Panasonic Projector RS-232C Control Specifications
PT-FW300NT/FW300/F300NT/F300
Using the Serial Terminal
1. Basic Format
Transmission from the computer begins with STX, then the command, parameter and ETX are sent in this
order.
Add parameters according to the details of control.
Basic control command (without parameter)
Start (STX) Command End (ETX)
1 byte 3 bytes 1 byte
Basic control command (with parameters)
Start (STX) Command Separator
(colon)
1 byte 3 bytes 1 byte Undefined length 1 byte
Response (Callback) of the basic control command
In the period when the command can be accepted
Differs according to each command.
In the period when commands cannot be accepted or the command does not exist
Hexadecimal 02h 45h 52h 34h 30h 31h 03h
Character E R 4 0 1
In case of the parameter error
Hexadecimal 02h 45h 52h 34h 30h 32h 03h
Character E R 4 0 2
Parameters End (ETX)
Notes:
• When sending several commands, be sure to wait for a response from the projector, and send the next
command after 0.5 seconds or more pass.
• It might take time by the time the response returns because the command is processed in the
projector. Set the time-out to 10 seconds or longer.
2/49
2. Basic Control Command
Explanatory notes
○: Yes (Enable)
×: No (Disable)
△: Case by case (Refer to the note.)
2.1. Power ON (Lamp ON)
Hexadecimal 02h 50h 4Fh 4Eh 03h
Character P O N
Response (Callback)
In the period when the command can be accepted (This command in power-on condition is included.)
Hexadecimal 02h 50h 4Fh 4Eh 03h
Character P O N
Acceptability
SECURITY STANDBY NO SIGNAL
○ ○ ○ ○ △
Notes:
• When you confirm whether to have succeeded in power-on, confirm it by QPW (Query Power) command after
receiving the callback of PON command.
• When REMOTE is effective, ER401 is returned as a response (callback).
2.2. Power OFF (Standby)
Hexadecimal 02h 50h 4Fh 46h 03h
Character P O F
Response (Callback)
In the period when the command can be accepted (This command in power-off condition is included.)
Hexadecimal 02h 50h 4Fh 46h 03h
Character P O F
Acceptability
SECURITY STANDBY NO SIGNAL
○ ○ ○ ○ △
Notes:
• When you confirm whether to have succeeded in power-off, confirm it by QPW (Query Power) command after
receiving the callback of POF command.
• When REMOTE is effective, ER401 is returned as a response (callback).
2.3. AUTO SETUP
Hexadecimal 02h 4Fh 41h 53h 03h
Character O A S
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 41h 53h 03h
Character O A S
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
× × △ × ○
Note:
• During NO SIGNAL, this command is available only when SIGNAL SEARCH is ON.
2.4. AV MUTE
Hexadecimal 02h 4Fh 53h 48h 3Ah
Character O S H : *2
Parameters (*1, *2)
AV MUTE OFF AV MUTE ON
Hexadecimal 30h 31h
Character 0 1
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 53h 48h 3Ah *1 03h
Character O S H : *2
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
× × ○ ○ ○
AV M UTE REMOTE
AV M UTE REMOTE
*1 03h
3/49
2.5. FREEZE
Hexadecimal 02h 4Fh 46h 5Ah 3Ah
Character O F Z : *2
Parameters (*1, *2)
FREEZE OFF FREEZE ON
Hexadecimal 30h 31h
Character 0 1
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 46h 5Ah 3Ah *1 03h
Character O F Z : *2
Acceptability
SECURITY STANDBY NO SIGNAL
× × × × ○
2.6. INPUT SELECT
Hexadecimal 02h 49h 49h 53h 3Ah
Character I I S : *2 *4 *6
Parameters (*1, *2, *3, *4, *5, *6)
Hexadecimal 52h 47h 31h 52h 47h 32h
Character R G 1 R G 2
Hexadecimal 56h 49h 44h 53h 56h 44h
Character V I D S V D
Hexadecimal 44h 56h 49h 4Eh 57h 50h
Character Ｄ V I N W P
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 49h 49h 53h 3Ah *1 *3 *5 03h
Character I I S : *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
× △ ○ ○ △
Notes:
• During STANDBY, this command is available only when IN STANDBY MODE is ON.
• REMOTE is given to priority. Calls back ER402 if INPUT SELECT by REMOTE is effective.
2.7. MENU
Hexadecimal 02h 4Fh 4Dh 4Eh 03h
Character O M N
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 4Dh 4Eh 03h
Character O M N
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
○ × ○ × ○
2.8. ENTER
Hexadecimal 02h 4Fh 45h 4Eh 03h
Character O E N
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 45h 4Eh 03h
Character O E N
Acceptability
SECURITY STANDBY NO SIGNAL
○ × ○ × ○
*1 03h
AV M UTE REMOTE
*1 *3 *5 03h
COMPUTER1 COMPUTER2
VIDEO S-VIDEO
DVI NETWORK
AV M UTE REMOTE
AV M UTE REMOTE
4/49
2.9. Navigation Up (↑)
Hexadecimal 02h 4Fh 43h 55h 03h
Character O C U
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 43h 55h 03h
Character O C U
Acceptability
SECURITY STANDBY NO SIGNAL
○ × ○ × ○
2.10. Navigation Down (↓)
Hexadecimal 02h 4Fh 43h 44h 03h
Character O C D
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 43h 44h 03h
Character O C D
Acceptability
SECURITY STANDBY NO SIGNAL
○ × ○ × ○
2.11. Navigation Left (←)
Hexadecimal 02h 4Fh 43h 4Ch 03h
Character O C L
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 43h 4Ch 03h
Character O C L
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
○ × ○ × ○
2.12. Navigation Right (→)
Hexadecimal 02h 4Fh 43h 52h 03h
Character O C R
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 43h 52h 03h
Character O C R
Acceptability
SECURITY STANDBY NO SIGNAL
○ × ○ × ○
2.13. DEFAULT
Hexadecimal 02h 4Fh 53h 54h 03h
Character O S T
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 53h 54h 03h
Character O S T
Acceptability
SECURITY STANDBY NO SIGNAL
○ × ○ × ○
2.14. RETURN
Hexadecimal 02h 4Fh 42h 4Bh 03h
Character O B K
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 42h 4Bh 03h
Character O B K
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
○ × ○ × ○
AV M UTE REMOTE
AV M UTE REMOTE
AV M UTE REMOTE
AV M UTE REMOTE
5/49
2.15. VOLUME +
Hexadecimal 02h 41h 55h 55h 03h
Character A U U
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 41h 55h 55h 03h
Character A U U
Acceptability
SECURITY STANDBY NO SIGNAL
× △ × × ○
Note:
• During STANDBY, this command is available only when IN STANDBY MODE is ON.
2.16. VOLUME -
Hexadecimal 02h 41h 55h 44h 03h
Character A U D
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 41h 55h 44h 03h
Character A U D
Acceptability
SECURITY STANDBY NO SIGNAL
× △ × × ○
Note:
• During STANDBY, this command is available only when IN STANDBY MODE is ON.
2.17. INDEX-window
Hexadecimal 02h 4Fh 49h 58h 03h
Character O I X
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 49h 58h 03h
Character O I X
Acceptability
SECURITY STANDBY NO SIGNAL
× × × × ○
2.18. DIGITAL ZOOM +
Hexadecimal 02h 44h 5Ah 55h 03h
Character D Z U
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 44h 5Ah 55h 03h
Character D Z U
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
× × × × ○
2.19. DIGITAL ZOOM -
Hexadecimal 02h 44h 5Ah 44h 03h
Character D Z D
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 44h 5Ah 44h 03h
Character D Z D
Acceptability
SECURITY STANDBY NO SIGNAL
× × × × ○
AV M UTE REMOTE
AV M UTE REMOTE
AV M UTE REMOTE
AV M UTE REMOTE
6/49
2.20. COMPUTER SEARCH
Hexadecimal 02h 4Fh 50h 43h 03h
Character O P C
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 50h 43h 03h
Character O P C
Acceptability
SECURITY STANDBY NO SIGNAL
× × ○ × ○
Note:
• This command is available only for PT-FW300NT**/F300NT**.
2.21. PAGE Up (↑)
Hexadecimal 02h 4Fh 55h 50h 03h
Character O U P
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 55h 50h 03h
Character O U P
Acceptability
SECURITY STANDBY NO SIGNAL
× × × × ○
2.22. PAGE Down (↓)
Hexadecimal 02h 4Fh 44h 50h 03h
Character O D P
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 44h 50h 03h
Character O D P
Acceptability
SECURITY STANDBY NO SIGNAL
× × × × ○
2.23. MULTI-LIVE
Hexadecimal 02h 4Fh 4Dh 4Ch 03h
Character O M L
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 4Dh 4Ch 03h
Character O M L
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
× × × × ○
AV M UTE REMOTE
AV M UTE REMOTE
AV M UTE REMOTE
7/49
2.24. PICTURE MODE
Hexadecimal 02h 56h 50h 4Dh 3Ah *1 *3 *5 03h
Character V P M : *2 *4 *6
Parameters (*1, *2, *3, *4, *5, *6)
DYNAMIC NATURAL STANDARD BLACKBOARD
Hexadecimal 44h 59h 4Eh 4Eh 41h 54h 53h 54h 44h 42h 42h 44h
Character D Y N N A T S T D B B D
CINEMA
Hexadecimal 43h 49h 4Eh
Character C I N
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 56h 50h 4Dh
Character V P M : *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
× × × × ○
Note:
• Parameters "NAT" is available when still image is displayed and "CIN" is available when moving image is
displayed.
2.25. CONTRAST
Hexadecimal 02h 56h 43h 4Eh 3Ah
Character V C N : *2 *4 *6
Parameters (*1, *2, *3, *4, *5, *6)
－32 －31 －30
Hexadecimal 2Dh 33h 32h 2Dh 33h 31h 2Dh 33h 30h
Character － 3 2 － 3 1 － 3 0
30 31 32
Hexadecimal 30h 33h 30h 30h 33h 31h 30h 33h 32h
Character 0 3 0 0 3 1 0 3 2
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 56h 43h 4Eh 3Ah *1 *3 *5 03h
Character V C N : *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
× × × × ○
2.26. BRIGHTNESS
Hexadecimal 02h 56h 42h 52h 3Ah
Character V B R : *2 *4 *6
Parameters (*1, *2, *3, *4, *5, *6)
－32 －31 －30
Hexadecimal 2Dh 33h 32h 2Dh 33h 31h 2Dh 33h 30h
Character － 3 2 － 3 1 － 3 0
30 31 32
Hexadecimal 30h 33h 30h 30h 33h 31h 30h 33h 32h
Character 0 3 0 0 3 1 0 3 2
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 56h 42h 52h 3Ah *1 *3 *5 03h
Character V B R : *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
× × × × ○
3Ah
AV M UTE REMOTE
AV M UTE REMOTE
*1 *3 *5 03h
*1 *3 *5 03h
*1 *3 *5 03h
8/49
2.27. COLOR
Hexadecimal 02h 56h 43h 4Fh 3Ah
Character V C O : *2 *4 *6
Parameters (*1, *2, *3, *4, *5, *6)
Hexadecimal 2Dh 33h 32h 2Dh 33h 31h 2Dh 33h 30h
Character － 3 2 － 3 1 － 3 0
Hexadecimal 30h 33h 30h 30h 33h 31h 30h 33h 32h
Character 0 3 0 0 3 1 0 3 2
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 56h 43h 4Fh 3Ah *1 *3 *5 03h
Character V C O : *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
× × × × ○
Note:
• This command is acceptable only when moving image is displayed. In other cases, ER401 is returned.
