Panasonic RQTX1165-1P, SC-HTB10 User Manual
Operating Instructions
Home Theater Audio System
Model No. SC-HTB10
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely.
Please keep this manual for future reference.
The illustrations shown may differ from your unit.
Included Installation Instructions
The installation should never be done by any other than a qualified installation specialist.
Before commencing work, carefully read these installation instructions and the operating instructions
to ensure that installation is performed correctly.
(Please keep these instructions. You may need them when maintaining or moving this unit.)
If you have any questions contact
For U.S.A. and Puerto Rico: 1-800-211-PANA(7262)
For Canada: 1-800-561-5505
For U.S.A. and Puerto Rico: The warranty can be found on page 18.
For Canada: The warranty can be found on page 20.
As an ENERGY STAR Partner,
Panasonic has determined that
this product meets the ENERGY STAR
guidelines for energy efficiency.
For Canada only: The word “Participant” is used in place of the word
“Partner”.
®
®
P PC
RQTX1165-1P
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE,
≥ DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE
APPARATUS.
≥ USE ONLY THE RECOMMENDED ACCESSORIES.
≥ DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER
CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC
SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
Button-type battery (Lithium battery)
≥ Insert with poles aligned.
≥ Do not touch the terminals (i and j) with metal objects.
≥ Do not recharge, disassemble, remodel, heat or throw into fire.
≥ Keep out of reach of children
If any electrolyte should come into contact with your hands or clothes, wash it off thoroughly with water.
If any electrolyte should come into contact with your eyes, never rub the eyes. Rinse eyes thoroughly
with water, and then consult a doctor.
Warning
Risk of fire, explosion and burns. Do not disassemble, heat above 60 oC (140 oF) or incinerate.
The unit should be installed near an accessible AC power outlet, with the power cord connected directly
to it.
To completely disconnect power from the unit, unplug the power cord from the AC power outlet.
<For USA-California only>
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material s special
handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC
2
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
.
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit
and the applicable safety instructions listed below. Keep these operating instructions handy for future
reference.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer’s
instructions.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9 Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other.
A grounding-type plug has two blades and a
third grounding prong. The wide blade or the
third prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11 Only use attachments/accessories specified by
the manufacturer.
12 Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving
the cart/apparatus combination to avoid injury
from tip-over.
13 Unplug this apparatus during lightning storms
or when unused for long periods of time.
14 Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
The model number and serial number of this
product can be found on either the back or the
bottom of the unit.
Please note them in the space provided below
and keep for future reference.
MODEL NUMBER ______________________
SERIAL NUMBER ______________________
User memo:
DATE OF PURCHASE ___________________
DEALER NAME ________________________
DEALER ADDRESS ____________________
______________________________________
TELEPHONE NUMBER __________________
SC-HTB10
Licenses
Manufactured under license from Dolby Laboratories. Dolby,
Pro Logic, and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license under U.S. Patent #’s:
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 &
other U.S. and worldwide patents issued & pending.
DTS and the Symbol are registered trademarks & DTS
Digital Surround and the DTS logos are trademarks of DTS,
Inc. Product includes software.
© DTS, Inc. All Rights Reserved.
HDMI, the HDMI Logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
HDAVI Control™ is a trademark of Panasonic Corporation.
VIERA Link™ is a trademark of Panasonic Corporation.
EZ Sync™ is a trademark of Panasonic Corporation.
