Regulator Diode (D5801)

9.23. Replacement of Regulator Diode (D5802)

9.24. Replacement of Regulator Diode (D5803)

9.25. Disassembly of Power Supply P.C.B.

9.26. Replacement of Regulator IC (IC2903)

9.27. Disassembly of DVD Module P.C.B.

9.28. Disassembly of Coprocessor P.C.B.

9.29. Disassembly of Wireless Adapter P.C.B.

10 Assemb ling and Disassembling of DVD Mecha nism Uni t

10.1. Disassembling Procedures

10.2. Assembling Procedure

11 Service Fixture and Tools 12 Service Position

12.1. Checking & Repairing Main P.C.B.

12.2. Checking & Repairing D-Amp P.C.B.

12.3. Checking & Repairing SMPS P.C.B.

12.4. Checking & Repairing Power Supply P.C.B.

12.5. Checking & Repairing DVD Module P.C.B.

13 Measurements and Adjustments

13.1. Service Tools and Equipment

13.2. Important points in adjustment

13.3. Storing and handling of test discs

13.4. Optical adjustment

14 Vol tage an d Waveform Chart

14.1. DVD Module P.C.B.

14.2. D-Amp P.C.B.

14.3. Main P.C.B.

14.4. Panel P.C.B.

14.5. Power Supply P.C.B.

14.6. Scart P.C.B.

14.7. SMPS P.C.B.

14.8. Waveform Chart

48 48 49 50 51 51 53 54 55 56 57 58 59 60 61 61 62 64 64

65 66

67 68

68 68 70 70 71

74 74 74 75

76 78 79 80 80 81 81 82

SA-PT467EB / SA-PT467EG

15 Illustration of IC’s, Transistors and Diodes 85 16 Wiring Connection Diagram 17 Block Diagram

17.1. System Control

17.2. DVD (Servo)

17.3. DVD (Audio)

17.4. DVD (HDMI)

17.5. VIDEO

17.6. Audio

17.7. Digital Audio Amp

17.8. Power

18 Schem atic Diagram Notes 19 Schematic Diagram

19.1. DVD Module Circuit

19.2. Main Circuit

19.3. Panel Circuit

19.4. Power Button, USB Circuit

19.5. D-Amp Circuit

19.6. Power Supply Circuit

19.7. SMPS Circuit

19.8. AC Inlet, Ipod Cradle

19.9. Coprocessor, Wireless Adapter Circuit

19.10. Scart Circuit

20 Prin ted Circui t Board

20.1. DVD Module P.C.B.

87 89

89 90 91 92 93 94 95 96

97 99

99 104 108 109 110 112 114 116 117 118

119

20.2. Main P.C.B.

20.3. Panel, Power Button, USB, Power Supply & AC Inlet P.C.B.

20.4. D-Amp P.C.B.

20.5. SMPS P.C.B.

20.6. Ipod Cradle, Coprocessor, Scart & Wireless Adapter P.C.B.

21 Basic Troubleshooting Guide

21.1. Troubleshooting Guide for F61 and/or F76

21.2. Basic Troubleshooting Guide for Traverse Unit (DVD Module P.C.B.)

21.3. Basic Troubleshooting Guide for HDMI AV Output

22 Overall Simplified Block for PT467

22.1. SMPS Module & Power Supply Block

23 Terminal Function of ICs

23.1. IC2001 (RFKWPT460E): IC System Control

23.2. IC1701 (MFI341S2095): IC Ipod Video

23.3. IC6901(C0HBB0000057): IC FL Driver

24 Expl od ed Views

24.1. Cabinet Parts Location

24.2. Packaging

25 Repl acement Parts List

25.1. Component Parts List

26 Schem atic Diagra m for printing with letter size

120

121 122 123

124

125

132 133

135

136

137

137 137 138

139

139 140

141

142

157

SA-PT467EB / SA-PT467EG

1 Safety Precautions

1.1. GENERAL GUIDELINES

1. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or damaged by the short circuit.

2. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly installed.

3. After servicing, carry out the following leakage current checks to prevent the customer from being exposed to shock hazards.

1.1.1. LEAKAGE CURRENT COLD CHECK

1. Unplug the AC cord and connect a jumper between the two prongs on the plug.

2. Measure the resistance value, with an ohmmeter, between the jumpered AC plug and each exposed metallic cabinet part on the equipment such as screwheads, connectors, control shafts, etc. When the exposed metallic part has a return path to the chassis, the reading should be between 1MΩ and 5.2MΩ. When the exposed metal does not have a return path to the chassis, the reading must be

1.1.2. LEAKAGE CURRENT HOT CHECK

1. Plug the AC cord directly into the AC outlet. Do not use an isolation transformer for this check.

2. Connect a 1.5kΩ, 10 watts resistor, in parallel with a 0.15µF capacitors, between each exposed metallic part on the set and a good earth ground such as a water pipe, as shown in Figure 1.

3. Use an AC voltmeter, with 1000 ohms/volt or more sensitivity, to measure the potential across the resistor.

4. Check each exposed metallic part, and measure the voltage at each point.

5. Reverse the AC plug in the AC outlet and repeat each of the above measurements.

6. The potential at any point should not exceed 0.75 volts RMS. A leakage current tester (Simpson Model 229 or equivalent) may be used to make the hot checks, leakage current must not exceed 1/2 milliamp. In case a measurement is outside of the limits specified, there is a possibility of a shock hazard, and the equipment should be repaired and rechecked before it is returned to the customer.

Figure 1

1.2. Before Repair and Adjustment

Disconnect AC power to discharge unit AC Capacitors as such C5700, C5701, C5703, C5704, C5705, C5706, C5707 through a 10 Ω, 10 W resistor to ground.

Caution:

DO NOT SHORT-CIRCUIT DIRECTLY (with a screwdriver blade, for instance), as this may destroy solid state devices.

