Panasonic pt-vz615nu, pt-vz585nu, pt-vw545nu operating instructions

Operating Instructions

Functional Manual

LCD Projector

Model No.

PT-VZ585N PT-VW545N PT-VX615N

Commercial Use

Thank you for purchasing this Panasonic product.

■ Before operating this product, please read the instructions carefully, and save this manual for future use.

■ Before using your projector, be sure to read “Read this rst!” (Æ pages 4 to 15).

ENGLISH

DPQP1163ZB

Contents

Read this first! ............................................4

Chapter 1 Preparation

Precautions for use ................................................. 19

Cautions when transporting .................................. 19

Cautions when installing ....................................... 19

Cautions when setting the projectors ................... 20

Security ................................................................ 21

Notes on Using Wireless Connection ................... 22

DIGITAL LINK ....................................................... 23

Early Warning Software ........................................ 23

Storage ................................................................. 23

Disposal ................................................................ 23

Cautions on use ................................................... 23

Accessories .......................................................... 25

Optional accessories ............................................ 26

About your projector ............................................... 27

Remote control ..................................................... 27

Projector body ...................................................... 28

Preparing the remote control ................................. 31

Inserting and removing batteries .......................... 31

When using the system with multiple projectors .. 31

Attaching the lens cap ............................................ 32

Chapter 2 Getting Started

Setting up ................................................................. 34

Installation mode .................................................. 34

Parts for ceiling mount (optional) .......................... 35

Screen size and throw distance ........................... 35

Connecting ............................................................... 39

Before connecting ................................................ 39

Connecting example: AV equipment .................... 40

Connecting example: Computers ......................... 41

Connecting example: Using DIGITAL LINK .......... 42

Chapter 3 Basic Operations

Switching on/off the projector ................................ 45

Connecting the power cord .................................. 45

Power indicator ..................................................... 45

Switching on the projector .................................... 46

When the initial setting screen is displayed .......... 47

Making adjustments and selections ..................... 48

Switching off the projector .................................... 49

Direct power off function ....................................... 50

Projecting ................................................................. 51

Selecting the image input for projection ............... 51

How to adjust the state of the image .................... 53

Adjusting adjustable feet ...................................... 54

Adjusting the projection position with the optical

axis shift function ............................................... 54

Using the USB memory........................................... 55

Attentions for use ................................................. 55

USB memory that can be used with the projector 55

Attaching the USB memory .................................. 55

Removing the USB memory ................................. 55

Operating with the remote control ......................... 56

Using the AV mute function .................................. 56

Using the mute function ........................................ 56

Adjusting the volume ............................................ 56

Using the freeze function ...................................... 57

Using the auto setup function ............................... 57

Using the screen adjustment function .................. 57

Using the digital zoom function ............................ 58

Using the FUNCTION button ................................ 58

Using the presentation timer function ................... 59

Setting the ID number on the remote control ....... 59

Chapter 4 Settings

On-screen menu ...................................................... 61

Navigating through the menu ............................... 61

Main menu ............................................................ 62

Sub menu ............................................................. 63

[PICTURE] menu ...................................................... 65

[PICTURE MODE] ................................................ 65

[CONTRAST] ........................................................ 65

[BRIGHTNESS] .................................................... 65

[COLOR] ............................................................... 65

[TINT] ................................................................... 66

[SHARPNESS] ..................................................... 66

[COLOR TEMPERATURE] ................................... 66

[GAMMA] .............................................................. 67

[IRIS] .................................................................... 67

[DAYLIGHT VIEW] ................................................ 67

[DIGITAL CINEMA REALITY] ............................... 67

[NOISE REDUCTION] .......................................... 68

[TV-SYSTEM] ....................................................... 68

[RGB/YCBCR] / [RGB/YPBPR] ................................ 68

[RGB-SYSTEM] .................................................... 69

[POSITION] menu .................................................... 70

[REALTIME KEYSTONE] ..................................... 70

[SCREEN ADJUSTMENT] ................................... 70

[SHIFT] ................................................................. 73

[DOT CLOCK]....................................................... 74

[CLOCK PHASE] .................................................. 74

[OVER SCAN] ...................................................... 75

[ASPECT] ............................................................. 75

[FRAME LOCK] .................................................... 76

[LANGUAGE] menu ................................................. 77

Switching the display language ............................ 77

[DISPLAY OPTION] menu ........................................ 78

[COLOR ADJUSTMENT] ...................................... 78

[COLOR CORRECTION] ..................................... 79

2 - ENGLISH

Contents

[ON-SCREEN DISPLAY] ...................................... 80

[HDMI SIGNAL LEVEL] ....................................... 81

[DIGITAL LINK SIGNAL LEVEL] ......................... 81

[CLOSED CAPTION SETTING] (Only for NTSC

input) ................................................................. 82

[SCREEN SETTING] ........................................... 82

[STARTUP LOGO] ................................................ 83

[AUTO SETUP SETTING] .................................... 83

[SIGNAL SEARCH] .............................................. 83

[BACK COLOR] .................................................... 84

[P-TIMER] ............................................................. 84

[OTHER FUNCTIONS] ......................................... 85

[PROJECTOR SETUP] menu .................................. 87

[STATUS] .............................................................. 87

[COMPUTER2 SELECT] ...................................... 87

[PROJECTOR ID] ................................................. 87

[INITIAL START UP] ............................................. 88

[PROJECTION METHOD] .................................... 88

[LAMP POWER] ................................................... 88

[ECO MANAGEMENT] ......................................... 89

[RS-232C] ............................................................. 90

[EMULATE] ........................................................... 91

[FUNCTION BUTTON] ......................................... 91

[AUDIO SETTING] ............................................... 92

[TEST PATTERN] ................................................. 93

[FILTER COUNTER]............................................. 93

[INITIALIZE ALL] .................................................. 94

[SECURITY] menu ................................................... 95

[PASSWORD] ....................................................... 95

[PASSWORD CHANGE] ...................................... 95

[TEXT DISPLAY] .................................................. 96

[TEXT CHANGE] .................................................. 96

[MENU LOCK] ...................................................... 96

[MENU LOCK PASSWORD] ................................ 96

[CONTROL DEVICE SETUP] ............................... 97

[NETWORK/USB] menu .......................................... 98

[DIGITAL LINK MODE] ......................................... 98

[DIGITAL LINK STATUS] ...................................... 98

[DIGITAL LINK MENU] ......................................... 99

[WIRED LAN] ....................................................... 99

[WIRELESS LAN] ............................................... 100

[PROJECTOR NAME] ........................................ 103

[NETWORK CONTROL] .................................... 103

[Panasonic APPLICATION] ................................ 104

[MIRRORING] .................................................... 106

[MEMORY VIEWER] .......................................... 108

[NETWORK STATUS] ........................................ 109

[INITIALIZE] ........................................................ 109

Chapter 5 Operation of Function

Network connection ...............................................111

Connecting via wired LAN ................................... 111

Connecting with Wireless LAN ............................113

Web control function ............................................. 116

Computer that can be used for setting ................116

Accessing from the web browser ........................116

Projecting with Panasonic APPLICATION ........... 133

Available application software ............................ 133

Connecting the devices ...................................... 133

Terminating connection with the device .............. 133

Idle screen descriptions ...................................... 134

Using the moderator mode of Panasonic

APPLICATION ................................................. 135

Projecting with MIRRORING ................................. 136

Connecting the devices ...................................... 136

Terminating connection with the device .............. 137

Using the moderator mode of MIRRORING ....... 137

Operating from the web browser ........................ 138

[Moderator Mode] page descriptions .................. 139

Projecting with Memory Viewer ........................... 140

Images that can be played back with the

Memory Viewer function .................................. 140

Displaying the Memory Viewer screen ............... 141

Operating the Memory Viewer screen ................ 141

Playing back still images .................................... 143

Playing back movies ........................................... 144

Memory Viewer screen descriptions .................. 146

Using the Paring function ..................................... 147

Pairing the USB memory .................................... 147

Chapter 6 Maintenance

Lamp and Temperature indicators ....................... 150

When an indicator lights up ................................ 150

Maintenance/replacement..................................... 151

Before performing maintenance/replacement .... 151

Maintenance ....................................................... 151

Replacement ...................................................... 153

Troubleshooting .................................................... 157

FAQ ......................................................................... 159

Wireless LAN connection ................................... 159

MIRRORING connection .................................... 159

Chapter 7 Appendix

Technical information ........................................... 162

PJLink protocol ................................................... 162

Control commands via LAN ................................ 163

<SERIAL IN> terminal ........................................ 166

[MENU LOCK PASSWORD] operations ............ 168

List of compatible signals ................................... 169

Glossary for network functions ........................... 172

Specications ........................................................ 174

Dimensions ............................................................ 178

Ceiling mount bracket safeguards....................... 179

Index ....................................................................... 180

ENGLISH - 3

Read this rst!