2.28. TINT
Hexadecimal 02h 56h 54h 4Eh 3Ah
Character V T N : *2 *4 *6
Parameters (*1, *2, *3, *4, *5, *6)
Hexadecimal 2Dh 33h 32h 2Dh 33h 31h 2Dh 33h 30h
Character － 3 2 － 3 1 － 3 0
Hexadecimal 30h 33h 30h 30h 33h 31h 30h 33h 32h
Character 0 3 0 0 3 1 0 3 2
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 56h 54h 4Eh 3Ah *1 *3 *5 03h
Character V T N : *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
× × × × ○
Note:
• This command is acceptable only when moving image is displayed. In other cases, ER401 is returned.
2.29. SHARPNESS
Hexadecimal 02h 56h 53h 52h 3Ah
Character V S R : *2 *4 *6
Parameters (*1, *2, *3, *4, *5, *6)
Hexadecimal 30h 30h 30h 30h 30h 31h 30h 30h 32h
Character 0 0 0 0 0 1 0 0 2
Hexadecimal 30h 31h 33h 30h 31h 34h 30h 31h 35h
Character 0 1 3 0 1 4 0 1 5
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 56h 53h 52h 3Ah *1 *3 *5 03h
Character V S R : *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
× × × × ○
*1 *3 *5 03h
－32 －31 －30
30 31 32
AV M UTE REMOTE
*1 *3 *5 03h
－32 －31 －30
30 31 32
*1 *3 *5 03h
0 1 2
13 14 15
9/49
2.30. COLOR TEMPERATURE
Hexadecimal 02h 4Fh 54h 45h 3Ah
Character O T E : *2
Parameters (*1, *2)
LOW DEFAULT HIGH
Hexadecimal 30h 31h 32h
Character 0 1 2
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 54h 45h 3Ah *1 03h
Character O T E : *2
Acceptability
SECURITY STANDBY NO SIGNAL
× × × × ○
2.31. DAYLIGHT VIEW
Hexadecimal 02h 56h 58h 58h 3Ah 44h 4Ch 56h 49h
Character V X X : D L V I
Hexadecimal 30h 3Dh 2Dh *1 *3 *5 *7 *9 03h
Character 0 = + *2 *4 *6 *8 *10
Parameters (*1, *2, *3, *4, *5, *6, *7, *8, *9, *10)
FRONT INSTALLATION
OFF
Hexadecimal 30h 30h 30h 30h 30h
Character 0 0 0 0 0
AUTO
Hexadecimal 30h 30h 30h 30h 31h
Character 0 0 0 0 1
ON
Hexadecimal 30h 30h 30h 30h 32h
Character 0 0 0 0 2
REAR INSTALLATION
OFF
Hexadecimal 30h 30h 30h 30h 30h
Character 0 0 0 0 0
ON
Hexadecimal 30h 30h 30h 30h 31h
Character 0 0 0 0 1
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 56h 58h 58h 3Ah 44h 4Ch 56h 49h
Character V X X : D L V I
Hexadecimal 30h 3Dh 2Dh *1 *3 *5 *7 *9 03h
Character 0 = + *2 *4 *6 *8 *10
Acceptability
SECURITY STANDBY NO SIGNAL
× × × × ○
*1 03h
AV M UTE REMOTE
AV M UTE REMOTE
10/49
2.32. TV-SYSTEM
Hexadecimal 02h 56h 53h 47h 3Ah *1 *3 *5 03h
Character V S G : *2 *4 *6
Parameters (*1, *2, *3, *4, *5, *6)
AUTO NTSC NTSC4.43 PAL
Hexadecimal 41h 55h 54h 4Eh 54h 53h 4Eh 34h 34h 50h 41h 4Ch
Character A U T N T S N 4 4 P A L
PAL-M PAL-N SECAM
Hexadecimal 50h 41h 4Dh 50h 41h 4Eh 53h 45h 43h
Character P A M P A N S E C
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 56h 53h 47h 3Ah
Character V S G : *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
× × ○ × ○
Note:
• This command is acceptable only when the input is VIDEO or S-VIDEO. In other cases, ER401 is returned.
2.33. NOISE REDUCTION
Hexadecimal 02h 56h 4Eh 52h 3Ah
Character V N R : *2
Parameters (*1, *2)
OFF ON
Hexadecimal 30h 31h
Character 0 1
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 56h 4Eh 52h 3Ah *1 03h
Character V N R : *2
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
× × × × ○
Note:
• This command is acceptable only when the input is VIDEO or S-VIDEO. In other cases, ER401 is returned.
*1 *3 *5 03h
AV M UTE REMOTE
*1 03h
2.34. WHITE BALANCE RED
Hexadecimal 02h 56h 57h 52h 3Ah
Character V W R : *2 *4 *6
Parameters (*1, *2, *3, *4, *5, *6)
－32 －31 －30
Hexadecimal 2Dh 33h 32h 2Dh 33h 31h 2Dh 33h 30h
Character － 3 2 － 3 1 － 3 0
30 31 32
Hexadecimal 30h 33h 30h 30h 33h 31h 30h 33h 32h
Character 0 3 0 0 3 1 0 3 2
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 56h 57h 52h 3Ah *1 *3 *5 03h
Character V W R : *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
× × × × ○
Note:
AV M UTE REMOTE
*1 *3 *5 03h
• Only when the input is DVI, COMPUTER1 or COMPUTER2, and still image is displayed, this command is
acceptable. In other cases, ER401 is returned.
11/49
2.35. WHITE BALANCE GREEN
Hexadecimal 02h 56h 57h 47h 3Ah
Character V W G : *2 *4 *6
Parameters (*1, *2, *3, *4, *5, *6)
－32 －31 －30
Hexadecimal 2Dh 33h 32h 2Dh 33h 31h 2Dh 33h 30h
Character － 3 2 － 3 1 － 3 0
30 31 32
Hexadecimal 30h 33h 30h 30h 33h 31h 30h 33h 32h
Character 0 3 0 0 3 1 0 3 2
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 56h 57h 47h 3Ah *1 *3 *5 03h
Character V W G : *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
× × × × ○
Note:
• Only when the input is DVI, COMPUTER1 or COMPUTER2, and still image is displayed, this command is
acceptable. In other cases, ER401 is returned.
2.36. WHITE BALANCE BLUE
Hexadecimal 02h 56h 57h 42h 3Ah
Character V W B : *2 *4 *6
Parameters (*1, *2, *3, *4, *5, *6)
－32 －31 －30
Hexadecimal 2Dh 33h 32h 2Dh 33h 31h 2Dh 33h 30h
Character － 3 2 － 3 1 － 3 0
30 31 32
Hexadecimal 30h 33h 30h 30h 33h 31h 30h 33h 32h
Character 0 3 0 0 3 1 0 3 2
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 56h 57h 42h 3Ah *1 *3 *5 03h
Character V W B : *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
× × × × ○
Note:
• Only when the input is DVI, COMPUTER1 or COMPUTER2, and still image is displayed, this command is
acceptable. In other cases, ER401 is returned.
*1 *3 *5 03h
AV M UTE REMOTE
*1 *3 *5 03h
AV M UTE REMOTE
2.37. KEYSTONE
Hexadecimal 02h 4Fh 4Bh 53h 3Ah
Character O K S : *2 *4 *6
Parameters (*1, *2, *3, *4, *5, *6)
－32 －31 －30
Hexadecimal 2Dh 33h 32h 2Dh 33h 31h 2Dh 33h 30h
Character － 3 2 － 3 1 － 3 0
30 31 32
Hexadecimal 30h 33h 30h 30h 33h 31h 30h 33h 32h
Character 0 3 0 0 3 1 0 3 2
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 4Bh 53h 3Ah *1 *3 *5 03h
Character O K S : *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
× ○ ○ × ○
AV M UTE REMOTE
*1 *3 *5 03h
12/49
2.38. SHIFT H
Hexadecimal 02h 56h 48h 50h 3Ah
Parameters (*1, *2, *3, *4, *5, *6, *7, *8)
Response (Callback)
In the period when the command can be accepted
Acceptability
Note:
• This command is not acceptable when the input is NETWORK. In this case, ER401 is returned.
2.39. SHIFT V
Hexadecimal 02h 56h 56h 50h 3Ah
Parameters (*1, *2, *3, *4, *5, *6)
Response (Callback)
In the period when the command can be accepted
Acceptability
Note:
• This command is acceptable except when the input is NETWORK. Or, this command is acceptable when the
*1 *3 *5 *7 03h
Character V H P : *2 *4 *6 *8
－127 －126
Hexadecimal 2Dh 33h 32h 37h 2Dh
Character － 1 2 7 － 1 2 6
126 127
Hexadecimal 30h 33h 32h 36h 30h 33h 32h 37h
Character 0 1 2 6 0 1 2 7
Hexadecimal 02h 56h 48h 50h 3Ah *1 *3 *5 *7 03h
Character V H P : *2 *4 *6 *8
SECURITY STANDBY NO SIGNAL
× × × × ○
Character V V P : *2 *4 *6
－64 －63 －62
Hexadecimal 2Dh 36h 34h 2Dh 36h 33h 2Dh 36h 32h
Character － 6 4 － 6 3 － 6 2
62 63 64
Hexadecimal 30h 36h 32h 30h 36h 33h 30h 36h 34h
Character 0 6 2 0 6 3 0 6 4
Hexadecimal 02h 56h 56h 50h 3Ah *1 *3 *5 03h
Character V V P : *2 *4 *6
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
× × × × ○
input is NETWORK and ASPECT is H-FIT (for FW300 series only). In other cases, ER401 is returned.
AV M UTE REMOTE
33h 32h 36h
*1 *3 *5 03h
2.40. DOT CLOCK
Hexadecimal 02h 56h 44h 43h 3Ah
Character V D C : *2 *4 *6
Parameters (*1, *2, *3, *4, *5, *6)
－32 －31 －30
Hexadecimal 2Dh 33h 32h 2Dh 33h 31h 2Dh 33h 30h
Character － 3 2 － 3 1 － 3 0
30 31 32
Hexadecimal 30h 33h 30h 30h 33h 31h 30h 33h 32h
Character 0 3 0 0 3 1 0 3 2
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 56h 44h 43h 3Ah *1 *3 *5 03h
Character V D C : *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
× × × × ○
Note:
*1 *3 *5 03h
• Only when the input is COMPUTER1 or COMPUTER2, and still image is displayed, this command is acceptable.
In other cases, ER401 is returned.
13/49
2.41. CLOCK PHASE
Hexadecimal 02h 56h 43h 50h 3Ah
Character V C P : *2 *4 *6
Parameters (*1, *2, *3, *4, *5, *6)
－16 －15 －14
Hexadecimal 2Dh 31h 36h 2Dh 31h 35h 2Dh 31h 34h
Character － 1 6 － 1 5 － 1 4
14 15 16
Hexadecimal 30h 31h 34h 30h 31h 35h 30h 31h 36h
Character 0 1 4 0 1 5 0 1 6
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 56h 43h 50h 3Ah *1 *3 *5 03h
Character V C P : *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
× × × × ○
Note:
• This command is acceptable only when the input is COMPUTER1 or COMPUTER2. In other cases, ER401 is
returned.