After repairs are completed, restore power gradually using a variac, to avoid overcurrent. Current consumption at AC 230 V~240 V, 50 Hz in NO SIGNAL mode volume minimal should be ~ 600 mA. (EB) Current consumption at AC 230 V, 50 Hz in NO SIGNAL mode volume minimal should be ~ 600 mA. (EG)

1.3. Protection Circuitry

The protection circuitry may have operated if either of the following conditions are noticed:

•

• No sound is heard when the power is turned on.

• •

•

• Sound stops during a performance.

• •

SA-PT467EB / SA-PT467EG

The function of this circuitry is to prevent circuitry damage if, for example, the positive and negative speaker connection wires are “shorted”, or if speaker systems with an impedance less than the indicated rated impedance of the amplifier are used. If this occurs, follow the procedure outlines below:

1. Turn off the power.

2. Determine the cause of the problem and correct it.

3. Turn on the power once again after one minute.

Note:

When the protection circuitry functions, the unit will not operate unless the power is first turned off and then on again.

1.4. Safety Parts Information

Safety Parts List:

There are special components used in this equipment which are important for safety. These parts are marked by should be replaced with manufacturer’s specified parts to prevent shock, fire or other hazards. Do not modify the original design without permission of manufacturer.

Ref. No. Part No. Part Name & Description Remarks 12 REXX0640-J BLACK WIRE (AC-SMPS) [M] 13 REXX0641-J RED WIRE (AC-SMPS) [M] 23 RGRX0067N-AA REAR PANEL [M] EG 23 RGRX0067N-BA REAR PANEL [M] EB 66 RKMX0141-K1 TOP CABINET [M] A6 J0KG00000037 AC CLAMP FILTER [M] PCB3 REPX0622B SMPS / AC INLET P.C.B. [M] (RTL) PCB4 REPX0622B AC INLET P.C.B. [M] (RTL) DZ5701 ERZV10V511CS ZENER [M] L5701 ELF15N035AN LINE FILTER [M] L5702 G0B932H00001 LINE FILTER [M] L5703 ELF22V020A LINE FILTER [M] T2900 G4D1A0000117 SWITCHING TRANSFORMER [M] T5701 ETS42BN1A6AD MAIN TRANSFORMER [M] T5751 ETS19AB256AG BACKUP TRANSFORMER [M] PC5701 B3PBA0000402 PHOTO COUPLER [M] PC5702 B3PBA0000402 PHOTO COUPLER [M] PC5720 B3PBA0000402 PHOTO COUPLER [M] PC5799 B3PBA0000402 PHOTO COUPLER [M] F1 K5D502BNA005 FUSE [M] FP2901 K5G401A00008 FUSE PROTECTOR [M] TH5701 D4CAC8R00002 THERMISTOR [M] TH5860 D4CC11040013 THERMISTOR [M] P5701 K2AA2B000017 AC INLET [M] C5700 F1BAF1020020 1000pF [M] C5701 F0CAF334A087 0.33uF [M] C5703 F0C2H1040001 0.1uF 500V [M] C5704 F1BAF1020020 1000pF [M] C5705 F1BAF1020020 1000pF [M] C5706 F1BAF1020020 1000pF [M] C5707 F1BAF1020020 1000pF [M]

in the Schematic Diagrams & Replacement Parts List. It is essential that these critical parts

Table 1

SA-PT467EB / SA-PT467EG

1.5. Caution for AC Cord (For EB only)

For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark or the BSI mark on the body of the fuse.

If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local dealer.

CAUTION!

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE SOCKET.

If a new plug is to be fitted please observe the wiring code as stated below. If in any doubt please consult a qualified electrician.

IMPORTANT

The wires in this mains lead are coloured in accordance with the following code: Blue: Neutral, Brown: Live. As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black or Blue. The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Brown or Red.

WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E, BY THE EARTH SYMBOL OR COLOURED GREEN OR GREEN/YELLOW.

THIS PLUG IS NOT WATERPROOF KEEP DRY. Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

Figure A Figure B

A A

Fuse cover

2. Replace the fuse and close or attach the fuse cover.

Figure A Figure B

Fuse (5 ampere)

SA-PT467EB / SA-PT467EG

2 Prevention of Electrostatic Discharge (ESD) to

Electrostatically Sensitive (ES) Devices

Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor "chip" components. The following techniques should be used to help reduce the incidence of component damage caused by electrostatic discharge (ESD).

1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any ESD on your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging ESD wrist strap, which should be removed for potential shock reasons prior to applying power to the unit under test.

2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as aluminum foil, to prevent electrostatic charge buildup or exposure of the assembly.

3. Use only a grounded-tip soldering iron to solder or unsolder ES devices.

4. Use only an anti-static solder removal device. Some solder removal devices not classified as "anti-static (ESD protected)" can generate electrical charge sufficient to damage ES devices.

5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices.

6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most replacement ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or comparable conductive material).

7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material to the chassis or circuit assembly into which the device will be installed.

Caution:

Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.

8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as the brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity (ESD) sufficient to damage an ES device).

SA-PT467EB / SA-PT467EG

3 Precaution of Laser Diode

CAUTION :

This product utilizes a laser diode with the unit turned "on", invisible laser radiation is emitted from the pickup lens. Wavelength: 655 nm (DVD)/785 nm (CD) Maximum output radiation power from pickup: 100 µW/VDE

Laser radiation from the pickup unit is safety level, but be sure the followings:

1. Do not disassemble the pickup unit, since radiation from exposed laser diode is dangerous.

2. Do not adjust the variable resistor on the pickup unit. It was already adjusted.

3. Do not look at the focus lens using optical instruments.

4. Recommend not to look at pickup lens for a long time.

ACHTUNG :

Dieses Produkt enthält eine Laserdiode. Im eingeschalteten Zustand wird unsichtbare Laserstrahlung von der Lasereinheitadgestrahit.

