Panasonic PV-D4743 Operating Instruction

DVD/VCR DECK

Operating Instructions

(Connection)

Initial Setup

Model No. PV-D4743

Connections and Initial Setup Procedures are on pages 12 to 17.

/

PV-D4743S

Operation

Basic

Operation

VCR

Operation

DVD

MULTI FORMAT PLAYBACK

Information

Ability to play back may depend on recording conditions.

As an ENERGY STAR Partner, Matsushita Electric Corporation
of America has determined that this product or product model
meets the ENERGY STAR guidelines for energy efficiency.

Please read these instructions carefully before attempting to connect, operate or adjust this
product. Please save this manual.
Spanish Quick Use Guide is included.
(Guía para rápida consulta en español está incluida.)

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [e-mail]

®

*

®

LSQT0674B

For Your

Important Safeguards and Precautions

FOR YOUR SAFETY, READ AND RETAIN ALL SAFETY
AND OPERATING INSTRUCTIONS. HEED ALL
WARNINGS IN THE MANUAL AND ON THE UNIT

INSTALLATION

1 POWER SOURCE CAUTION

Operate only from a power source indicated on the
unit or in this manual. If necessary, have your
Electric Utility Service Company or Video Products
Dealer verify the power source in your home.

2 POLARIZED OR GROUNDING PLUG

As a safety feature, this product comes with either
a polarized power cord plug (one blade is wider

than the other), or a three-wire grounding type plug.
POLARIZED PLUG CAUTION:
This plug will only fit into an outlet one way. If you cannot

fully insert the plug, try reversing it. If it still will not fit,
have an electrician install the proper wall outlet. Do not
defeat the safety feature by tampering with the plug.

GROUNDING PLUG CAUTION:
This plug will only fit into a three-hole grounding

outlet. If necessary, have an electrician install the
proper outlet. Do not defeat the safety feature by
tampering with the plug.

3 POWER CORD

Make sure power cords are routed so that they

are not likely to have anything rest on them, roll

over them, or be in the way of walking traffic.

If an extension cord is used, make sure it also

has either a polarized or grounded plug and that

the cords can be securely connected.

Frayed cords, damaged plugs, and damaged or

cracked wire insulation are hazardous and should

be replaced by a qualified service technician.

Overloaded outlets and extension cords are fire

hazards and should be avoided.

4 DO NOT BLOCK VENTILATION HOLES

Ventilation openings in the cabinet release heat

generated during operation. If they are blocked,

heat build-up inside the unit can cause failures that

may result in a fire hazard or heat damage to

cassettes or discs.

For protection, follow these rules:

a. Never cover ventilation slots or the unit while in

use, or operate the unit when placed on a bed,
sofa, rug, or other soft surface.

b. Avoid built-in installation, such as a book case

or rack, unless proper ventilation is provided.

5 PLACEMENT: AVOID EXTREMELY HOT LOCATIONS

OR SUDDEN TEMPERATURE CHANGES

Do not place the unit over or near heater or

radiator, in direct sunlight, inside closed vehicles,

in high temperature [over 104°F (40°C)], or in over

75% humidity. If the unit is suddenly moved from

a cold place to a warm one, moisture may

condense in the unit and on the tape causing

damage. Never subject the unit to vibration,

impact, or place it so that the surface is titled as

internal parts may be seriously damaged.

6 TO AVOID PERSONAL INJURY

• Do not place unsecured equipment on a sloping
surface.

• Do not place this unit on any support that is not
firm, level, and adequately strong.
The unit could fall causing serious
injury to a child or adult and
damage to the unit.

• An appliance and cart
combination should be moved
with care. Quick stops,
excessive force, and uneven
surfaces may cause the appliance and cart
combination to overturn.

• Carefully follow all operating instructions and
use the manufacturer's recommended
accessories when operating this unit or
connecting it to any other equipment.

2

1 SAFE ANTENNA AND CABLE CONNECTION

If an outside antenna or cable system is connected to the
equipment, be sure the antenna or cable system is grounded
so as to provide some protection against built up static
charges and voltage surges.
Section 810 of the National Electrical
Code, ANSI/NFPA 70 (in Canada,
part 1 of the Canadian Electrical
Code) provides information
with respect to proper grounding
of the mast and supporting
structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes and requirements for the grounding electrode.

2

KEEP ANTENNA CLEAR OF HIGH VOLTAGE POWER LINES OR CIRCUITS

An outside antenna system should be located well away from
power lines, electric light or power circuits and where it will never
come into contact with these power sources if it should happen
to fall. When installing an outside antenna, extreme care should
be taken to avoid touching power lines, circuits or other power
sources as this could be fatal. Because of the hazards involved,
antenna installation should be left to a professional.

If the unit has been in storage or moved to a new location,
refer first to the INSTALLATION section of these safeguards.

1

KEEP THE UNIT AWAY FROM WATER OR MOISTURE OF ANY KIND.

2 IF EQUIPMENT IS EXPOSED TO RAIN, MOISTURE, OR

STRONG IMPACT, unplug the unit and have it inspected by a

qualified service technician before use.

3 DURING AN ELECTRICAL STORM

During a lightning storm, whether indoors or outdoors, or
before leaving the unit unused for extended periods of time,
disconnect all equipment from the power source as well as
the antenna and cable system.

4 WHEN THE UNIT IS PLUGGED IN

• Never expose the unit to rain or water. DO NOT OPERATE

• Never drop or push any object through openings in the unit.

• Avoid placing the unit directly above or below your TV set

5 USING ACCESSORIES

Use only accessories recommended by the manufacturer to
avoid risk of fire, shock, or other hazards.

6 CLEANING THE UNIT

Unplug the unit. Then, use a clean, dry, chemically untreated
cloth to gently remove dust or debris. DO NOT USE cleaning
fluids, aerosols, or forced air that could over-spray, or seep
into the unit and cause electrical shock. Any substance such
as wax, adhesive tape, etc. may mar the cabinet surface.
Exposure to greasy, humid, or dusty areas may adversely
affect internal parts.