2.42. ASPECT
Hexadecimal 02h 56h 53h 31h 3Ah
Character V S 1 : *2
Parameters (*1, *2)
F300 series
AUTO 4:3 16:9 S4:3 THROUGH
Hexadecimal 30h 31h 32h 33h
Character 0 1 2 3 4
FW300 series
AUTO
Hexadecimal 30h 31h 32h 33h 34h 35h 36h
Character 0 1 2 3 4 5 6
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 56h 53h 31h 3Ah *1 03h
Character V S 1 : *2
Acceptability
SECURITY STANDBY NO SIGNAL
× × × × ○
*1 *3 *5 03h
AV M UTE REMOTE
*1 03h
34h
4:3 16:9 H-FIT V-F IT HV-FIT THROUGH
AV M UTE REMOTE
2.43. FRAME LOCK
Hexadecimal 02h 56h 46h 4Ch 3Ah
Character V F L : *2
Parameters (*1, *2)
OFF ON
Hexadecimal 30h 31h
Character 0 1
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 56h 46h 4Ch 3Ah *1 03h
Character V F L : *2
Acceptability
SECURITY STANDBY NO SIGNAL
× × × × ○
AV M UTE REMOTE
*1 03h
14/49
2.44. LANGUAGE
Hexadecimal 02h 4Fh 4Ch 47h 3Ah
Character O L G : *2 *4 *6
Parameters (*1, *2, *3, *4, *5, *6,)
Hexadecimal 45h 4Eh 47h 44h 45h 55h 46h 52h 41h
Character E N G D E U F R A
Hexadecimal 45h 53h 50h 49h 54h 4Ch 4Ah 50h 4Eh
Character E S P I T L J P N
Hexadecimal 43h 48h 49h 52h 55h 53h 4Bh 4Fh 52h
Character C H I R U S K O R
Hexadecimal 50h 4Fh 52h 53h 56h 45h 4Eh 4Fh 52h
Character P O R S V E N O R
Hexadecimal 44h 41h 4Eh 50h 4Fh 4Ch 43h 45h 53h
Character D A N P O L C E S
Hexadecimal 4Dh 41h 47h 54h 48h 41h
Character M A G T H A
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 4Ch 47h 3Ah *1 *3 *5 03h
Character O L G : *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
× ○ ○ ○ ○
2.45. INPUT GUIDE
Hexadecimal 02h 4Fh 49h 44h 3Ah
Character O I D : *2
Parameters (*1, *2)
OFF SIMPLE DETAILED
Hexadecimal 30h 31h 32h
Character 0 1 2
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 49h 44h 3Ah *1 03h
Character O I D : *2
Acceptability
SECURITY STANDBY NO SIGNAL
× ○ ○ ○ ○
*1 *3 *5 03h
English German French
Spanish Italian Japanese
Chinese Russian Korean
Portuguese Swedish Norwegian
Danish Polish Czech
Hungarian Thai
AV M UTE REMOTE
*1 03h
AV M UTE REMOTE
2.46. STARTUP LOGO
Hexadecimal 02h 4Dh 4Ch 4Fh 3Ah
Character M L O : *2
Parameters (*1, *2)
OFF ON USER
Hexadecimal 30h 31h 32h
Character 0 1 2
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Dh 4Ch 4Fh 3Ah *1 03h
Character M L O : *2
Acceptability
SECURITY STANDBY NO SIGNAL
× ○ ○ ○ ○
AV M UTE REMOTE
*1 03h
15/49
2.47. COMPUTER2 SELECT
Hexadecimal 02h 4Fh 52h 49h 3Ah *1 *3 *5 03h
Character O R I : *2 *4 *6
Parameters (*1, *2, *3, *4, *5, *6)
INPUT OUTPUT
Hexadecimal 32h 49h 4Eh 32h 4Fh 55h
Character 2 I N 2 O U
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 52h 49h 3Ah
Character O R I : *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
× × ○ ○ ○
Note:
• This command is not available when COMPUTER2 is selected.
2.48. NO SIGNAL SHUT-OFF
Hexadecimal 02h 4Fh 41h 46h 3Ah
Character O A F : *2 *4
Parameters (*1, *2, *3, *4)
DISABLE 15 60
Hexadecimal 30h 30h 31h 35h 36h 30h
Character 0 0 1 5 6 0
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 41h 46h 3Ah *1 *3 03h
Character O A F : *2 *4
Acceptability
SECURITY STANDBY NO SIGNAL
× ○ ○ ○ ○
*1 *3 *5 03h
AV M UTE REMOTE
*1 *3 03h
AV M UTE REMOTE
2.49. INITIAL START UP
Hexadecimal 02h 4Fh 50h 59h 3Ah
Character O P Y : *2
Parameters (*1, *2)
STANDBY ON LAST MEMORY
Hexadecimal 30h 31h 32h
Character 0 1 2
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 50h 59h 3Ah *1 03h
Character C P Y : *2
Acceptability
SECURITY STANDBY NO SIGNAL
× × ○ ○ ○
2.50. AUTO SETUP setting
Hexadecimal 02h 4Fh 53h 53h 3Ah
Character O S S : *2
Parameters (*1, *2)
BUTTON AUTO
Hexadecimal 30h 31h
Character 0 1
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 53h 53h 3Ah *1 03h
Character O S S : *2
Acceptability
SECURITY STANDBY NO SIGNAL
× ○ ○ ○ ○
*1 03h
AV M UTE REMOTE
*1 03h
AV M UTE REMOTE
16/49
2.51. SIGNAL SEARCH
Hexadecimal 02h 4Fh 53h 52h 3Ah
Character O S R : *2
Parameters (*1, *2)
OFF ON
Hexadecimal 30h 31h
Character 0 1
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 53h 52h 3Ah *1 03h
Character O S R : *2
Acceptability
SECURITY STANDBY NO SIGNAL
× ○ ○ ○ ○
2.52. INSTALLATION
Hexadecimal 02h 4Fh 49h 4Ch 3Ah
Character O I L : *2
Parameters (*1, *2)
FRONT/DESK REAR/DESK FRONT / CEILING REAR/CEILING
Hexadecimal 30h 31h 32h 33h
Character 0 1 2 3
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 49h 4Ch 3Ah *1 03h
Character O I L : *2
Acceptability
SECURITY STANDBY NO SIGNAL
× ○ ○ × ○
*1 03h
AV M UTE REMOTE
*1 03h
AV M UTE REMOTE
2.53. HIGH ALTITUDE MODE
Hexadecimal 02h 4Fh 46h 4Dh 3Ah
Character O F M : *2
Parameters (*1, *2)
OFF ON
Hexadecimal 30h 31h
Character 0 1
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 46h 4Dh 3Ah *1 03h
Character O F M : *2
Acceptability
SECURITY STANDBY NO SIGNAL
× ○ ○ ○ ○
2.54. OSD DESIGN
Hexadecimal 02h 4Dh 4Fh 44h 3Ah
Character M O D : *2
Parameters (*1, *2)
TYPE1 TYPE2 TYPE3
Hexadecimal 30h 31h 32h
Character 0 1 2
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Dh 4Fh 44h 3Ah *1 03h
Character M O D : *2
Acceptability
SECURITY STANDBY NO SIGNAL
× ○ ○ ○ ○
*1 03h
AV M UTE REMOTE
*1 03h
AV M UTE REMOTE
17/49
2.55. SXGA MODE
Hexadecimal 02h 4Fh 53h 58h 3Ah
Character O S X : *2
Parameters (*1, *2)
SXGA SXGA+
Hexadecimal 30h 31h
Character 0 1
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 53h 58h 3Ah *1 03h
Character O S X : *2
Acceptability
SECURITY STANDBY NO SIGNAL
× × × × ○
2.56. WIDE MODE
Hexadecimal 02h 4Fh 58h 47h 3Ah
Character O X G : *2
Parameters (*1, *2)
OFF ON AUTO
Hexadecimal 30h 31h 32h
Character 0 1 2
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 58h 47h 3Ah *1 03h
Character O X G : *2
Acceptability
SECURITY STANDBY NO SIGNAL
× × × × ○
*1 03h
AV M UTE REMOTE
*1 03h
AV M UTE REMOTE
2.57. BACK COLOR
Hexadecimal 02h 4Fh 42h 43h 3Ah
Character O B C : *2
Parameters (*1, *2)
BLUE BLACK
Hexadecimal 30h 31h
Character 0 1
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 42h 43h 3Ah *1 03h
Character O B C : *2
Acceptability
SECURITY STANDBY NO SIGNAL
× ○ ○ × ○
2.58. VOLUME
Hexadecimal 02h 41h 56h 4Ch 3Ah
Character A V L : *2 *4 *6
Parameters (*1, *2, *3, *4, *5, *6)
Hexadecimal 30h 30h 30h 30h 30h 31h 30h 30h 32h
Character 0 0 0 0 0 1 0 0 2
Hexadecimal 30h 36h 31h 30h 36h 32h 30h 36h 33h
Character 0 6 1 0 6 2 0 6 3
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 41h 56h 4Ch 3Ah *1 *3 *5 03h
Character A V L : *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
× △ × × ○
Note:
• During STANDBY, this command is available only when IN STANDBY MODE is ON.
*1 03h
AV M UTE REMOTE
*1 *3 *5 03h
0 1 2
61 62 63
AV M UTE REMOTE
18/49
2.59. BALANCE
Hexadecimal 02h 41h 42h 4Ch 3Ah
Character A B L : *2 *4 *6
Parameters (*1, *2, *3, *4, *5, *6)
－16 －15 －14
Hexadecimal 2Dh 31h 36h 2Dh 31h 35h 2Dh 31h 34h
Character － 1 6 － 1 5 － 1 4
14 15 16
Hexadecimal 30h 31h 34h 30h 31h 35h 30h 31h 36h
Character 0 1 4 0 1 5 0 1 6
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 41h 42h 4Ch 3Ah *1 *3 *5 03h
Character A B L : *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
× △ × × ○
Note:
• During STANDBY, this command is available only when IN STANDBY MODE is ON.
2.60. AV MUTE setting
Hexadecimal 02h 41h 4Dh 54h 3Ah *1 03h
Character A M T : *2
Parameters (*1, *2)
OFF ON
Hexadecimal 30h 31h
Character 0 1
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 41h 4Dh 54h
Character A M T : *2
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
× △ × × ○
Note:
• During STANDBY, this command is available only when IN STANDBY MODE is ON.
*1 *3 *5 03h
AV M UTE REMOTE
3Ah *1 03h
2.61. WIRELESS LAN
Hexadecimal 02h 4Fh 4Eh 53h 3Ah
Character O N S : *2 *4 *6
Parameters (*1, *2, *3, *4, *5, *6,)
OFF 1 2
Hexadecimal 30h 30h 30h 30h 30h 31h 30h 30h 32h
Character 0 0 0 0 0 1 0 0 2
3 4 USER1
Hexadecimal 30h 30h 33h 30h 30h 34h 30h 30h 35h
Character 0 0 3 0 0 4 0 0 5
USER2 USER3 S-MAP
Hexadecimal 30h 30h 36h 30h 30h 37h 30h 30h 38h
Character 0 0 6 0 0 7 0 0 8
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 4Eh 53h 3Ah *1 *3 *5 03h
Character O N S : *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
× × × × ○
Note:
AV M UTE REMOTE
*1 *3 *5 03h
• This command is available only for PT-FW300NT**/F300NT**.
