Panasonic SA-DX750 User Manual

AV Control Receiver
Operating Instructions
Model No. SA-DX850
SA-DX750
RQT5818-B
E EB
SA-DX850
“EB” on the packaging indicates the United Kingdom.
Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference.
The radio.....................................................................................22
Manual tuning..............................................................................22
Preset tuning ...............................................................................23
RDS broadcasts .......................................................................24
To display RDS information.........................................................24
PTY search..................................................................................24
EON tuning..................................................................................25
PTY displays................................................................................25
2
RQT5818
Dear customer
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully.
Table of contents
These operating instructions are applicable to models SA­DX850 and SA-DX750, however, are intended primarily for model SA-DX850.
CAUTION
Do not place anything on top of this unit or block the heat radiation vents in any way. In particular, do not place tape decks or CD/DVD players on this unit as heat radiated from it can damage your software.
NO
Before use
Supplied accessories................................................................3
Safety precautions
.....................................................................3
Caution for AC Mains Lead
.....................................................4
Control reference guide
...........................................................5
Operations
DSP sound modes...................................................................16
STEREO mode............................................................................16
SURROUND mode......................................................................16
SFC modes..................................................................................17
Enjoying the sounds...............................................................18
Adjusting the tone and balance...................................................20
Using headphones.......................................................................20
Muting the volume.......................................................................21
Adjusting the subwoofer level......................................................21
Using the TAPE MONITOR.........................................................21
Connections
Connections ................................................................................6
Connecting video equipment.........................................................6
Connecting audio equipment.........................................................7
Connecting digital equipment........................................................7
Antenna connections.....................................................................8
Connecting the AC mains lead and other information...................9
Speaker connections..............................................................10
Placement of speakers................................................................10
Connecting speakers...................................................................10
Preparations
Customizing your receiver....................................................12
Basic steps..................................................................................13
Adjusting speaker output level............................................15
Radio functions
Reference
Making a recording..................................................................26
Timer function
...........................................................................27
The HELP function
...................................................................28
Maintenance
..............................................................................28
Troubleshooting guide
...........................................................29
Specifications
...........................................................................30
Enjoying surround sound
Pages
Connect your equipment
6–9
Position and connect the speakers
10–11
Change the settings
12–14
Adjust speaker output level
15
Sit back and enjoy the experience
18
3
RQT5818
Before use
Please check and identify the supplied accessories.
AC mains lead...................................................................1
AM loop antenna set (RSA0012) .....................................1
(AM loop antenna, antenna holder, screw)
Refer to the separate booklet, Remote Control, for remote control operation details.
Use the numbers indicated in parentheses when asking for replacement parts.
FM indoor antenna (RSA0007-L).....................................1
Batteries............................................................................2
Remote control (EUR7702030)........................................1
Safety precautions
Placement
Set the unit up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. These conditions can damage the cabinet and other components, thereby shortening the units service life.
Do not place heavy items on the unit.
Voltage
Do not use high voltage power sources. This can overload the unit and cause a fire.
Do not use a DC power source. Check the source carefully when setting the unit up on a ship or other place where DC is used.
AC mains lead protection
Ensure the AC mains lead is connected correctly and not damaged. Poor connection and lead damage can cause fire or electric shock. Do not pull, bend, or place heavy items on the lead.
Grasp the plug firmly when unplugging the lead. Pulling the AC mains lead can cause electric shock.
Do not handle the plug with wet hands. This can cause electric shock.
Foreign matter
Do not let metal objects fall inside the unit. This can cause electric shock or malfunction.
Do not let liquids get into the unit. This can cause electric shock or malfunction. If this occurs, immediately disconnect the unit from the power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain flammable gases which can ignite if sprayed into the unit.
Service
Do not attempt to repair this unit by yourself. If sound is interrupted, indicators fail to light, smoke appears, or any other problem that is not covered in these operating instructions occurs, disconnect the AC mains lead and contact your dealer or an authorized service center. Electric shock or damage to the unit can occur if the unit is repaired, disassembled or reconstructed by unqualified persons.