1 DO NOT SERVICE THIS PRODUCT YOURSELF

If, after carefully following the detailed operating
instructions, this product does not operate properly, do not
attempt to open or remove covers, or make any
adjustments not described in the manual. Unplug the unit
and contact a qualified service technician.

2 IF REPLACEMENT PARTS ARE REQUIRED

Make sure the service technician uses only parts specified
by the manufacturer, or those having the same safety
characteristics as the original parts. The use of unauthorized
substitutes may result in fire, electric shock, or other hazards.

HAVE THE SERVICE TECHNICIAN PERFORM A SAFETY CHECK

3

After any service or repairs to the unit, request the service
technician to conduct a thorough safety check as
described in the manufacturer’s service literature to ensure
that the unit is in safe operating condition.

OUTDOOR ANTENNA INSTALLATION

NEC

- NATIONAL
ELECTRICAL CODE

ELECTRIC
SERVICE
EQUIPMENT

USING THE UNIT

if liquid has been spilled into the unit. Immediately unplug
the unit, and have it inspected by a service technician.
Fire and shock hazards can result from electrical shorts
caused by liquid contact inside.

Some internal parts carry hazardous voltages and contact
can cause electric shock or fire hazard.
Do not put any foreign object on the disc tray.

as this may cause electrical interference. Keep all magnets
away from electronic equipment.

SERVICE

GROUND
CLAMP

ANTENNA
LEAD IN
WIRE

ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)

GROUNDING CONDUCTORS
(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)

Safety Precautions/Mesures de sécurité

1

WARNING: To prevent fire or shock hazard, do not expose this

equipment to rain or moisture.

CAUTION: To prevent electric shock, match wide blade of plug to

wide slot, fully insert.

Avertissement: Afin de prévenir tout risque d’incendie ou de chocs

électriques, ne pas exposer cet appareil à la pluie ou
à une humidité excessive.

Attention: Pour éviter les chocs électriques, introduire la lame la

plus large de la fiche dans la borne correspondante de la
prise et pousser jusqu’au fond.

This symbol warns the user that uninsulated voltage

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

within the unit may have sufficient magnitude to cause
electric shock.
Therefore, it is dangerous to make any kind of contact
with any inside part of this unit.

This symbol alerts the user that important literature
concerning the operation and maintenance of this unit
has been included. Therefore, it should be read
carefully in order to avoid any problems.

CAUTION:

UNIT IS A CLASS I LASER PRODUCT.
HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD
CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE THE UNIT CORRECTLY AS INSTRUCTED.

WHEN THIS UNIT IS PLUGGED TO THE WALL OUTLET, DO NOT PLACE
YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY AND OTHER
OPENINGS TO LOOK INTO THE INSIDE OF THIS UNIT.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT ATTEMPT TO REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.

FCC NOTE:

This equipment has been tested and found to comply with part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when operated in a residential
environment. If this equipment does cause interference to radio or television reception, which can be
determined by turning the equipment off and on, use the equipment in another location and/or utilize
an electrical outlet different from that used by the receiver.
If necessary, consult the dealer or an experienced radio/TV technician for help. The user may find the
booklet, “Something About Interference” available from FCC local regional offices helpful.

FCC Caution:

To assure continued compliance, (example- use only shielded interface cables when connecting to
other devices.) Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.

FCC Warning: Any unauthorized changes or modifications to this equipment would void the user’s

authority to operate.

CAUTION:

LASER RADIATION
WHEN OPEN DO NOT
STARE INTO BEAM.

ATTENTION:

RAYONNEMENT
LASER EN CAS
D’OUVERTURE.
NE PAS REGARDER
DANS LE FAISCEAU.

(Inside of product)

Region Management Information:

This DECK is designed and manufactured to respond to the
Region Management Information that is recorded on a DVD
disc. If the Region number described on the DVD disc does
not correspond to the Region number of this DECK, this
DECK cannot play this disc.

● The Region number for this DECK is “1”.

● The Player will play DVD-Video marked with labels

containing “1” or “ALL”.

Example:

ALL

1

2

4

3

Before Using

Congratulations

on your purchase of one of the most
sophisticated and reliable products on the
market today. Used properly, it will bring you
years of enjoyment. Please fill in the
information below. The serial number is on the
tag located on the back of your DECK.

• Date of Purchase

• Dealer Purchased From

• Dealer Address

• Dealer Phone No.

• Model No.

• Serial No.

Accessories

Remote Control

LSSQ0374 (PV-D4743)
LSSQ0375 (PV-D4743S)

Batteries 2 “AA”

RF Coaxial Cable
LSJA0372

To order accessories, call toll free
1-800-332-5368.

Loading the Batteries

1) Open cover.

2) Insert batteries as
marked.

3) Close cover.

Battery replacement caution

• Do not mix old and new batteries.

• Do not mix alkaline with manganese

batteries.

4

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [e-mail]

Disc formats supported by this DECK

DECK can play back discs bearing any of the following
marks:

Logo Disc type

Discs which cannot be played

• DVD with Region No. other than “1” or “ALL”

• DVD of PAL system, DVD-Audio, DVD-RAM, DVD-ROM,

DVD-RW, DVD+RW, CD-ROM, CDV, CD-G, CVD, SVCD,
SACD, Divx Video Disc and Photo-CD

[Discs Played 8cm (3") or 12cm (5")]

DVD (DVD-Video)
DVD-R (DVD-Video formatted

discs [finalized])
Video CD
CD (CD-DA)

CD-R/CD-RW (CD-DA,Video CD
formatted discs [finalized])
WMA, MP3, JPEG

Notes

• Do not use irregularly shaped discs (e.g. heart­shaped), as these can damage the unit.

• It may not be possible to play CD-R, CD-RW and
DVD-R in all cases due to the type of disc or
condition of the recording.

Disc Handling

Handling precautions

• Sticking a label on the disc may impair DVD-R
playback.

• Do not attach sticker to discs. (Do not use discs
with exposed adhesive from tape or left over
peeled-off stickers.)