WARNING:

The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779.

WARNING:

1. Remove the plug from the mains socket when this projector is not in use for a prolonged period of time.

2. To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualied service personnel.

3. Do not remove the earthing pin on the mains plug. This apparatus is equipped with a three prong earthing

type mains plug. This plug will only t an earthing-type mains socket. This is a safety feature. If you are

unable to insert the plug into the mains socket, contact an electrician. Do not defeat the purpose of the earthing plug.

WARNING:

This equipment is compliant with Class A of CISPR32. In a residential environment this equipment may cause radio interference.

WARNING:

THIS APPARATUS MUST BE EARTHED.

To prevent damage which may result in re or shock hazard, do not expose this appliance to rain

or moisture.

This device is not intended for use in the direct eld of view at visual display workplaces. To avoid incommoding reections at visual display workplaces this device must not be placed in the direct eld of view.

The equipment is not intended for used at a video workstation in compliance BildscharbV.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING:

RISK OF ELECTRIC SHOCK. DO NOT OPEN.

AVERTISSEMENT:RISQUEDECHOCÉLECTRIQUE.

NEPASOUVRIR.

WARNUNG:ZURVERMEIDUNGEINESELEKTRISCHEN

SCHLAGESGERÄTNICHTÖFFNEN.

ПРЕДУПРЕЖДЕНИЕ:ОПАСНОСТЬ ПОРАЖЕНИЯ ЭЛЕКТРИЧЕСКИМ

ТОКОМ. НЕ ОТКРЫВАТЬ.

경고:감전 위험이 있으므로 열지마십시오.

Indicated on the projector

The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of

important operating and maintenance (servicing) instructions in the literature accompanying the

product.

TURN THE POWER OFF AND DISCONNECT THE POWER PLUG FROM THE WALL OUTLET BEFORE REPLACING THE LAMP UNIT.

Do not look at the light emitted from the lens while the projector is being used.

WARNING:

Do not place objects in front of the lens while the projector is being used.

4 - ENGLISH

Indicated on the projector

Read this rst!

CAUTION:

This is a device to project images onto a screen, etc., and is not intended for use as indoor lighting in a domestic environment.

To assure continued compliance, follow the attached installation instructions. This includes using the provided power cord and shielded interface cables when connecting to computer or peripheral

devices. Also, any unauthorized changes or modications to this equipment could void the user's

authority to operate this device.

Directive 2009/125/EC

CAUTION (North/Middle/South America)

This equipment is equipped with a three-pin grounding-type power plug. Do not

remove the grounding pin on the power plug. This plug will only t a grounding-type

power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician. Do not defeat the purpose of the grounding plug.

Do not remove

WARNING (USA and Canada)

• Not for use in a computer room as dened in the Standard for the Protection of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75.

• For permanently connected equipment, a readily accessible disconnect device shall be incorporated in the building installation wiring.

• For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.

NOTIFICATION (Canada)

This class A digital apparatus complies with Canadian ICES-003.

Contains mercury / Contenu avec mercure

For more information on safe handling

procedures, the measures to be taken in

case of accidental breakage and safe

disposal options visit:

ec.gc.ca/mercure-mercury/.

Dispose of or recycle in accordance with

applicable laws.

Pour plus de renseignements sur les

procédures de manutention sécuritaire, les

mesures à prendre en cas de bris accidentel et

les options d’élimination sécuritaire visitez:

ec.gc.ca/mercure-mercury/.

Mettez au rebut ou recyclez conformément

aux lois applicables.

NOTIFICATION (USA)

• This product has a High Intensity Discharge (HID) lamp that contains mercury. Disposal may be regulated in your community due to environmental considerations. For disposal or recycling information, please visit Panasonic website: http://www.panasonic.com/environmental or call 1-888-769-0149.

ENGLISH - 5

Read this rst!

FCC NOTICE (USA)

Verication

Model Number: PT-VZ585N, PT-VW545N, PT-VX615N Trade Name: Panasonic Responsible Party: Panasonic Corporation of North America Address: Two Riverfront Plaza, Newark, NJ 07102-5490 General Contact: http://www.panasonic.com/support Projector Contact: https://panasonic.net/cns/projector/

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Caution:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC Warning:

To assure continued compliance, follow the attached installation instructions. This includes using the provided power cord and shielded interface cables when connecting to computer or peripheral devices. Also, any

unauthorized changes or modications to this equipment could void the user’s authority to operate this device.

FCC NOTICE (USA and Canada)

This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation of this device. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment has been approved for mobile operation and requires minimum 20 cm spacing be provided

between antennas and all person’s body (excluding extremities of hands, wrist and feet) during wireless modes

of operation. This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC and IC require this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this product.

The available scientic evidence does not show that any health problems are associated with using low power

wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless

devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does

not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested

that some biological effects might occur, but such ndings have not been conrmed by additional research.

Wireless LAN adaptor has been tested and found to comply with FCC/IC radiation exposure limits set forth for

an uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in KDB 447498 D01 and RSS-102 of the IC radio frequency (RF) Exposure rules.

Product Identication Marking is located on the bottom of the Wireless LAN Adaptor.

6 - ENGLISH

Read this rst!

Federal Communication Commission (FCC) / IC Radiation Exposure Statement

This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1999/

IC RSS-102 and had been tested in accordance with the measurement methods and procedures specied in

KDB 447498 D01. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.

CAUTION:

Be aware of the following limits before using the Wireless LAN Module.

• To use the Wireless LAN Module, an access point needs to be obtained.

• Do not use the Wireless LAN Module to connect to any wireless network (SSID*) for which you do not have usage rights. Such networks may be listed as a result of searches. However, using them may be regarded as illegal access.

*SSID is a name for identifying a particular wireless network for transmission.

• Do not subject the Wireless LAN Module to high temperatures, direct sunlight or moisture.

• Do not bend, or subject the Wireless LAN Module to strong impacts.

• Do not disassemble or alter the Wireless LAN Module in any way.

• Do not attempt to install the Wireless LAN Module in any incompatible device.

• Do not remove the Wireless LAN Module from the host product during operations.

• Data transmitted and received over radio waves may be intercepted and monitored.

• To avoid malfunctions caused by radio wave interface, keep the host product away from the devices such as other wireless LAN devices, microwaves and the devices that use 2.4 GHz and 5 GHz signals when using the Wireless LAN Module.

• When noises occur due to the static electricity, etc., the projector might stop operating for the protection of the devices. In this case, turn the projector Off and disconnect the power plug from the wall outlet, then turn it on again.

• Depending on the area, this Wireless LAN Module may not be available.

NOTIFICATION (Singapore)

• Complies with IDA Standards ID : DB01017

NOTIFICATION (UAE)

• This equipment has been registered with the Telecommunications Regulatory Authority for use in the UAE.

TRA

REGISTERED No: ER0119239/13 DEALER No: DA0081667/12

ENGLISH - 7

Read this rst!

IMPORTANT: THE MOULDED PLUG

FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse

is tted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating

of 13 amps and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark or the BSI mark on the body of the fuse.

If the plug contains a removable fuse cover, you must ensure that it is retted when the fuse is replaced. If you

lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from an Authorised Service Center.

If the tted moulded plug is unsuitable for the mains socket in your home, then the fuse should be removed and

the plug cut off and disposed of safely. There is a danger of severe electrical shock if the cut off plug is inserted into any 13 amp socket.