19/49
2.62. Wireless LAN OFF
Hexadecimal 02h 4Fh 52h 43h 3Ah
Character O R C : *2
Parameters (*1, *2)
OFF
Hexadecimal 31h
Character 1
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 52h 43h 3Ah *1 03h
Character O R C : *2
Acceptability
SECURITY STANDBY NO SIGNAL
× × ○ × ○
Note:
• This command is available only for PT-FW300NT**/F300NT**.
2.63. Set Date
Hexadecimal 02h 54h 53h 44h 3Ah
Character T S D :
Hexadecimal *y1 *y2 *y3 *y4 *m1 *m2 *d1 *d2 *w 03h
Character
Parameters
*y1 - *y4: Year (4 digits)
*m1, *m2: Month (2 digits)
*d1, *d2: Day (2 digits)
*w: Day of the week (Mon = 1, Tue = 2, Wed = 3, Thu = 4, Fri = 5, Sat = 6, Sun = 7)
Set it by UTC (Coordinated Universal Time).
Example: Tuesday, April 1, 2008
*y1 *y2 *y3 *y4 *m1 *m2 *d1 *d2 *w
Hexadecimal 32h 30h 30h 38h 30h 34h 30h 31h 32h
Character 2 0 0 8 0 4 0 1 2
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 54h 53h 44h 3Ah *y1 *y2
Character T S D :
Hexadecimal *y3 *y4 *m1 *m2 *d1 *d2 *w 03h
Character
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
× ○ ○ ○ ○
*1 03h
AV M UTE REMOTE
2.64. Set Time
Hexadecimal 02h 54h 53h 54h 3Ah
Character T S T :
Hexadecimal *h1 *h2 *m1 *m2 *s1 *s2 03h
Character
Parameters
*h1, *h2: Hour (2 digits)
*m1, *m2: Minute (2 digits)
*s1, *s2: Second (2 digits)
Set it by UTC (Coordinated Universal Time).
Example: 3 seconds at 3:45 p.m.
*h1 *h2 *m1 *m2 *s1 *s2
Hexadecimal 31h 35h 34h 35h 30h 33h
Character 1 5 4 5 0 3
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 54h 53h 54h 3Ah
Character T S T :
Hexadecimal *h1 *h2 *m1 *m2 *s1 *s2 03h
Character
Acceptability
SECURITY STANDBY NO SIGNAL
× ○ ○ ○ ○
AV M UTE REMOTE
20/49
2.65. REWIND ALL FILTER / Rewinding interval setting
Hexadecimal 02h 4Dh 46h 53h 3Ah *1 03h
Character M F S : *2
Parameters (*1, *2)
REWIND 100H 400H
Hexadecimal 30h 31h 32h
Character 0 1 2
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Dh 46h 53h 3Ah
Character M F S : *2
Acceptability
SECURITY STANDBY NO SIGNAL
× × ○ × ○
AV M UTE REMOTE
2.66. FUNCTION
Hexadecimal 02h 46h 43h 31h 03h
Character F C 1
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 46h 43h 31h 03h
Character F C 1
Acceptability
SECURITY STANDBY NO SIGNAL
× × ○ × ○
AV M UTE REMOTE
*1 03h
2.67. SIDE BY SIDE
Hexadecimal 02h 4Fh 44h 57h 03h
Character O D W
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 44h 57h 03h
Character O D 1
Acceptability
SECURITY STANDBY NO SIGNAL
× × ○ × ○
Note:
• This command is available only for PT-FW300 series.
2.68. CLOSED CAPTION SETTING
Hexadecimal 02h 4Fh 43h 43h 3Ah *1 03h
Character O C C : *2
Parameters (*1, *2)
OFF CC1 CC2 CC3 CC4
Hexadecimal 30h 31h 32h 33h 34h
Character 0 1 2 3 4
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 43h 43h 3Ah
Character O C C : *2
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
× × × × ○
Note:
• Only when the model is PT-FW300NTU/FW300U/F300NTU/F300U, and the input signal is 480i (YPbPr) or
NTSC, this command is available.
AV M UTE REMOTE
*1 03h
21/49
2.69. EDID Setting
Hexadecimal 02h 4Fh 45h 44h 3Ah *1 03h
Character O E D : *2
Parameters (*1, *2)
Hexadecimal 31h 32h
Character 1 2
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 45h 44h 3Ah
Character O E D : *2
Acceptability
SECURITY STANDBY NO SIGNAL
2.70. RGB/YPbPr
Hexadecimal 02h 4Fh 52h 46h 3Ah *1 03h
Character O R F : *2
Parameters (*1, *2)
Hexadecimal 30h 31h 32h
Character 0 1 2
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 52h 46h 3Ah
Character O R F : *2
Acceptability
SECURITY STANDBY NO SIGNAL
EDID1 (Moving image) EDID2 (PC)
*1 03h
AV M UTE REMOTE
× ○ ○ ○ ○
RGB YPbPr AUTO
*1 03h
AV M UTE REMOTE
× ○ × × ○
2.71. FUNCTION BUTTON
Hexadecimal 02h 4Fh 46h 43h 3Ah *1 03h
Character O F C : *2
Parameters (*1, *2)
DISABLE ASPECT PICTURE MODE DAYLIGHT VIEW CLOSED CAPTION
Hexadecimal 30h 31h 32h 33h 34h
Character 0 1 2 3 4
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 46h 43h 3Ah
Character O F C : *2
Acceptability
SECURITY STANDBY NO SIGNAL
× ○ ○ ○ ○
Note:
• CLOSED CAPTION is available only for PT-FW300NTU/FW300U/F300NTU/F300U.
2.72. SCREEN FORMAT
Hexadecimal 02h 56h 53h 46h 3Ah *1 03h
Character V S F : *2
Parameters (*1, *2)
16:10 16:9
Hexadecimal 30h 31h
Character 0 1
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 56h 53h 46h 3Ah
Character V S F : *2
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
× × ○ × ○
Note:
• This command is available only for PT-FW300 series.
*1 03h
AV M UTE REMOTE
*1 03h
22/49
2.73. OVER SCAN
Hexadecimal 02h 4Dh 4Fh 56h 3Ah *1 03h
Character M O V : *2
Parameters (*1, *2)
0 1 2 3
Hexadecimal 30h 31h 32h 33h
Character 0 1 2 3
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Dh 4Fh 56h 3Ah
Character M O V : *2
Acceptability
SECURITY STANDBY NO SIGNAL
× × × × ○
Note:
• This command is available only when moving image is displayed. In other cases, ER401 is returned.
2.74. SELF CHECK display
Hexadecimal 02h 4Fh 53h 43h 03h
Character O S C
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 53h 43h 03h
Character O S C
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
○ × ○ × ○
*1 03h
AV M UTE REMOTE
2.75. EXT OPTION display
Hexadecimal 02h 4Fh 48h 4Dh 03h
Character O H M
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 48h 4Dh 03h
Character O H M
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
○ × ○ × ○
2.76. VGA60/480p setting
Hexadecimal 02h 4Fh 56h 35h 3Ah *1 03h
Character O V 5 : *2
Parameters (*1, *2)
VGA60 480p AUTO
Hexadecimal 30h 31h 32h
Character 0 1 2
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 56h 35h 3Ah
Character O V 5 : *2
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
× × × × ○
*1 03h
23/49
2.77. TEST PATTERN display
Hexadecimal 02h 4Fh 53h 56h 03h
Character O S V
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 53h 56h 03h
Character O S V
Acceptability
SECURITY STANDBY NO SIGNAL
× × ○ ○ ○
2.78. DIGITAL CINEMA REALITY
Hexadecimal 02h 4Fh 50h 44h 3Ah *1 03h
Character O P D : *2
Parameters (*1, *2)
OFF ON
Hexadecimal 30h 31h
Character 0 1
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Fh 50h 44h 3Ah
Character O P D : *2
Acceptability
SECURITY STANDBY NO SIGNAL
× × × × ○
Note:
• This command is available only when an interlaced signal is inputted. In other cases, ER401 is returned.
AV M UTE REMOTE
*1 03h
AV M UTE REMOTE
2.79. KEYSTONE selected item display
Hexadecimal 02h 75h 83h 84h 03h
Character K S T
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 75h 83h 84h 03h
Character K S T
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
○ × ○ × ○
2.80. IN STANDBY MODE
Hexadecimal 02h 56h 58h 58h 3Ah 41h 53h 42h 49h
Character V X X : A S B I
Hexadecimal 30h 3Dh 2Dh *1 *3 *5 *7 *9 03h
Character 0 = + *2 *4 *6 *8 *10
Parameters (*1, *2, *3, *4, *5, *6, *7, *8, *9, *10)
OFF
Hexadecimal 30h 30h 30h 30h 30h
Character 0 0 0 0 0
ON
Hexadecimal 30h 30h 30h 30h 31h
Character 0 0 0 0 1
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 56h 58h 58h 3Ah 41h 53h 42h 49h
Character V X X : A S B I
Hexadecimal 30h 3Dh 2Dh *1 *3 *5 *7 *9 03h
Character 0 = + *2 *4 *6 *8 *10
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
× ○ ○ ○ ○
24/49
2.81. DVI SIGNAL LEVEL
Hexadecimal 02h 56h 58h 58h 3Ah 44h 56h 49h 49h
Character V X X : D V I I
Hexadecimal 30h 3Dh 2Dh *1 *3 *5 *7 *9 03h
Character 0 = + *2 *4 *6 *8 *10
Parameters (*1, *2, *3, *4, *5, *6, *7, *8, *9, *10)
0-255:PC
Hexadecimal 30h 30h 30h 30h 30h
Character 0 0 0 0 0
16-235
Hexadecimal 30h 30h 30h 30h 31h
Character 0 0 0 0 1
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 56h 58h 58h 3Ah 44h 56h 49h 49h
Character V X X : D V I I
Hexadecimal 30h 3Dh 2Dh *1 *3 *5 *7 *9 03h
Character 0 = + *2 *4 *6 *8 *10
Acceptability
SECURITY STANDBY NO SIGNAL
× × × ○ ○
2.82. WARNING MESSAGE
Hexadecimal 02h 56h 58h 58h 3Ah 57h 4Dh 44h 49h
Character V X X : W M D I
Hexadecimal 30h 3Dh 2Dh *1 *3 *5 *7 *9 03h
Character 0 = + *2 *4 *6 *8 *10
Parameters (*1, *2, *3, *4, *5, *6, *7, *8, *9, *10)
OFF
Hexadecimal 30h 30h 30h 30h 30h
Character 0 0 0 0 0
ON
Hexadecimal 30h 30h 30h 30h 31h
Character 0 0 0 0 1
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 56h 58h 58h 3Ah 57h 4Dh 44h 49h
Character V X X : W M D I
Hexadecimal 30h 3Dh 2Dh *1 *3 *5 *7 *9 03h
Character 0 = + *2 *4 *6 *8 *10
Acceptability
SECURITY STANDBY NO SIGNAL
× × ○ ○ ○
AV M UTE REMOTE
AV M UTE REMOTE
25/49
2.83. SCREEN POSITION
Hexadecimal 02h 56h 58h 58h 3Ah 56h 53h 50h 49h
Character V X X : V S P I
Hexadecimal 31h 3Dh 2Dh *1 *3 *5 *7 *9 03h
Character 1 = + *2 *4 *6 *8 *10
Parameters (*1, *2, *3, *4, *5, *6, *7, *8, *9, *10)
LOW
Hexadecimal 30h 30h 30h 30h 30h
Character 0 0 0 0 0
CENTER
Hexadecimal 30h 30h 30h 30h 31h
Character 0 0 0 0 1
HIGH
Hexadecimal 30h 30h 30h 30h 32h
Character 0 0 0 0 2
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 56h 58h 58h 3Ah 56h 53h 50h 49h
Character V X X : V S P I
Hexadecimal 30h 3Dh 2Dh *1 *3 *5 *7 *9 03h
Character 0 = + *2 *4 *6 *8 *10
Acceptability
SECURITY STANDBY NO SIGNAL
× × ○ × ○
Note:
• This command is available only for PT-FW300 series.