• Only hold disc by edges as shown below.
Fingerprints, dirt and scratches can cause skipping
and distortion.

• Do not write on label side of disc.

• Never use record cleaning sprays, benzine, thinner,

static electricity prevention liquids, or any other
solvent.

Disc tray

Disc

• Do not try to close disc tray when disc
is not properly placed.

To clean disc surface

With a soft, damp (water only) cloth,
gently wipe from the center hole to the
outer edge as shown below. (Wiping in a
circular pattern will scratch the surface.)

If disc is brought from a cold to a
warm environment, moisture may
form on the disc

Wipe away moisture with a soft, dry, lint-free cloth
before using disc. (See above.)

Improper disc storage

Discs could be damaged if stored or left in areas:

• exposed to direct sunlight.

• that are humid or dusty.

• near heat (i.e. heater, radiator, etc.).

Table of Contents

DVD / VCR

Important Safeguards and Precautions ............................ 2, 3

Before Using ............................................................................ 4

DECK & Cassette Information ........................................... 6 , 7

Location of Controls ....................................................... 8 ~ 10

Displays (On Screen Displays and Multi Function Display) .................... 11

Connections .................................................................. 12 ~ 15

Initial Setup for Basic Connections (Ready to Play) .......... 16, 17

VCR
Reset Language, Channels, Clock, VCR’s Output Channel ... 18, 19

Playback/ Record on a Tape........................................... 20, 21

DVD

Basic DVD Operation ...................................................... 22, 23

Timer Recording.............................................................. 24, 25

MTS Broadcast/ VHS Hi-Fi Stereo System .................... 26, 27

Multi-Brand Control Feature ........................................... 28, 29

Tape Operation (Search System) ....................................... 30 ~ 32

Special VCR Features ..................................................... 33, 34

Copying Your Tapes (Dubbing) ......................................................... 35

(Connection)

Initial Setup

Operation

Basic

Operation

VCR

Disc Operation ............................................................... 36 ~ 40

DVD Operation using On-Screen Displays ................. 41 ~ 42

MP3/WMA/JPEG Playback Operation .......................... 43 ~ 45

DVD Lock Feature ................................................................. 46

Settings for DVD Operation .......................................... 47 ~ 49

Language Code List.............................................................. 50

DVD / VCR

Warning and Instruction Displays........................................ 51

Before Requesting Service............................................. 52, 53

Limited Warranty ............................................................. 54, 55

Customer Services Directory ............................................... 55

Spanish (Español) Quick Use Guide............................ 56 ~ 61

Index ................................................................................. 62, 63

Operation

DVD

Information

For Your

5

DECK & Cassette Information

Head Cleaning

Playing older or damaged tapes may eventually
cause video heads to become clogged.

Video Head Clog Sensor

During playback, this
screen appears if
clogging is detected.
To remove screen,
press PLAY on the
remote or DECK.

• Use “dry” type head cleaning cassette
only. (Part No. NV-TCL30PT is recommended.)

• Follow cleaning tape instructions carefully.
Excessive use of tape can shorten head life.

• If head clog symptoms persist, contact your
nearest servicenter by visiting our Web Site
(see p. 55).

V I D

EO HEADS MAY

N

EED

CLEAN I NG
PLEASE I NSERT HEAD
CLEAN I NG CASSETTE
OR REFER

TO

MANUAL

END

: PL

AY

Prevent Accidental Tape Erasure

Break off the tab to
prevent recording.

Record Tab

Screw driver

To record again

Cover the hole
with cellophane tape.

Record/ Playback Time

Only use tapes with the mark in this DECK.

Tape Speed

Setting

SP

(Standard Play)

LP

(Long Play)

SLP

(Super Long Play)

Type of Video Cassette

T160T120T60

1 Hour 2 Hours

2 Hours 4 Hours

2 Hours

40 Minutes

5 Hours

20 Minutes

3 Hours 6 Hours 8 Hours

Cleaning DECK

Use a soft cloth or dusting attachment of a vacuum cleaner to remove dust from the ventilation holes
on the back sides and bottom of the cabinet. Plastic surfaces are easily scratched and can be
marred by alcohol and various solvents. Avoid excessive use of oil-based furniture polishes since
the materials used in the cabinet will accumulate more dust. We recommend using a non-abrasive,
antistatic cleaner and polisher.

Features for a Quality Picture (VCR)

Digital Auto Picture

Automatically controls the video output signal for less noise depending on the tape condition.

Digital Auto Tracking

Continuously analyzes the signal and adjusts for optimum picture quality.

Manual Tracking Control
(to reduce picture noise)

Use during Playback and Slow Motion mode to reduce picture noise.
Press CH (TRACKING) / on the remote control or on DECK until the picture clears up.
To return to Auto Tracking, press POWER off, then on again a few seconds later.

R

R

R

R

V-Lock Control (to reduce picture jitter)
In Still mode, CH (TRACKING) / operate as a V-Lock control.

6

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [e-mail]

R

R

R

R

Specifications

Power Source: 120 V AC, 60 Hz
Power Consumption: Power On: Approx. 32 watts, Power Off: Approx. 4 watts

Video Signal: EIA Standard NTSC color
Video Recording System: 4 rotary heads helical scanning system

Audio Track: 1 track (Normal), 2 channel (Hi-Fi Audio Sound)
Tuner:
Broadcast Channels: VHF 2 ~ 13, UHF 14 ~ 69
CABLE Channels: Midband A through I (14 ~ 22), Superband J through W (23 ~ 36)

Input/Output Terminal: Audio/Video Line Input/Output, RF Input/Output
Input Terminal: Audio/Video Line Input (Front)
Output Terminal: S-Video Output (DVD only), Component Video Output (DVD only)

Operating Temperature: 5 °C ~ 40 °C (41 °F ~ 104 °F)
Operating Humidity: 10 % ~ 75 %
Weight: 4.9 kg (10.8 lbs).
Dimensions: 430 (W) x 95.5 (H) x 344 (D) mm

Discs Played
(1) DVD-Video Disc 5” (12 cm) single-sided single-layer

(2) Compact Disc 5” (12 cm) disc

(CD-DA, Video CD) 3” (8 cm) disc
(CD-R/CD-RW, MP3, WMA, JPEG)

Digital Audio Output: Digital Optical Connector
Pickup: Wavelength: 655 nm (DVD), 790 nm (Video CD/CD)

Note: • Designs and specifications are subject to change without notice.