Wellenlänge: 655 nm (DVD)/785 nm (CD) Maximale Strahlungsleistung der Lasereinhelt: 100 µW/VDE

Die strahlungan der Lasereinheit ist ungefährlich, wenn folgende Punkte beachtet werden:

1. Die Lasereinheit nicht zerlegen, da die Strahlung an der freigelegten Laserdiode gefährlich ist.

2. Den werksseitig justierten Einstellregler der Lasereinheit nicht verstellen.

3. Nicht mit optischen Instrumenten in die Fokussierlinse blicken.

4. Nicht über längere Zeit in die Fokussierlinse blicken.

SA-PT467EB / SA-PT467EG

4 About Lead Free Solder (PbF)

4.1. Service caution based on legal restrictions

4.1.1. General description about Lead Free Solder (PbF)

The lead free solder has been used in the mounting process of all electrical components on the printed circuit boards used for this equipment in considering the globally environmental conservation.

The normal solder is the alloy of tin (Sn) and lead (Pb). On the other hand, the lead free solder is the alloy mainly consists of tin (Sn), silver (Ag) and Copper (Cu), and the melting point of the lead free solder is higher approx.30 degrees C (86°F) more than that of the normal solder.

Definition of PCB Lead Free Solder being used

The letter of “PbF” is printed either foil side or components side on the PCB using the lead free solder. (See right figure)

Service caution for repair work using Lead Free Solder (PbF)

•

• The lead free solder has to be used when repairing the equipment for which the lead free solder is used.

• •

(Definition: The letter of “PbF” is printed on the PCB using the lead free solder.)

•

• To put lead free solder, it should be well molten and mixed with the original lead free solder.

• •

•

• Remove the remaining lead free solder on the PCB cleanly for soldering of the new IC.

• •

•

• Since the melting point of the lead free solder is higher than that of the normal lead solder, it takes the longer time to melt

• •

the lead free solder.

•

• Use the soldering iron (more than 70W) equipped with the temperature control after setting the temperature at 350±30

• •

degrees C (662±86°F).

Recommended Lead Free Solder (Service Parts Route.)

•

• The following 3 types of lead free solder are available through the service parts route.

• •

RFKZ03D01K-----------(0.3mm 100g Reel) RFKZ06D01K-----------(0.6mm 100g Reel) RFKZ10D01K-----------(1.0mm 100g Reel)

Note

* Ingredient: tin (Sn), 96.5%, silver (Ag) 3.0%, Copper (Cu) 0.5%, Cobalt (Co) / Germanium (Ge) 0.1 to 0.3%

SA-PT467EB / SA-PT467EG

5 Handling Precautions for Traverse Unit

The laser diode in the optical pickup unit may break down due to static electricity of clothes or human body. Special care must be taken avoid caution to electrostatic breakdown when servicing and handling the laser diode in the traverse unit.

5.1. Cautions to Be Taken in Handling the Optical Pickup Unit

The laser diode in the optical pickup unit may be damaged due to electrostatic discharge generating from clothes or human body. Special care must be taken avoid caution to electrostatic discharge damage when servicing the laser diode.

1. Do not give a considerable shock to the optical pickup unit as it has an extremely high-precise structure.

2. To prevent the laser diode from the electrostatic discharge damage, the flexible cable of the optical pickup unit removed should be short-circuited with a short pin or a clip.

3. The flexible cable may be cut off if an excessive force is applied to it. Use caution when handling the flexible cable.

4. The antistatic FPC is connected to the new optical pickup unit. After replacing the opticalpickup unit andconnecting the flexible cable, cut off the antistatic FPC.

5.2. Grounding for electrostatic breakdown prevention

Some devices such as the DVD player use the optical pickup (laser diode) and the optical pickup will be damaged by static electricity in the working environment. Proceed servicing works under the working environment where grounding works is completed.

5.2.1. Worktable grounding

1. Put a conductive material (sheet) or iron sheet on the area where the optical pickup is placed, and ground the sheet.

5.2.2. Human body grounding

1. Use the anti-static wrist strap to discharge the static electricity form your body.

SA-PT467EB / SA-PT467EG

6 Accessories

•

• Note: Refer to “Replacement Parts List” (Section 25) for the part number.

• •

Remote control

AC cord

(EG only)

AC clamp filter

(EB only)

Antenna plug

adaptor

(EB only)

AC clamp filter

(EG only)

AC cord

(EB only)

FM indoor antenna

7 Operation Procedures

7.1. Remote Control Key Buttons Operations

Turn this unit on/off

Select channels and title numbers etc. / Enter numbers

Cancel

Select preset radio stations

Basic operations for play

Show a disc top menu or program list

Select or confirm menu items / Frame-by-frame

Show a disc menu or play list

Show on-screen menu / Display RDS text data

Turn Dolby Pro Logic II on/off

Show setup menu

Select sound mode / Turn Whisper-mode Surround on/off

TV op eratio ns Aim the remote control at the Panasonic TV and press the button.

: Turn the TV on/off

[] [TV/AV]: Change the TV’ s video input mode [, ]:

Adjust the TV volume

+This may not work properly with some models. Select disc as the source

Select USB or iPod as the source

15 16

Select FM tuner or external audio as the source FM AV AU D-IN

SA-PT467EB / SA-PT467EG

Start up and play a disc automatically

Adjust the volume of this unit

Select radio stations manually

Show START menu

Return to previous screen

21 22

Switch information on this unit’s display or Set the Sleep timer Press and hold [-SLEEP]. While the time is shown on this unit’ display, press the [-SLEEP] repeatedly. SLEEP 30 SLEEP 60 SLEEP 90 SLEEP120

OFF (Cancel ) To confirm the remaining time, press and hold the button again.

Select the play mode / Set the rep eat mode

23 24

Mute the sound

"MUTING" flashes in this unit’s display while the function is on. To cancel, press the button again or adjust the volume. Muting is cancelled when you switch the unit to standby.

Adjust the subwoofer level or select speaker channel

SA-PT467EB / SA-PT467EG

7.2. Main Unit Key Buttons Operations

Standby/on switch [ ]

Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.