If a new plug is to be tted, please observe the wiring code as shown below. If in any doubt, please consult a qualied electrician.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

IMPORTANT:

As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows.

How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse.

The wires in this mains lead are coloured in accordance with the following code:

Green - and - Yellow: Earth Blue: Neutral

Brown: Live

The wire which is coloured GREEN - AND - YELLOW must be connected to the terminal in the plug which is marked with the letter E or by the Earth symbol or coloured GREEN or GREEN -

AND - YELLOW. The wire which is coloured BLUE must be connected to the terminal in the plug which is marked

with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the letter L or coloured RED.

Importer's name and address within the European Union Panasonic Marketing Europe GmbH Panasonic Testing Centre Winsbergring 15, 22525 Hamburg, Germany

8 - ENGLISH

Read this rst!

WARNING:

 POWER

The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily accessible when problems occur. If the following problems occur, cut off the power supply immediately.

Continued use of the projector in these conditions will result in re or electric shock.

z If foreign objects or water get inside the projector, cut off the power supply. z If the projector is dropped or the cabinet is broken, cut off the power supply. z If you notice smoke, strange smells or noise coming from the projector, cut off the power supply.

Please contact an Authorized Service Center for repairs, and do not attempt to repair the projector yourself.

During a thunderstorm, do not touch the projector or the cable.

Electric shocks can result.

Do not do anything that might damage the power cord or the power plug.

If the power cord is used while damaged, electric shocks, short-circuits or re will result.

zDo not damage the power cord, make any modications to it, place it near any hot objects, bend it

excessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle.

Ask an Authorized Service Center to carry out any repairs to the power cord that might be necessary.

Completely insert the power plug into the wall outlet and the power connector into the projector terminal.

If the plug is not inserted correctly, electric shocks or overheating will result.

z Do not use plugs which are damaged or wall outlets which are coming loose from the wall.

Do not use anything other than the provided power cord.

Failure to observe this will result in re or electric shocks. Please note that if you do not use the provided power

cord to ground the device on the side of the outlet, this may result in electric shocks.

Clean the power plug regularly to prevent it from becoming covered in dust.

Failure to observe this will cause a re.

zIf dust builds up on the power plug, the resulting humidity can damage the insulation. zIf not using the projector for an extended period of time, pull the power plug out from the wall outlet.

Pull the power plug out from the wall outlet and wipe it with a dry cloth regularly.

Do not handle the power plug and power connector with wet hands.

Failure to observe this will result in electric shocks.

Do not overload the wall outlet.

If the power supply is overloaded (ex., by using too many adapters), overheating may occur and re will result.

 ON USE/INSTALLATION

Do not place the projector on soft materials such as carpets or sponge mats.

Doing so will cause the projector to overheat, which can cause burns, re or damage to the projector.

Do not set up the projector in humid or dusty places or in places where the projector may come into contact with oily smoke or steam.

Using the projector under such conditions will result in re, electric shocks or deterioration of components. Oil

may also distort the plastic and the projector could fall such as when mounted on the ceiling.

Do not install this projector in a place which is not strong enough to take the full weight of the projector or on top of a surface which is sloped or unstable.

Failure to observe this will cause projector to fall down or tip over the projector, and severe injury or damage could result.

Installation work (such as ceiling mount bracket) should only be carried out by a qualied technician.

If installation is not carried out and secured correctly, it can cause injury or accidents, such as electric shocks.

z Be sure to use the wire provided with the ceiling mount bracket as an extra safety measure to prevent the

projector from falling down. (Install in a different location to the ceiling mount bracket.)

Do not cover the air intake/exhaust ports.

Doing so will cause the projector to overheat, which can cause re or damage to the projector.

z Do not place the projector in narrow, badly ventilated places. z Do not place the projector on cloth or papers, as these materials could be drawn into the air intake port. z Provide at least 1 m (39-3/8") of space between any walls or objects and the exhaust port, and at least

50 cm (19-11/16") of space between any walls or objects and the intake port.

ENGLISH - 9

Read this rst!

WARNING:

Do not place your hands or other objects close to the air exhaust port.

Doing so will cause burns or damage your hands or other objects.

z Heated air comes out of the air exhaust port. Do not place your hands or face, or objects which cannot

withstand heat close to this port.

Do not look at and place your skin into the lights emitted from the lens while the projector is being used.

Doing so can cause burns or loss of sight.

z Strong light is emitted from the projector’s lens. Do not look at or place your hands directly into this light. z Be especially careful not to let young children look into the lens. In addition, turn off the power and

disconnect the power plug when you are away from the projector.

Never attempt to remodel or disassemble the projector.

High voltages can cause re or electric shocks.

z For any inspection, adjustment and repair work, please contact an Authorized Service Center.

Do not allow metal objects, ammable objects, or liquids to enter inside of the projector. Do not allow

the projector to get wet.

Doing so may cause short circuits or overheating, and result in re, electric shock, or malfunction of the

projector.

z Do not place containers of liquid or metal objects near the projector. z If liquid enters inside of the projector, consult your dealer. z Particular attention must be paid to children.

Use the ceiling mount bracket specied by Panasonic.

Using the ceiling mount bracket other than the specied one will result in falling accidents.

z Attach the supplied safety cable to the ceiling mount bracket to prevent the projector from falling down.

 ACCESSORIES

Do not use or handle the batteries improperly, and refer to the following.

Failure to observe this will cause burns, batteries to leak, overheat, explode or catch re.

z Do not use unspecied batteries. z Do not charge dry cell batteries. z Do not use chargeable batteries. z Do not disassemble dry cell batteries. z Do not heat the batteries or place them into water or re. z Do not allow the + and - terminals of the batteries to come into contact with metallic objects such as

necklaces or hairpins. z Do not store or carry batteries together with metallic objects. z Store the batteries in a plastic bag and keep them away from metallic objects. z Make sure the polarities (+ and -) are correct when inserting the batteries. z Do not use a new battery together with an old battery or mix different types of batteries. z Do not use batteries with the outer cover peeling away or removed.

Do not allow children to reach the batteries.

Accidentally swallowing them can cause physical harm.

z If swallowed, seek medical advice immediately.

If the battery uid leaks, do not touch it with bare hands, and take the following measures if necessary.

z Battery uid on your skin or clothing could result in skin inammation or injury.

Rinse with clean water and seek medical advice immediately. z Battery uid coming in contact with your eyes could result in loss of sight.

In this case, do not rub your eyes. Rinse with clean water and seek medical advice immediately.

Do not remove unspecied screws during the lamp unit replacement.

Doing so can cause electric shocks, burns, or injury.

Do not disassemble the lamp unit.

If the lamp breaks, it could cause injury.

10 - ENGLISH

Read this rst!

WARNING:

Lamp replacement

The lamp has high internal pressure. If improperly handled, an explosion and severe injury or accidents will result.

z The lamp can easily explode if struck against hard objects or dropped. z Before replacing the lamp unit, be sure to turn the power off and to disconnect the power plug from the wall

outlet. Electric shocks or explosions can result if this is not done. z When replacing the lamp, turn the power off and allow the lamp it to cool for at least 1 hour before handling

it otherwise it can cause burns.

Remove the depleted batteries from the remote control promptly.

z Leaving them in the unit may result in uid leakage, overheating, or explosion of the batteries.

CAUTION:

 POWER

When disconnecting the power cord, be sure to hold the power plug and power connector.

If the power cord itself is pulled, the lead will become damaged, and re, short-circuits or serious electric

shocks will result.

When not using the projector for an extended period of time, disconnect the power plug from the wall outlet.

Failure to do so may result in re or electric shock.

Disconnect the power plug from the wall outlet before carrying out any cleaning and replacing the unit.

Failure to do so may result in electric shock.

 ON USE/INSTALLATION

Do not place heavy objects on top of the projector.

Failure to observe this will cause the projector to become unbalanced and fall, which could result in damage or injury. The projector will be damaged or deformed.

Do not put your weight on this projector.

You could fall or the projector could break, and injury will result.

z Be especially careful not to let young children stand or sit on the projector.

Do not place the projector in extremely hot locations.