Hyperband AA ~ EEE (37 ~ 64), Lowband A-5 ~ A-1 (95 ~ 99)
Special CABLE channel 5A (01), Ultraband 65 ~ 94, 100 ~ 125

Audio Output 2 (L), (R)

16-15/16” (W) x 3-12/16” (H) x 13-9/16” (D) inch

5” (12 cm) single-sided double-layer
5” (12 cm) double-sided double-layer (one layer per side)
3” (8 cm) single-sided single-layer
3” (8 cm) single-sided double-layer
3” (8 cm) double-sided double-layer (one layer per side)

Laser power: CLASS II

Definition of Terms (DVD)

Angle: Some DVD discs feature scenes simultaneously shot from different angles.

Chapter Number:Titles are subdivided into numbered sections. You can quickly search for

DVD: A high-density optical disc on which high-quality pictures and sound have

Playback Control:With Video CD (version 2.0), scenes or information may be selected for

Subtitles: Written dialogue which appears at the bottom of the screen.
Time Number: The elapsed play time from the start of a disc or title. Use to quickly find

Title Number: For DVD discs with two or more titles, the title is numbered as title 1, title 2, etc.
Track Number: Numbers assigned to tracks on Video CDs and CDs to allow specific tracks

Video CD: CD containing picture and sound with same quality level as video tape.

Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, 4,819,098 and 4,907,093,
licensed for limited viewing uses only.

This product incorporates copyright protection technology that is protected by method claims of
certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

The ANGLE button can be used to view the scene from different angles.
(ANGLE Indicator lights on DECK when a scene recorded at different
angles is detected.)

a favorite scene using these numbers.

been digitally recorded. DVD incorporates new video compression
technology (MPEG II) and high-density recording technology which allow
entire movies to be recorded with incredible playback quality.

viewing or listening from an interactive menu that appears on the TV screen.

scenes. (May not work with some discs.)

to be quickly located.

This DECK also supports Video CDs with playback control (version 2.0).

(Connection)

Initial Setup

7

Location of Controls

Remote Control

EJECT /

OPEN / CLOSE

pp. 20,

22

POWER

NUMBER keys

ACTION

pp. 18

, 47

SET

VCR mode

p. 28

STOP

pp. 20,

22

FAST FORWARD /

SEARCH / SLOW+

pp. 20,

23

REWIND /

SLOW-

pp. 20,

PAUSE /

pp. 20,

COMMERCIAL SKIP
ZERO

pp. 31, 32

SEARCH

23

STILL

23

Bold: VCR Function

Italic

:

DVD Function

Bold Italic:VCR and DVD Functions

Normal: Others

INPUT

p. 35

TV mode

p. 28

CHANNEL

TRACKING

VOLUME

ADD/DELETE /

pp. 19,

/

/

/

V-LOCK

pp. 6, 21

+

/

p. 28

CLEAR

39, 46

MENU

p. 38

SELECT

DVD mode

p. 28

PLAY

pp. 20,

SKIP
SKIP

p. 23

-

22

TITLE

p. 38

/

ZOOM

p. 37

ANGLE

p. 37

AUDIO

(SAP / Hi-Fi)

pp. 27,

36

COUNTER RESET

p. 32

VCR/TV

p. 21

RECORD

p. 21

PROGRAM

p. 24

EJECT button: When this button is pressed in VCR mode, the tape is ejected.

8

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [e-mail]

This button is inoperative if pressed during recording.
If pressed in DVD mode, the disc tray opens or closes.

Virtual Surround Sound

RETURN /

SUB TITLE

p. 36

ENTER

pp. 23,

28

TAPE POSITION

VOLUME ADJUST

DISPLAY

p. 34,

40

SEARCH

pp. 22,

30

p. 11,

41

SPEED

p. 21

/

/

Front View of DECK

Front View of DECK

Bold: VCR Function

Italic

:

DVD Function

:

Bold Italic

Normal: Others

STOP/EJECT

p. 20

FAST FORWARD/SEARCH

p. 20

PLAY

p. 20

REWIND/SEARCH

p. 20

POWER

Audio/Video
Input Connector 2
(LINE 2)

CHANNEL /
TRACKING/V-LOCK

pp. 6, 21

REC

p. 21

VCR and DVD Functions

p. 35

Reset All Memory Functions

If the disc cannot be removed...

First, unplug DECK. Then, prepare a rigid
wire (e.g. an extended paper clip) and,
applying moderate force, insert it straight
into the hole at the base of the tray.
The tray will eject a little. Now, pull the tray
all the way out and remove the disc.

Cassette
Compartment

Multi Function

Display

p. 11

Remote
Sensor

Over 2 inches

Disc Tray

Over 2 inches

OPEN/CLOSE

PROGRESSIVE

PAUSE

SKIP
SKIP

p. 22

p. 10

p. 23

p. 23

PLAY

p. 22

STOP

p. 22

(Connection)

Initial Setup

Use when moving DECK to new location, or if a mistake was made in the Initial
Setup section (return to Factory Setting).

• Make sure a tape is not inserted in the DECK.

Turn DECK Power on.

1

Press and hold both VCR PLAY

2

and CHANNEL
more than 5 seconds.

• The power shuts off.
Do “Doing Initial Setup (Ready to

3

21

Play)” on page 16.

on the DECK for

9

Location of Controls (continued)

Rear View of DECK

AC Power Plug

• While plugged into an AC outlet,
this DECK consumes 4 W of
electrical power in off mode.