Operating Instructions
3
Table of Contents
Operating Instructions
IMPORTANT SAFETY INSTRUCTIONS ............................................................... 3
Licenses ..................................... .................................................... ....................... 3
Accessories .......................................................................................................... 5
Unit care ................................................................................................................ 5
Control reference guide ....................................................................................... 6
Main unit (Front) .........................................................................................................................6
Main unit (Rear) .........................................................................................................................6
Remote control ...........................................................................................................................7
Placement ............................................................................................................. 8
Assembling the unit ............................................................................................. 9
Connections ....................................................................................................... 10
Connection to a TV ..................................................................................................................10
Connection from an HDMI compatible device ..........................................................................11
AC power supply cord connection ...........................................................................................11
Using this unit .................................................................................................... 12
Audio effects ...................................................................................................... 13
The various audio effects .........................................................................................................13
Changing the audio effects ......................................................................................................13
Linked operations with the TV
TM
(VIERA Link
Specifications ..................................................................................................... 15
Audio information .............................................................................................. 15
Troubleshooting ................................................................................................. 16
Remote control code ................................................................................................................17
Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO) ...................................................... 18
Product Service ...................... ... .... ... ... ....................................... ... ... .... ... ........... 19
Limited Warranty (ONLY FOR CANADA) ......................................................... 20
“HDAVI ControlTM”) ................................................................... 14
Installation Instructions
Safety Precautions ............................................................................................. 21
Components ....................................................................................................... 23
Installation procedure ........................................................................................ 23
Attaching the wall mount brackets ...........................................................................................23
Connections .............................................................................................................................24
Placement ................................................................................................................................24
Attaching this unit to a wall ......................................................................................................25
4
≥ Operations in these instructions are described mainly with the remote control, but you can
perform the operations on the main unit if the controls are the same.
≥ Some accessories and external devices mentioned in these operating instructions that are not
supplied with this product may not be for sale in certain regions.
Accessories
Check the supplied accessories before using this unit.
∏ 1 Remote control
(Built-in battery)
(N2QAYC000027)
∏ 1 AC power supply cord
(RFAX1027)
∏ 2 Wall mount brackets
(RYQX1034-K)
∏ 2 Screws
(RYQX1042-1)
(ONLY FOR CANADA)
The enclosed Canadian French label sheet corresponds to the English display on the remote control and
the front and rear of the unit.
∏ 2 Lock pins
(RYQX1048)
≥ Product numbers correct as of April 2010. These may be subject to change.
≥ Only for U.S.A. and Puerto Rico:
To order accessories, refer to “Accessory Purchases (United States and Puerto Rico)” on page 19.
For Canada: To order accessories, call the dealer from whom you made your purchase.
Unit care
∫ Clean this unit with a soft, dry cloth
≥Never use alcohol, paint thinner or benzine to clean this unit.
≥Before using chemically treated cloth, carefully read the instructions that came with the cloth.
∫ To dispose or transfer this unit
If you discard this unit either by disposal or transfer, then follow the procedure to return all the settings to
the factory presets to delete the user settings. (> 16, “To return to the factory preset.”)
Operating Instructions
5
Control reference guide
Main unit (Front)
123 54
1 Standby/on switch (POWER Í/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
2 Adjust the Volume of this unit
3 Select the source
“TV” !# “BD/DVD”
4 LED status indicators (> 12, 13)
A Audio source indicator
B Clear-mode Dialog indicator
Main unit (Rear)
AC IN
1
C Sound Effect indicator
D Dolby Virtual Speaker indicator
E Audio format indicator
5 Remote control signal sensor
Remote control operation range
Distance:
Within approx. 7 m (23 ft.)
Angle:
Approx. 10
right
o
up and 30odown, 30oleft and
2
3
4
5
1 AC IN terminal (> 11)
2 Ir SYSTEM terminal
(Only for use with the optional IR Blaster. (> 8))
3 HDMI AV OUT terminal (> 10)
6
4 OPTICAL DIGITAL AUDIO IN terminal (> 10)
5 HDMI AV IN terminal (> 11)
Remote control
Remove the insulation sheet A before using.
1
2
3
1 Turn this unit on or off (> 12)
2 Select the source (> 12)
[TV]:
Select the TV as the source
[BD/DVD]:
Select the device connected to the HDMI AV
IN terminal as the source
3 Turn Clear-mode Dialog on or off (> 13)
4 Adjust the Subwoofer level of this unit
5 Adjust the Volume of this unit
6 Mute the sound
7 Turn Dolby Virtual Speaker on or off (> 13)
8 Turn Sound Effect on or off (> 13)
CAUTION
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type recommended by the
manufacturer. Dispose of used batteries
according to the manufacturer’s instructions.
4
5
∫ To replace a button-type battery
6
7
8
1 While pressing the stopper B, pull out the
battery holder.
2 Set the button-type battery with its (i) mark
facing upward and then put the battery holder
back in place.
≥ When the button-type battery runs down,
replace it with a new battery (part number:
CR2025). The battery should normally last
about 1 year, however this depends on how
frequently the unit is used.