AV M UTE REMOTE
26/49
2.84. EMULATE
Hexadecimal 02h 56h 58h 58h 3Ah 45h 4Dh 55h 49h
Character V X X : E M U I
Hexadecimal 30h 3Dh 2Dh *1 *3 *5 *7 *9 03h
Character 0 = + *2 *4 *6 *8 *10
Parameters (*1, *2, *3, *4, *5, *6, *7, *8, *9, *10)
Hexadecimal 30h 30h 30h 30h 31h
Hexadecimal 30h 30h 30h 30h 32h
Hexadecimal 30h 30h 30h 30h 33h
Hexadecimal 30h 30h 30h 30h 34h
Hexadecimal 30h 30h 30h 30h 35h
Hexadecimal 30h 30h 30h 30h 36h
Hexadecimal 30h 30h 30h 30h 37h
Hexadecimal 30h 30h 30h 30h 38h
Hexadecimal 30h 30h 30h 30h 39h
Response (Callback)
In the period when the command can be accepted
Acceptability
SECURITY STANDBY NO SIGNAL
DEFAULT
Character 0 0 0 0 1
D3500
Character 0 0 0 0 2
D4000
Character 0 0 0 0 3
D/W5K series
Character 0 0 0 0 4
L730
Character 0 0 0 0 5
L780
Character 0 0 0 0 6
L735
Character 0 0 0 0 7
L785
Character 0 0 0 0 8
LB/W80
Character 0 0 0 0 9
Hexadecimal 02h 56h 58h 58h 3Ah 45h 4Dh 55h 49h
Character V X X : E M U I
Hexadecimal 30h 3Dh 2Dh *1 *3 *5 *7 *9 03h
Character 0 = + *2 *4 *6 *8 *10
AV M UTE REMOTE
× × ○ ○ ○
27/49
2.85. AUDIO SETTING
Hexadecimal 02h 56h 58h 58h 3Ah 41h 49h 4Eh 49h
Character V X X : A I N I
Hexadecimal *1 3Dh 2Dh *3 *5 *7 *9 *11 03h
Character *2 = + *4 *6 *8 *10 *12
Parameters (*1, *2)
COMPUTER1
Hexadecimal 30h
Character 0
COMPUTER2
Hexadecimal 31h
Character 1
DVI
Hexadecimal 32h
Character 2
Parameters (*3, *4, *5, *6, *7, *8, *9, *10, *11, *12)
COM.AUDIO IN
Hexadecimal 30h 30h 30h 30h 30h
Character 0 0 0 0 0
AUDIO IN
Hexadecimal 30h 30h 30h 30h 31h
Character 0 0 0 0 1
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 56h 58h 58h 3Ah 41h 49h 4Eh 49h
Character V X X : A I N I
Hexadecimal 30h 3Dh 2Dh *1 *3 *5 *7 *9 03h
Character 0 = + *2 *4 *6 *8 *10
Acceptability
SECURITY STANDBY NO SIGNAL
× × ○ × ○
AV M UTE REMOTE
2.86. Query Power
Hexadecimal 02h 51h 50h 57h 03h
Character Q P W
Response (Callback)
OFF
Hexadecimal 02h 30h 30h 31h 03h
Character 0 0 0
ON
Hexadecimal 02h 30h 30h 31h 03h
Character 0 0 1
Acceptability
SECURITY STANDBY NO SIGNAL
○ ○ ○ ○ ○
2.87. Query Lamp Status
Hexadecimal 02h 51h 24h 53h 03h
Character Q $ S
Response (Callback)
Lamp OFF
Hexadecimal 02h 30h 03h
Character 0
In turning ON
Hexadecimal 02h 31h 03h
Character 1
Lamp ON
Hexadecimal 02h 32h 03h
Character 2
In turning OFF
Hexadecimal 02h 33h 03h
Character 3
Acceptability
SECURITY STANDBY NO SIGNAL
○ ○ ○ ○ ○
AV M UTE REMOTE
AV M UTE REMOTE
28/49
2.88. Query INPUT SELECT
Hexadecimal 02h 51h 49h 4Eh 03h
Character Q I N
Response (Callback)
COMPUTER1
Hexadecimal 02h 52h 47h 31h 03h
Character R G 1
COMPUTER2
Hexadecimal 02h 52h 47h 32h 03h
Character R G 2
VIDEO
Hexadecimal 02h 56h 49h 44h 03h
Character V I D
S-VIDEO
Hexadecimal 02h 53h 56h 44h 03h
Character S V D
DVI
Hexadecimal 02h 44h 56h 49h 03h
Character D V I
NETWORK
Hexadecimal 02h 4Eh 57h 50h 03h
Character N W P
Acceptability
SECURITY STANDBY NO SIGNAL
○ × ○ ○ ○
AV M UTE REMOTE
2.89. Query AV MUTE
Hexadecimal 02h 51h 53h 48h 03h
Character Q S H
Response (Callback)
OFF
Hexadecimal 02h 31h 03h
Character 0
ON
Hexadecimal 02h 31h 03h
Character 1
Acceptability
SECURITY STANDBY NO SIGNAL
○ × ○ ○ ○
2.90. Query FREEZE
Hexadecimal 02h 51h 46h 5Ah 03h
Character Q F Z
Response (Callback)
OFF
Hexadecimal 02h 30h 03h
Character 0
ON
Hexadecimal 02h 31h 03h
Character 1
Acceptability
SECURITY STANDBY NO SIGNAL
○ × × ○ ○
AV M UTE REMOTE
AV M UTE REMOTE
29/49
2.91. Query INDEX-window
Hexadecimal 02h 51h 49h 58h 03h
Character Q I X
Response (Callback)
OFF
Hexadecimal 02h 30h 03h
Character 0
50%
Hexadecimal 02h 31h 03h
Character 1
75%
Hexadecimal 02h 32h 03h
Character 2
100%
Hexadecimal 02h 33h 03h
Character 3
Acceptability
SECURITY STANDBY NO SIGNAL
○ × × ○ ○
2.92. Query AUTO SETUP
Hexadecimal 02h 51h 41h 53h 03h
Character Q A S
Response (Callback)
OFF
Hexadecimal 02h 30h 03h
Character 0
In execution
Hexadecimal 02h 31h 03h
Character 1
Acceptability
SECURITY STANDBY NO SIGNAL
○ ○ ○ ○ ○
AV M UTE REMOTE
AV M UTE REMOTE
2.93. Query PICTURE MODE
Hexadecimal 02h 51h 50h 4Dh 03h
Character Q P M
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 *3 *5 03h
Character *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
○ × × ○ ○
Parameters (*1, *2, *3, *4, *5, *6)
DYNAMIC NATURAL STANDARD BLACKBOARD
Hexadecimal 44h 59h 4Eh 4Eh 41h 54h 53h 54h 44h 42h 42h 44h
Character D Y N N A T S T D B B D
CINEMA
43h 49h 4Eh
C I N
Note:
AV M UTE REMOTE
• Parameters "NAT" is not returned when the input signal is moving image. And parameters "CIN" is not returned
when the input signal is still image.
30/49
2.94. Query CONTRAST
Hexadecimal 02h 51h 56h 52h 03h
Character Q V R
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 *3 *5 03h
Character *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
○ × × ○ ○
Parameters (*1, *2, *3, *4, *5, *6)
－32 －31 －30
Hexadecimal 2Dh 33h 32h 2Dh 33h 31h 2Dh 33h 30h
Character － 3 2 － 3 1 － 3 0
30 31 32
Hexadecimal 30h 33h 30h 30h 33h 31h 30h 33h 32h
Character 0 3 0 0 3 1 0 3 2
2.95. Query BRIGHTNESS
Hexadecimal 02h 51h 56h 42h 03h
Character Q V B
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 *3 *5 03h
Character *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
○ × × ○ ○
Parameters (*1, *2, *3, *4, *5, *6)
－32 －31 －30
Hexadecimal 2Dh 33h 32h 2Dh 33h 31h 2Dh 33h 30h
Character － 3 2 － 3 1 － 3 0
30 31 32
Hexadecimal 30h 33h 30h 30h 33h 31h 30h 33h 32h
Character 0 3 0 0 3 1 0 3 2
AV M UTE REMOTE
AV M UTE REMOTE
2.96. Query COLOR
Hexadecimal 02h 51h 56h 43h 03h
Character Q V C
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 *3 *5 03h
Character *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
○ × × ○ ○
Parameters (*1, *2, *3, *4, *5, *6)
－32 －31 －30
Hexadecimal 2Dh 33h 32h 2Dh 33h 31h 2Dh 33h 30h
Character － 3 2 － 3 1 － 3 0
30 31 32
Hexadecimal 30h 33h 30h 30h 33h 31h 30h 33h 32h
Character 0 3 0 0 3 1 0 3 2
Note:
AV M UTE REMOTE
• This command is acceptable when the input is VIDEO or S-VIDEO. And when the input is COMPUTER1,
COMPUTER2 or DVI, and moving image is displayed, it is acceptable. In other cases, ER401 is returned.
31/49
2.97. Query TINT
Hexadecimal 02h 51h 56h 54h 03h
Character Q V T
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 *3 *5 03h
Character *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
○ × × ○ ○
Parameters (*1, *2, *3, *4, *5, *6)
－32 －31 －30
Hexadecimal 2Dh 33h 32h 2Dh 33h 31h 2Dh 33h 30h
Character － 3 2 － 3 1 － 3 0
30 31 32
Hexadecimal 30h 33h 30h 30h 33h 31h 30h 33h 32h
Character 0 3 0 0 3 1 0 3 2
Note:
• This command is acceptable when the input is VIDEO or S-VIDEO. And when the input is COMPUTER1,
COMPUTER2 or DVI, and moving image is displayed, it is acceptable. In other cases, ER401 is returned.