Doing so will cause the outer casing or internal components to deteriorate, or result in re.

z Take particular care in locations exposed to direct sunlight or near stoves.

Do not install the projector in a location where salt pollution or corrosive gas may occur.

Doing so may result in falling due to corrosion. Also, it may result in malfunctions.

Do not stand in front of the lens while the projector is being used.

Doing so can cause damage and burns to clothing.

z Strong light is emitted from the projector’s lens.

Do not place objects in front of the lens while the projector is being used.

Doing so can cause re, damage to an object, or malfunction of the projector.

z Strong light is emitted from the projector’s lens.

Always disconnect all cables before moving the projector.

Moving the projector with cables still attached can damage the cables, which will cause re or electric shocks to

occur.

When mounting the projector on the ceiling, keep mounting screws and power cord from contact with metal parts inside the ceiling.

Contact with metal parts inside the ceiling can cause electric shocks.

Never plug headphones and earphones into <VARIABLE AUDIO OUT> terminal.

Excessive sound pressure from earphones and headphones can cause hearing loss.

Do not project an image with the lens cap attached.

Doing so can cause re.

ENGLISH - 11

Read this rst!

CAUTION:

 ACCESSORIES

Do not use the old lamp unit.

If used it could cause lamp explosion.

If the lamp has broken, ventilate the room immediately. Do not touch or bring your face close to the broken pieces.

Failure to observe this will cause the user to absorb the gas which was released when the lamp broke and

which contains nearly the same amount of mercury as uorescent lamps, and the broken pieces will cause

injury.

z If you believe that you have absorbed the gas or that the gas has got into your eyes or mouth, seek medical

advice immediately. z Ask your dealer about replacing the lamp unit and check the inside of the projector.

When not using the projector for an extended period of time, remove the batteries from the remote control.

Failure to observe this will cause the batteries to leak, overheat, catch re or explode, which may result in re

or contamination of surrounding area.

 MAINTENANCE

Do not attach the air lter unit while it is wet.

Doing so may result in electric shock or malfunctions.

z After you clean the air lter units, dry them thoroughly before reattaching them.

Ask your dealer about cleaning inside the projector once a year.

Continuous use while dust is accumulated inside the projector may result in re.

z For cleaning fee, ask your dealer.

12 - ENGLISH

(ii)

(i)

Read this rst!

To remove the battery

1. Press the guide and lift the cover. 2. Remove the batteries.

(ii)

(i)

Brazil Only Brasil Apenas

Manuseio de baterias usadas

BRASIL

Após o uso, as pilhas e /ou baterias deverão ser entregues ao estabelecimento comercial ou rede de assistência técnica autorizada.

Cobrir os terminais positivo (+) e negativo (-) com uma fita isolante adesiva, antes de depositar numa

caixa destinada para o recolhimento. O contato entre partes metálicas pode causar vazamentos,

gerar calor, romper a blindagem e produzir fogo. (Fig. 1)

Fig. 1 Como isolar os terminais

Não desmonte, não remova o invólucro, nem amasse a bateria. O gás liberado pela bateria pode irritar a

garganta, danicar o lacre do invólucro ou o vazamento provocar calor, ruptura da blindagem e produzir fogo devido ao curto circuito dos terminais. Não incinere nem aqueça as baterias, elas não podem car expostas a temperaturas superiores a 100 °C (212 °F). O gás liberado pela bateria pode irritar a garganta, danicar o lacre

do invólucro ou o vazamento provocar calor, ruptura da blindagem e produzir fogo devido ao curto circuito dos terminais provocado internamente. Evite o contato com o liquido que vazar das baterias. Caso isto ocorra, lave bem a parte afetada com bastante água. Caso haja irritação, consulte um médico.

Fita Isolante

Remoção das baterias

1. Pressione a guia e levante a tampa. 2. Remova as baterias.

Telecomunicações de rádio

Esse equipamento possui aprovação para telecomunicações de radio. 3503-14-1110

Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo e não pode causar interferência a sistemas operando em caráter primário.

ENGLISH - 13

Declaration of Conformity

English Declaration of Conformity (DoC)

This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Customers can download a copy of the original DoC for this product from our DoC server: http://www.ptc.panasonic.de Contact in the EU: Panasonic Marketing Europe GmbH, Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg,

Germany This product is intended to be used in the following countries. Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,

Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, United Kingdom

Français Déclaration de Conformité (DoC)

Cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la Directive 1999/5/CE. Les clients peuvent télécharger une copie de la DoC originale pour ce produit à partir de notre serveur DoC: http://www.ptc.

panasonic.de

Coordonnées dans l’UE : Panasonic Marketing Europe GmbH, Panasonic Testing Centre, Winsbergring 15, 22525

Hamburg, Germany

Ce produit est conçu pour l’utilisation dans les pays suivants.

Autriche, Belgique, Bulgarie, Croatie, Chypre, République Tchèque, Danemark, Estonie, Finlande, France, Allemagne, Grèce, Hongrie, Islande, Irlande, Italie, Lettonie, Liechtenstein, Lituanie, Luxembourg, Malte, Pays-Bas, Norvège, Pologne, Portugal, Roumanie, Slovaquie, Slovénie, Espagne, Suède, Suisse, Royaume-Uni

Read this rst!

Español

Declaración de conformidad (DoC)

Este equipo cumple con los requisitos esenciales asi como con otras disposiciones de la Directiva 1999/5/CE. El cliente puede descargar una copia de la DoC original de este producto desde nuestro servidor DoC: http://www.ptc.

panasonic.de Contacto en la U.E.: Panasonic Marketing Europe GmbH, Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg,

Germany Este producto ha sido desarrollado para el uso en los siguientes países. Austria, Bélgica, Bulgaria, Croacia, Chipre, República Checa, Dinamarca, Estonia, Finlandia, Francia, Alemania, Grecia,

Hungría, Islandia, Irlanda, Italia, Letonia, Liechtenstein, Lituania, Luxemburgo, Malta, Holanda, Noruega, Polonia, Portugal, Rumania, Eslovaquia, Eslovenia, España, Suecia, Suiza, Reino Unido

Deutsch Konformitätserklärung (DoC)

Dieses Gerät entspricht den grundlegenden Anforderungen und den weiteren entsprechenden Vorgaben der Richtlinie 1999/5/EG.

Kunden können eine Kopie der Original-DoC für dieses Produkt von unserem DoC-Server herunterladen: http://www.ptc. panasonic.de

Kontaktadresse in der EG: Panasonic Marketing Europe GmbH, Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Germany

Dieses Produkt ist für den Einsatz in den folgenden Ländern vorgesehen. Österreich, Belgien, Bulgarien, Kroatie, Zypern, Tschechische Republik, Dänemark, Estland, Finnland, Frankreich,

Deutschland, Griechenland, Ungarn, Island, Irland, Italien, Lettland, Liechtenstein, Litauen, Luxemburg, Malta, Niederlande, Norwegen, Polen, Portugal, Rumänien, Slowakei, Slowenien, Spanien, Schweden, Schweiz, Großbritannien

Italiano Dichiarazione di conformità (DoC)

Questo apparato é conforme ai requisiti essenziali ed agli altri principi sanciti dalla Direttiva 1999/5/CE. I clienti possono scaricare la copia del DoC originale per questo prodotto dal nostro server DoC: http://www.ptc.panasonic.de Contatto nella EU: Panasonic Marketing Europe GmbH, Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg,

Germany

I prodotti sono stati prodotti per l’uso nei seguenti paesi.

Austria, Belgio, Bulgaria, Croazia, Cipro, Repubblica Ceca, Danimarca, Estonia, Finlandia, Francia, Germania, Grecia, Ungheria, Islanda, Irlanda, Italia, Lettonia, Liechtenstein, Lituania, Lussemburgo, Malta, Olanda, Norvegia, Polonia, Portogallo, Romania, Slovacchia, Slovenia, Spagna, Svezia, Svizzera, Regno Unito

14 - ENGLISH

Read this rst!

page15

Български

Čeština

Dansk

Eesti

Ελληνικά

Hrvatski

Íslenska

Latviešu

Lietuvių

Magyar

Това устройство отговаря на съществените изисквания и останалите приложими разпоредби на Директива 1999/5/ЕО.