This indicator lights when the unit is connected to the

AC mains supply. Open/Close the disc tray3 Turn Subwoofer Boost on/off4

5 Select the source

DVD/CD USB FM AV AUX D-IN IPOD

Skip or slow-search play / Select the radio stations6 Stop playing / Select the tuning mode / Adjust the

FM reception condition

Play discs / Memorize the receiving radio stations8 Connect USB device9 Connect iPod

Remote control signal sensor

Display

Adjust the volume of this unit

Connect headphones

Headphone plug type: 3.5 mm stereo mini plug

Reduce the volume before connecting. Audio is automatically switched to 2-channel stereo. To prevent hearing damage, avoid listening for prolonged periods of time.

Excessive sound pressure from earphones and headphones can cause hearing loss.

7.3. Using the VIERA Link “HDAVI Control™”

SA-PT467EB / SA-PT467EG

DVD

VOL

TV/AV

iPod/USB

FM/EXT-I N

SKIP

SETUP

CANCEL

SKIP

TOP ME N U

DIRECT

NAVIGATOR

FUNCTIONS

SETUP SOUND

PLAY LIST

W.S.

SLOW/SEARCH

PLAY MODE

REPEAT

SUBWOOFER

LEVEL

CH SELECT

ONE TOUCH PLAY

PLAYPAUSESTO P

VOL

START

RETURN

FL DISPLAY

SLEEP

MUTING

FM/EXT-IN

ONE TOUCH PLAY

SLOW/SEARCH

PLAY

VIERA Link "HDA VI Control" VIERA Link "HDAVI Control" is a convenient function t hat offers linked operations of th is unit, and a Panasonic TV (VIERA) under "HDAVI Control". You can use this function by connecting the equipment with the HDMI cable. See the operating instructions for connected equipment for operational details.

VIERA Link "HDAVI Control", based on the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guarante ed. This unit supports "HDAVI Control 2" function. "HDAVIControl 2" is the newest standard (current as of December, 2007) for Panasonic’s HDAVI Control compatible equipment. This standard is compatible with

Panasonic’s conventional HDAVI equipment. The TV with "HDAVI Control 2" function enables the following operation: VIERA Link Control only with TV’s remote control (for "HDAVI Control 2") .

Setting the TV audio for VIERA Li n k "HDAVI Co nt ro l "

AUX "

Select between "

and "D-IN" to work with the linked

operations.

AUX

Confirm the audio connection to the

AUX

") or OPTICAL IN terminal (for "D-IN")

terminal (for

1 Press [FM/EXT-IN] to select "D-IN". 2 Press [SETUP] to select "TV AUDIO ", then press

[ , ] to select

"AUX

" or "D-IN".

Whenever the connection or settings are changed, reconfirm the points above.

AUX

" and "D-IN" works depending on the "TV

" AUDIO" setting( VIERALink "HDAVI Control ).

, r

above Setting the TV audio fo

One t o uc h p l ay

You can turn on this unit and the TV, and start playing the disc with a single press of a button.

ONE TOUCH PLAY

Start disc playback.

This function also works if you press [ PLAY ]on this unit’ s remote control when this unit is in standby mode.

[Note] Playback may not be immediately displayed on the TV. If you miss the beginning portion of playback, press [] or [ ] to go back to where playback started.

Aut o i np u t sw i t ching

When you switch the TV input to:

TV tuner mode, this unit will automatically switch to

"AUX " HDMI input mode for this unit, this unit will automatically switch to

"DVD/CD" if it is in "AUX" When you start disc play, the TV will automatically switch its input mode for this unit.

or "D-IN" .

or "D-IN

" mode.

Preparation

Confirm that the HDMI connection has been made and the scart cable is not connected. Set "VIERA Link" to "ON" . To complete and activate the connection correctly, turn on all VIERA Link "HDAVI Control" compatible equipment and set the TV to the corresponding HDMI input mode for this unit.

Power off link

When the TV is turned off, this unit goes into standby mode automatically.

This function works only when "DVD/CD", "AUX"

or "D-IN" is selected as the source on this unit. When the TV is turned on, this unit does not turn on automatically. (Power on link is not available.)

[Note] When you press [ ], only this unit tu rns off. Other connected equipment compatible with VIERA Link "HDAVI Control" stays on.

"USB",

SA-PT467EB / SA-PT467EG

Speaker control

You can select whether audio is output from this unit’s speakers or the TV speakers by using the TV menu settings. For details, refer to the operating instructions of your TV.

VIERA Link Cont rol only with TV’s remote control (f or "HD AVI Con trol 2")

You can control the playback menus of this unit with the TV’s remote control when using the "DVD/CD" or "USB" source. When operating the TV’s remote control, refer to

the below illustration for operation buttons. Home Cinema This unit’s speakers are active.

When this unit is in standby mode, changing the TV speakers to this unit’s speakers in the TV menu will automatically turn this unit on and select "AUX" or "D-IN"

as the source. The TV speakers are automatically muted. You can control the volume setting using the volume or mute button on the TV’s remote control. (The volume level is displayed on this unit s FL display.) To cancel muting, you can also use this units remote control If you turn off this unit, TV speakers will be automatically activated.

TV TV speakers are active.

The volume of this unit is set to "0".

This function works only when "DVD/CD", " USB",

"AUX"

or "D-IN

" is selected as the source on this unit.

Audio output is 2-channel audio.

When switching between this unit’s speakers and TV speakers, the TV screen may be blank for several

1 Select this unit’s operation menu by using the TV

menu settings. (For details, refer to the operating instructions of your

The START menu will be shown. e.g.

DVD/CD HOME CINEMA

PLAYBACK DISC

TOP MENU (DVD) MENU (DVD)

SOUND INPUT SELECT

OK RETURN

Playback/ menu access

2 Select the desired item on the START menu.

[Note]

Depending on the menu, some button operations cannot be performed from the TV’s remote control.

The START menu can also be shown by using a button on the TV’s remote control (e.g. [OPTION]). You cannot input numbers with the numbered buttons

on the TV’s remote control ([0] to [9]). Use this unit’s remote control to select the play list etc.

seconds.

