Panasonic PV-M1338 User Manual
Thank you for choosing
Panasonic
Omnivlsican
vm
^ 1
Q)
MODEL PV-M1338
As nn Energy Згак*" Рнппсг. M;ustishit» F.lecirii;
Corjx)raiion of Лл\спса has dcicmiincd that this
pmduct or pniduct iiuxlel meets the E\tiu>v Star*
guidelines lor energy erilcienty.
Operating
Instructions
Please read these instructions carefully before attempting to connect,
operate or adjust this product. Please save this manual.
Spar>i$h Quick Use Guide is included.
Guia para rápida consulta en español está induido.
Things You Should Know
Congratulations
on your purchase of one of the most sophisticated and reliable products
on the market today. Used properly, it will bring you and your family
years of enjoyment. Please fill in the information at right. The serial
number is on the tag located on the back of your Combination VCR.
Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.
Serial No.
_______
_______
______
______
PV-M1338
Safety Precautions
Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
This video recorder, equipped with the HQ ( High Quality) System, is compatible with existing VHS equipment.
Only use those tapes with the IHH mark. It is recommended that only cassette tapes that have been tested and
inspected for use in 2, 4, 6, and 8 hour VCR machines be used.
This television receiver provides display of television closed captioning in accordance with §15.119 of the FCC rules.
This symbol warns the user that uninsulated voltage within the unit
A
CAUTION TO REDUCE THE RISK OP ELECTRIC SHOCK.
□0 NOT REMOVE COVEH ion BACK)
NO USEA-(£RVICCA0LE parts mSiDE
REFER SERVlClNO TO QUALIFIED SERVICE FERSOMCL
A
may have sufficient magnitude to cause electric shock. Therefore, it is
dangerous to make any kind of contact with any inside part of this unit.
This symbol alerts the user that important literature concerning the
operation and maintenance of this unit has been included.
Therefore, it should be read carefully in order to avoid any problems.
Table of Contents
Things You Should Know.................................................................................................................................2
Important Safeguards and Precautions...........................................................................................................3
Unpacking Your Combination VCR • Product Features...................................................................................4
Antenna or Cable Connections (Outdoor Antenna, Cable Box, Scrambled/Unscrambled Channels)
Location of Controls (Remote Control, Combination VCR)...........................................................................................6, 7
One Time Setup (On-Screen Language, Channel Memory, Auto Clock Set)................................................................8, 9
On-Screen Displays (OSD) (Function, Channel, Menu, VCR Status/Clock, Warning, Instruction)................................10
TV Operation (Main Operation, Using the 100 key. Rapid Tune, Audio Mute, Phones, SELF-DEMO Mode, NITE/GAME mode)
Picture Adjustment (Color, Tint, Brightness, Picture, Sharpness, Reset).........................................................
TV Timer Features (Alarm Timer, Sleep Timer)................................................................................................................13
Closed Caption System (Main operation. Caption On Mute)...........................................................................................14
Playback a Tape (Main operation, special Effects, Quality Picture Features)..................................................................15
Record On a Tape (Main operation, One Touch Record, Input Select)...........................................................................16
Copying Your Tapes (Dubbing) (Connection, Main operation)......................................................................................17
Timer Recording (Main Operation, Cancel, Clear or Replace Program Contents)
Special VCR Features (Channel Caption, Time Stamp, Blue Back ON/OFF Feature, VCR Lock, Warning Beeper)
Tape Operation (index Search, Repeat Play, One Minute Skip, Zero Search, Auto Functions)
Unit and Cassette Information.......................................................................................................................25
Before Requesting Service (Self-check items)...............................................................................................................26
Service Center List.........................................................................................................!...............................27
Spanish Quick Use Guide/Guia para rápida consulta.............................................................................28-31
Warranty.........................................................................................................................................Back Cover
...................................................
............................
.......................
...............
18, 19
..........
22, 23, 24
5
12
20, 21
.......
11
2
Important Safeguards and Precautions
FOR YOUR SAFETY, READ AND RETAIN ALL
SAFETY AND OPERATING INSTRUCTIONS.
HEED ALL WARNINGS IN THE MANUAL AND
ON THE UNIT
INSTALLATION
1 POWER SOURCE CAUTION
Operate only from a power source indicated on the
unit or in this manual.
If necessary, have your Electric Utility Service
Company or Video Products Dealer verify the power
source in your home.