Toto zařízení je v souladu se základními požadavky a ostatními odpovídajícími ustanoveními Směrnice 1999/5/ES.

Dette udstyr er i overensstemmelse med de væsentlige krav og andre relevante bestemmelser i Direktiv 1999/5/EF.

See seade vastab direktiivi 1999/5/EÜ olulistele nõuetele ja teistele asjakohastele sätetele.

Αυτός ο εξοπλισμός είναι σε συμμόρφωση με τις ουσιώδεις απαιτήσεις και άλλες σχετικές διατάξεις της Οδηγίας 1999/5/ΕK.

Ovaj proizvod odgovara bitnim zahtjevima i drugim relevantnim uredbama Direktive 1999/5/ EZ.

Þetta tæki er samkvæmt grunnkröfum og öðrum viðeigandi ákvæðum Tilskipunar 1999/5/EC.

Ši iekārtā atbilst Direktīvas 1999/5/EK būtiskajam prasībām un citiem arto saistītajiem

noteikumiem.

Šis įrenginys tenkina 1999/5/EB Direktyvos esminius reikalavimus ir kitas šios direktyvos

nuostatas.

Ez a készülék teljesíti az alapvető követelményeket és más 1999/5/EK irányelvben

meghatározott vonatkozó rendelkezéseket.

Malti

Nederlands

Norsk

Polski

Português

Română

Slovenčina

Slovenščina

Suomi

Svenska

Dan l-apparat huwa konformi mal-ħtiġiet essenzjali u l-provedimenti l-oħra rilevanti tad-

Direttiva 1999/5/KE.

Dit apparaat voldoet aan de essentiele eisen en andere van toepassing zijnde bepalingen van de Richtlijn 1999/5/EG.

Dette utstyret er i samsvar med de grunnleggende krav og andre relevante bestemmelser i EU-direktiv 1999/5/EF.

Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami określonymi Dyrektyvą UE: 1999/5/WE.

Este equipamento está em conformidade com os requisitos essenciais e outras provisões relevantes da Directiva 1999/5/CE.

Acest echipament este conform cu cerinţele de bază şi celelalte prevederi relevante ale

Directivei 1999/5/CE.

Toto zariadenie je v zhode so základnými poiadavkami a inými príslušnými nariadeniami

direktív: 1999/5/ES.

Ta naprava je skladna z bistvenimi zahtevami in ostalimi relevantnimi pogoji Direktive 1999/5/ ES.

Tämä laite täyttää direktiivin 1999/5/EY olennaiset vaatimukset ja on siinä asetettujen muiden laitetta koskevien määräysten mukainen.

Denna utrustning ăr i overensstămmelse med de văsentliga kraven och andra relevanta

bestammelser i Direktiv 1999/5/EG.

ENGLISH - 15

r Trademarks, etc.

f The terms HDMI and HDMI High-Denition Multimedia Interface, and the HDMI Logo are trademarks or

registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. f PJLink™ is a trademark or pending trademark in Japan, the United States, and other countries and regions. f RoomView, Crestron RoomView are registered trademarks of Crestron Electronics, Inc, and Crestron

Connected™ and Fusion RV are trademarks of Crestron Electronics, Inc. f HDBaseTTM is a trademark of HDBaseT Alliance. f Wi-Fi®, Wi-Fi DirectTM and MiracastTM are registered trademarks or trademarks of Wi-Fi Alliance. f Windows, Internet Explorer and Microsoft Edge are registered trademarks or trademarks of Microsoft

Corporation in the United States and other countries. f Mac, Mac OS, iPad, iPhone, iPod touch and Safari are trademarks of Apple Inc., registered in the United States

and other countries. f IOS is a trademark and registered trademark of Cisco in the United States and other countries and is used

under license. f Android is a trademark of Google Inc. f QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and in other countries. f Adobe, Adobe Flash Player and Adobe Reader are trademarks or registered trademarks of Adobe Systems Inc.

in the United States and/or other countries. f Some of the fonts used in the on-screen menu are Ricoh bitmap fonts, which are manufactured and sold by Ricoh

Company, Ltd. f This product is licensed under AVC Patent Portfolio License, VC-1 Patent Portfolio License, and MPEG-4 Visual

Patent Portfolio License, and following actions except for the personal or non-prot use are not licensed.

g Recording the image information in compliance with the AVC standard, the VC-1 standard, and the MPEG-4

Visual standard (AVC/VC-1/MPEG-4 video hereafter)

g Playing back the AVC/VC-1/MPEG-4 video recorded by consumer practicing in a private activity, or AVC/VC-1/

MPEG-4 video acquired from the licensed provider

For details, refer to the website of MPEG LA, LLC (http://www.mpegla.com).

f Other names, company names or product names used in these operating instructions are the trademarks or

registered trademarks of their respective holders.

Please note that the operating instructions do not include the ® and ™ symbols.

Software information regarding this product

This product incorporates the following software.

(1) The software which is developed independently by or for Panasonic Corporation (2) The software owned by third party and licensed to Panasonic Corporation (3) The software which is licensed under the GNU GENERAL PUBLIC LICENSE Version2.0 (GPL V2.0) (4) The software which is licensed under the GNU LESSER GENERAL PUBLIC LICENSE Version2.1 (LGPL

V2.1)

(5) Open source software which is not licensed under the GPL V2.0 and LGPL V2.1 The software categorized as (3) ~ (5), the license is available in accordance with gnu general public license and

gnu lesser general public license respectively, it is distributed in the hope that it will be useful, but without any

warranty, without even the implied warranty of merchantability or tness for a particular purpose. As for the terms

and conditions, please refer to the software license of the supplied CD-ROM.

If you wish to ask any questions as to the software, please contact (sav.pj.gpl.pavc@ml.jp.panasonic.com) by

email.

r Illustrations in these operating instructions

f Note that illustrations of the projector and screens may differ from the ones you actually see. f The illustrations displayed on the computer screen may differ depending on the computer type and its operating

system.

r Page references

f Reference pages in this manual are indicated as: (Æ page 00).

r Term

f In this manual, the “Wireless remote control unit” accessory is referred to as the “Remote control”.

16 - ENGLISH

Features of the Projector

Quick Steps

Excellent Basic Performance

▶ Unique optical system, lamp dimming

system and the DAYLIGHT VIEW function allow you to project a good-quality image even in a bright room.

▶ It has many useful functions such as

compact design for portability and multiple input interface etc.

Easy Setup

▶ The adoption of 1.6x optical zoom and the

lens shift function ensures highly exible

setup of the projector.

▶ KEYSTONE, CORNER CORRECTION and

CURVED CORRECTION functions allow easy correction of various image distortions occurred in the installation location.

Maintenance cost down

For details, refer to the corresponding pages.

1. Set up your projector. (Æ page 34)

2. Connect with external devices. (Æ page 39)

3. Connect the power cord. (Æ page 45)

4. Power on. (Æ page 46)

▶ The long life lamp with new lamp driving

system and the water wash enabled

long life lter have greatly reduced the

maintenance time and the cost.

Multi-device Connect Extensions

▶ With the image transfer application

software, you can project the screen of various devices easily via the wireless LAN. The MIRRORING function that can project the screen of Miracast compatible devices via wireless LAN is also supported.

▶ It is equipped with the Moderator mode

that can easily switch between the device screens of multiple participants. It can apply to various presentation scenes and enliven the discussions.

5. Make initial settings. (Æ page 47)

fTake this step when you power on for the rst time after

purchasing the projector.

6. Select the input signal. (Æ page 51)

7. Adjust the image. (Æ page 53)

ENGLISH - 17

Chapter 1 Preparation

This chapter describes things you need to know or check before using the projector.

18 - ENGLISH

Chapter 1 Preparation - Precautions for use

Precautions for use

Cautions when transporting

f When transporting the projector, hold it securely by its bottom and avoid excessive vibration and impacts. Doing

so may damage the internal parts and result in malfunctions.

f Do not transport the projector with the adjustable feet extended. Doing so may damage the adjustable feet.