7.4. Using the iPod

BOO

P E

L O

S E

SA-PT467EB / SA-PT467EG

Preparation

To view photos/videos from the iPod

Ensure the video connection to the SCART (AV) terminal on this unit and select "VIDEO" from "VIDEO OUT SCART" in "VIDEO" menu Operate the iPod menu to make the appropriate photo/ video output settings for your TV. (Refer to operating

instructions of your iPod.) To display the picture, turn on the TV and select the appropriate video input mode. Before connecting/disconnecting the iPod, turn this unit off or reduce the volume of this unit to its minimum.

Connect the iPod (not included) firmly.

Recharging starts when the iPod is inserted.

iPod

Dock for iPod

This unit

Hold the dock when connecting/disconnecting the iPod.

iPod/USB

Select "IPOD".

The iPod automatically switches to this unit’s display mode.

Music menu appears on the TV.

e.g.

iPod Home Cinema

Playlists

Artists Albums Song s Podcasts Genres Composer s Audiobooks

To select repeat modes

Press and hold and then press the button

[]

REPEAT

repeatedly within 3 seconds. Each time you press the button:

: Repeat 1 track : Repeat all

Off: Cancel

To operate through display of iPod, press [FUNCTIONS].

Enjo ying m usic

Select an item.

Press [ ] to skip page by page. To return to the previous screen, press [RETURN].

Play starts from the selected song.

e.g.

Song Artist

Album

To select shuffle modes

[

Press

PLAY MODE

Playback condition

iPod Home Cinema

3/ 20 Good mornin g Ronaldo Happy da ys

2:43 -1:15

RETURN

]

Shuffle mode Repeat mode

Current position

Each time you press the button:

: Song shuffle : Album shuffle

Off: Cancel

SA-PT467EB / SA-PT467EG

Enjoying photos/videos

FUNCTIONS

Play a slideshow or video on your iPod.

The picture will be displayed on your TV.

You can also use the remote control to operate iPod menu.

]: To navigate menu items

[ [OK]: To go to the next menu [RETURN]: To return to the previous menu

Basic controls (For music and videos only) Button Function

[ PLAY] Play [STOP], [ (press and hold)

[

You can enjoy surround sound effect when you press [ ] to turn on Dolby Pro Logic II ( 29).

] Skip

]

Switch the iPod to its own display mode.

Proceed operations through display of iPod.

PAUSE] Pause

Compatible iPod

iPod touch (8GB, 16GB) iPod nano 3rd generation (video) (4GB, 8GB) iPod classic (80GB, 160GB) iPod nano 2nd generation (aluminum) (2GB, 4GB, 8GB) iPod 5th generation (video) (60GB, 80GB) iPod 5th generation (video) (30GB) iPod nano 1st generation (1GB, 2GB, 4GB) iPod 4th generation (color display) (40GB, 60GB) iPod 4th generation (color display) (20GB, 30GB) iPod 4th generation (40GB) iPod 4th generation (20GB) iPod mini (4GB, 6GB)

Compatibility depends on the software version of your iPod.

When using the START menu in "IPOD" mode

Select "Music" or "Photos/Videos".

Music: Shows the music menu. Photos/Videos: Switches to display of iPod.

About recharging the battery

iPod will start recharging regardless of whether this unit is on or off. "IPOD " will be shown on this unit’s display during iPod charging in this unit standby mode. Check iPod to see if the battery is fully recharged. If you are not using iPod for an extended period of time after recharging has completed, disconnect it from this unit, as the battery will be depleted naturally. (Once fully recharged, additional recharging will not occur.)

Note

When connecting the iPod, ensure the USB device has been disconnected.

7.5. USB Connection and Operation

You can connect and play tracks or files from USB mass storage class devices. Devices which are defined as USB mass storage class:

USB devices that support bulk only transfer. USB devices that support USB 2.0 full speed.

Preparation

Before connecting any USB mass storage device to the unit, ensure that the data stored therein has been backed up.

It is not recommended to use a USB extension cable. The USB device connected using the cable will not recognised by this unit.

Connect the USB device (not included).

USB device

iPod/USB

O P E

L O

S E

S T

This unit

Select "USB".

The menu screen appears.

USB

e.g.

ROOT

Songs

Concer t_01 Concer t_02 Southern AI

SA-PT467EB / SA-PT467EG

Note

Maximum: 256 folders, 4000 files, 12 characters for file/ folder name Only one memory card will be selected when connecting a multiport USB card reader. Typically the

first memory card inserted. When connecting the USB mass storage device, ensure the iPod has been disconnected.

DVD

VOL

TV/AV

iPod/USB

FM/EXT-IN

STOP, PAUSE

FUNCTIONS

CANCEL

SKIP

TOP MEN U

DIRECT

NAVIGATOR

FUNCTIONS

SETUP SOUND

PLAY LIST

W.S.

SLOW/SEARCH

PLAY MODE

REPEAT

SUBWOOFER

LEVEL

CH SELECT

ONE TOUCH PLAY

VOL

PLAYPAU S ESTOP

START

RETURN

FL DISPLAY

SLEEP

MUTING

PLAY

OK RETURN

PLAY MODE

REPEAT

Pla

y starts from the selected content.

Select an item.

To return to the previous screen,

press [RETURN]

You can enjoy surround sound effect when you press

[ ] to turn on Dolby Pro Logic II

For other operating functions, they are similar to those

described in "Playing discs"

Supported Formats

Still pictures

JPEG (Extension: ".jpg", ".JPG", ".jpeg",

".JPEG")

Music MP3 (Extension: ".mp3", ".MP3")

WMA (Extension: ".wma", ".WMA")

* Video MPEG4 (Extension: ".asf", ".ASF")

* For EG only

SA-PT467EB / SA-PT467EG

7.6. Audio and Video Connection

7.6.1. Basic Setup

Basic setup example

Scart cable (not included)

This unit

This connection will also enable you to play TV audio through your home theater system.

Select the appropriate audio out (e.g., Monitor) on the TV. To improve picture quality, you can change the video signal output from the SCART (AV) terminal to suit the type of TV you are using.

AV1

(not included)

AV2

AV OUT

Scart cable

(not included)

Set top box or video cassette recorder

(not included)

7.6.2. Connecting to a Television with HDMI Terminal

TV terminal

AV IN

Note

Do not make the video connections through the video cassette recorder.