2 POLARIZED OR GROUNDING PLUG
As a safety feature, this Video product comes with
either a polarized power cord plug (one blade is
wider than the other), or a three-wire grounding type
plug.
POLARIZED PLUG CAUTION:
This plug will only fit into an outlet one way. If you
cannot fully insert the plug, try reversing it. If it still will
not fit, have an electrician Install the proper wall outlet.
Do not defeat the safety feature by tampering with the
plug.
GROUNDING PLUG CAUTION:
This plug will only fit into a three-hole grounding outlet.
If necessary, have an electrician install the proper
outlet. Do not defeat the safety feature by tampering
with the plug.
3 POWER CORD
Make sure power cords are routed so that they are
not likely to have anything rest on them, roll over
them, or be In the way of walking traffic.
If an extension cord is used, make sure it also has
either a polarized or grounded plug and that the
cords can be securely connected.
Frayed cords, damaged plugs, and damaged or
cracked wire insulation are hazardous and should be
replaced by a qualified service technician.
Overloaded outlets and extension cords are fire
hazards and should be avoided.
4 DO NOT BLOCK VENTILATION HOLES
Ventilation openings in the cabinet release heat
generated during operation. If they are blocked, heat
build-up inside the unit can cause failures that may
result in a fire hazard or heat damage to cassettes.
For protection follow these rules:
a. Never cover ventilation slots or the unit while in
use, or operate the unit when placed on a bed,
sofa, rug, or other soft surface.
b. Avoid built-in installation, such as a book case or
rack, unless proper ventilation is provided.
5 AVOID EXTREMELY HOT LOCATIONS OR
SUDDEN TEMPERATURE CHANGES
Do not place the unit over or near any kind of heater
or regulator, in direct sunlight, inside a dosed
vehicle, etc.. Do not move the unit suddenly between
areas of extreme temperature variation. If the unit is
suddenly moved from a cold place to a warm place,
moisture may condense In the unit and on the tape.
6 TO AVOID PERSONAL INJURY
* Do not place unsecured equipment on a sloping
surface.
* Do not place this unit on any support that Is not
firm, level and adequately strong. The unit could fall
causing serious injury to child or
adult and damage to the unit,
* An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and
uneven surfaces may cause the
appliance and cart combination to
overturn.
* Carefully follow all operating
instructions and use the manufacturer's
recommended accessories when operating this unit
or connecting it to any other equipment.
OUTDOOR ANTENNA INSTALLATION
SAFE ANTENNA AND CABLE CONNECTION
If an outside antenna or cable
system is connected to the
equipment, be sure the
antenna or cable system Is
grounded so as to provide
some protection against
built up static charges and
voltage surges. Section 810
of the National Electrical
Code. ANSI/NFPA 70 (in
Canada, part 1 of the
Canadian Electrical Code)
provides information with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna discharge unit,
connection to grounding electrodes and requirements for the grounding
electrode.
NEC ' NATIONAL CLECTTQCAL COM
ANTENNA
MSCHAROEUWT
(NEC SECTION 41O-S0)
QRÛUNO CLAMPS
POWER SERVICE GftOUNDMO
ELECTROM SYSTEM
(NEC ART aStt. PAAT N}
KEEP ANTENNA CLEAR OF HIGH VOLTAGE POWER LINES
OR CIRCUITS
An outside antenna system should be located well away from power lines,
electric light or power circuits and where it will never come into contact with
these power sources if it should happen to fall. When installing an outside
antenna, extreme care should be taken to avoid touching power lines,
circuits or other power sources as this could be fatal. Because of the
hazards involved, antenna Installation should be left to a professional.
USING THE VIDEO UNIT
If the unit has been in storage or moved to a new location, refer first to the
INSTALLATION section of these safeguards.
1 KEEP THIS VIDEO UNIT AWAY FROM WATER OR MOISTURE
OF ANY KIND.
2 IF EQUIPMENT IS EXPOSED TO RAIN, MOISTURE, OR
STRONG IMPACT, unplug the unit and have it inspected by a qualified
service technician before use.
3 DURING AN ELECTRICAL STORM
During a lightning storm, whether indoors or outdoors, or before leaving the
unit unused for extended periods of time, disconnect all equipment from the
power source as well as the antenna and cable system.