2.98. Query SHARPNESS
Hexadecimal 02h 51h 56h 53h 03h
Character Q V S
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 *3 *5 03h
Character *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
○ × × ○ ○
Parameters (*1, *2, *3, *4, *5, *6)
－08 －07 －06
Hexadecimal 2Dh 30h 38h 2Dh 30h 37h 2Dh 30h 36h
Character － 0 8 － 0 7 － 0 6
13 14 015
Hexadecimal 30h 31h 33h 30h 31h 34h 30h 31h 35h
Character 0 1 3 0 1 4 0 1 5
AV M UTE REMOTE
AV M UTE REMOTE
2.99. Query COLOR TEMPERATURE
Hexadecimal 02h 51h 54h 45h 03h
Character Q T E
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 03h
Character *2
Acceptability
SECURITY STANDBY NO SIGNAL
○ × × ○ ○
Parameters (*1, *2)
LOW DEFAULT
Hexadecimal 30h 31h 32h
Character 0 1 2
AV M UTE REMOTE
HIGH
32/49
2.100. Query DAYLIGHT VIEW
Hexadecimal 02h 51h 56h 58h 3Ah 44h 4Ch 56h 49h 30h
Character Q V X : D L V I 0
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 44h 4Ch 56h 49h 30h 3Dh 2Dh
Character D L V I 0 = +
Hexadecimal *1 *3 *5 *7 *9 03h
Character *2 *4 *6 *8 *10
Acceptability
SECURITY STANDBY NO SIGNAL
○ × × ○ ○
Parameters (*1, *2, *3, *4, *5, *6, *7, *8, *9, *10)
FRONT INSTALLATION
OFF
Hexadecimal 30h 30h 30h 30h 30h
Character 0 0 0 0 0
AUTO
Hexadecimal 30h 30h 30h 30h 31h
Character 0 0 0 0 1
ON
Hexadecimal 30h 30h 30h 30h 32h
Character 0 0 0 0 2
REAR INSTALLATION
OFF
Hexadecimal 30h 30h 30h 30h 30h
Character 0 0 0 0 0
ON
Hexadecimal 30h 30h 30h 30h 31h
Character 0 0 0 0 1
AV M UTE REMOTE
2.101. Query TV-SYSTEM
Hexadecimal 02h 51h 53h 47h 03h
Character Q S G
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 *3 *5 03h
Character *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
○ × ○ ○ ○
Parameters (*1, *2, *3, *4, *5, *6)
AUTO NTSC NTSC4.43 PAL
Hexadecimal 41h 55h 54h 4Eh 54h 53h 4Eh 34h 34h 50h 41h 4Ch
Character A U T N T S N 4 4 P A L
PAL-M PAL-N SECAM
Hexadecimal 50h 41h 4Dh 50h 41h 4Eh 53h 45h 43h
Character P A M P A N S E C
Note:
• This command is acceptable only when the input is VIDEO or S-VIDEO. In other cases, ER401 is returned.
2.102. Query NOISE REDUCTION
Hexadecimal 02h 51h 4Eh 52h 03h
Character Q N R
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 03h
Character *2
Acceptability
SECURITY STANDBY NO SIGNAL
○ × × ○ ○
Parameters (*1, *2)
OFF
Hexadecimal 30h 31h
Character 0 1
Note:
• This command is acceptable only when the input is VIDEO or S-VIDEO. In other cases, ER401 is returned.
AV M UTE REMOTE
AV M UTE REMOTE
ON
33/49
2.103. Query WHITE BALANCE RED
Hexadecimal 02h 51h 57h 52h 03h
Character Q W R
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 *3 *5 03h
Character *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
○ × × ○ ○
Parameters (*1, *2, *3, *4, *5, *6)
－32 －31 －30
Hexadecimal 2Dh 33h 32h 2Dh 33h 31h 2Dh 33h 30h
Character － 3 2 － 3 1 － 3 0
30 31 32
Hexadecimal 30h 33h 30h 30h 33h 31h 30h 33h 32h
Character 0 3 0 0 3 1 0 3 2
Note:
• Only when the input is DVI, COMPUTER1 or COMPUTER2, and still image is displayed, this command is
acceptable. In other cases, ER401 is returned.
2.104. Query WHITE BALANCE GREEN
Hexadecimal 02h 51h 57h 47h 03h
Character Q W G
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 *3 *5 03h
Character *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
○ × × ○ ○
Parameters (*1, *2, *3, *4, *5, *6)
－32 －31 －30
Hexadecimal 2Dh 33h 32h 2Dh 33h 31h 2Dh 33h 30h
Character － 3 2 － 3 1 － 3 0
30 31 32
Hexadecimal 30h 33h 30h 30h 33h 31h 30h 33h 32h
Character 0 3 0 0 3 1 0 3 2
Note:
• Only when the input is DVI, COMPUTER1 or COMPUTER2, and still image is displayed, this command is
acceptable. In other cases, ER401 is returned.
AV M UTE REMOTE
AV M UTE REMOTE
2.105. Query WHITE BALANCE BLUE
Hexadecimal 02h 51h 57h 42h 03h
Character Q W B
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 *3 *5 03h
Character *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
○ × × ○ ○
Parameters (*1, *2, *3, *4, *5, *6)
－32 －31 －30
Hexadecimal 2Dh 33h 32h 2Dh 33h 31h 2Dh 33h 30h
Character － 3 2 － 3 1 － 3 0
30 31 32
Hexadecimal 30h 33h 30h 30h 33h 31h 30h 33h 32h
Character 0 3 0 0 3 1 0 3 2
Note:
AV M UTE REMOTE
• Only when the input is DVI, COMPUTER1 or COMPUTER2, and still image is displayed, this command is
acceptable. In other cases, ER401 is returned.
34/49
2.106. Query KEYSTONE
Hexadecimal 02h 51h 4Bh 53h 03h
Character Q K S
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 *3 *5 03h
Character *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
○ ○ ○ ○ ○
Parameters (*1, *2, *3, *4, *5, *6)
－32 －31 －30
Hexadecimal 2Dh 33h 32h 2Dh 33h 31h 2Dh 33h 30h
Character － 3 2 － 3 1 － 3 0
30 31 32
Hexadecimal 30h 33h 30h 30h 33h 31h 30h 33h 32h
Character 0 3 0 0 3 1 0 3 2
2.107. Query SHIFT H
Hexadecimal 02h 51h 48h 50h 03h
Character Q H P
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 *3 *5 03h
Character *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
○ × × ○ ○
Parameters (*1, *2, *3, *4, *5, *6)
－127 －126 －125
Hexadecimal 2Dh 31h 32h 37h 2Dh 31h 32h 36h 2Dh 31h 32h 35h
Character － 1 2 7 － 1 2 6 － 1 2 5
125 126 127
Hexadecimal 31h 32h 35h 31h 32h 36h 31h 32h 37h
Character 1 2 5 1 2 6 1 2 7
Note:
• This command is not acceptable when the input is NETWORK.
AV M UTE REMOTE
AV M UTE REMOTE
2.108. Query SHIFT V
Hexadecimal 02h 51h 56h 50h 03h
Character Q V P
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 *3 *5 03h
Character *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
○ × × ○ ○
Parameters (*1, *2, *3, *4, *5, *6)
－64 －63 －62
Hexadecimal 2Dh 36h 34h 2Dh 36h 33h 2Dh 36h 32h
Character － 6 4 － 6 3 － 6 2
62 63 64
Hexadecimal 36h 32h 36h 33h 36h 34h
Character 6 2 6 3 6 4
Note:
• This command is acceptable except when the input is NETWORK. Or, this command is acceptable when the
input is NETWORK and ASPECT is H-FIT (for FW300 series only). In other cases, ER401 is returned.
35/49
2.109. Query DOT CLOCK
Hexadecimal 02h 51h 44h 43h 03h
Character Q D C
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 *3 *5 03h
Character *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
○ × × ○ ○
Parameters (*1, *2, *3, *4, *5, *6)
－32 －31 －30
Hexadecimal 2Dh 33h 32h 2Dh 33h 31h 2Dh 33h 30h
Character － 3 2 － 3 1 － 3 0
30 31 32
Hexadecimal 30h 33h 30h 30h 33h 31h 30h 33h 32h
Character 0 3 0 0 3 1 0 3 2
Note:
• Only when the input is COMPUTER1 or COMPUTER2, and still image is displayed, this command is acceptable.
In other cases, ER401 is returned.
2.110. Query CLOCK PHASE
Hexadecimal 02h 51h 43h 50h 03h
Character Q C P
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 *3 *5 03h
Character *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
○ × × ○ ○
Parameters (*1, *2, *3, *4, *5, *6)
－16 －15 －14
Hexadecimal 2Dh 31h 36h 2Dh 31h 36h 2Dh 31h 36h
Character － 1 6 － 1 6 － 1 4
14 15 16
Hexadecimal 30h 31h 34h 30h 31h 35h 30h 31h 36h
Character 0 1 4 0 1 5 0 1 6
Note:
• This command is acceptable only when the input is COMPUTER1 or COMPUTER2. In other cases, ER401 is
returned.
AV M UTE REMOTE
AV M UTE REMOTE
2.111. Query ASPECT
Hexadecimal 02h 51h 53h 31h 03h
Character Q S 1
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 03h
Character *2
Acceptability
SECURITY STANDBY NO SIGNAL
○ × × ○ ○
Parameters (*1, *2)
F300 series
AUTO 4:3 16:9 S4:3 THROUGH
Hexadecimal 30h 31h 32h 33h
Character 0 1 2 3 4
FW300 series
AUTO 4:3 16:9 H-FIT
Hexadecimal 30h 31h 32h 33h 34h 35h 36h
Character 0 1 2 3 4 5 6
AV M UTE REMOTE
34h
V-F IT HV-FIT THROUGH
36/49
2.112. Query FRAME LOCK
Hexadecimal 02h 51h 46h 4Ch 03h
Character Q F L
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 03h
Character *2
Acceptability
SECURITY STANDBY NO SIGNAL
○ × × ○ ○
Parameters (*1, *2)
OFF ON
Hexadecimal 30h 31h
Character 0 1
2.113. Query LANGUAGE
Hexadecimal 02h 51h 4Ch 47h 03h
Character Q L G
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 *3 *5 03h
Character *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
○ ○ ○ ○ ○
Parameters (*1, *2, *3, *4, *5, *6)
English German French
Hexadecimal 45h 4Eh 47h 44h 45h 55h 46h 52h 41h
Character E N G D E U F R A
Spanish Italian Japanese
Hexadecimal 45h 53h 50h 49h 54h 4Ch 4Ah 50h 4Eh
Character E S P I T L J P N
Chinese Russian Korean
Hexadecimal 43h 48h 49h 52h 55h 53h 4Bh 4Fh 52h
Character C H I R U S K O R
Portuguese Swedish Norwegian
Hexadecimal 50h 4Fh 52h 53h 56h 45h 4Eh 4Fh 52h
Character P O R S V E N O R
Danish Polish Czech
Hexadecimal 44h 41h 4Eh 50h 4Fh 4Ch 43h 45h 53h
Character D A N P O L C E S
Hungarian Thai
Hexadecimal 4Dh 41h 47h 54h 48h 41h
Character M A G T H A
AV M UTE REMOTE
AV M UTE REMOTE
2.114. Query INPUT GUIDE
Hexadecimal 02h 51h 44h 49h 03h
Character Q D I
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 03h
Character *2
Acceptability
SECURITY STANDBY NO SIGNAL
○ ○ ○ ○ ○
Parameters (*1, *2)
OFF SIMPLE DETAILED
Hexadecimal 30h 31h 32h
Character 0 1 2
AV M UTE REMOTE
37/49
Y
2.115. Query STARTUP LOGO
Hexadecimal 02h 51h 4Ch 4Fh 03h
Character Q L O
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 03h
Character *2
Acceptability
SECURITY STANDBY NO SIGNAL
○ ○ ○ ○ ○
Parameters (*1, *2)
OFF ON USER
Hexadecimal 30h 31h 32h
Character 0 1 2
2.116. Query COMPUTER2 SELECT
Hexadecimal 02h 51h 52h 49h 03h
Character Q R I
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 *3 *5 03h
Character *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
○ × ○ ○ ○
Parameters (*1, *2, *3, *4, *5, *6)
INPUT OUTPUT
Hexadecimal 32h 49h 4Eh 32h 4Fh 55h
Character 2 I N 2 O U
2.117. Query NO SIGNAL SHUT-OFF
Hexadecimal 02h 51h 41h 46h 03h
Character Q A F
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 *3 03h
Character *2 *4
Acceptability
SECURITY STANDBY NO SIGNAL
○ ○ ○ ○ ○
Parameters (*1, *2, *3, *4)
• The timer can be set to "DISABLE", or 15 to 60 minutes every 5 minutes.