Extend operating life by disconnecting the unit from the power source if it is not to be used for a long time.
Antenna plug (SJP9009) ..................................................1
(Only for the United Kingdom)
For the United Kingdom (VJA0733)
For Continental Europe (RJA0019-2K)
Supplied accessories
Caution for AC Mains Lead
4
RQT5818
(For United Kingdom)
(EB area code model only)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS 1362. Check for the ASTA mark or the BSI mark on the body of the fuse.
If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local dealer.
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE SOCKET.
If a new plug is to be fitted please observe the wiring code as stated below. If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in accordance with the following code: Blue: Neutral, Brown: Live. As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black or Blue. The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Brown or Red.
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E, BY THE EARTH SYMBOL OR COLOURED GREEN OR GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF–KEEP DRY.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
Figure A
Figure B
Fuse cover
2. Replace the fuse and close or attach the fuse cover.
Figure A
Fuse (5 ampere)
Figure B
Fuse (5 ampere)
Control reference guide
5
RQT5818
Before use
Main unit Display section
qq
Standby/on switch [8]........................................................(13)
Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.
ww
Standby indicator [^]
When the unit is connected to the AC mains supply, this indicator lights up in standby mode and goes out when the unit is turned on.
ee
Wake indicator [WAKE] .......................................................(27)
rr
Speaker select buttons [SPEAKERS, A, B]..................(13, 18)
Speaker on/off button [SPEAKERS].............................(15, 18)
tt
RDS button [RDS].................................................................(24)
yy
Timer button [TIMER, -MODE, –TIME] ................................(27)
uu
DSP sound mode select button
[DSP SOUND MODE]......................................................(13, 18)
ii
SFC mode select button [SFC MODE]..........................(13, 18)
oo
Memory button [MEMORY]..................................................(23)
!!00
Volume control [VOLUME] ..................................................(18)
!!11
Input selector [INPUT SELECTOR].....................................(18)
!!22
Digital input select button/indicator [DIGITAL INPUT]......(18)
!!33
Help/reset button [-HELP, –RESET]....................................(28)
!!44
DVD 6ch input select button/indicator [DVD 6CH INPUT]
.....(19)
!!55
Headphone jack [PHONES] .................................................(20)
!!66
Tuning/PTY select buttons
[TUNING, PTY SELECTOR, 2, 1]..................................(22, 24)
!!77
Preset channel/display mode button
[PRESET, DISPLAY MODE] ...........................................(23, 24)
!!88
Band select/EON button [BAND, EON].........................(22, 25)
!!99
FM mode select/PTY search button
[FM MODE, PTY SEARCH].............................................(22, 24)
@@00
Display section
@@11
Tape monitor button [TAPE MONITOR]..............................(21)
@@22
Tone and balance select button
[BASS/TREBLE, BALANCE]................................................(20)
@@33
Tape monitor indicator ........................................................(21)
@@44
Tone and balance adjust buttons [–, +, L, R].....................(20)
SA-DX850
SA-DX750
SA-DX850
@@55
Display
@@66
Frequency unit indicators [kHz, MHz] ................................(22)
@@77
Program format indicators [L, C, R, LS, S, LFE, RS].........(18)
@@88
Front speaker indicators [-SPEAKERS-, Å, ı].................(18)
Front speaker indicator [-SPEAKERS-]..............................(18)
@@99
Low impedance indicator [LOW IMP].................................(14)
##00
Tuned indicator [TUNED].....................................................(22)
##11
Stereo indicator [STEREO]..................................................(22)
##22
Monaural indicator [MONO].................................................(22)
##33
Memory indicator [˜] ..........................................................(23)
##44
Timer indicators [SLEEP, WAKE] .......................................(27)
##55
RDS indicators [ , PS, RT, PTY, EON] .........................(24)
##66
Signal format indicators
[FIXED, PCM, , % DIGITAL, % PRO LOGIC] .....(16, 18)
Signal format indicators
[FIXED, PCM, % DIGITAL, % PRO LOGIC] ................(16, 18)
##77
DSP sound mode indicators
[-SOUND MODE-, SFC, STEREO, SURROUND].................(18)
SA-DX750
SA-DX850
RDS
SA-DX850
SA-DX750
SA-DX850
Reference pages are given in parentheses.