Cautions when installing

r Do not set up the projector outdoors.

The projector is designed for indoor use only.

r Do not use under the following conditions.

f Places where vibration and impacts occur such as in a car or vehicle: Doing so may damage the internal parts

and result in malfunctions.

f Location close to sea or where corrosive gas may occur: the projector may fall due to corrosion. Also, failure to

do so may shorten the life of the components and result in malfunction.

f Near the exhaust of an air conditioner: Depending on the conditions of use, the screen may uctuate in rare

cases due to the heated air from the air exhaust port or the hot or cooled air. Make sure that the exhaust from the projector or other equipment, or the air from the air conditioner does not blow toward the front of the projector.

f Places with sharp temperature uctuations such as near lights (studio lamps): Doing so may shorten the life of

the luminous lamp, or result in deformation of the outer case due to heat, which may cause malfunction. Make sure to observe the operating temperature range of the projector.

f Near high-voltage power lines or near motors: Doing so may interfere with the operation of the projector.

r Be sure to ask a specialized technician or your dealer when installing the product to a

ceiling.

This requires an optional ceiling mount bracket. Be sure to use the Projector Mount Bracket together with the ceiling mount bracket for high ceilings or low ceilings.

Model No.:

① ET-PKL100H (for high ceilings), ET-PKV400B (Projector Mount Bracket) ② ET-PKL100S (for low ceilings), ET-PKV400B (Projector Mount Bracket)

r Ask a qualied technician or your dealer to install the cable wiring for DIGITAL LINK

connection.

Image and sound may be disrupted if cable transmission characteristics cannot be obtained due to inadequate installation.

r The projector may not work properly due to strong radio wave from the broadcast

station or the radio.

If there is any facility or equipment which outputs strong radio waves near the installation location, install the

projector at a location sufciently far from the source of the radio waves. Or, wrap the LAN cable connected to the

<DIGITAL LINK/LAN> terminal using a piece of metal foil or a metal pipe which is grounded at both ends.

r Focus adjustment

The projection lens is thermally affected by the light from the light source, making the focus unstable in the period just after switching on the power. It is recommended that the images are projected continuously for at least 30 minutes before the focus is adjusted.

r Do not install the projector at elevations of 2 700 m (8 858') or higher above sea level.

r Do not use the projector in a location that the ambient temperature exceed 40 °C

(104 °F).

Using the projector in a location that the altitude is too high or the ambient temperature is too high may shorten the life of the components or result in malfunctions.

The upper limit of the operating temperature of the projector varies depending on the altitudes of the operating environment.

ENGLISH - 19

Chapter 1 Preparation - Precautions for use

When using it at altitudes below 1 200 m (3 937') above sea level: 0 °C (32 °F) ~ 40 °C (104 °F) When using it at altitudes between 1 200 m (3 937') and 2 700 m (8 858') above sea level: 0 °C (32 °F) ~ 30 °C (86 °F).

r Do not tilt the projector or place it on its side.

Do not tilt the projector body more than approximately ±30 degrees longitudinally or ±15 degrees laterally. Over tilting may result in shortening the life of the components.

Within 30°

Within 15° Within 15°

Within 30°

Cautions when setting the projectors

f Use the adjustable feet only for the oor standing installation and for adjusting the angle. Using them for other

purposes may damage the projector.

f When installing the projector with a method other than the oor installation using the adjustable feet or the

ceiling installation, use the four screw holes for ceiling mount (as shown in the gure) to x the projector to the mount. For details about the screw hole position for ceiling mount, refer to “Screw hole specications for ceiling mount” (x page 179). (Screw diameter: M4, tapping depth inside the projector: 8 mm (5/16"), torque: 1.25 ± 0.2 N·m)

In such case, make sure that there is no clearance between the screw holes for ceiling mount on the projector

bottom and the setting surface by inserting spacers (metallic).

Screw holes for ceiling mount

(M4)

Adjustable feet

Positions of screw holes for ceiling mount and adjustable feet

f Do not stack the projectors. f Do not use the projector supported by its top. f Do not block the ventilation ports (intake and exhaust) of the projector. f Avoid heating and cooling air from the air conditioning system directly blow to the ventilation ports (intake and

exhaust) of the projector.

20 - ENGLISH

Chapter 1 Preparation - Precautions for use

over 500 mm

(19-11/16")

over 500 mm

(19-11/16")

over 1 000 mm

(39-3/8")

over 200 mm

(7-7/8")

f Do not install the projector in a conned space.

When placing the projector in a conned space, a ventilation and/or air conditioning system is required. Exhaust

heat may accumulate when the ventilation is not enough, triggering the protection circuit of the projector.

f Panasonic takes no responsibility for any damage to the product caused by an inappropriate choice of location

for installing the projector, even if the warranty period of the product has not expired.

Security

When using this product, take safety measures against the following incidents.

f Personal information being leaked via this product f Unauthorized operation of this product by a malicious third party f Interfering or stopping of this product by a malicious third party

Take sufcient security measures.

f Make your password as difcult to guess as possible. f Change your password periodically. The password can be set in the [SECURITY] menu → [PASSWORD

CHANGE] or the [NETWORK/USB] menu → [Panasonic APPLICATION] → [PASSWORD CHANGE].

f Panasonic Corporation or its afliate company never inquires a password directly to a customer. Do not tell your

password in case you receive such an inquiry. f The connecting network must be secured by rewall or others. f Set a password for web control function appropriately and restrict the users who can log in. The password for

the web control function can be set on the [Change password] page of the web control screen.

r Security cautions for using the wireless LAN product

The advantage of a wireless LAN is that information can be exchanged between a PC or other such equipment and an access point using radio waves as long as you are within range for radio transmissions.

On the other hand, because the radio waves can travel through obstacles (such as walls) and are available

everywhere within a given range, problems of the type listed below may occur if security-related settings are not

made sufciently.

f Communication content leak

The following communication information may be leaked by a malicious third-part who intentionally intercept the

transmitted data.

g Personal information such as your ID, password, and/or credit card numbers g The e-mail content

f Unauthorized access

A malicious third-party may access your personal or corporate network without authorization and engage in the

following types of behavior.

g Retrieve personal and/or secret information (information leak) g Spread false information by impersonating a particular person (spoong)

ENGLISH - 21

Chapter 1 Preparation - Precautions for use

g Overwrite intercepted communications and issue false data (tampering) g Spread harmful software such as a computer virus and crash your data and/or system (system crash)

Since most wireless LAN adapters or access points are equipped with security features to take care of these problems, you can reduce the possibility of these problems occurring when using this product by making the appropriate security settings for the wireless LAN device.

Some wireless LAN devices may not be set for security immediately after purchase. To decrease the possibility of occurrence of security problems, before using any wireless LAN devices, be absolutely sure to make all securityrelated settings according to the instructions given in the operation manuals supplied with them.

Depending on the specications of the wireless LAN, a malicious third-party may be able to break security settings

by special means. Panasonic advises customers to thoroughly understand the risk of using this product without making security

settings, and recommends that the customer make security settings at their own discretion and responsibility.

Notes on Using Wireless Connection

Wireless connection function of the projector uses radio waves in the 2.4 GHz / 5 GHz band. A radio station license is not required, but be sure to read and fully understand the following items before use.

r Do not use near other wireless equipment.

The following equipment may use radio waves in the same band as the projector. When the projector is used near these devices, radio wave interference may make communication impossible, or

the communication speed may become slower.

f Microwave ovens, etc. f Industrial, chemical and medical equipment, etc. f In-plant radio stations for identifying moving objects such as those used in factory manufacturing lines, etc. f Designated low-power radio stations

r If at all possible, avoid the use of cellular phones, TV sets or radios near the projector.

Cellular phones, TV sets, radios and similar devices use different radio bands from the projector, so there is no effect on wireless communication or the transmission and reception of these devices. However, radio waves from the projector may produce audio or video noise.

r Wireless communication radio waves cannot penetrate steel reinforcements, metal,

concrete, etc.

Communication is possible through walls and oors made from materials such as wood and glass (except glass containing wire mesh), but not through walls and oors made from steel reinforcements, metal, concrete, etc.

r Avoid using the projector in locations prone to static electricity.