Component Video Output
Connector (Y, P
p. 13

Optical Digital Audio
Output Connector
(DVD Only)
p. 15

B

, PR) (DVD Only)

Bold: VCR Function

Bold Italic:VCR and DVD Functions

VHF/UHF Antenna Output Terminal
p.12

VHF/UHF Antenna Input Terminal
p. 12

Video Output
Connector
p. 12

••

S-Video Out
Connector
(DVD Only)
pp. 10, 13

Audio Output 2
Connector (L/R)
p. 13

Audio Output 1

Italic:DVD Function

Video Input
Connector
p. 35

Audio Input
Connector (L/R)
p. 35

Connector (L/R)
p. 12

The following table shows the status of the output jacks when in VCR or DVD mode.

VCR

DVD

Video Output
Audio Out 1
Audio Out 2

YES
YES

Component
Video Output

N/A

S-VIDEO OUT

N/A

YES

• PROG functions on the remote are not available when using Component Video Output

Note

and S-VIDEO OUT. Please set TV to either RF INPUT or VIDEO INPUT, and then press
PROG.

To enjoy PROGRESSIVE SCAN video

(1). Connect

(See p. 13.)

(2). When the PROGRESSIVE button is pressed, the ON lamp lights up (see p. 9) and the

PROGRESSIVE SCAN signal is output from the

Note

• The PROGRESSIVE button can be operated when the DECK is in DVD function mode.

• The screen may shift off-center when using progressive output. Please adjust the screen

position if this occurs. (Refer to your TV manual.)

• The DECK outputs video signals (not PROGRESSIVE SCAN) from the “VIDEO OUT” and “S­VIDEO OUT” terminals when the ON lamp is lit.

10

Component Video Output

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [e-mail]

to the component video input terminals of a television.

Component Video Output Connector

.

Displays (On Screen & Multi Function)

On Screen Displays (VCR)

Function & Channel Displays

CH 0 8

When a function button
is pressed, e.g. PLAY,
or you change
channels, a 5-second
display appears.

VCR Status & Clock Displays
To display or remove
overlay at right,

➛➛

➛ press DISPLAY.

➛➛

Rec Time Remaining
(OTR mode only,
see p. 21.)

Multi Function Display

VCR mode Indicator

Lights up when
DECK is VCR mode.

Function Status

Broadcast Audio
Being Received
(See p. 26.)

Blank Tape/ No Video Signal
Indications

Whenever a blank section of a tape
comes up in Play mode, or when the
selected channel has no broadcast
signal with Weak Signal Display
Feature (p. 33) set to OFF, the TV
screen will turn solid blue.

Current Time

REC

1 2 : 0 0A

0 : 25

STER

EO
SAP
M

ONO

M

-0 : 1 2 : 3 4

CH 02

SP

Channel

Counter

Tape Speed
(See p. 6.)

DVD mode Indicator

Lights up when
DECK is DVD mode.

(Connection)

Initial Setup

Tape Indicator

Lights up when a tape
is inserted.

Hi-Fi Indicator

Lights up when Hi-Fi audio
is monitored in Play mode.

VCR

Hi - Fi

ANGLE

ANGLE Indicator

Lights up when a scene
recorded at different
angles is detected.
See p. 37. (DVD only).

Clock/ Status/ Channel/ Speed Display

Displays the current time. Briefly displays DECK
status when a function button is pressed. Briefly
displays the channel number, or “L1” or “L2” when
a channel or line input is selected. Briefly displays
the recording speed when SPEED is pressed.

DVD

REC

A
M

TIMER

AM/PM
Indicator

DISC Indicator

Lights up when a disc
is inserted.

VCR REC Indicator

Lights up during
recording.

Timer Indicator

Lights up when DECK is set
for Timer Recording, or when
One Touch Recording (OTR)
is used. Flashes when Timer
Recording is set, but a tape
has not been inserted into
DECK and when a power
interruption occurs during
Timer Programming.

11

Connections

Basic Connections

• If your TV has AUDIO and VIDEO IN terminals, connect them to DECK for higher

quality picture and sound.

• You can enjoy stereo sound even if your TV is not stereo by connecting a stereo

amplifier to DECK.

• Connect DECK and TV with an RF Coaxial Cable a (supplied) or an AV Cable
(not supplied) as shown in the figure below.

■ ■

■ ■

■ DSS Receiver DECK TV

■ ■

■ ■

■ DECK TV

■ ■

Antenna or Cable

■ Cable Box DECK TV

■ ■

b

DSS
Receiver

IN

IN

OUT

or

DVD/VCR DECK

IN FROM ANT.

OUT

IN 1

VIDEO

L

AUDIO

R

WARNING

When using “Nut type” RF coaxial cables, tighten with
fingers only. Overtightening may damage terminals.

VHF/UHF

OUT TO TV

IN

OUT

Cable Box

1 Disconnect antenna or cable from TV

and connect to DECK.

2 Connect DECK to TV with RF Coaxial Cable.

RF COAXIAL CABLE

a

TV

VHF/
UHF

AUDIO IN

R

VIDEO

IN

L

b

AV CABLE

(not supplied)

Note to CABLE system installer

This reminder is provided to call the CABLE system installer’s attention to Article 820-40 of the
NEC in USA (and to the Canadian Electrical Code in Canada) that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.

12

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [e-mail]

Other Connections

■ ■

■ With a Cable Box (DECK

■ ■

DVD/VCR DECK

IN FROM ANT.

IN 1

OUT

VHF/UHF

OUT TO TV

■■

■

Connect With Two Cable Boxes

■■

ANT or CATV

Cable Box

Cable Box TV)

OUTIN

DVD/VCR DECK

ANT

or

CATV

Cable Box

OUT

IN

2-Way Splitter

OUT 1

OUT 2

OUT

Cable Box

OUTIN

IN 1

IN FROM ANT.

VHF/UHF
OUT TO TV

A/B Switch

IN 2IN 1

VHF/
UHF

• view any
(including

• use Remote

• record and view

TV

AUDIO

VIDEO

scrambled)
channel.