• Examples of "DISABLE", "15 min." and "60 min." are below.
DISABLE 15 60
Hexadecimal 30h 30h 31h 35h 36h 30h
Character 0 0 1 5 6 0
AV M UTE REMOTE
AV M UTE REMOTE
AV M UTE REMOTE
2.118. Query INITIAL START UP
Hexadecimal 02h 51h 50h 59h 03h
Character Q P Y
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 03h
Character *2
Acceptability
SECURITY STANDBY NO SIGNAL
○ ○ ○ ○ ○
Parameters (*1, *2)
STANDBY ON LAST MEMOR
Hexadecimal 30h 31h 32h
Character 0 1 2
AV M UTE REMOTE
38/49
2.119. Query AUTO SETUP setting
Hexadecimal 02h 51h 53h 53h 03h
Character Q S S
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 03h
Character *2
Acceptability
SECURITY STANDBY NO SIGNAL
○ × ○ ○ ○
Parameters (*1, *2)
BUTTON AUTO
Hexadecimal 30h 31h
Character 0 1
2.120. Query SIGNAL SEARCH
Hexadecimal 02h 51h 53h 52h 03h
Character Q S R
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 03h
Character *2
Acceptability
SECURITY STANDBY NO SIGNAL
○ × ○ ○ ○
Parameters (*1, *2)
OFF ON
Hexadecimal 30h 31h
Character 0 1
AV M UTE REMOTE
AV M UTE REMOTE
2.121. Query INSTALLATION
Hexadecimal 02h 51h 53h 50h 03h
Character Q S P
Response (Callback)
Hexadecimal 02h *1 03h
Character *2
Parameters (*1, *2)
FRONT/DESK REAR/DESK FRONT/CEILING REAR/CEILING
Hexadecimal 30h 31h 32h 33h
Character 0 1 2 3
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
○ ○ ○ ○ ○
2.122. Query HIGH ALTITUDE MODE
Hexadecimal 02h 51h 46h 4Dh 03h
Character Q F M
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 03h
Character *2
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
○ ○ ○ ○ ○
Parameters (*1, *2)
OFF ON
Hexadecimal 30h 31h
Character 0 1
39/49
2.123. Query OSD DESIGN
Hexadecimal 02h 51h 4Fh 44h 03h
Character Q O D
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 03h
Character *2
Acceptability
SECURITY STANDBY NO SIGNAL
○ ○ ○ ○ ○
Parameters (*1, *2)
TYPE1 TYPE2 TYPE3
Hexadecimal 30h 31h 32h
Character 0 1 2
2.124. Query SXGA MODE
Hexadecimal 02h 51h 53h 58h 03h
Character Q S X
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 03h
Character *2
Acceptability
SECURITY STANDBY NO SIGNAL
○ × × ○ ○
Parameters (*1, *2)
SXGA SXGA+
Hexadecimal 30h 31h
Character 0 1
AV M UTE REMOTE
AV M UTE REMOTE
2.125. Query WIDE MODE
Hexadecimal 02h 51h 58h 47h 03h
Character Q X G
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 03h
Character *2
Acceptability
SECURITY STANDBY NO SIGNAL
○ × × ○ ○
Parameters (*1, *2)
OFF ON AUTO
Hexadecimal 30h 31h 32h
Character 0 1 2
2.126. Query BACK COLOR
Hexadecimal 02h 51h 42h 43h 03h
Character Q B C
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 03h
Character *2
Acceptability
SECURITY STANDBY NO SIGNAL
○ × ○ ○ ○
Parameters (*1, *2)
BLUE
Hexadecimal 30h 31h
Character 0 1
AV M UTE REMOTE
AV M UTE REMOTE
BLACK
40/49
2.127. Query VOLUME
Hexadecimal 02h 51h 41h 56h 03h
Character Q A V
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 *3 *5 03h
Character *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL
○ △ ○ ○ ○
Parameters (*1, *2, *3, *4, *5, *6)
0 1 2
Hexadecimal 30h 30h 30h 30h 30h 31h 30h 30h 32h
Character 0 0 0 0 0 1 0 0 2
61 62 63
Hexadecimal 30h 36h 31h 30h 36h 32h 30h 36h 33h
Character 0 6 1 0 6 2 0 6 3
Note:
• During STANDBY, this command is available only when IN STANDBY MODE is ON.
2.128. Query BALANCE
Hexadecimal 02h 51h 42h 4Ch 03h
Character Q B L
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 *3 *5 03h
Character *2 *4 *6
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
○ △ ○ ○ ○
Parameters (*1, *2, *3, *4, *5, *6)
－16 －15 －14
Hexadecimal 2Dh 31h 36h 2Dh 31h 35h 2Dh 31h 34h
Character － 1 6 － 1 5 － 1 4
14 15 16
Hexadecimal 30h 36h 31h 30h 31h 35h 30h 31h 36h
Character 0 1 4 0 1 5 0 1 6
Note:
• During STANDBY, this command is available only when IN STANDBY MODE is ON.
AV M UTE REMOTE
2.129. Query Date & Time
Hexadecimal 02h 51h 43h 54h 03h
Character Q C T
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *Y1 *Y2 *Y3 *Y4 *M1 *M2 *D1 *D2
Character
Hexadecimal *h1 *h2 *m1 *m2 *s1 *s2 *t1 *t2 03h
Character
Acceptability
SECURITY STANDBY NO SIGNAL
○ ○ ○ ○ ○
Parameters
*Y1 - *Y4: Year (4 digits)
*M1, *M2: Month (2 digits)
*D1, *D2: Day (2 digits)
*h1, *h2: Hour (2 digits)
*m1, *m2: Minute (2 digits)
*s1, *s2: Second (2 digits)
*t1, *t2: Time zone (2 digits)
Example: 0 second at 0:00 p.m. (+00:00), April 1, 2008
*Y1 *Y2 *Y3 *Y4 *M1 *M2 *D1 *D2
Hexadecimal 02h 32ｈ 30h 30h 38h 30h 34h 30ah 31h
Character 2 0 0 8 0 4 0 1
*h1 *h2 *m1 *m2 *s1 *s2 *t1 *t2
Hexadecimal 31h 32h 30h 30h 30h 30h 30h 64h 03h
Character 1 2 0 0 0 0 0 ｄ
AV M UTE REMOTE
41/49
2.130. Query Date
Hexadecimal 02h 51h 47h 44h 03h
Character Q G D
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *y1 *y2 *y3 *y4 *m1 *m2 *d1 *d2 *w 03h
Parameters (*1, *2, *3, *4, *5, *6)
*y1 - *y4: Year (4 digits)
*m1, *m2: Month (2 digits)
*d1, *d2: Day (2 digits)
*w: Day of the week (Mon = 1, Tue = 2, Wed = 3, Thu = 4, Fri = 5, Sat = 6, Sun = 7)
Set it by UTC (Coordinated Universal Time).
Example: Tuesday, April 1, 2008
Hexadecimal 32h 30h 30h 38h 30h 34h 30h 31h 31h
Character 2 0 0 8 0 4 0 1 2
Acceptability
SECURITY STANDBY NO SIGNAL
2.131. Query Time
Hexadecimal 02h 51h 47h 54h 03h
Character Q G T
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *h1 *h2 *m1 *m2 *s1 *s2 03h
Character
Parameters
*h1, *h2: Hour (2 digits)
*m1, *m2: Minute (2 digits)
*s1, *s2: Second (2 digits)
Set it by UTC (Coordinated Universal Time).
Example: 3 seconds at 3:45 p.m.
Hexadecimal 31h 35h 34h 35h 30h 33h
Acceptability
SECURITY STANDBY NO SIGNAL
Character
*y1 *y2 *y3 *y4 *m1
AV M UTE REMOTE
○ ○ ○ ○ ○
*h1 *h2 *m1 *m2
Character 1 5 4 5 0 3
AV M UTE REMOTE
○ ○ ○ ○ ○
*m2 *d1 *d2 *w
*s1 *s2
2.132. Query RUNTIME - LAMP
Hexadecimal 02h 51h 24h 4Ch 03h
Character Q $ L
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 *3 *5 *7 03h
Character *2 *4 *6 *8
Acceptability
SECURITY STANDBY NO SIGNAL
○ ○ ○ ○ ○
Parameters (*1, *2, *3, *4, *5, *6)
0 h 1 h
Hexadecimal 30h 30h 30h 30h 30h 30h 30h 31h
Character 0 0 0 0 0 0 0 1
9998 h 9999 h
Hexadecimal 39h 39h 39h 38h 39h 39h 39h 39h
Character 9 9 9 8 9 9 9 9
Note:
AV M UTE REMOTE
• If the lamp runtime cannot be accessed, 0000 is returned.
42/49
2.133. Query FILTER INFORMATION
Hexadecimal 02h 51h 46h 49h 3Ah *1 03h
Character Q F I : *2
Parameters (*1, *2)
Runtime Rewinding
Hexadecimal 30h 31h 32h 33h 34h 35h
Character 0 1 2 3 4 5
Response (Callback)
Example: When "QFI:5" is transmitted, and the remaining time is 1,500 h
Hexadecimal 02h 31h 35h 30h 30h 03h
Character 1 5 0 0
Acceptability
SECURITY STANDBY NO SIGNAL
○ × ○ ○ ○
Note:
• The remaining time returned by the response is a value of conversion, and it may differ from an actual value
depending on the environment and the condition.
2.134. Query CLOSED CAPTION SETTING
Hexadecimal 02h 51h 43h 43h 03h
Character Q C C
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 03h
Character *2
Acceptability
SECURITY STANDBY NO SIGNAL
○ × × ○ ○
Parameters (*1, *2)
OFF CC1 CC2 CC3 CC4
Hexadecimal 30h 31h 32h 33h 34h
Character 0 1 2 3 4
Note:
• Only when the model is PT-FW300NTU/FW300U/F300NTU/F300U, and the input signal is 480i or NTSC, this
command is available.