Due to copy guard protection, the picture may not be displayed properly. Only one video connection is required. Choose one of the video connections above depending on your TV.

Cable required

(not included)

HDMI cable

Note

Non-HDMI-compliant cables cannot be utilized. It is recommended that you use Panasonic’s HDMI cable. Recommended part number: RP-CDHG15 (1.5 m), RP-CDHG30 (3.0 m), RP-CDHG50 (5.0 m), etc.

This unit terminal Features

HDMI

This connection provides the best picture quality.

Set "

VIDEO PRIORITY

("HDMI" menu

" to "ON"

Set "VIDEO FORMAT" in Menu 4 (HDMI)

VIERA Link "HDAVI Control"

If your Panasonic TV is compatible, you can operate it synchronising with home theater operations or vice versa (Using the VIERA Link "HDAVI Control

Make the extra audio connection when you use Control

function.

VIERA Link "

VIERA Link

").

HDAVI

7.6.3. Connecting to a Television with Optical & AUX Terminal

SA-PT467EB / SA-PT467EG

TV or external

equipment

terminal

OPTICAL OUT

AUDIO

OUT

Cable required

(not included)

Optical digital audio cable

Do not bend sharply when connecting.

Audi o cab le This connection enables you to play audio

This unit terminal Features

OPTICAL IN

This unit can decode the surround signals received through the set top box, digital broadcasting or satellite broadcasts. Refer to your equipment’s operating instructions

OPTICAL

for details. Only Dolby Digital and PCM can be played with this connection.

After making this connection, make settings to suit the type of audio from your digital equipment

AUX

from your TV, set top box or video cassette

AUX

recorder through your home theater system (Enjoying TV audio).

SA-PT467EB / SA-PT467EG

7.7. Disc Information

7.7.1. Disc Playability (Media)

Commercial discs

Disc Logo

Indicated in these

instructions by

Remarks

DVD-Video

Video CD

Recorded discs ( : Playable,

Disc Logo

DVD-RAM

DVD-R/RW

DVD-R DL

+ R/++RW

+ R

CD-R/RW

DVD-V

VCD

: Not playable)

Recorded on a

DVD video

recorder, etc.

DVD-VR

DVD-V

——

——() ——— — — ——() ——— — — ———

High quality movie and music discs

Music discs with video Including SVCD (Conforming to IEC62107)

Music discs

Recorded on a personal

computer, etc.

WMA MP3 JPEG Di vXMPEG4

—

——— — —

Finalizing

Not necessary

Necessary

For EG only It m

ay not be possible to play all the above-mentioned discs in some cases due to the type of disc, the condition of

the recording, the recording method, or how the files were created. [Refer to Section 7.7.2. File Extension Type Support

This unit can play CD-R/RW recorded with CD-DA or Video CD format.

Discs recorded on DVD recorders or DVD video cameras, etc. using Version 1.1 of the Video Recording Format (a unified video recording standard).

Discs recorded on DVD recorders or DVD video cameras using Version 1.2 of the Video Recording Format (a unified video recording standard).

Discs recorded on DVD recorders or DVD video cameras using DVD-Video Format.

Recorded using a format different from DVD-Video Format, therefore some functions cannot be used.

A process that allows play on compatible equipment. To play a disc that is indicated as "Necessary", the disc must first be finalized on the device it was recorded on.

Closing the session will also work.

WMA/MP3/JPEG/MPEG4/DIVX)]

Note about using a DualDisc

The digital audio content side of a DualDisc does not meet the technical specifications of the Compact Disc Digital Audio (CD-DA) format so playback may not be possible.

Discs that cannot be played

Blu-ray, HD DVD, AVCHD discs, DVD-RW version

1.0, DVD-Audio, DVD-ROM, CD-ROM, CDV, CD-G, SACD, DivX Video Discs and Photo CD, DVD-RAM that cannot be removed from their cartridge, 2.6 GB and 5.2 GB DVD-RAM, and "Chaoji VCD" available on the market including CVD, DVCD and SVCD that do not conform to IEC62107.

Video systems

This unit can play PAL and NTSC, but your TV must match the system used on the disc. PAL discs cannot be correctly viewed on an NTSC TV. This unit can convert NTSC signals to PAL 60 for viewing on a PAL TV ( 22, "NTSC DISC OUT" in "VIDEO" menu).

7.7.2. File Extension Type Support (WMA/MP3/JPEG/MPEG4/DIVX)

Format Disc Extension Reference

WMA CD-R/RW .WMA

MP3

JPEG

MPEG4

DivX

DVD-RAM DVD-R/RW CD-R/RW

.wma

.MP3 .mp3

.JPG .jpg .JPEG .jpeg

.ASF .asf

.DIVX .divx .AVI .avi

Compatible compression rate: between 48 kbps and 320 kbps You cannot play WMA files that are copy-protected. This unit does not support Multiple Bit Rate (MBR: an encoding process for audio content that produces an audio file encoded at several different bit rates).

This unit does not support ID3 tags. Sampling frequency and compression rate:

DVD-RAM, DVD-R/RW: CD-R/RW: 8, 11.02, 12, 16, 22.05, 24 kHz (8 to 160 kbps), 32, 44.1 and 48 kHz (32 to 320 kbps)

JPEG files taken on a digital camera that conform to DCF Standard (Design rule for Camera File system) Version 1.0 are displayed.

Files that have been altered, edited or saved with computer picture editing software may not be

displayed. This unit cannot display moving pictures, MOTION JPEG and other such formats, still pictures other than JPEG (e.g. TIFF), or play pictures with attached audio.

You can play MPEG4 data [conforming to SD VIDEO specifications (ASF standard)/MPEG4 (Simple Profile) video system/G.726 audio system] recorded with Panasonic SD multi cameras or DVD recorders with this unit. The recording date may differ from that of the actual date.