4 WHEN THE UNIT IS PLUGGED IN
• Never expose the unit to rain or water, DO NOT OPERATE if liquid has
been spilled into the unit. Immediately unplug the unit, and have it
inspected by a service technician. Fire and shock hazards can result from
electrical shorts caused by liquid contact inside.
• Never drop or press any object through openings in the unit. Some internal
parts carry hazardous voltages and contact can cause electric shock or fire
hazard.
• Avoid placing the unit directly above or below your TV set as this may
cause electrical Interference. Keep all magnets away from electronic
equipment.
5 USING ACCESSORIES
Use only accessories recommended by the manufacturer to avoid risk of fire,
shock, or other hazards.
6 CLEANING THE UNIT
Unplug the unit. Then, use a clean, dry, chemically untreated cloth to gently
remove dust or debris. DO NOT USE cleaning fluids, aerosols, or forced air
that could over-spray, or seep into the unit and cause electrical shock. Any
substance such as wax, adhesive tape, etc. may mar the cabinet surface.
Exposure to greasy, humid, or dusty areas may adversely affect Internal parts.
SERVICE
DO NOT SERVICE THIS PRODUCT YOURSELF
If, after carefully following the detailed operating instructions, this Video
product does not operate properly, do not attempt to open or remove covers,
or make any adjustments not described in the manual. Unplug the unit and
contact a qualified service technician.
IF REPLACEMENT PARTS ARE REQUIRED
Make sure the service technician uses only parts specified by the manufacturer,
or those having the same safety characteristics as the original parts. The use of
unauthorized substitutes may result In fire, electric shock, or other hazards.
HAVE THE SERVICE TECHNICIAN PERFORM A SAFETY CHECK
After any service or repairs to the unit, request the sen/ice technician to
conduct a thorough safety check as described in the manufacture’s service
literature to insure that the video unit is in safe operating condition.
Unpacki ng Y our Com bina tion VCR • Pr odu ct Fe atu res
Unpacking Your
Combination VCR
The accessories shown below are provided to
help you use or set up your Combination VCR.
Accessories
Remote Control
VSQS1573
O © ©I
o © ©I
o © ©
©0
STSSo
KP ^ matt
□u m @
T fcflP ■WBB
S
^Ej ^3
___
2 “AA” Batteries
___
)
)
Load the batteries
Press in and up on
the latch with your
thumb nail and lift
off the lid.
Install two batteries
as indicated inside
the Battery
Compartment.
Fit the lid’s hinge
piece into the indent
on the case, and
snap the lid into
place.
Battery replacement
caution
• Do not mix old and new batteries.
• Do not mix alkaline with manganese batteries.
To order accessories,
call toll free 1-800-211-PANA(7262).
Product Features
Alarm Timer......................................................................................................................................................13
All Channel Auto Set/181-CH TV/CABLE Tuner ...............................................................................................8
Auto Clock Set................................................................................................................................................8, 9
Auto Daylight Saving Time ..............................................................................................................................25
Auto Operation Functions (Auto Shut Off, Auto Playback, Rewind, Tape Eject, Power Off)
Auto Repeat Function.......................................................................................................................................24
Closed Caption System.................................................................................................................................. 14
Easy-to-Read English/Spanish/French On-Screen Displays............................................................8, 9,18, 19
Front-mounted AA/ In Terminals .....................................................................................................................17
Head Cleaner ..................................................................................................................................................25
NITE/GAME Mode..........................................................................................................................................11
One Minute Skip...............................................................................................................................................24
One Month, 8 Program Auto Timer Recording..........................................................................................18,19
One Touch Recording (OTR) ..........................................................................................................................16
Quick Play Mechanism ....................................................................................................................................26
Rapid Tune......................................................................................................................................................11
Special Effects Playback .................................................................................................................................15
Special VCR Features (Channel Caption, Time stamp, Blue Back ON/OFF Feature, VCR Lock, Warning Beeper)
VHS Index Search System (Direct Access Index Search, Program Index Search, Index Scan Search)..22, 23
Zero Search......................................................................................................................................................24
_____________________________________
...........................
24
........
20, 21
4
Antenna or Cable Connections
Outdoor Antenna Connection
Unhook the antenna from your previous TV
or VCR and connect it to the back of the
Combination VCR as shown in the diagram.
If your antenna system has separate UHF
and VHF lead-ins, you need a UHFA/HF
Band Mixer {not supplied).