≥ Keep the button-type battery out of reach of
children to prevent swallowing.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in an automobile
exposed to direct sunlight for a long period of
time with doors and windows closed.
Replace battery with Panasonic part No.
CR2025 only. Use of another battery may
present a risk of fire or explosion.
Caution: Battery may explode if mistreated.
Dispose of used battery promptly. Keep away
from children.
Do not recharge, disassemble or dispose of in
fire.
Operating Instructions
7
Placement
Caution
≥ This unit and the supplied wall mount brackets are to be used only as indicated in
these operating instructions or the installation instructions. Failure to do so may lead
to damage to the amplifier and/or the speakers, and may result in the risk of fire.
Consult a qualified service person if damage has occurred or if you experience a
sudden change in performance.
≥ Do not attempt to attach this unit to a wall using methods other than those described
in this manual.
How you place this unit can affect the bass and the sound field.
Place this unit near the TV.
This unit should be placed parallel to the seating position.
E.g.,
On the wall
In a rack
§
1, 2, 3
On a table
§
1, 2, 3, 4, 5
To attach this unit to the wall, refer to the installation instructions. (> 21)
Installation work should never be done by any other than a qualified installation specialist.
§1 Place this unit on a flat secure base. (Do not place this unit on the TV’s pedestal.)
§2 To allow for proper ventilation and to allow for proper air flow around this unit, position it with at least 5 mm (
sides of this unit.
§3 Secure the unit to prevent it from falling. (> 9)
§4 Do not place this unit in front of a 3D compatible TV. This unit may block the transmitter for the 3D eyewear.
§5 Do not place this unit too close to the TV. This unit may interfere with the TV’s various sensors (ambient light, etc.).
≥ You can damage the speakers and shorten their useful life if you play sound at high levels over extended periods.
≥ Placing this unit too close to the floor, walls, and corners can result in excessive bass. Cover walls and windows with thick
curtains.
∫ If the TV’s remote control sensor is
blocked by this unit.
Try using the TV’s remote control from a different
angle. If the problem persists, you can use the
optional Panasonic IR Blaster (SH-WR10) to relay
the signal to the TV.
≥ The optional Panasonic IR Blaster (SH-WR10) is
only compatible with Panasonic TVs.
Purchase SH-WR10 (Accessory IR Blaster) at
selected dealers or online by visiting our Web Site
at: http://www.panasonic.com
8
or in Canada: http://www.panasonic.ca
For details, please refer to the operating
instructions for the optional Panasonic IR Blaster.
≥ Do not use the IR Blaster if the TV's remote
control sensor is not blocked by this unit.
∫ If irregular coloring occurs on your TV,
turn the TV off for about 30 minutes.
If it persists, move this unit further away from the
TV.
3
/16q) of space on all
Assembling the unit
Refer to the following when placing this unit on a table or in a rack. For wall mount, refer to the
installation instructions. (> 21)
Professional installation is required.
The installation should never be done by any other than a qualified installation specialist.
Preparation
≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
≥Keep the screws out of reach of children to prevent swallowing.
≥ Do not hold this unit in one hand to avoid injury by dropping this unit when carrying.
To prevent the unit from falling
1 On the rear of the unit:
Place the wall mount bracket by aligning the holes in the wall mount bracke t
with the projecting parts A.
2 Screw the wall mount bracket firmly into place.
≥ Screw tightening torque: 80 N0cm (17.98 lbf-ft) to 120 N0cm (26.98 lbf-ft).
≥ Repeat the steps above when installing the second wall mount bracket.
3 Thread a cord (not supplied) through each wall mount bracket.
≥ Make sure to use a cord which is capable of
supporting over 20 kg (44.1 lbs).
A Rear of this unit
B Fall prevention
cord (not supplied)
4 After all the necessary connections are finished (> 10)
Place the unit in the desired position and attach each cord onto the rack or
table.
≥ Attach each cord to a different screw eye.
≥ Make sure that there is no more than a 3 cm (1
slack.
A This unit
B Fall prevention cord (not supplied)
C Rack or table
D Screw eye (not supplied)
≥ Attach at a position capable of supporting over 20 kg
(44.1 lbs).
3
/16q)
e.g.
Operating Instructions
9
Loading...