frequency
Filter kind Rewinding
AV M UTE REMOTE
AV M UTE REMOTE
interval
Elapsed time
after rewinding
Remaining
time
2.135. Query MAC Address
Hexadecimal 02h 51h 4Dh 41h 03h
Character Q M A
Response (Callback)
Example: AB0102030405
Hexadecimal 02h 41h 42h 30h
Character A B 0 1 0 2 0 3 0 4 0 5
Acceptability
SECURITY STANDBY NO SIGNAL
○ × ○ ○ ○
2.136. Query Temperature Information
Hexadecimal 02h 51h 4Dh 41h 3Ah *1 03h
Character Q T M : *2
Parameters (*1, *2)
Intake air Exhaust air
Hexadecimal 30h 31h
Character 0 1
Response (Callback)
Example: 20°C (68°F)
Hexadecimal 02h 30h 30h 32h
Character 0 0 2 0 / 0 0 6 8
Example: -10°C (14°F)
Hexadecimal 02h 2Dh 30h 31h
Character - 0 1 0 / 0 0 1 4
Acceptability
SECURITY STANDBY NO SIGNAL
○ ○ ○ ○ ○
31h 30h 32h 30h 33h 30h 34h 30h 35h 03h
AV M UTE REMOTE
30h 2Fh 30h 30h 36h 38h 03h
30h 2Fh 30h 30h 31h 34h 03h
AV M UTE REMOTE
43/49
2.137. Query Serial Number
Hexadecimal 02h 51h 53h 4Eh 03h
Character Q S N
Response (Callback)
Example: SB12345678
Hexadecimal 02h 41h 42h 31h
Character S B 1 2 3 4 5 6 7 8
Acceptability
SECURITY STANDBY NO SIGNAL
○ × ○ ○ ○
2.138. Query EDID Setting
Hexadecimal 02h 51h 45h 44h 03h
Character Q E D
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 03h
Character *2
Acceptability
SECURITY STANDBY NO SIGNAL
○ ○ ○ ○ ○
Parameters (*1, *2)
Moving image PC
Hexadecimal 31h 32h
Character 1 2
32h 33h 34h 35h 36h 37h 38h 03h
AV M UTE REMOTE
AV M UTE REMOTE
2.139. Query RGB/YPbPr
Hexadecimal 02h 51h 52h 46h 03h
Character Q R F
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 03h
Character *2
Acceptability
SECURITY STANDBY NO SIGNAL
○ × × ○ ○
Parameters (*1, *2)
RGB YPbPr AUTO
Hexadecimal 30h 31h 32h
Character 0 1 2
2.140. Query FUNCTION BUTTON
Hexadecimal 02h 51h 46h 43h 03h
Character Q F C
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 03h
Character *2
Acceptability
SECURITY STANDBY NO SIGNAL
○ ○ ○ ○ ○
Parameters (*1, *2)
DISABLE ASPECT PICTURE MODE
Hexadecimal 30h 31h 32h 33h 34h
Character 0 1 2 3 4
AV M UTE REMOTE
AV M UTE REMOTE
DAYLIGHT VIEW CLOSED CAPTION
44/49
2.141. Query SCREEN FORMAT
Hexadecimal 02h 51h 53h 46h 03h
Character Q S F
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 03h
Character *2
Acceptability
SECURITY STANDBY NO SIGNAL
○ × ○ ○ ○
Parameters (*1, *2)
16:10 16:9
Hexadecimal 30h 31h
Character 0 1
Note:
• This command is acceptable only for PT-FW300 series. In other models, ER401 is returned.
2.142. Query OVER SCAN
Hexadecimal 02h 51h 4Fh 56h 03h
Character Q O V
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 03h
Character *2
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
○ × × ○ ○
Parameters (*1, *2)
0％ 3％ 5％ 7％
Hexadecimal 30h 31h 32h 33h
Character 0 1 2 3
AV M UTE REMOTE
2.143. Query VGA60/480p setting
Hexadecimal 02h 51h 56h 35h 03h
Character Q V 5
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 03h
Character *2
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
○ × × ○ ○
Parameters (*1, *2)
VGA60 480p AUTO
Hexadecimal 30h 31h 32h
Character 0 1 2
2.144. Query DIGITAL CINEMA REALITY
Hexadecimal 02h 51h 50h 44h 03h
Character Q P D
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h *1 03h
Character *2
Acceptability
SECURITY STANDBY NO SIGNAL
○ × × ○ ○
Parameters (*1, *2)
OFF ON
Hexadecimal 30h 31h
Character 0 1
Note:
• This command is available only when an interlaced signal is inputted. In other cases, ER401 is returned.
AV M UTE REMOTE
45/49
2.145. Query IN STANDBY MODE
Hexadecimal 02h 51h 56h 58h 3Ah 41h 53h 42h 49h 30h
Character Q V X : A S B I 0
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 41h 53h 42h 49h 30h 3Dh 2Dh
Character A S B I 0 = +
Hexadecimal *1 *3 *5 *7 *9 03h
Character *2 *4 *6 *8 *10
Acceptability
SECURITY STANDBY NO SIGNAL
○ ○ ○ ○ ○
Parameters (*1, *2, *3, *4, *5, *6, *7, *8, *9, *10)
OFF
Hexadecimal 30h 30h 30h 30h 30h
Character 0 0 0 0 0
ON
Hexadecimal 30h 30h 30h 30h 31h
Character 0 0 0 0 1
2.146. Query DVI SIGNAL LEVEL
Hexadecimal 02h 51h 56h 58h 3Ah 44h 56h 49h 49h 30h
Character Q V X : D V I I 0
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 44h 56h 49h 49h 30h 3Dh 2Dh
Character D V I I 0 = +
Hexadecimal *1 *3 *5 *7 *9 03h
Character *2 *4 *6 *8 *10
Acceptability
SECURITY STANDBY NO SIGNAL
○ × × ○ ○
Parameters (*1, *2, *3, *4, *5, *6, *7, *8, *9, *10)
0-255:PC
Hexadecimal 30h 30h 30h 30h 30h
Character 0 0 0 0 0
16-235
Hexadecimal 30h 30h 30h 30h 31h
Character 0 0 0 0 1
AV M UTE REMOTE
AV M UTE REMOTE
2.147. Query WARNING MESSAGE
Hexadecimal 02h 51h 56h 58h 3Ah 57h 4Dh 44h 49h 30h
Character Q V X : W M D I 0
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 57h 4Dh 44h 49h 30h 3Dh 2Dh
Character W M D I 0 = +
Hexadecimal *1 *3 *5 *7 *9 03h
Character *2 *4 *6 *8 *10
Acceptability
SECURITY STANDBY NO SIGNAL
○ ○ ○ ○ ○
Parameters (*1, *2, *3, *4, *5, *6, *7, *8, *9, *10)
OFF
Hexadecimal 30h 30h 30h 30h 30h
Character 0 0 0 0 0
ON
Hexadecimal 30h 30h 30h 30h 31h
Character 0 0 0 0 1
AV M UTE REMOTE
46/49
2.148. Query SCREEN POSITION
Hexadecimal 02h 51h 56h 58h 3Ah 59h 53h 50h 49h 31h
Character Q V X : V S P I 1
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 59h 53h 50h 49h 31h 3Dh 2Dh
Character V S P I 1 = +
Hexadecimal *1 *3 *5 *7 *9 03h
Character *2 *4 *6 *8 *10
Acceptability
SECURITY STANDBY NO SIGNAL
○ ○ ○ ○ ○
Parameters (*1, *2, *3, *4, *5, *6, *7, *8, *9, *10)
LOW
Hexadecimal 30h 30h 30h 30h 30h
Character 0 0 0 0 0
CENTER
Hexadecimal 30h 30h 30h 30h 31h
Character 0 0 0 0 1
HIGH
Hexadecimal 30h 30h 30h 30h 32h
Character 0 0 0 0 2
Note:
• This command is acceptable only for PT-FW300 series. In other models, ER401 is returned.
AV M UTE REMOTE
2.149. Query RUNTIME - PROJECTOR
Hexadecimal 02h 51h 56h 58h 3Ah 52h 54h 4Dh 49h 30h
Character Q V X : R T M I 0
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 52h 54h 4Dh 49h 30h 3Dh 2Dh
Character R T M I 0 = +
Hexadecimal *1 *3 *5 *7 *9 03h
Character *2 *4 *6 *8 *10
Acceptability
SECURITY STANDBY NO SIGNAL AV M UTE REMOTE
○ ○ ○ ○ ○
Parameters (*1, *2, *3, *4, *5, *6, *7, *8, *9, *10)
Example: 55 hours
Hexadecimal 30h 30h 30h 35h 35h
Character 0 0 0 5 5
47/49
2.150. Query EMULATE
Hexadecimal 02h 51h 56h 58h 3Ah 45h 4Dh 55h 49h 30h
Character Q V X : E M U I 0
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 45h 4Dh 55h 49h 30h 3Dh 2Dh
Character E M U I 0 = +
Hexadecimal *1 *3 *5 *7 *9 03h
Character *2 *4 *6 *8 *10
Acceptability
SECURITY STANDBY NO SIGNAL
○ ○ ○ ○ ○
Parameters (*1, *2, *3, *4, *5, *6, *7, *8, *9, *10)
DEFAULT
Hexadecimal 30h 30h 30h 30h 31h
Character 0 0 0 0 1
D3500
Hexadecimal 30h 30h 30h 30h 32h
Character 0 0 0 0 2
D4000
Hexadecimal 30h 30h 30h 30h 33h
Character 0 0 0 0 3
D/W5K series
Hexadecimal 30h 30h 30h 30h 34h
Character 0 0 0 0 4
L730
Hexadecimal 30h 30h 30h 30h 35h
Character 0 0 0 0 5
L780
Hexadecimal 30h 30h 30h 30h 36h
Character 0 0 0 0 6
L735
Hexadecimal 30h 30h 30h 30h 37h
Character 0 0 0 0 7
L785
Hexadecimal 30h 30h 30h 30h 38h
Character 0 0 0 0 8
LB/W80
Hexadecimal 30h 30h 30h 30h 39h
Character 0 0 0 0 9
AV M UTE REMOTE
48/49
2.151. Query AUDIO SETTING
Hexadecimal 02h 51h 56h 58h 3Ah 41h 53h 42h 49h *1 30h
Character Q V X : A I N I *2 0
Parameters (*1, *2)
COMPUTER1
Hexadecimal 30h
Character 0
COMPUTER2
Hexadecimal 31h
Character 1
DVI
Hexadecimal 32h
Character 2
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 41h 53h 42h 49h *1 30h 3Dh 2Dh
Character A I N I *2 0 = +
Hexadecimal *1 *3 *5 *7 *9 03h
Character *2 *4 *6 *8 *10
Acceptability
SECURITY STANDBY NO SIGNAL
○ ○ ○ ○ ○
Parameters (*1, *2, *3, *4, *5, *6, *7, *8, *9, *10)
COM.AUDIO IN
Hexadecimal 30h 30h 30h 30h 30h
Character 0 0 0 0 0
AUDIO IN
Hexadecimal 30h 30h 30h 30h 31h
Character 0 0 0 0 1
AV M UTE REMOTE
2.152. Query Lamp Part No.
Hexadecimal 02h 51h 56h 58h 3Ah 4Ch 4Dh 4Eh 53h 30h 03h
Character Q V X : L M N S 0
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 4Ch 4Dh 4Eh 53h 30h 3Dh
Character L M N S 0 =
Hexadecimal *1 *3 *5 *7 *9 03h
Character *2 *4 *6 *8 *10
Acceptability
SECURITY STANDBY NO SIGNAL
× ○ ○ ○ ○
Parameters (*1, *2, *3, *4, *5, *6, *7, *8, *9, *10)
Example: ET-LAF100
Hexadecimal 45h 54h 2Dh 4Ch 41h 46h 31h 30h 30h
Character E T - L A F 1 0 0
2.153. Query ACF Part No.
Hexadecimal 02h 51h 56h 58h 3Ah 46h 4Dh 4Eh 53h 30h 03h
Character Q V X : F M N S 0
Response (Callback)
In the period when the command can be accepted
Hexadecimal 02h 46h 4Dh 4Eh 53h 30h 3Dh
Character F M N S 0 =
Hexadecimal *1 *3 *5 *7 *9 03h
Character *2 *4 *6 *8 *10
Acceptability
SECURITY STANDBY NO SIGNAL
× ○ ○ ○ ○
Parameters (*1, *2, *3, *4, *5, *6, *7, *8, *9, *10)
Example: ET-ACF100
Hexadecimal 45h 54h 2Dh
Character E T - A C F 1 0 0
AV M UTE REMOTE
AV M UTE REMOTE
41h 43h 46h 31h 30h 30h
49/49
Loading...