Refer to the separate booklet, Remote Control, for a guide to the remote controls buttons.
10 11 12 13 14
VOLUME
UP
WAKE
SPEAKERS
AB
PHONES
1 2 3
TIMER MEMORYRDS MODE TIME
TUNING
PRESET
PTY SELECTOR
DSP
SOUND MODE
BAND EONDISPLAY MODE
4 5 6
SFC MODE
FM MODE
PTY SEARCH
7 8 9
DOWN
15 16 17 1819 20 21 22 23 24
INPUT SELECTOR
TAPE
MONITOR
HELP RESET
– +
BASS/TREBLE
LR
BALANCE
SPEAKERS
LOW IMP
AB
DIGITAL INPUT
DVD 6CH INPUT
TUNED STEREO MONO
M
SLEEP
RDS
25 26 27
LCR
LS S LFE RS
SOUND MODE
STEREO SURROUND
PS PTYRT EON
kHz
MHz
FIXED PCM
DIGITALWAKE
PRO LOGIC
SFC
28 29 30 31 32 33 363534 37
DVD/DVD 6CH
IN
SUBWOOFER
R
L
CENTER SURROUND
IN
FRONT
L
R
AUDIO OUT (FRONT L, R)
AUDIO OUT (SURROUND L, R)
AUDIO OUT (CENTER) (SUBWOOFER)
VIDEO OUT
Connections
6
RQT5818
Connecting video equipment
Stereo phono cable
White (L) Red (R)
Video connection cable
To connect equipment, refer to the appropriate operating instructions.
Peripheral equipment and cables sold separately unless otherwise indicated.
¡Turn off all components before making any connections. ¡Use digital connection to enjoy Dolby Digital or (SA-DX850 only)
DTS (\page 18).
¡Use analogue connection to enjoy sources that cannot be
decoded on this unit and to record a source (\pages 16, 19 and
26).
Note
c VCRb TV or monitor
g DVD player
To connect analogue 6 channel
SA-DX850
a DVD player
VCR
TV
TV
MONITOR
OUT
IN
INOUT
VIDEO
IN
AUDIO OUT
VIDEO OUT
AUDIO
OUT
VIDEO OUT
VIDEO
IN
AUDIO IN
AV IN
AV IN
Connection with 21 pin scart cable
f VCRe TV or monitor
d 21 pin
scart cable
SA-DX850
LOOP ANT
HOLDER
VCR
IN
DVD/DVD 6CH
IN
FRONT
INOUT
CENTER SURROUND
L
IN
R
SUBWOOFER
SUBWOOFER
OUT
L
R
SPEAKERS
FM ANT
75
LOOP EXT
AM ANT
PLAY
(IN)
TV
MONITOR
TV
OUT
DIGITAL IN
OPTICAL1
(TV)
L
GND
R
COAXIALOPTICAL2
(DVD)
CDPHONO TAPE/MD
REC
(OUT)
FRONT
RAL
+
SURROUND
CENTER
+
FRONT
RBL
+
AC IN
AC
OUTLET
R L
VIDEO OUT
AUDIO OUT
VIDEO IN
VIDEO OUT
AUDIO OUT
AUDIO
VIDEO
OUT
IN
VIDEO IN
AUDIO OUT
LOOP ANT
HOLDER
DVD
TV
TV
MONITOR CENTER SURROUND
COAXIALOPTICAL2
(DVD)
OPTICAL1
(TV)
VCR1
DVD/DVD 6CH
SUBWOOFER
(OUT)
IN
IN
INOUT
FRONT
IN
SUBWOOFER
L
R
R
L
R
L
DIGITAL IN
FM ANT
AM ANT
75
EXT
LOOP
RAL
FRONT
RBL
+
FRONT
R L
SURROUND
CENTER
+
SPEAKERS HAUT PARLEURS
OUT
IN
PLAY
(IN)
REC
(OUT)
GND
CDPHONO TAPE/MD
SA-DX850
OUTPUT
OUTPUT GND
REC (IN)
PLAY (OUT)
LOOP ANT HOLDER
DVD
TV
TV
MONITOR CENTER SURROUND
VCR1