Control to select
channels without
using Multi-brand
control feature.

both scrambled
and unscrambled
channels if
additional
equipment is
added.
This connection
requires: two
converter boxes,
an A/B switch,
and a 2-way
splitter.

TV

IN

OUT

R

AUDIO

L

VIDEO

IN

OUT

R
L

VHF/
UHF

You CannotYou Can

• record
scrambled
channels.

You CannotYou Can

• view a channel
other than the
one selected
for any type of
recording.

• do a Timer
recording of a
channel unless
you select it on
the Cable Box.

Connections For DVD Only (enjoying higher picture quality)

Connect AUDIO OUT2 (L, R) to the AUDIO IN (L, R) of the TV. (audio input for COMPONENT

1

or S-VIDEO mode).
If your TV has COMPONENT VIDEO INPUT, connect to COMPONENT VIDEO OUT.

2

If your TV does not have COMPONENT VIDEO INPUT but has S-VIDEO INPUT, connect to
S-VIDEO OUT.

When in DVD mode, set your TV to either COMPONENT VIDEO IN or S-VIDEO IN.

3

• You can watch DVDs through the S-VIDEO or COMPONENT VIDEO, VHF/UHF OUT TO TV,

Notes

DVD OUTPUT

S-VIDEO OUT

and VIDEO OUT connections to your TV. The VCR and TUNER pictures are available only
from the VIDEO OUT and VHF/UHF OUT TO TV connections to your TV.

• PROG functions on the remote are not available when using S-VIDEO OUT and COMPONENT
Video Output. Please set TV to either RF INPUT or VIDEO INPUT, and then press PROG.

• TV must have capability to accept and display a progressive scan signal to use
PROGRESSIVE mode. Consult your TV operating instructions.

DVD/VCR DECK

COMPONENT

VIDEO OUT

Y

P

B

P R

AUDIO OUT2

L

R

PB

PR

IN

Y

IN

L

L

R

R

TV

AUDIO

VIDEO

S-VIDEO
IN

From DECK’s

A/V OUTPUT

IN

(Connection)

Initial Setup

or

13

Connections (continued)

Audio Connections

Ready Checklist

Turn down the volume, then turn DECK, as well as other equipment to be connected,
off before proceeding with connection.
Do not block ventilation holes of any of the equipment and arrange them so that air can
circulate freely.
Read through the instructions before connecting other equipment.
Ensure that you observe the color coding when connecting audio and video cables.

■ Connecting Amplifier (2ch stereo system) [Analog connection]

DVD/VCR DECK

AUDIO OUT2

L

Speaker

Amplifier

AUDIO IN

R L

R

Enjoying digital audio output from the digital audio output connector

Notes on audio output from the optical digital audio output connector

Disc
DVD

Sound recording format

Dolby Digital

Linear PCM
(48/96 kHz 16/20/24bit)

DTS

Video CD
CD
MP3

WMA

*1 The type of audio output from the connector can be selected by the Settings for DVD

Operation. (See p. 48.)

*2 Sound having 96 kHz sampling is converted into 48 kHz sampling when it is output

from the DECK’s optical digital audio output connector.

MPEG 1
Linear PCM

MP3
WMA

For your reference:

• Dolby Digital is a digital sound compression technique developed by the Dolby Laboratories
Licensing Corporation. Supporting 5.1-channel surround sound, as well as stereo (2-channel)
sound, this technique enables a large quantity of sound data to be efficiently recorded on a disc.

• Linear PCM is a signal recording format used in CDs. While CDs are recorded in 44.1 kHz/16 bit,
DVDs are recorded in 48 kHz/16 bit up to 96 kHz/24 bit.

• If you have a Dolby Pro Logic Surround decoder, you will obtain the full benefit of Pro Logic from
the same DVD movies that provide full 5.1 channel Dolby Digital soundtracks, as well as from
titles with the Dolby Surround mark. For information on Panasonic or Technics Dolby Pro Logic
Surround Sound Decoders please contact your local dealer.

Optical digital audio output from connector

Dolby Digital bitstream (1-5.1 ch)
or PCM (48 kHz sampling/16 bit only)*

Linear PCM (2ch)
(48 kHz sampling/16 bit only)*

Bitstream or PCM (48 kHz sampling/16 bit only)*
PCM (44.1 kHz sampling)

Linear PCM (44.1 kHz sampling)
Linear PCM (It depends on the MP3 file)
Linear PCM (It depends on the WMA file)

Speaker

1

2

1

Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,674,
5,974,380, 5,978,762 and other world-wide patents issued and pending. “DTS” is a registered
trademark of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All
rights reserved.

Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

14

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [e-mail]

■ Connecting Amplifier (5.1 ch Surround system) [Digital connection]

DECK Dolby Digital Decoder Amplifier Speaker

or

DECK DTS (digital theater systems) Decoder Amplifier Speaker

When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital bitstream
or DTS bitstream is output from the DECK OPTICAL digital audio output connector.
When DECK is connected to a Dolby Digital decoder or DTS decoder, you can
enjoy theater-quality audio in your home. [An optical digital audio cable (optional)
is required when an optional Dolby Digital decoder or DTS decoder is used.]

Notes on connecting an optical
digital audio cable (optional)

• Firmly connect the cable to the

connector.

(Connection)

Initial Setup

Surround
Speaker

[5.1ch Surround system]

Center
Speaker

Surround
Speaker

DVD/VCR DECK
(Rear)

Optical Digital
Audio Cable
(optional)

Caution for optical digital audio output connector:

• When connecting an amplifier (with an Optical Digital Input Connector) which does not
contain the Dolby Digital or DTS decoder, be sure to select “PCM” at “Dolby Digital”
and “PCM” at “dts” of the Settings for DVD Operation “AUDIO OUTPUT” (see p. 48).
Otherwise, any attempt to play DVDs may cause such a high level of noise that it may
be harmful to your ears and damage your speakers.