Plays all versions of DivX audio system] with standard playback of DivX supported. DivX files greater than 2 GB or have no index may not be played properly on this unit. This unit supports all resolutions up to maximum of 720k 480 (NTSC)/720k 576 (PAL). You can select up to 8 types of audio and subtitles on this unit.

11.02, 12, 22.05, 24 kHz (8 to 160 kbps), 44.1 and 48 kHz (32 to 320 kbps)

ﬁ

video (including DivXﬁ6) [DivX video system/MP3, Dolby Digital or MPEG

ﬁ

media files. Functions added with DivX Ultra are not

SA-PT467EB / SA-PT467EG

For EG only

There may be differences in the display order on the menu screen and computer screen. This unit cannot play files recorded using packet write.

VD-RAM

Discs must conform to UDF 2.0.

DVD-R/RW

Discs must conform to UDF bridge (UDF 1.02/ISO9660). This unit does not support multi-session. Only the default session is played.

CD-R/RW

Discs must conform to ISO9660 level 1 or 2 (except for extended formats). This unit supports multi-session but if there are many sessions it takes more time for play to start. Keep the number of sessions to a minimum to avoid this.

SA-PT467EB / SA-PT467EG

8 Self-Diagnosis and Special Mode Setting

8.1. Service Mode Summary Table

The service modes can be activated by pressing various button combination on the main unit and remote control unit. Below is the summary for the various modes for checking:

Main unit buttons Remote control unit buttons Application Note

[STOP] [0] Error code check. (Refer to the section

[5] Jitter checking.

[PAUSE] Initial setting of laser drive current.

[FUNCTIONS] DVD laser drive current check. (Refer to the section

[3] CD laser drive current check. [6] Region display and mode.

[SOUND] CPPM/CRM keys check.

[7] Micro-processor firmware version check. (Refer to the section

[ ] Initialization of the player (factory setting is restored).

Used after replacement of Micro-processor (DV5 LSI) IC, FLASH ROM IC (IC8651), EEPROM IC (IC8611) and DVD Module P.C.B.

[OK] DVD Module P.C.B. reset.

[8] DVD Module P.C.B. firmware version check. (Refer to the section [ ] Timer 1 check. [ ] Timer 1 reset.

[ ] Timer 2 check. [ ] Timer 2 reset.

“8.2.1. Service Mode Table 1” for more information.)

“8.2.2. Service Mode Table 2” for more information.)

“8.2.3. Service Mode Table 3“ for more information.)

“8.2.4. Service Mode Table 4“ for more information.)

Note:

An error code will be canceled if a power supply is turned OFF. *1: CPPM is the copy guard function beforehand written in the disk for protection of copyrights. *2: CEC is the consumer electronic control used for high-level user control of HDMI-connected devices. *3: HDCP is the specification developed to control digital audio & video contents transmission for DVI or HDMI connections.

8.2. Service Mode Table

By pressing various button combinations on the main unit and remote control unit, you can activate the various service modes for checking.

Special Note:

•

• Due to the limitations of the no. characters that can be shown on the FL Display, the “FL Display” button on the remote

• •

control unit can be used to show the two display pages. (Display 1 / Display 2).

•

• Refer to Section 7.1 for the section on “Remote Control Key Buttons Operations”.

• •

8.2.1. Service Mode Table 1

SA-PT467EB / SA-PT467EG

Error code

check

Jitter check

Item

DescriptionMode Name

Error code check The latest error code stored in the EEPROM IC is displayed.

Note: Refer to "Section 8.3 DVD Self Diagnostic Function-Error Code" for more detailed information on the error codes.

Jitter check. Jitter rate is measured and displayed. Measurement is repeatedly done in the cycle of one second. Read error counter starts from zero upon mode setting. When target block data failed to be read out, the counter advances by one increment. When the failure is caused by minor error, it may be corrected when retried to enable successful reading. In this case, the counter advances by one. When the error persists even after retry, the counter may jump by two or more.

FL Display sequence: Display 1 2.

FL Display

F / H / U

Error code (play_err) is expressed in the following convention. Error code = 0 x DAXX is expressed: DVDnn U12 Error code = 0 x DBXX is expressed: DVDnn H12 Error code = 0 x DXXX is expressed: DVDnn F123 Error code = 0 x 0000 is expressed: DVDnn F--* "xx" denotes the error code

(Display 1)

Jitter check mode

Jitter rate is shown in decimal notation to one place of decimal. Focus drive value is shown in hexadecimal notation.

(Display 2)

Lead Error Counter

Jitter rate

Focus Drive Value

Key Operation

Front Key

In STOP (no disc) mode, press [STOP] button on the main unit, and [0] button on the remote control unit. *With pointing of cursor up and down on display. Cancelled automatically 5 seconds later. To exit, press [POWER] button on main unit or remote control.

In STOP (with disc inside tray) mode, press [STOP] button on the main unit, and [5] button on the remote control unit, after Display 1 appears, then press [PLAY].

Press [POWER] or [STOP] button to exit.

Press [FL Display] on remote control unit for next page (FL Display).

Initial setting of

laser drive

current

Initial setting of laser drive current. Initial current value for the DVD laser and CD laser is separately saved in the EEPROM IC.

FL Display sequence: Display 1 2.

(Display 1)

Laser current measurement mode

The value denotes the current in decimal notation.

(Display 2)

CD Laser

The above example shows the initial current is XXXmA and YYYmA for CD laser and DVD laser respectively when the laser is switched on.

DVD Laser

In STOP (no disc) mode, press [STOP] button on the main unit, and [PAUSE] button on the remote control unit. Cancelled automatically 5 seconds later.

Press [FL Display] on remote control unit for next page (FL Display) on values of laser drive current.

SA-PT467EB / SA-PT467EG

8.2.2. Service Mode Table 2

DVD laser

drive current

measurement

CD laser drive

current

measurement

Item

DescriptionMode Name

DVD laser drive current measurement. DVD laser drive current is measured and the result is displayed together with the initial value stored in the EEPROM IC. After the measurement, DVD laser emission is kept on. It is turned off when POWER key is switched off.

FL Display sequence: Display 1 2.