DVD/DVD 6CH
SUBWOOFER
(OUT)
IN
IN
INOUT
PLAY
(IN)
REC
(OUT)
FRONT
IN
SUBWOOFER
L
R
R
L
R
L
GND
FM ANT
AM ANT
75
EXT
LOOP
RAL
FRONT
RBL
+
FRONT
R L
SURROUND
CENTER
+
SPEAKERS HAUT PARLEURS
OUT
IN
DIGITAL IN
CDPHONO TAPE/MD
COAXIALOPTICAL2
(DVD)
OPTICAL1
(TV)
DIGITAL OUT
DIGITAL OUT
DIGITAL
OUT
7
RQT5818
Connections
Connecting audio equipment
Connecting digital equipment
Optical fiber cable Coaxial cable
¡Do not bend the optical fiber cable. ¡If the digital optical connector is not
going to be used, be sure to attach the dust cap to prevent exposure to dust.
This unit cannot decode Dolby Digital RF (radio frequency) signals from a laser disc player.
Note
e Satellite receiver, etc.
a Turntable
b Only for
turntable with ground terminal.
c CD player
d Tape or MD deck
If you have a graphic equalizer, connect it to the TAPE/MD terminals (
\
page 21).
Note
Optical fiber cable connection
h Dust cap
f CD player
g DVD player
Changing the digital input settings
You can change the input settings for the digital terminals if necessary (for example, if your CD player doesnt have a coaxial output terminal). Note the equipment you have connected to the terminals, then change the settings (
\
pages 12–14).
LOOP ANT
HOLDER
TV
VCR1
S-VIDEO
MONITOR
OUT
TV
TV
MONITOR
COAXIALOPTICAL2
(DVD)
OPTICAL1
(TV)
VCR1
IN
(OUT)
PLAY
(IN)
REC
(OUT)
R
L
GND
DIGITAL IN
FM ANT
AM ANT
75
EXT
LOOP
CDPHONO TAPE
OUT
IN
1 2 3
LOOP ANT
HOLDER
TV
VCR1
S-VIDEO
MONITOR
OUT
TV
TV
MONITOR
COAXIALOPTICAL2
(DVD)
OPTICAL1
(TV)
VCR1
IN
(OUT)
PLAY
(IN)
REC
(OUT)
R
L
GND
DIGITAL IN
FM ANT
AM ANT
75
EXT
CDPHONO TAPE
OUT
IN
LOOP
5–12 m
Connections
8
RQT5818
Antenna connections
AM loop antenna
¡Fit the AM loop antenna holder
(included) onto the rear panel of this unit and then attach the AM loop antenna to it (facing in the direction of best reception).
¡Keep the antenna cord away
from tape decks, DVD players, and other cords.
FM antenna
Fix the other end of the antenna where reception is best.
When mounting the antenna to a column, wall or rack
To connect an outdoor antenna
b Adhesive tape
a FM indoor antenna (included)
g Vinyl-covered wire
d Screw
(included)
FM outdoor antenna
¡Disconnect the FM indoor antenna. ¡The antenna should be installed by a competent technician.
AM outdoor antenna
¡Run a piece of vinyl wire horizontally across a window or other
convenient location.