Cable Connections
(A) Without a Converter/Descrambler Box
With this connection, you can use your
Combination VCR remote control to select
channels for viewing and select
unscrambled channels for timer recording.
Scrambled channels may not be viewed or
recorded with this connection.
(B) With a Converter/Descrambler Box
With this connection, you may record and
view any channel including scrambled
channels. Please note, however that
channel selection must be made at the
cable company converter box. Timer
recording is limited to one channel at a time,
and you can only view the channel you are
recording.
from
Antenna
(A)
(B)
{Flat)Twin Lead
300 Ohm Cable
(Round) 75 Ohm
coaxial Cable
300-75 ohm
Transformer
(not supplied)
__
(Flat)Twin Lead
300 Ohm Cable
UHF/VHF Band
Mixer (not supplied)
_
Back of
Combination VCR
Back of Combination VCR
Cable TV
To Watch and Record Scrambled/
Unscrambled Channels
Set the Combination VCR to the output
channel of the cable converter box (e.g. CH3).
Now, select channels to be viewed or
recorded at the cable converter box.
FCC WARNING: Any unauthorized changes or
modifications to this equipment would void the
user’s authority to operate.
Note to CABLE System Installer
This reminder is provided to call the CABLE
System Installers attention to Article 820-40 of the
NEC that provides guidelines for proper grounding
and, in particular, specifies that the cable ground
shall be connected to the grounding system of the
building, as close to the point of cable entry as
practical.
Location of Controls
Remote Control Buttons
POWER
-------------------
See pages 6,11.
- NITE/GAME
See page 11.
MUTE
See pages 11,14.
CHANNEL UP/DOWN
SELECT UP/DOWN
See pages 8~14, 16,18-24.
ACTION
-----------------------------------------
See pages 8-10,12,14,16,
NUMBERED KEY-----------------See pages 9,11, 16, 22.
DISPLAY
See pages 10,13, 24,
INDEX
-----------------------
See pages 22, 23.
PLAY
See pages 15, 23.
REWIND/SEARCH —
See pages 15, 22, 23.
PAUSE
See pages 15, 16.
ADD/DELETE
See pages 8, 9, 13,19, 20.
----------------------------
STOP
See pages 15,16,19, 23.
20, 21,24.
---------------------
---------------------------------------
RAPID TUNE
See page 11.
-------------VOLUME UP/DOWN
SET/BACKSPACE
See pages 8-14, 16, 18-24.
PROGRAM
See pages 18,19.
TRACKING UP/DOWN
See page 15.
----------- SLEEP
See page 13.
— ON-TIMER
See page 13.
FAST FORWARD/SEARCH
See pages 15, 22, 23.
RECORD/TIME
See page 16.
-----------SPEED
See page 16.
ZERO/1 MINUTE SKIP
See page 24.
SLOW
See page 15.
-----------COUNTER RESET
See page 24.
Rear View of the Combination VCR
Front View of the Combination VCR
15,16,19,23. Seepages Seepages Seepages
Indicators on the Front Panel
ON TIMER Indicator
Lights when the On
Timer is set.
See page 13.
REPEAT Indicator
Lights when “REPEAT
PLAY: ON" is selected
and playback is in
progress.
See page 24.
15,22,23. 11,15,23,24. 15,22,23.
RECORD Indicator
Lights during recording. In
Rec Pause or OTR Pause
mode, the indicator flashes.
See page 16.
See pages
16,21.
PROGRAM TIMER Indicator
Lights when the Combination
VCR is set for Timer
Recording. It flashes when a
Timer Recording has been set
with no tape inserted, the
clock is not set, or the tape is
in motion.
See pages 16,18, 19.
One Time Setup
When the Combination VCR is turned on for
the first time, it automaticaliy enters the
setup mode. Setup includes the following:
• Choose the language for on-screen menus
and messages.
• Tell the Combination VCR how your
equipment is hooked up (page 5) so the
Combination VCR can correctly place
channels into memory.
• Get the Combination VCR ready for clock set.
Check list before you begin.
Q Your Combination VCR is connected to an
Antenna, or Cable system (see page 5).
1 2 2-3-4
To Set Language, Channels and Clock
1 Press POWER to turn the Combination VCR on.
& Press CHAV, or VOL ► for on
screen displays in English,
Spanish or French.