CD laser drive current measurement. CD laser drive current is measured and the result is displayed together with the initial value stored in the EEPROM IC. After the measurement, CD laser emission is kept on. It is turned off when POWER key is switched off.

FL Display sequence: Display 1 2.

FL Display

(Display 1)

DVD laser current measurement mode

The value denotes the current in decimal notation.

(Display 2)

DVD Laser Initial Value

The above example shows the initial current is XXXmA and the measured value is YYYmA.

(Display 1)

The value denotes the current in decimal notation.

(Display 2)

DVD Laser Value

CD laser current measurement mode

Key Operation

Front Key

In STOP (no disc) mode, press [STOP] button on the main unit, and [FUNCTIONS] button on the remote control unit. Cancelled automatically 5 seconds later.

Press [FL Display] on remote control unit for next page (FL Display) on values of dvd drive current.

In STOP (no disc) mode, press [STOP] button on the main unit, and [3] button on the remote control unit. Cancelled automatically 5 seconds later.

Press [FL Display] on remote control unit for next page. (FL Display)

Region display

CPPM/CRM Keys Check

Region code display, TV broadcasting system & the model no. information.

Note: Refer to Figure 8.1 for "Video Design Information".

CPPM/CRM refers to the Content Protection for Recordable Media and Pre-Recorded Media. It displays the existence of the keys as "1" or "0". OK: Existing of keys. NG: Non existing of keys.

CD laser initial value

The above example shows the initial current is XXXmA and the measured value is YYYmA.

N: no PAL / P: PAL

Region No.: 0-8

0: NG

1: OK

CD laser value

Model No. Information

N: NTSC / 6: PAL60

In STOP (no disc) mode, press [STOP] button on the main unit, and [6] button on the remote control unit. Cancelled automatically 5 seconds later.

In STOP (no disc) mode, press [STOP] button on the main unit, and [SOUND] button on the remote control unit. Cancelled automatically 5 seconds later.

SA-PT467EB / SA-PT467EG

Product

OSD

Default

English

OSD Menu Language

English, Spanish,

Model Series

P, PC, PX

Country Region

USA, Canada, PX

Region

Code

TV Broadcasting

System

NTSC

Signal System

(Default)

NTSC (*A)

Region Display

(Default)

1PN

Canadian, French

(S) Japanese, English

Japan

NTSC

NTSC (*A)

2PN

Japanese

English, French, German,

Europe

PAL

PAL (*C)

2P6

English

Spanish, Polish, Russian,

Czech, Hungarian

English, French, German,

EB, EG

Europe

PAL

PAL (*C)

2P6

English

Italian, Spanish, Polish,

Swedish, Dutch

English, French, German,

GC, GS

Middle East

PAL

PAL (*C)

2P6

English

Spanish, Polish, Russian,

Czech, Hungarian

GCS, GD, English, Traditional Chinese

GT, GCT

South East Asia,

Korea, Taiwan

New Zealand,

Australia

PL, GCP, LB

Central/South/

Latin America

PAL

NTSC

PAL

NTSC

NTSC (*B)

PAL (*C)

NTSC (*D)

3PN

4P6

4PN

English

English, French, German,

Italian, Spanish, Polish,

Swedish, Dutch

English, Spanish, French,

Brazilian Portuguese

English, French, German,

CIS

SECAM

PAL (*C)

5P6

English

Spanish, Polish, Russian,

Czech, Hungarian

GK English, Simplified Chinese

China

PAL

NTSC (*B)

6PN

English

NTSC (*A)

Source Output

Screen Saver NTSC

NTSC disc NTSC

PAL disc

PAL (DVD-V)

NTSC (DVD-A/VCD)

NTSC (*D)

Source Output

Screen Saver NTSC

NTSC disc NTSC

PAL disc NTSC

NTSC (*B)

Source Output

Screen Saver NTSC

NTSC disc

NTSC (default)

PAL60

PAL disc PAL

Explanation of Display

Figure 8.1 Video Design Information

PAL (*C)

Source Output

Screen Saver PAL

NTSC disc

PAL60 (default)

NTSC

PAL disc PAL

Individual Model Code

N: If NTSC disc is played, NTSC output. 6: If NTSC disc is played, PAL60 output.

Can play PAL disc

Region code

SA-PT467EB / SA-PT467EG

8.2.3. Service Mode Table 3

Micro-processor firmware version

display & EEPROM checksum

display.

Item

DescriptionModel Name

Micro-processor firmware version display & EEPROM checksum display. EEPROM checksum is only available due to existence of EEPROM IC.

Note: Condition 1/2/3 shows the state of EEPROM IC.

FL Display sequence: Display 1 2 3.

FL Display

(Display 1)

(Display 2)

Opecon Version

(Condition 1)

If the version of the EEPROM does not match, [NG] is displayed.

(Condition 2)

EEPROM Checksum (If applicable, refer below.)

Key Operation

Front Key

In STOP (no disc) mode, press [STOP] button on the main unit, and [7] button on the remote control unit. Cancelled automatically 5 seconds later.

Initialization

DVD

Module P.C.B.

Reset

Initialization. User settings are cancelled and player is initialized to factory setting. It is necessary when after replacement of Micro-processor (DV5 LSI) IC, FLASH ROM IC (IC8651), EEPROM IC (IC8611) & DVD Module P.C.B.

To reset DVD Module P.C.B. This process is used when the DVD Module P.C.B. or FLASH ROM IC is replaced with a new one.

(a) If there is NO EEPROM header string OR (b) If there is no EEPROM (no data is received by Micro-processor), [NO] is displayed.

(Condition 3)

If the EEPROM version matches, checksum [YYYY] is displayed.

(Display 3)

Press [FL Display] button on remote control unit for next page. (FL Display)

In STOP (no disc) mode, press [STOP] button on the main unit, and [ 10] button on the remote control unit.

Cancelled automatically 5 seconds later.

While in initialization mode, press & hold [STOP] button on the main unit for 3 seconds, follow by [OK] button on the remote control unit.

Cancelled automatically 5 seconds later.

+ 126 hidden pages