If the projector is used in a location prone to static electricity, the wireless LAN or wired LAN connection may be lost.

If the static electricity or noise make it impossible to establish a connection with the LAN, disconnect the power plug from the outlet after turning off the projector power, eliminate the source of static electricity or noise, then turn on the projector.

r Using the projector outside the country

The wireless LAN function is forbidden when you use the projector outside the country or region where you purchased it. Note that depending on countries or regions, there are restrictions on the channels and frequencies at which you can use the wireless LAN.

z For North America

This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range (Channels 36 to

48).

z For EU

This device is restricted to indoor use when operated in the 5.15 to 5.35 GHz frequency range (Channels 36 to

64).

z For Malaysia

This device is restricted to use when operated in the 2.412 GHz (ch1) ~ 2.472 GHz (ch13), 5.725 GHz (ch149) ~

5.805 GHz (ch161) frequency range.

22 - ENGLISH

Chapter 1 Preparation - Precautions for use

DIGITAL LINK

“DIGITAL LINK” is a technology that uses a twisted-pair-cable to transmit video, audio, Ethernet, and serial control

signals. It is developed based on the communication standard of HDBaseTTM established by HDBaseT Alliance and added with other features of Panasonic.

This projector supports the optional Panasonic DIGITAL LINK output compatible device (Model No.: ET-YFB100G, ET-YFB200G) and peripheral devices by other manufacturers (twisted-pair-cable transmitters such as the “XTP transmitter” of Extron Electronics) that use the same HDBaseTTM standard. For the devices of other manufacturers that the operation has been veried with this projector, visit the Panasonic website (https://panasonic.net/cns/ projector/). Note that the verication for devices of other manufacturers has been made for the items set by Panasonic Corporation, and not all the operations have been veried. For operation or performance problems

caused by the devices of other manufacturers, contact the respective manufacturers.

Early Warning Software

The projector supports “Early Warning Software”, which monitors the status of the display devices (projector or at panel display) and the peripheral devices inside an intranet, and noties of abnormality of such equipment and

detects signs of possible abnormality. Also, maintenance can be performed in advance, because this software

gives notication of approximate time to replace consumables of the display, to clean each part of the display, and

to replace the components of the display. Depending on the type of license, the number of displays that can be registered for monitoring varies. Limited to

the rst 90 days after installation in a computer, it is possible to register up to 2048 units of displays free of charge. Download the software from the Panasonic website (https://panasonic.net/cns/projector/pass/). It is necessary to

*1 PASS: Panasonic Professional Display and Projector Technical Support Website Visit the Panasonic website (https://panasonic.net/cns/projector/pass/) for details.

Storage

When storing the projector, keep it in a dry room.

Disposal

To dispose of the product, ask your local authorities or dealer for correct methods of disposal. The luminous lamp contains mercury. When disposing of used lamp units, contact your local authorities or dealer

for correct methods of disposal.

Cautions on use

r To get a good picture quality

In order to view a beautiful image in higher contrast, prepare an appropriate environment. Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light from indoor lamps from shining onto the screen.

r Do not touch the surface of the projector lens with your bare hands.

If the surface of the lens becomes dirty from ngerprints or anything else, this will be magnied and projected onto

the screen. It is recommended to attach the supplied lens cap to the projection lens when you do not use the projector.

r LCD panel

The LCD panel is precision-made. Note that in rare cases, pixels could be missing or always lit. Note that such phenomena do not indicate malfunction.

If still images are projected for a long time, a residual image may remain on the LCD panel. In this case, project the all white screen for over an hour. Note that the residual image may not disappear.

r Optical parts

When the operating environment temperature is high or in environments where lots of dust, cigarette smoke, etc. is present, the replacement cycle of the LCD panel, polarizing plate and other optical parts may be shorter even if used for less than one year. Consult your dealer for details.

ENGLISH - 23

Chapter 1 Preparation - Precautions for use

r Luminous lamp

The light source of the projector is a high-pressure mercury lamp. A high-pressure mercury lamp has the following characteristics.

f The luminance of the luminous lamp will decrease by duration of usage. f The luminous lamp may burst with a loud sound or have its service life shortened because of shock, chipping, or

degradation due to cumulative runtime.

f The luminous lamp life varies greatly depending on individual differences and usage conditions. In particular,

continuous use for 12 hours or more and frequent off/on switching of the power greatly deteriorate the luminous

lamp and affect the luminous lamp life. f In rare cases, the luminous lamp burst shortly after the projection. f The risk of bursting increases when the luminous lamp is used beyond its replacement cycle. Make sure to

replace the lamp unit according to the proper replacement time . (“When to replace the lamp unit” (Æ page

154) and “How to replace the lamp unit” (Æ page 154))

f If the luminous lamp bursts, gas contained inside of the luminous lamp is released in a form of smoke. f It is recommended to store replacement lamps for contingency.

r Computer and external device connections

When connecting a computer or an external device, read this manual carefully regarding the use of power cords and shielded cables as well.

24 - ENGLISH

Chapter 1 Preparation - Precautions for use

Accessories

Make sure the following accessories are provided with your projector. Numbers enclosed < > show the number of accessories.

Wireless remote control unit <1> (N2QAYA000146)

Power cord

CD-ROM <1> (1JK1VZ585N)

AAA/R03 or AAA/LR03 battery <2>

(TXFSX02UXRZ)

(TXFSX02UYAZ) String <1>

(6103504711)

(for remote control unit)

(TXFSX02UFEZ)

Lens cap <1> (TKKL5573) (TKKL5577) (For PT-VZ585N) (For PT-VW545N and

PT-VX615N)

RGB signal cable <1> (K1HY15YY0012)

(Attached to the projector at the time of purchase)

Attention

f After unpacking the projector, discard the power cord cap and packaging material properly. f Do not use the supplied power cord for devices other than this projector. f For lost accessories, consult your dealer. f Store small parts in an appropriate manner, and keep them away from young children.

Note

(for lens cap)

f The type and number of the power cord depend on the country in which you purchased the product. f The model numbers of accessories are subject to change without prior notice.

ENGLISH - 25

Chapter 1 Preparation - Precautions for use

Contents of the supplied CD-ROM

The contents of the supplied CD-ROM are as follow.

Operating Instructions Operating Instructions – Multi Monitoring & Control Software Operating Instructions – Logo Transfer Software Operating Instructions – Wireless Manager ME6.4

Instruction / list (PDF)

Software

Note

f “Plug and Share”(Windows/Mac) is a software to transfer the computer screen via wireless LAN. By pairing the commercially available USB

memory with the projector, easy wireless connection can be achieved. For details of the pairing between the projector and the USB memory,

refer to “Using the Pairing function” (Æ page 147). The pairing process is to write the image transfer application software “Plug and Share”

and the connection information between the projector and the USB memory to the USB memory.

f The “List of Compatible Device Models” for the at panel display compatible with the “Multi Monitoring & Control Software” can be

downloaded from the Panasonic website (https://panasonic.net/cns/prodisplays/).

Operating Instructions – Plug and Share List of Compatible Device

Models

Software license

Multi Monitoring & Control

Software (Windows)

Logo Transfer Software

(Windows)

Wireless Manager ME6.4

(Windows/Mac)

This is a list of projectors that are compatible with the software contained in the CD-ROM and their restrictions.

The open source software licenses that used in this projector

in the PDF les.

This software allows you to monitor and control multiple displays

(projector or at panel display) connected to the LAN.

This software allows you to transfer original images, such as company logos to be displayed when projection starts, to the projector.

This software allows you to send computer screen displays over wireless/ wired LAN.

are included

Optional accessories

Options Model No.

Ceiling Mount Bracket

Replacement Lamp Unit ET-LAV400 Replacement Filter Unit ET-RFV410

Easy Wireless Stick*

Digital Interface Box ET-YFB100G DIGITAL LINK Switcher ET-YFB200G Early Warning Software

(Basic license/3-year license)

*1: This product can be purchased in the U.S., Canada, Japan, Australia and New Zealand.

*2: The sufx of the Model No. differs according to the license type.

Note

f The model numbers of optional accessories are subject to change without prior notice.