• If you choose the wrong language,
please see the “Reset all Combination
VCR Memory Functions" section on
page 25.
• If you use a cable box. the cable box must be left on for auto
channel set.
Important: If you use a cable box, turn it on and seiect the PBS station in your time zone.
3 Press CH A to start Channel
Auto Set and Clock Auto Set.
These on-screen displays will appear in sequence.
• CH AUTO SET PROCEEDING
• CH AUTO SET COMPLETED
• AUTO CLOCK SET PROCEEDING
or
--------------
^Case 1^
7/28/1998 TUE 12:00PH
AUTO CLOCK SET
END : PUSH CH UP KEY
DST: ON
SETTING : CH 10
COMPLETED
(case 2^
SELECT LANGUAGE
PUSH CH A lEngllsh
OPRIMIR CH T :Espaflol
APP. VOL + :Franiais
CHANNEL/CLXK AUTO SET
CONNECT ANTENNA CABLE
AND IF YOU USE A CABLE
BOX, TUNE IT TO YOUR
LOCAL PBS CH THEN. , .
PLEASE PUSH CH UP KEY
AUTO CLOCK SET
IS INCOMPLETE
PUSH ACTION TO SET CLOCK
Using the keys
Whenever a menu or program
screen is displayed, CHANNEL
UP/DOWN and VOLUME UP/DOWN on
the remote control function as
only. For VOLUME UP/DOWN functions,
use the buttons on the Combination VCR.
4 (case 1^ If the displayed time is correct, press CH A to
exit.
• This concludes one time Combination VCR setup.
• See important note at the bottom of this page.
If the displayed time and DST. are not correct...
If you happen to live close to two time zones, the Combination VCR may
have recognized the PBS channel (setting channel) in the wrong time
zone. Please do the following to correct the situation.
a. Make a note of the SETTING: CH number shown on-screen and
press CH A to exit.
b. Delete the setting channel from the Combination VCR channel memory.
(See the Add or Delete a Channel section on the next page.)
C. Press ACTION to display the MAIN MENU.
d. Press AT^^ to select “CLOCK," and then press ACTION to display
the SET CLOCK screen.
• If you use a cable box and have multiple PBS stations, tune the
cable box to a different PBS station and try auto clock set again
using the menu.
e. Press AT to select “AUTO CLOCK SET,” and then press ► to set
and CH A to start Auto Clock set.
IMPORTANT NOTE FOR AUTO CLOCK SET WHEN USING THE CABLE BOX
• Auto clock set will be performed when the Combination VCR is turned
off the first time each day. If you use a cable box and you want auto
clock set to be performed, the cable box must be left on and tuned to
the PBS channel at the time the Combination VCR power is turned off.
• If you use Audio/Video Jack connection between the Combination
VCR and Cable Box, you must also connect the RF coaxial cable in
order to use the auto clock set and channel auto set features.
• If for any reason the time is changed manually, automatic time
correction will not occur.
8
(cl^ If AUTO CLOCK SET IS INCOMPLETE
^^ appears, please set the clock manually.
set clock
a. Press ACTION to display the SET
CLOCK screen.
b. Press AT to select and ► to
enter the month, date, year, time
and DST. (Daylight Saving Time).
To Make Corrections,
repeatedly press to move the
cursor to the incorrect entry and
make the correction.
c. Press ACTION twice to start the
clock and exit the MAIN MENU.
/\)
..............
SELECT:* * KEY
SET :► KEY
END ;ACTION KEY
“DST :ON" automatically
adjusts for daylight saving
time. (See page 25.)
......................
To Change the OSD Language
1 Press ACTION to display the MAIN MENU.
2 Press AT to select the language selection
icon.
3 Press ACTION repeatedly to change the language
as shown.
4 Press AT to select “EXIT,” and then press
ACTION to exit the MAIN MENU.
To Replace Channels in Memory
In case, you have cable installed, etc.
1 Press ACTION to display the MAIN MENU.
2 Press AT4^ to select “CH,”
and then press ACTION to
display the SET UP CHANNEL
screen.
3 Press AT repeatedly to select
“ANTENNA,” and then press
► to select your antenna
system (“TV” or “CABLE”).
4 Press AT to select “AUTO
SET,” and then press
► to start.
• To exit the SET UP CHANNEL
screen, press ACTION twice.