• When a Dolby Digital/DTS decoder is connected, please select “Bitstream” at “dts” or
“Dolby Digital” of the Settings for DVD Operation “AUDIO OUTPUT”.
If “PCM” is selected, there will be stereo sound. (See p. 48).

• Video CDs and CDs can be played as usual.

Note:

• Some DTS decoders which do not support DVD-DTS interface may not work properly with
DECK.

Decoder with
Dolby Digital /DTS
processing (optional)

To Optical
Digital Audio
Input Connector

Front
Speaker

Front
Speaker

Amplifier

Subwoofer

15

Initial Setup for Basic Connections (Ready to Play)

Before doing Initial Setup

Turn TV on.

1

See connections a RF Coaxial Cable Connection and b AV Cable Connection on p. 12.

2

<RF Coaxial Cable Connection>
Set TV to channel 3.

<AV Cable Connection>

Set TV to VIDEO.

[DECK

3

• Go to “Doing Initial Setup (Ready to Play).” (See below.)

[Cable Box

• Turn on Cable Box and set it to your Public Broadcasting Station (PBS) channel

• If you use a DSS Receiver, it must be turned off.

Doing Initial Setup (Ready to Play)

Press VCR on remote for VCR mode.

1

Plug DECK Power Cord into AC wall outlet. DECK comes on and auto channel
and clock set starts.

2

• If screen below does not appear, check DECK - TV connection and, if TV is tuned to

• To change VCR’s output channel, please refer to “VCR’s Output Channel” on p. 19.

➛➛

➛ TV]

➛➛

➛➛

➛ DECK

➛➛

in your time zone.

channel 3, try switching it to channel 4.

➛➛

➛ TV], [DSS

➛➛

➛➛

➛ DECK

➛➛

➛➛

➛ TV]

➛➛

16

Plugging the AC Power Plug into
an AC outlet

CH AUTO SET PROCEEDING

CANCEL : STOP

AUTO CLOCK SET

PROCEEDING

CANCEL : STOP

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [e-mail]

Notes

• Function buttons are inoperative during Initial Setup.

• To remove a cassette during Auto Set, press EJECT on

the remote or STOP/EJECT twice on the DECK.
In this case, settings must be made manually. (See p. 18.)

• Depending on conditions, Auto Clock Set may take longer
than 30 minutes. If so, press STOP to stop setup and
perform settings manually. (See p. 18.)

Continued on next page...

*Important: If a remote control button does not work when pressed,

press the VCR button on the remote and try the button again.

EJECT

ACTION

SELECT

SET

VCR

Settings are made automatically.
When setup is done, this screen appears.

3

6 / 8/ 20 03

SUN 2 : 20P

: CH

DST :

SETT I NG

AUTO CLOCK SET

COMPLETED

M

ON

10

If “AUTO CLOCK SET IS INCOMPLETE”
appears, manually set clock. See below.

AUTO CLOCK SET IS
I NCOM

PLETE

PLEASE SET CLOCK BY

ACT I ON KEY

PRESSING

Manual Clock Set

If Auto Clock Set was incomplete.

Press ACTION* on remote to display
CLOCK screen.

1

(Connection)

Initial Setup

STOP

SET CLOCK

1 / /

- - - - - - - - -- - - - - - - -- - - - - -

SELE CT MONTH

SELECT :
SET :SET
EXIT

: ACT I ON

Press
set. In the same manner, select and set the

2

to select the month and SET to

:

DST : O

N

date, year, time, and DST (Daylight Saving
Time).

SET CLOCK

6 / 8 / 2003 SUN 2: 2 0 PM

- - - - - - - - -- - - - - - - -- - - - - -

SET COMPLETE

SET : S
START :

Press ACTION to start clock and exit.

3

DST :

D

ET BACK :

ACT I O

N

ON

17

SELECT :
EXIT

: ACTION

SET : SET

MENU
SET UP VCR

SET CLOCK

SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH:3

Reset Language, Channels, Clock, VCR’s

AUTO CLOCK SET

MANU

AL

T I M

E ZONE AD

JUS

T :

0

SELECT :

SET :

SET

EXIT

: ACT I ON

SET CLOCK

DST :

ON

6 / 8 / 2003 SUN 12: 0 0 PM

SELECT HOUR

- - - - - - - - -- - - - - - - -- - - - - -

SET CLOCK

SELE

CT :

SET

:

SET BACK :

EXIT

: ACT I ON

1

2

MENU

SET UP VCR

SET CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH:3

SELECT :

: ACTION

SET:SET

EXIT

Press ACTION*

to display MENU.

Language

1) Press to select

language item.

MENU
SET UP VCR
SET CLOCK
SET UP CHANNEL

IDIOMA/LANGUE : ENGLISH

VCR’S OUTPUT CH:3

SELECT :

: ACTION

: ACTION

SET:SET

FIJAR : SET

➡

REGLER:SET

➡

SET:SET

EXIT

: ACTION

2) Press SET repeatedly to

change language item as
shown below.

MENU
PREPARAR VCR
FIJAR RELOJ
FIJAR CANAL

LANGUE/LANGUAGE:ESPAÑOL

CANAL DE SALIDA : 3

ELEGIR :
SALIR

For Spanish

MENU
REGLAGE MAGNETOSCOPE
REGLAGE HORLOGE
REGLAGE CANAL

LANGUAGE/IDIOMA:FRANÇAIS

CA SORTIE : 3

SEL. :
QUITTER

For French

MENU
SET UP VCR
SET CLOCK
SET UP CHANNEL

IDIOMA/LANGUE : ENGLISH

VCR’S OUTPUT CH:3

SELECT :
EXIT

: ACTION

For English

3) Press ACTION to exit.

• PROGRAM functions are not available
when using COMPONENT Video Output
and S-VIDEO OUT. Please set TV to
either RF INPUT or VIDEO INPUT, and
then press PROGRAM.

Channels

1) Press to select

“SET UP CHANNEL,”
and press SET.