ET-PKL100H (for high ceilings), ET-PKL100S (for low ceilings), ET-PKV400B (Projector Mount Bracket)

ET-UW100

ET-SWA100 Series*

26 - ENGLISH

Chapter 1 Preparation - About your projector

About your projector

Remote control

Front

3 4

1 Remote control indicator

Flashes if any button in the remote control is pressed.

2 Power <v/b> button (v Standby / b Power on)

Sets the projector to the state where the projector is switched

off (standby mode). Also starts projection when the power is switched off (standby mode).

3 <AUTO SETUP/CANCEL> button

Used to perform automatic adjustment while projecting the

image (Æ page 57). It is also used to operate the Memory

Viewer screen, and the idle screen of MIRRORING input and Panasonic APPLICATION input.

4 <MENU> button / <RETURN> button / asqw buttons

/ <ENTER> button

Used to operate the menu screen. (Æ page 61)

The asqw buttons are also used to enter password or characters for [SECURITY].

5 <VOL +> button / <VOL -> button

Adjusts the volume level of the built-in speaker or the audio

output. (Æ page 56)

6 <DEFAULT> button

Resets the content of the sub-menu to the factory default.

(Æ page 62)

7 Input selection buttons (<MEMORY VIEWER> /

<MIRRORING> / <Panasonic APP> / <COMPUTER 1> / <COMPUTER 2> / <VIDEO> / <HDMI 1> / <HDMI 2> / <DIGITAL LINK>)

Switches the input signal to project. (Æ page 51)

8 Number (<1> - <6>) buttons

Used for entering an ID number in a multiple projector environment or a password.

Top

Bottom

9 <ID SET> button

Sets the ID number of the remote control in a multiple projector

environment. (Æ page 31)

10 <ID ALL> button

Used to simultaneously control all the projectors with one

remote control when using multiple projectors. (Æ page 31)

11 <SCREEN ADJ> button

Corrects the distortion of the projected image.

(Æ page 57)

12 <FUNCTION> button

Assigns a frequently used operation as a shortcut button.

(Æ page 58)

13 <D.ZOOM +> button / <D.ZOOM -> button

Zooms in and out the images. (Æ page 58)

14 <MUTE> button

Used to temporarily mute the projector. (Æ page 56)

15 <AV MUTE> button

Used to turn off the audio and video temporarily. (Æ page 56)

16 <FREEZE> button

Pauses the projected image and mute the audio temporarily.

(Æ page 57)

17 <P-TIMER> button

Operates the presentation timer function. (Æ page 59)

18 Remote control signal transmitter

19 Not available with this projector

ENGLISH - 27

Chapter 1 Preparation - About your projector

Attention

f Do not drop the remote control. f Avoid contact with liquids. f Do not attempt to modify or disassemble the remote control. f Please observe the following contents that are described on the back of the remote control unit (see the picture below).

g Do not use a new battery together with an old battery. g Do not use unspecied batteries. g Make sure the polarities (+ and -) are correct when inserting the batteries.

In addition, please read the contents that are related to batteries in the "Read this rst!".

1.Do not use old battery with new one.

2.Do not use batteries other than the type specified.

3.Be sure the batteries are inserted properly.

Caution label at the back of the remote control

Note

f The remote control can be used within a distance of about 7 m (22′11-5/8″) if pointed directly at the remote control signal receiver. The

remote control can control at angles of up to ± 30 ° vertically and ± 30 ° horizontally, but the effective control range may be reduced. f If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not operate correctly. f You can operate the projector by reecting the remote control signal on the screen. The operating range may differ due to the loss of light

caused by the properties of the screen. f When the remote control signal receiver is lit with a uorescent light or other strong light source, the projector may become inoperative. Set

the projector as far from the luminous source as possible.

Projector body

r Front

1 2 3

4 5

r Rear

6 76

: Projection direction



r Side

10 118 9

WARNING

Keep your hands and other objects away from the air exhaust port.

f Keep your hands and face away. f Do not insert your ngers. f Keep heat-sensitive objects away.

Heated air from the air exhaust port can cause burns, injury, or deformations.

1 Remote control signal receiver

2 Focus Lever

Adjusts the focus.

28 - ENGLISH

3 Zoom Lever

Adjusts the zoom.

4 Adjustable feet

Adjusts the projection angle.

5 Projection Lens

6 Air exhaust port

7 Speaker

8 <AC IN> terminal

Connects the supplied power cord.

9 Security slot

This security slot is compatible with the Kensington security cables.

10 Burglar hook port

Attaches a burglar prevention cable, etc.

Chapter 1 Preparation - About your projector

11 Connecting terminals (Æ page 30)

12 Air lter cover

r To p

2 3

: Projection direction



1 Vertical lens shift dial

Adjusts the projecting position in the vertical direction (vertical

shift).

2 Control panel and Indicators (Æ page 29)

The air lter unit is inside.

13 Air intake port

r Bottom

3 Lamp cover

The luminous lamp is inside.

4 Air exhaust port

5 Burglar hook port

Attaches a burglar prevention cable, etc.

Attention

f Do not block the ventilation ports (intake and exhaust) of the projector.

r Control panel and Indicators

1 Power button <v/b> (v Standby / b Power on)

Sets the projector to the state where the projector is switched

off (standby mode). Also starts projection when the power is switched off (standby mode).

2 Power indicator <ON(G)/STANDBY(R)>

Displays the status of the power.

3 Lamp indicator <LAMP>

Displays the status of the luminous lamp.

4 Temperature indicator <TEMP>

Displays the status of the internal temperature.

5 Ambient luminance sensor (Æ page 67)

6 <MENU> button

Displays or hides the main menu. (Æ page 61)

When the sub menu is displayed, pressing it will return to the previous screen.

7 <ENTER> button

Determines and executes an item in the menu screen.

8 <INPUT SELECT> button

Switches the input signal to project. (Æ page 51)

9 asqw buttons

Used to select the menu screen items, switch the setting or adjust the level. Also used to enter a password in the [SECURITY] menu or enter characters

10 <AUTO SETUP/CANCEL> button

Used to automatically adjust with auto setup function while

projecting the image (Æ page 57). It is also used to operate

the Memory Viewer screen and the idle screen of MIRRORING input and Panasonic APPLICATION input.

ENGLISH - 29

r Connecting terminals

1 2 3 4 5 6

Chapter 1 Preparation - About your projector

7 8 9

1 <COMPUTER 2 IN/1 OUT> terminal

This is the terminal to input RGB signals or YCBCR/YPBPR signals. It can also output the signals input from <COMPUTER 1 IN> terminal to an external device.

2 <COMPUTER 1 IN> terminal

This is the terminal to input RGB signals or YCBCR/YPBPR signals.

3 <HDMI 1 IN> terminal / <HDMI 2 IN> terminal

These are the terminals to input HDMI signal.

4 <USB B (DISPLAY)> terminal

This terminal is used to connect the projector to the computer with a USB cable when you want to use the USB display function

of the application software "Wireless Manager ME6.4". For details, refer to the "Operating Instructions-Wireless Manager ME6.4" in the CD-ROM.

5 <USB A (VIEWER)> terminal

This is the terminal to attach the USB memory when using the Memory Viewer function or the Pairing function.

(Æ pages 140, 147)

6 <DIGITAL LINK/LAN> terminal

This is a terminal to connect a device that transfer video signal or audio signal via the LAN terminal. Also, this is the LAN terminal to connect to the network.

7 <SERIAL IN> terminal

This is the RS-232C compatible terminal to externally control the projector by connecting a computer.

8 <VIDEO IN> terminal

This is the terminal to input video signals.

9 <AUDIO IN 3> terminal

This is the terminal to input audio signals. Left input <L> and right input <R> are provided for the <AUDIO IN 3> terminal.

10 <AUDIO IN 1> terminal / <AUDIO IN 2> terminal

These are the terminals to input audio signals.

11 <VARIABLE AUDIO OUT> terminal

This is the terminal to output the input audio signal.

Attention

f When a LAN cable is directly connected to the projector, the network connection must be made indoors.

30 - ENGLISH

+ 151 hidden pages