¡Leave the loop antenna connected. ¡Disconnect the antenna when the unit is not in use. Do not use
the antenna during an electrical storm.
c AM loop antenna (included)
LOOP ANT
HOLDER
TV
VCR1
S-VIDEO
MONITOR
OUT
TV
TV
MONITOR
COAXIALOPTICAL2
(DVD)
OPTICAL1
(TV)
VCR1
IN
(OUT)
PLAY
(IN)
REC
(OUT)
R
L
GND
DIGITAL IN
FM ANT
AM ANT
75
EXT
CDPHONO TAPE
OUT
IN
LOOP
[Only for the United Kingdom] Antenna plug (included)
e FM outdoor anntena
f 75 coaxial cable
T
9
RQT5818
Connections
Connecting the AC mains lead and other information
c To household
mains socket
a Cooling fan
The cooling fan operates at high power output levels only.
b AC mains lead
(included)
AC mains lead
Connect this lead only after all other cables and cords are connected.
The included AC mains lead is for use with this unit only. Do not use it with other equipment.
Insertion of Connector
Even when the connector is perfectly inserted, depending on the type of inlet used, the front part of the connector may jut out as shown in the drawing. However there is no problem using the unit.
Note
f Appliance inlet
e Approx. 6 mm
d Connector
(FOR THE UNITED KINGDOM ONLY)
READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 4 BEFORE CONNECTION.
FRONT
RAL
ER
RBL
+
FRONT
+
AC IN
LOOP ANT
HOLDER
TV
VCR1 DVD
S-VIDEO
MONITOR
OUT
TV
TV
MONITOR CENTER SURROUND
COAXIALOPTICAL2
(DVD)
OPTICAL1
(TV)
VCR1
DVD/DVD 6CH
SUBWOOFER
OUT
IN IN
IN
(IN)(OUT)
PLAY
(IN)
REC (OUT)
FRONT
IN
SUBWOOFER
L
R
R
L
R
L
GND
DIGITAL IN
FM ANT
AM ANT
75 GND
EXT
LOOP
AC IN
AC OUTLET
CDPHONO TAPE
OUT
IN
FRONT
R L
+
RAL
FRONT
+
SPEAKERS
RBL
FRONT
R L
SURROUND
CENTER
+
+
321
2
3
1
SA-DX850
Speaker connections
10
RQT5818
Placement of speakers
Connecting speakers
Front speakers
b Front speaker
(left)
d Subwoofer
e Surround speaker
(left)
f Surround speaker
(right)
a Center speaker
c Front speaker
(right)
Front speakers
Place on the left and right of the TV at seated ear height so that there is good coherency between the picture and sound.
Center speaker
Place underneath or above the center of the TV. Aim the speaker at the seating area.
Surround speakers
Place on the side of or slightly behind the seating area, about one meter higher than ear level.
Subwoofer
The subwoofer can be placed in any position as long as it is at a reasonable distance from the TV. Note that some experimentation can yield the smoothest low frequency performance. Placement near a corner can increase the apparent output level, but can result in unnatural bass.
Other connections are possible depending on your speaker system. See your speaker systems operating instructions for details.
g Front speaker
(right)
i Speaker cables
k Speaker cable l Speaker cable
j Front speaker
(right)
m Front speaker
(left)
h Front speaker
(left)
Speaker impedance:
A or B: 4-16 A and B: 8-16
If you connect speakers with an impedance under 6 , switch on LOW IMP (\page 14).
Speaker impedance
: 6-16
SA-DX750
Note
SA-DX850
B terminals
For connection to a second pair of speakers.
Use the A terminals to enjoy SURROUND, SFC and DVD 6CH INPUT.
Note
SA-DX850
The front, center, and surround speakers should be placed at approximately the same distance from the seating area. The angles in the diagram are approximate.
SA-DX750
30° 30°
120°
Loading...
+ 22 hidden pages