SELECT ; * Y 4 ► KEY
SET lACTION KEY
------
SET UP CHANNEL
AUTO SET
CHANNEL CAPTION
SELECT:* ▼ KEY
SET ;► KEY
END :ACT I ON KEY
---------
SELECT/
SET
keys
NUMBERED
keys
To Set or Reset the Clock
In case the clock is wrong, or a power failure occurred.
1 Press ACTION to
display the MAIN
MENU.
Press AT ◄►to
select “CLOCK.”
Then, press
...........
SET CLOCK
AUTO CLOCK SET
PHJItHI
SELECT:* ▼ KEY
SET ;► KEY
END lACTION KEY
.................
ACTION to display
the SET CLOCK
screen.
Press AT to select
“MANUAL,” and then
► to display the
SET CLOCK screen.
SET CLOCK
ÉÉbsBÉnàznà'
SELECT:* T KEY
SET :► KEY
END : ACT I ON KEY
Please do steps b
and c at the top of this page.
To Add or Delete a Channel
Select a channel channel oe added
1
using the
NUMBERED keys
to add or CHAT
to delete.
Press ADD/DLT
to add or delete
the channel.
• To select a channel once it’s deleted, use the
NUMBERED keys.
NOTES
This Combination VCR will accurately maintain its calendar up to Dec. 31,2089,11:59PM.
Normal TV or Cable channels are automatically selected and placed in memory depending on how
your Combination VCR is hooked up.
On-Screen Displays (OSD)
Channel & Function Display
Whenever the channel is
changed, the channel
number will appear for a few
seconds on-screen.
(Some station names may
also appear if Channel
Caption is set. See page 20.)
When a function button is
pressed (PLAY, FF, etc.), the Combination VCR
mode will be displayed.
• When a recording is started, both REC and
the channel number will appear together.
Menu Screen
1 Press ACTION to
display the MAIN
MENU.
2 Press and
ACTION to make your
selection (see page 8).
• To get the most from each
feature, please read the
Operation Manuai before
attempting any operation.
SELECT :* ▼ ► KEY
SET :ACTI0N KEY
© ^
CCDSi EXIT
Warning and Instruction Displays
These displays will alert you of a missed operation or
provide further instructions.
If no active channels are
found for CHANNEL
MEMORY...
(see page 5.)
If you attempt to set or
review a Timer Recording or
set the On-Timer and the
Clock is not set... *
(see pages 8, 9.)
If you press REC on the
remote control or the
Combination VCR, and a
cassette is inserted with no
record tab...
(see page 16.)
If you press STOP
during a Timer
Recording...
(see page 19.)
NO CH FOUND
PLEASE CHECK ANTENNA
CABLE CONNECTION THEN
PUSH CH UP KEY AGAIN
PLEASE SET CLOCK
BEFORE PROGRAMMING
CHECK CASSETTE
RECORD TAB
TO CANCEL TIMER REC
HOLD DOWN STOP KEY
FOR APPRO)! 3 SEC
VCR Status & Clock Display
Press DISPLAY to display and remove the
overlay shown below.
Function
Status
Current Channel Caption
Time ■ (See page 20.)
Rec Time v. j—^
Remaining >
(OTRmode ^
only see
page 16.)
Tape Speed
Tape Counter
Blank Tape/ No Video Signal Indication
Whenever a blank section of a tape comes up
in Play mode, or when the selected channel
has no broadcast signal with the “Blue Back
ON/OFF Feature” (page 21) set to ON, the TV
screen will turn solid blue.
If you press PLAY, FF,
REW, or REC on the
remote control or the
Combination VCR without
a cassette inserted...
(see pages 15, 16.)
If the Combination VCR is
not in Stop mode or a
cassette with record tab is
not inserted two minutes
before a Timer Recording
is about to begin...
(see pages 18, 19.)
If head cleaning becomes
necessary while playing
back a tape...
(see page 25.)
If you press a function
button other than
STOP/EJECT or POWER
while the Combination VCR
is in VCR Lock mode...
(See page 21.)
NO CASSETTE
PLEASE INSERT A CASSETTE
PLEASE PREPARE
FOR T IMER REC
VIDEO HEADS MAY
NEED CLEANING
PLEASE INSERT HEAD
CLEANING CASSETTE
OB REFER TO MANUAL
END: PLAY KEY
VCR LOCK ACTIVATED
10
Loading...