MENU
SET UP VCR
SET CLOCK

SET UP CHANNEL

IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH:3

SELECT :

:

CABLE

: ACT I ON

SET : SET

NNE

L

SPLAY : OFF

SET : SET

EXIT

: ACTION

2) Press to select

“ANTENNA,” then
press SET to set your
antenna system
(“TV” or “CABLE.”)

SET UP CHA

ANT

ENNA

AUTO SET
WEAK

S I GNAL D I

SELECT :
EXIT

3) Press to select

“AUTO SET,” then
press SET.

• If you use a Cable Box,
set it to the PBS channel
in your time zone.

CH AUTO SET PROCEEDING

CANCEL : STOP

• After Channel Auto Set
is finished, Auto Clock
Set will be performed.

Clock

1) Press to select

“SET CLOCK,” and

press SET.

2) Press to select
“MANUAL,” and press SET.
(For Auto Clock Set, select
“AUTO CLOCK SET.”)

(“TIME ZONE ADJUST”

appears only when auto
clock is set.)

3) Press and to

select, then set the date,
time, and DST (Daylight
Saving Time).

4) Press ACTION to start

Clock and exit this
mode.

18

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [e-mail]

C

HANNEL

08 ADDED

C

HANNEL

08 DELE T

ED

*Important: If a remote control button does not work

when pressed, press the VCR button
on the remote and try the button again.

POWER

CH /

NUMBER
keys

Time Zone Adjust

(Only when Auto Clock is set.)

1) Press to select

“SET CLOCK,” and
press SET.

MENU
SET UP VCR

SET CLOCK

SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH:3

SELECT :
EXIT

: ACTION

2) Press to select

“TIME ZONE ADJUST,”

AUTO CLOCK SET
MANU

T I M

SELECT :
EXIT

: ACT I ON

and press SET to
subtract or add hour(s)
as necessary.

3) Press ACTION twice.

•“TIME ZONE ADJUST”
returns to “0” if clock is
set manually.

SET : SET

SET CLOCK

AL

E ZONE AD

JUS

SET : SET

T :

0

VCR’s Output
Channel

1) Press to select

“VCR’S OUTPUT CH.,”
and press SET.

MENU
SET UP VCR
SET CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH

VCR’S OUTPUT CH:3

SELECT :
EXIT

: ACTION

2) Press SET.

I F YOU PRESS
KEY, VCR’
SW I

TCHES TO

3) Press ACTION.

PLEASE TUNE YOUR TV TO
CH 4.

➡

After 3 seconds

MENU
SET UP VCR
SET CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH

VCR’S OUTPUT CH:4

SELECT :
EXIT

: ACTION

• To Make Corrections,
repeat steps 1) ~ 3).

SET : SET

ACT I O

S OUTPUT CH

CH 4.

SET : SET

N

ADD/DLT
SELECT

SET

VCR

ACTION

Add or Delete a Channel

To add channel:
Select channel with NUMBER keys

and press ADD/DLT.

To delete channel:
Select channel with CH / or

NUMBER keys and press ADD/DLT.

DST (Daylight Saving Time)

DECK auto adjusts clock for DST.
(p. 17.)

Spring (First Sunday in April)

DST:ON

Autumn (Last Sunday in October)

DST:ON

➛➛

➛ Sets clock ahead one hour.

➛➛

➛➛

➛ Turns clock back one hour.

➛➛

Operation

Basic

• If your area does not observe
Daylight Saving Time, select
DST:OFF.

• Keep these time changes in mind
when programming DECK for
timer recordings.

19

Playback/ Record on a Tape

Ready Checklist

All connections are made (pp. 12 ~ 15).
TV and DECK are plugged in.
TV is on and tuned to CH 3, 4, or VIDEO.
Remote is in VCR mode. (Press VCR.)

Playback a Tape

Insert a tape.

1

• DECK power comes on. If Auto VCR/TV (see
p.32) is set to “OFF,” press VCR/TV on the
remote to be VCR mode.

Press PLAY* to play a tape.

2

• If tape has no rec. tab (p. 6), auto play begins.

Special Features During Play

Forward/Reverse Scene Search

➛➛

➛ Press FF/SLOW+ or REW/SLOW-.

➛➛
➛➛

➛ Press PLAY to release.

➛➛

After search has begun, each additional press of
FF or REW changes speed as shown below.

[SLP] : Approx. 21X
[LP] : Approx. 9X
[SP] : Approx. 7X

If at 21X, 9X, or 7X speed the picture is
interrupted, change speed to 9X, 7X, or 3X.

Notes

• Picture interruption may occur with some TVs.

• FF and REW search speed may vary

depending on current tape position.

Still (Freeze) Picture

➛➛

➛ Press PAUSE/STILL.

➛➛
➛➛

➛ Press PLAY to release.

➛➛

Frame by Frame Picture

➛➛

➛ Press PAUSE/STILL in Still mode.

➛➛
➛➛

➛ Press PLAY to release.

➛➛

Slow Motion Picture

➛➛

➛ Press FF/SLOW+ (increase speed) or

➛➛

REW/SLOW- (decrease speed) in Still
mode.

➛➛

➛ Press PLAY to release.

➛➛

↔ Approx. 9X
↔ Approx. 7X
↔ Approx. 3X

EJECT

CH /

VCR

STOP

REW/

SLOW-

PAUSE/

STILL

VCR/TV

REC

Notes

• These features work best in SP or SLP mode.

• The sound will be muted.

• To reduce picture noise, see “Manual Tracking
Control” on p. 6.

• After DECK is in Still or Slow mode for 3 minutes,

it will switch to Stop mode automatically to
protect the tape and the video head.

DVD

PLAY

FF/
SLOW+

SPEED

Playback using DECK buttons

21

Press PLAY.

Insert a tape.

Press STOP to stop a tape.

3

Press REW/SLOW- or FF/SLOW+ in Stop
mode to rewind or fast forward a tape.

Press EJECT on remote, or STOP/EJECT

on DECK to eject a tape.

20

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [e-mail]

Multi Function Display

Press STOP/EJECT to stop
and/ or eject a tape.